NEC NP3150, NP1150, NP2150 User Manual

0 (0)

NEC Projector

NP3150 / NP2150 / NP1150

Wired and Wireless Network Setup Guide

1.What You Can Do with User Supportware 5

2.Operating Environment

1

2

3.Connecting LAN Cable

4.Setting the LAN Setting of Projector

5.Setting the LAN Setting of Personal

Computer ([Example] Wireless LAN of Windows Vista : Ad Hoc connection)

6.Setting the LAN Setting of Personal

Computer ([Example] Wireless LAN of Windows XP:Ad Hoc connection)

7.Refer to “User’s Guide” and Help

3

4

5

6

7

Install in the PC the software stored in the User Supportware 5 CD-ROM.

This manual describes the LAN settings to use the software programs included in the supplied User Supportware 5 CD-ROM. For how to operate each software program, refer to “User’s Guide” (PDF) on User Supportware 5 CD-ROM.

Introduction

Thank you for purchasing the NEC projector NP3150/NP2150/NP1150 (hereafter referred to as the “projector”).

The projector is equipped with the following features so that you can give effective presentations.

LAN port (RJ-45), USB Wireless LAN Unit, USB port (type A), supplied as standard

Windows Vista standard functions Network Projector and Remote Desktop can be used.

Viewer that displays images from a USB memory device*1

*1 The projector is not supplied with a USB memory device.

The projector is also supplied with User Supportware 5 CD-ROM in which five programs of software are stored for effective use of these features. The software stored on this CD-ROM are as follows.

Each program runs on Windows Vista, Windows XP or Windows 2000.

Install in the PC the software in the User Supportware 5 CD-ROM before using.

Image Express Utility 2.0

Desktop Control Utility 1.0

Ulead Photo Explorer 8.0 SE Basic

Viewer PPT Converter 3.0

PC Control Utility 3.0

This document explains how to configure the LAN settings to use the above software programs. For details of operations, refer to “User Supportware 5 User’s Guide” on User Supportware 5 CD-ROM and help function of the software.

For the network settings on the personal computer, refer to the User’s Manual for the personal computer or the peripheral equipment for the network.

Use a wireless LAN card conforming to the Wi-Fi standard for your personal computer.

Information on USB Wireless LAN:

The NP3150/NP2150/NP1150 series projectors distributed in some areas and countries do not come standard with the USB Wireless LAN Unit.

If you purchase the projector without the USB Wireless LAN Unit installed and need to present to the projector via a wireless connection, the optional USB Wireless LAN Unit must be installed.

NOTES

(1)The contents of this guide may not be reprinted in part or whole without permission.

(2)The contents of this guide are subject to change without notice.

(3)Great care has been taken in the preparation of this guide; however, should you notice any questionable points, errors or omissions, please contact us.

(4)Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

(5)Guides with incorrect collating or missing pages will be replaced.

Important Information

Important Information

USB Wireless LAN Unit

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested to comply with the limits for a Class B personal computer and peripheral, pursuant to Subpart B of Part 15 of FCC Rules. Only peripherals (computer input/ output devices, terminals, printers, etc.) certified (DoC) or verified to comply with Class B limits may be attached to this equipment. Operation with noncertified (DoC) or non-verified personal computer and/or peripherals is likely to result in Interference to radio and TV reception.

The connection of a unshielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which Exceed the limits established by FCC for equipment.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Regulatory Information/Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product.Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.

3

Important Information

To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 7.87"/20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop computer with USB slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule and such use shall be prohibited.

Usage restrictions in North America

The following channels can be used indoors only.

In the United States and Canada: 36, 40, 44, and 48 channels

In Mexico:149, 153, 157, 161, and 165 channels

The other channels can be used both indoors and outdoors.

This Class B digital apparatus complies with Canadian RSS-210.

Cet appareil numerique de la Classe B est conforme a la norme CNR-210 du Canada.

To comply with Canada RSS-210 (Issue 7) section A9.4 (b) (ii); this radio product will not transmit on any channels operating in the exclusion band of 5600 - 5650MHz. All channels in the 5600 ~ 5650MHz band will be disabled by factory firmware and is not user changeable.

Regulatory Statement:

Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied.

France:

Outdoor use limited to 10mW e.i.r.p. within the band 2454 – 2483.5 MHz. Derogation in French overseas departments of Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz.

Hereby, NEC Display Solutions, Ltd. declares that this USB Wireless LAN Unit (Model: NP01LM) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Cautions on security when using wireless LAN products

With a wireless LAN, radio waves are used instead of LAN cables for the exchange of data between the wireless access points (computers, etc.), offering the advantage that LAN connections can be made freely within the range of the radio waves.

On the other hand, the radio waves reach all points within this range, regardless of walls or other obstacles, possibly resulting in the problems described below if the proper security measures are not taken.

Contents of transmissions may be intercepted

Malicious third parties may purposely intercept the radio waves and steal information contained in the transmissions, including such personal information as ID numbers, passwords, credit card numbers, e-mail messages, etc.

4

Important Information

Improper intrusions

Malicious third parties may without permission access the personal or company network and steal personal or confidential information, pretend to be someone else and leak incorrect information, rewrite information that has been intercepted, introduce computer viruses or otherwise damage data or the system, etc.

Wireless LAN cards and wireless access points generally include security measures for dealing with these problems. Making the proper security settings before using the products can reduce the risk of such problems arising.

We recommend that you fully understand the problems that can arise when using the products without making the security settings, then that you make the security settings based on your own decision and at your own discretion.

Cautions on Usage

The USB Wireless LAN Unit is not meant for use with facilities or equipment involving the safeguard of human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment, transportation facilities or equipment, etc., or with facilities or equipment requiring high levels of reliability. Do not use the USB Wireless LAN Unit in such cases.

Do not use the USB Wireless LAN Unit near cardiac pacemakers.

Do not use the USB Wireless LAN Unit near medical equipment. Doing so may cause electromagnetic interference with the medical equipment, possible leading to death.

Do not disassemble or modify the USB Wireless LAN Unit in any way. Doing so could lead to fire or electric shock.

Do not use the USB Wireless LAN Unit in wet or moist places, such as in bathrooms or near humidifiers. Doing so could lead to fire, electric shock or malfunction.

To prevent damage due to static electricity, eliminate any static electricity from your body before touching the USB Wireless LAN Unit.

Static electricity from the human body may damage the USB Wireless LAN Unit. Before touching the USB Wireless LAN Unit, touch an aluminum sash, a door knob, or some other metal object around you to eliminate the static electricity.

The radio waves used by the USB Wireless LAN Unit pass through the wood or glass used in normal homes (but not through window panes with built-in metallic mesh).

The radio waves do not pass through iron reinforcing bars, metal or concrete, however, so the USB Wireless LAN Unit cannot be used for communicating through walls or floors made with these materials.

5

Specifications

Specifications

For United States, Canada, and Mexico

Product Name

NP01LM3

 

 

 

Operating Voltage

5V (power supplied from the projector)

 

 

 

Max Amps

Tx: 472 mA (Max)

 

 

Rx: 300 mA (Max)

 

 

 

Wireless Standard

IEEE802.11a, IEEE802.11b, IEEE802.11g

 

 

Modulation Method

CCK/DQPSK/DBPSK/OFDM

 

 

LED Display

During communication: blinking

(Blue)

Standby: slow blinking

 

 

No operation: light off

 

 

 

 

IEEE802.11a

Center

 

5150 to 5350, 5725 to 5850 MHz

 

Frequency

 

36,40,44,48,52,56,60,64,149,153,157,161,165

 

Range/Operating

 

channels

 

channels

 

 

 

 

 

 

 

Transmission

 

OFDM method (Orthogonal Frequency Division

 

method

 

Multiplexing method)

 

 

 

 

 

Data Rates

 

54/48/36/24/18/12/9/6 (Mbps)

 

 

 

 

IEEE802.11b

Center

 

2412 to 2462 MHz

 

Frequency

 

1 to 11 channels

 

Range/Operating

 

 

 

channels

 

 

 

 

 

 

 

Transmission method

 

DS-SS method (direct dispersion spectrum dispersion

 

 

 

method)

 

 

 

 

 

Data Rates

 

11/5.5/2/1 (Mbps)

 

 

 

 

IEEE802.11g

Center

 

2412 to 2462 MHz

 

Frequency

 

1 to 11 channels

 

Range/Operating

 

 

 

channels

 

 

 

 

 

 

 

Transmission method

 

OFDM method (Orthogonal Frequency Division

 

 

 

Multiplexing method)

 

 

 

 

 

Data Rates

 

54/48/36/24/18/12/9/6 (Mbps)

 

 

 

Interface

USB 2.0 (connected to USB wireless LAN port on the projector)

 

 

 

Dimensions

Width:1.1"/28 mm

 

 

Height:0.43"/11 mm

 

 

Length:3.03"/77 mm

 

 

 

 

Weight

0.042 lbs/19 g

 

 

 

Environmental

Operational Temperatures :

Considerations

41° to 104°F / 5° to 40°C, 20% to 80% humidity (non-condensing)

 

Storage Temperatures :

 

 

14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

 

 

 

 

6

Specifications

For other countries except United States, Canada and Mexico

Product Name

NP01LM2

 

 

 

Operating Voltage

5V (power supplied from the projector)

 

 

 

Max Amps

Tx: 472 mA (Max)

 

 

Rx: 300 mA (Max)

 

 

 

Wireless Standard

IEEE802.11a, IEEE802.11b, IEEE802.11g

 

 

Modulation Method

CCK/DQPSK/DBPSK/OFDM

 

 

LED Display

During communication: blinking

(Blue)

Standby: slow blinking

 

 

No operation: light off

 

 

 

 

IEEE802.11a

Center

 

5150 to 5250, 5250 to 5350, 5470 to 5725 MHz

 

Frequency

 

36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,

 

Range/Operating

 

120, 124, 128, 132, 136, 140 channels

 

channels

 

 

 

 

 

 

 

Transmission

 

OFDM method (Orthogonal Frequency Division

 

method

 

Multiplexing method)

 

 

 

 

 

Data Rates

 

54/48/36/24/18/12/9/6 (Mbps)

 

 

 

 

IEEE802.11b

Center

 

2412 to 2472 MHz

 

Frequency

 

1 to 13 channels

 

Range/Operating

 

 

 

channels

 

 

 

 

 

 

 

Transmission

 

DS-SS method (direct dispersion spectrum dispersion

 

method

 

method)

 

 

 

 

 

Data Rates

 

11/5.5/2/1 (Mbps)

 

 

 

 

IEEE802.11g

Center

 

2412 to 2472 MHz

 

Frequency

 

1 to 13 channels

 

Range/Operating

 

 

 

channels

 

 

 

 

 

 

 

Transmission

 

OFDM method (Orthogonal Frequency Division

 

method

 

Multiplexing method)

 

 

 

 

 

Data Rates

 

54/48/36/24/18/12/9/6 (Mbps)

 

 

 

Interface

USB 2.0 (connected to USB wireless LAN port on the projector)

 

 

 

Dimensions

Width:1.1"/28 mm

 

 

Height:0.43"/11 mm

 

 

Length:3.03"/77 mm

 

 

 

 

Weight

0.042 lbs/19 g

 

 

 

Environmental

Operational Temperatures :

Considerations

41° to 104°F / 5° to 40°C, 20% to 80% humidity (non-condensing)

 

Storage Temperatures :

 

 

14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

 

 

 

 

7

Contents

Contents

Introduction ................................................................................

Inside cover

Important Information ...................................................................................

 

3

Specifications .................................................................................................

 

6

Contents .........................................................................................................

 

8

1.

What You Can Do with User Supportware 5 ...........................................

 

9

 

1-1. Image Express Utility 2.0 ......................................................................................

 

9

 

1-2. Desktop Control Utility 1.0 ..................................................................................

 

11

 

1-3. Ulead Photo Explorer 8.0 SE Basic ....................................................................

 

12

 

1-4. Viewer PPT Converter 3.0 ..................................................................................

 

13

 

1-5. PC Control Utility 3.0 ..........................................................................................

 

13

2.

Operating Environment ..........................................................................

 

14

 

2-1.

Supported Projector ............................................................................................

 

14

 

2-2. Supported the wireless LAN security type .........................................................

 

14

 

2-3.

Operating Environment .......................................................................................

 

15

3.

Connecting LAN Cable ...........................................................................

 

16

4.

Setting the LAN Setting of Projector ....................................................

 

17

 

4-1. Displaying On-Screen Menu (NETWORK SETTINGS) .....................................

 

17

 

4-2.

Wireless LAN ......................................................................................................

 

19

 

4-3.

Wired LAN ...........................................................................................................

 

28

5.

Setting the LAN Setting of Personal Computer

 

 

 

([Example] Wireless LAN of Windows Vista: Ad Hoc connection) ....

30

6.

Setting the LAN Setting of Personal Computer

 

 

 

([Example] Wireless LAN of Windows XP: Ad Hoc connection) ........

34

7.

Refer to “User’s Guide” and Help .........................................................

 

39

 

7-1. Displaying “User’s Guide” (PDF) ........................................................................

 

39

 

7-2.

Using Help ...........................................................................................................

 

41

8

1.What You Can Do with User Supportware 5

1.What You Can Do with User Supportware 5

1-1. Image Express Utility 2.0

Image Express Utility 2.0 is a software tool used to send the screen of your personal computer to the projector via a network, without the signal cables.

High-speed, high-quality image transmissions based on NEC’s original compression algorithm

NEC’s original compression algorithm allows high-quality images to be sent over the network at high speed, from your personal computer to the projector.

Simultaneous projection by multiple projectors

Images can be sent from a personal computer to not only one projector but also to two or more projectors at the same time.

1

5 Supportware User with Do Can You What

“Easy Connection” function for connecting wireless LAN

By using “Easy Connection” function*1, the complicated setting of wireless LAN can be simplified.

*1 This function can be used when Windows XP is used as the OS and when you have a “Computer Administrator” privilege. If the OS is Windows Vista, input of logon password as “Administrator” may be prompted.

The “Easy Connection” function cannot be used with Windows 2000.

9

NEC NP3150, NP1150, NP2150 User Manual

1. What You Can Do with User Supportware 5

Projected images can be transferred and saved to personal computers.

When “Meeting Mode” is used, projected images can be sent to the personal computers of all the participants (attendants) of a “Meeting”. The received images can be saved to your personal computer with a memo (text data) attached.

Attendant

Attendant

Presenter

Attendant

1-click switching of presenter

When switching to another presenter during the conference, the participants (attendants) can simply click a button to switch over to the new presenter.

Central management of the projecting personal computer

Using the Training Mode allows you to use a single personal computer (Manager) to manage which personal computer (Attendant) projects. Possible operation includes switching projecting personal computers to project from, as well as temporarily terminating communication with the projector.

 

Mr. D, please start

 

your presentation.

Manager

Attendant A

Attendant D (presenter)

Attendant B

Attendant C

Note

The Training Mode is not installed via the “Typical” installation option when Image Express

Utility 2.0 is installed.

To use Training Mode, select “Extension” installation option on the install selection screen that is displayed while Image Express Utility 2.0 installation is in progress, and select “Training

(Attendant)” or “Training (Manager)”.

10

1. What You Can Do with User Supportware 5

1-2. Desktop Control Utility 1.0

Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer at a remote location from the projector by using a network.

A commercially available USB mouse is connected to the projector to operate the personal computer.

Suppose, for example, a PowerPoint file to be presented in a conference is saved to a

personal computer in your office. If this personal computer is connected to the projector in the conference room with LAN when the conference is held, the desktop screen of the personal computer in your office (Windows Vista/Windows XP/Windows 2000) can be projected and the PowerPoint file can be presented by operating the projector. In other words the personal computer does not need to be brought into the conference room.

Conference room

Office

Important

You can use the Desktop Control Utility 1.0 to operate a personal computer located in a separate room from the projector over a network. Therefore, care must be exercised to prevent any third party from viewing the screen of your personal computer (important documents), copying files, or turning off the power.

NEC assumes no liability for any loss or damages arising from information leak or system failure while you are using Desktop Control Utility 1.0.

In the Windows operating system, select [Control Panel] → [Hardware and Sound] →

[Power Options]. Set [Change when the computer sleeps] to [Never]. (in the case of

Windows Vista) This will disconnect LAN connection when the personal computer goes in the standby mode while the Desktop Control Utility 1.0 is being used.

The screen saver function is off while Desktop Control Utility 1.0 is running.

1

5 Supportware User with Do Can You What

11

1. What You Can Do with User Supportware 5

1-3. Ulead Photo Explorer 8.0 SE Basic

Ulead Photo Explorer 8.0 SE Basic (hereafter referred to as “Ulead Photo Explorer 8.0”) is a multimedia image file management tool developed by Ulead Systems, Inc. This tool has functions to capture images from a digital camera or scanner and to process or edit images, as well as image file management functions. In addition, slideshows and screen savers can also be easily created.

Ulead Photo Explorer 8.0 in the User Supportware 5 CD-ROM has functions that allow you to use the projector more conveniently, in addition to the functions that come with the software, for when an NEC projector is connected.

Additional functions are listed below.

For details of each function, refer to the help function of Ulead Photo Explorer 8.0.

Send Image

Sends images to the projector.

Converting PowerPoint file

Converts a PowerPoint file into an image file.

Send Logo

Registers an image file as the logo data of the projector.

Capture

Saves the screens of the personal computer as image files.

Start Slide Show

Sends the image of a slideshow to the projector and executes the slideshow on the projector.

Viewer Output

Converts a slideshow into an index file that can be played back by the viewer function of the projector and outputs the index file.

Connection Selection

Select the projector to connect.

The personal computer and projector may be connected with wired LAN or wireless LAN.

12

1. What You Can Do with User Supportware 5

1-4. Viewer PPT Converter 3.0

Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/ 2000/ 2002/2003/2007 into an index file that can be displayed with the viewer function of the projector.

When converting, specify a USB memory device as the destination to which the index file is to be saved. Then you can easily make your presentation by simply inserting the USB memory device into the projector (viewer function of the projector).

If PowerPoint 2000/2002/2003/2007 is installed in your personal computer, you can activate Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registered to PowerPoint).

1-5. PC Control Utility 3.0

PC Control Utility 3.0 is software that allows you to operate the projector from the personal computer when the personal computer and the projector are connected with LAN (wired or wireless) or a serial cable.

You can operate the projector as follows from your personal computer.

For details of each function, refer to the help function of PC Control Utility 3.0.

Power on/off

Input signal switching

Muting (temporarily disabling audio/video)

Freezing (locking the projected image)

Logo image transmission

1

5 Supportware User with Do Can You What

13

2.Operating Environment

2.Operating Environment

2-1. Supported Projector

User Supportware 5 supports the following NEC projector (as of August 2007)

 

NP Series

NP3150/NP2150/NP1150

 

 

 

 

 

 

 

 

 

Reference Some of software can be used with projectors other than the above projectors. For details, refer to the help function of each software.

2-2. Supported the wireless LAN security type

The projector supports the wireless LAN security called WPA-PSK or WPA2-PSK (encryption type:TKIP/AES) as well as WEP. WPA-PSK or WPA2-PSK (TKIP/AES) provides stronger security than WEP where encryption keys are automatically changed, also providing simple authentication.

The projector’s WPA-PSK/WPA2-PSK supports the TKIP or AES encryption type.

WPA-PSK/WPA2-PSK is available only when “INFRASTRUCTURE” is selected in “NETWORK TYPE” of the “CONNECTION” page.

14

Loading...
+ 30 hidden pages