Size:
6.44 Mb
Download

Menu Options and Settings

The following sections provide BIOS Setup menu screens, menu options, and descriptions of the settings.

Main Menu

When you start Setup, the Main menu appears first.

PhoenixBIOS Setup Utility

 

 

Main

 

Advanced

Security

System Hardware

Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item Specific Help

 

 

 

Language:

 

[En glish

(US)]

 

 

 

 

 

 

 

 

 

 

System Time:

[00:00:59]

 

 

<Tab>, <Sh ift-Tab>,or

 

 

 

System Date:

[01/01/2002]

 

 

 

 

 

<E nter> selects field.

 

 

 

F W Revision

 

 

 

 

 

 

 

 

 

 

 

 

 

P rocessor Informa tion

 

 

 

 

 

 

 

P rimary Master

[CD-ROM]

 

 

 

 

 

P rimary Slave

[ATAPI Removable]

 

 

 

 

 

System Memory:

648 KB

 

 

 

 

 

 

E xtended Memory:

2047 MB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F 9

Setup Defaults

Esc

Exit

< >

Select Menu

Enter

Select Sub-Menu

F 10

Save and E xit

Figure 4-2.Main Menu

BIOS Setup 4-13

The options you can set on the Main menu screen and their functions are shown below. For the Primary Master and the Primary Slave, the respective submenus appear when you press the Enter key after you select it.

Table 4-3.Main Menu Options

Menu

 

Option

Description

 

 

 

 

Language

 

English

Displays the language used (Only English available).

 

 

 

 

System Time

 

HH:MM:SS

Sets the time.

 

 

 

 

System Date

 

MM/DD/YYYY

Sets the date.

 

 

 

 

FW Revision

 

Generic PAL_A

Displays the revision of the micro code of the processor.

 

 

 

 

 

 

Processor Specific

Displays the revision of the micro code of the processor.

 

 

PAL_A

 

 

 

 

 

 

 

PAL_B

Displays the revision of the micro code of the processor.

 

 

 

 

 

 

FW

Displays the revision of the FW.

 

 

 

 

Processor Information

 

Type

Displays the formal name of the Processor (BSP).

 

 

 

 

 

 

Speed

Displays the operation clock of the Processor (BSP).

 

 

 

 

 

 

Cache Size

Displays the L3 cache size of the Processor (BSP).

 

 

 

 

Primary Master

 

N/A

Displays the connected IDE device.

 

 

 

 

Primary Slave

 

N/A

Displays the connected IDE device.

 

 

 

 

System Memory

 

N/A

Displays the total amount of base memory.

 

 

 

Fixed at 640 KB.

 

 

 

 

Extended Memory

 

N/A

Displays the total amount of the extended memory.

 

 

 

 

BSP: BootStrap Processor

 

 

4-14BIOS Setup

Advanced Menu

When you move the cursor over “Advanced” by using the arrow keys (< and >), the Advanced menu appears. For information on the option functions, refer to “Table 4-4Advanced Menu Options.”

PhoenixBIOS Setup Utility

Main

Advanced

Security

System Hardware

Exit

 

 

 

 

 

Item Specific Help

Advanced

Peripheral Configuration

Monitoring Configuration

Option ROM

Numlock

F1

Help

^ v Select Item

- /+

Change Values

F9 Setup Defaults

Esc

Exit

< > Select Menu

Enter

Select Sub-Menu

F10 Save and Exit

Figure 4-3.Advanced Menu

BIOS Setup 4-15

Table 4-4.Advanced Menu Options

Menu

Option

Description

Advanced

--

Specifies available options for when an error occurs

 

 

during POST.

 

 

For more information, refer to “Advanced Submenu”

 

 

 

Peripheral

--

Displays/changes the settings of built-inI/O devices.

Configuration

 

For more information, refer to “Peripheral Configuration

 

 

 

 

Submenu.”

 

 

 

Monitoring

--

Displays/changes the settings of stall monitoring at the

Configuration

 

BIOS startup and OS startup.

 

 

For more information, refer to “Monitoring Configuration

 

 

Submenu.”

 

 

 

Option ROM

--

Displays/changes the settings of Option ROM expansion

 

 

of the PCI device installed on the system.

 

 

For more information, refer to “Option ROM Submenu.”

 

 

 

Numlock

--

Displays/changes the settings of the keyboard.

 

 

For more information, refer to “Numlock Submenu.”

 

 

 

4-16BIOS Setup

Advanced Submenu

When you select “Advanced” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-5Advanced Submenu Options.”

PhoenixBIOS Setup Utility

Advanced

 

 

 

 

Advanced

 

 

 

 

Item Specific Help

 

 

 

 

 

 

[Enabled]

 

 

 

 

 

 

 

P OST Error Pause

 

 

 

 

 

Select the opera tin g

 

 

 

 

 

 

 

 

 

 

 

system in stalled

 

 

 

 

 

 

 

 

 

 

 

on your system which

 

 

 

 

 

 

 

 

 

 

 

you will use most

 

 

 

 

 

 

 

 

 

 

 

commonly.

 

 

 

 

 

 

 

 

 

 

 

 

Note: An in correct

 

 

 

 

 

 

 

 

 

 

 

settin g can cause

 

 

 

 

 

 

 

 

 

 

 

some operating

 

 

 

 

 

 

 

 

 

 

 

systems to display

 

 

 

 

 

 

 

 

 

 

 

unexpected beh avior.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F 9

Setup Defaults

 

 

 

Esc

Exit

< >

Select Menu

Enter

Select Sub-Menu

F 10

Save and E xit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 4-4.Advanced Submenu

 

 

 

 

 

 

Table 4-5.Advanced Submenu Options

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu

 

Option

 

Description

 

 

 

 

POST Error Pause

Disabled

 

If a non-fatalerror occurs during POST (POST will

 

 

 

 

 

[Enabled]

 

continue), specifies whether the boot process will

 

 

 

 

 

 

pause once POST is completed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[

]: Default setting

 

 

 

 

 

 

 

 

 

 

Handling the undetected VGA:

If VGA cannot be detected and serial console redirection is enabled, messages will be displayed on the serial console instead of the display connected with the VGA, and the boot process will continue. If the serial console redirection function is disabled, the following takes place and the boot process continues:

!Error code is displayed on the LCD (Code:9009).

!A BIOS event log of the error code above is collected.

“9009 Console Device was not found.”

BIOS Setup 4-17

Peripheral Configuration Submenu

When you select “Peripheral Configuration” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-6Peripheral Configuration Submenu.”

 

 

 

 

PhoenixBIOS Setup

Utility

 

 

 

 

 

 

 

 

 

 

 

Advanced

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Peripheral Configura tion

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

System Serial Port :

 

[2F 8, IRQ3]

 

If en abled, th e console

 

 

Seria l port 1:

 

[3F 8, IRQ4]

 

will be redirected to

 

 

 

 

 

 

 

this port.

 

 

P S/2 Mouse

 

[Au to Detect]

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F 9

Setup Defaults

Esc

Exit

< >

Select Menu

Enter

Select Sub-Menu

F 10

Save and E xit

Figure 4-5.Peripheral Configuration Submenu

4-18BIOS Setup

Table 4-6.Peripheral Configuration Submenu

Menu

 

Option

Description

System Serial Port

Disabled

Disables the system serial port, or specifies the I/O

 

 

[2F8,IRQ3]

address and interrupt line.

 

 

 

 

 

FEB08000,IRQ3

 

 

 

Auto

 

 

 

 

Serial port 1

Disabled

Disables the serial port 1, or specifies the I/O address

 

 

[3F8,IRQ4]

and interrupt line.

 

 

 

 

 

3E8,IRQ4

 

 

 

2E8,IRQ4

 

 

 

3F8,IRQ6

 

 

 

3E8,IRQ6

 

 

 

2E8,IRQ6

 

 

 

Auto

 

 

 

 

PS/2 Mouse

Disable

Enables/disables the PS/2 mouse.

 

 

Enable

Automatically becomes enabled if Auto Detect is

 

 

[Auto Detect]

selected and the PS/2 mouse is connected.

 

 

 

 

 

 

 

[

]: Default setting

 

 

BIOS Setup 4-19

Monitoring Configuration Submenu

When you select “Monitoring Configuration” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-7Monitoring Configuration Submenu.”

 

 

 

 

 

PhoenixBIOS Setup

Utility

 

 

 

 

 

 

 

 

 

 

 

Main

 

Advanced

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Monitoring Configuration

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

POST Monitoring Observation:

[w/o OptROM]

 

Selects the point at

 

 

Boot Monitoring:

 

 

[Disabled]

 

which the POST

 

 

 

 

 

monitoring checkpoint

 

 

Boot Monitoring Timeout Period:

[15]

 

 

 

 

is.

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v Select Item

- /+

Change Values

F9 Setup Defaults

Esc

Exit

< > Select Menu

Enter

Select Sub-Menu

F10 Save and Exit

Figure 4-6.Monitoring Configuration Submenu

4-20BIOS Setup

Table 4-7.Monitoring Configuration Submenu

Menu

Option

Description

POST Monitoring

[w/o OptROM]

Specifies whether to perform stall monitoring during

Observation

w/ OptROM

execution of Option ROM in stall monitoring at the BIOS

startup.

 

 

w/ OptROM: Continues stall monitoring during execution

 

 

of Option ROM.

 

 

w/o OptROM: Suspends stall monitoring during

 

 

execution of Option ROM.

 

 

 

Boot Monitoring

[Disabled]

Specifies whether to perform stall monitoring when EFI

 

Enabled

AP (e.g. OS) is started from the EFI Boot Manager.

 

If you use this function, install ESMPRO because stall

 

 

 

 

monitoring should be stopped after the OS starts up.

 

 

Do not use this function if ESMPRO is not installed.

 

 

 

Boot Monitoring

1 ~ [15] ~ 60

Specifies the stall monitoring period (in minutes) at OS

Timeout Period

 

startup.

 

This value is effective only if Boot Monitoring is Enabled.

 

 

 

 

 

[ ]: Default setting

 

 

BIOS Setup 4-21

Option ROM Submenu

When you select “Option ROM” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-8Option ROM Submenu.”

PhoenixBIOS Setup Utility

Main Advanced

 

 

Option ROM

Item Specific Help

 

 

 

 

 

Host Bus Bridge#0

0

(0/0/0/0)

[00/000/81C]

Disables/enables the

Host Bus Bridge#1

1

(0/0/0/1)

[00/000/81C]

mapping of Option ROM

 

 

 

 

BIOS from the PCI bus.

 

 

 

 

 

F1

Help

^ v Select Item

- /+

Change Values

F9 Setup Defaults

Esc

Exit

< > Select Menu

Enter

Select Sub-Menu

F10 Save and Exit

Figure 4-7.Option ROM Submenu

4-22BIOS Setup

Table 4-8.Option ROM Submenu

Menu

Option

Description

Host Bus Bridge#M

--

Specifies whether to operate Option ROM expansion of

N (W/X/Y/Z)

 

the PCI device installed under the extended PCI bus.

 

 

(aa/bbb/ccc)

 

Host Bus Bridge#M N (W/X/Y/Z) (aa/bbb/ccc)

 

 

M: HBB number (0-63)

 

 

N: PCI/PCI-Xbus number(0-231)

 

 

W: Cell Board number (0-7)

 

 

X: IOC number (0-1)

 

 

Y: GSL number (0-1)

 

 

Z: PCI bus number (0-1)

 

 

(aa/bbb/ccc): Location information

 

 

aa: Cabinet Number

 

 

bbb: Rack-MountableUnit Information

 

 

ccc: Unit/Module Number

 

 

For more information, refer to “Extended PCI Slot

 

 

Submenu.”

 

 

Note: Also see Table 5-2,“PCI Slot Addressing in the

 

 

Core Module” and Table 5-4,“PCI Slot Addressing in the

 

 

PCIX Unit” in Chapter 5.

 

 

 

BIOS Setup 4-23

Extended PCI Slot Submenu

When you select “Extended PCI Slot (Host Bus Bridge#N)” on the Option ROM submenu under the Advanced menu, the following screen appears.

For more information on the option functions, refer to “Table 4-9Extended PCI Slot Submenu.”

PhoenixBIOS Setup Utility

 

Main

Advanced

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Host Bus Bridge#0

0 (0/0/0/0)

[00/000/81C]

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

PCI Slot #1:

 

 

 

 

Initializes device

 

 

 

Option ROM Sca n:

[Enabled]

 

 

expansion ROM.

 

 

PCI Slot #2:

 

 

 

 

 

 

 

 

 

 

Option ROM Sca n:

[Enabled]

 

 

 

 

 

 

 

PCI Slot #3:

 

 

 

 

 

 

 

 

 

 

Option ROM Sca n:

Enabled

 

 

 

 

 

 

 

 

 

 

This slot can not be turn ed

 

 

 

 

 

 

 

 

 

on “disabled” because the

 

 

 

 

 

 

 

 

 

video card is installed on it.

 

 

 

 

 

PCI Slot #4:

 

 

 

 

 

 

 

 

 

 

Option ROM Sca n:

[Enabled]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F 9

Setup Defaults

 

 

Esc

Exit

< >

Select Menu

Enter

Select Sub-Menu

F 10

Save and E xit

 

Figure 4-8.Extended PCI Slot Submenu

4-24BIOS Setup

Table 4-9.Extended PCI Slot Submenu

Menu

Option

Description

PCI Slot#1

Disabled

Specifies whether to expand Option ROM expansion of

Option ROM Scan

[Legacy Enabled]

the PCI device installed in PCI Slot#1-4on the specified

PCI bus.

 

EFI(EBC) Enabled

PCI Slot#2

Disabled: No Option ROM expansion

EFI(IPF) Enabled

Option ROM Scan

Legacy Enabled: Option ROM expansion exists

 

 

 

(Boots IA32 Oprom.)

PCI Slot#3

For default values,

 

Option ROM Scan

EFI (EBC) Enabled: Option ROM expansion exists.

refer to the

 

(Boots EBC EFI driver.)

 

description below.

PCI Slot#4

 

 

Option ROM Scan

 

EFI (IPF) Enabled: Option ROM expansion exists.

 

 

(Boots IPF EFI driver.)

 

 

 

Default value of an Option ROM Scan of the extended PCI slot:

Depending on number of the Option ROM expansion installed on devices, a system startup time delay may occur due to an Option ROM Scan.

If this happens, restrict the slots with the Option ROM of the PCI card enabled as the boot device, and set the default value of the Option ROM Scan of the slot to “Legacy Enabled.” For the remaining slots, set the default value to “Disabled.”

The default values of Option ROM Scan of the extended PCI slot are shown below.

Table 4-10.Default Values of Extended PCI Slot Option ROM Scan

Target Slot

Default Value

Remarks

 

 

 

All slots under the GSL with the lowest number of

Legacy

PCI bus #0 and PCI bus #1 *

the master IOC (All slots under GSL#0a and

Enabled

 

GSL#0b)

 

 

 

 

 

Slots except above

Disabled

PCI bus #2 and PCI bus with

 

 

larger number

 

 

 

*When a card with PCI-to-PCIBridge is configured on GSL#0a and GSL#0b, the BIOS assigns a bus number to PCI bus under thePCI-to-PCIbridge. And this remark is not applicable.

Example:

When a PCI-to-PCIBridge is configured on the slot under GSL#0b, PCI Bus #0 is assigned to GSL#0a. And PCI Bus #1 and PCI Bus#2 are assigned to PCI bus under GSL#0b. In this case, PCI Bus #3 and larger bus number is assigned to PCI bus under GSL with non lowest number. If aPCI-to-PCIBridge is configured on PCI Bus #0, this example is not applicable.

BIOS Setup 4-25

Procedure when a video card is installed:

If you disable the Option ROM of the slot where a video card is installed, the VGA console becomes unavailable. In this case, the BIOS proceeds as follows:

In BIOS Setup, “Legacy Enabled” is displayed for the slot where the video card is installed, and “Disabled” cannot be selected.

Under the menu of the slot, the following message is displayed.

Displayed message:

This slot cannot be turned on "disabled" because the video card is installed on it.

4-26BIOS Setup

Numlock Submenu

When you select “Numlock” on the Advanced menu, the following screen appears. For more information on the option functions, refer to “Table 4-11Numlock Submenu.”

 

 

 

 

PhoenixBIOS Setup

Utility

 

 

 

 

 

 

 

 

 

 

Main

Advanced

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Numlock

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selects Power-onsta te

 

 

NumLock:

 

 

[Au to]

 

for NumLock

 

 

Key Click:

 

 

[Disabled]

 

 

 

 

Keyboard auto-repeatrate:

[30/sec]

 

 

 

 

Keyboard auto-repeatdelay:

[1/2 sec]

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F 9

Setup Defaults

Esc

Exit

< >

Select Menu

Enter

Select Sub-Menu

F 10

Save and E xit

Figure 4-9.Numlock Submenu

BIOS Setup 4-27

Table 4-11.Numlock Submenu

Menu

 

Option

Description

Numlock

[Auto]

Enables or disables Numlock at system startup. “Auto”

 

 

On

enables Numlock when any entry from the numeric

 

 

keypad is detected.

 

 

Off

 

 

 

 

Key Click

[Disabled]

Enables or disables key clicks.

 

 

Enabled

 

 

 

 

Keyboard auto-repeat

2/sec

Specifies the number of characters to be output for one

rate

 

6/sec

second of key repeat.

 

 

 

 

 

10/sec

 

 

 

13.3/sec

 

 

 

18.5/sec

 

 

 

21.8/sec

 

 

 

26.7/sec

 

 

 

[30/sec ]

 

 

 

 

Keyboard auto-repeat

1/4 sec

Specifies the time until key repeat starts.

delay

 

[1/2 sec]

 

 

 

 

 

 

3/4 sec

 

 

 

1 sec

 

 

 

 

 

[

]: Default setting

 

 

4-28BIOS Setup

Security Menu

When you move the cursor over “Security” by using the arrow keys (< and >), the Security menu appears. For more information on the option functions, refer to “Table 4-12Security Menu.”

PhoenixBIOS Setup Utility

 

Main

Advanced

Security

 

System Hardware

Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supervisor Password is

 

Clear

 

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

 

 

 

User Password is

 

Clear

 

 

Supervisor Password

 

 

 

 

 

 

 

 

 

 

 

Set Supervisor Password:

 

[Enter]

 

 

controls access to the

 

 

 

 

 

setup utility.

 

 

Set User Password:

 

[Enter]

 

 

 

 

 

 

 

 

 

 

Password On Boot:

 

[Disabled]

 

 

 

 

Option ROM Menu Mask:

 

[Unmasked]

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F9

Setup Defaults

Esc

Exit

< >

Select Menu

Enter

Select

Sub-Menu

F10

Save and Exit

Figure 4-10.Security Menu

BIOS Setup 4-29

The options you can set on the Security menu screen and their functions are shown in the following table.

 

Table 4-12.Security Menu

 

 

 

Item

Option

Description

Supervisor Password is

 

Displays whether the supervisor’s password is set.

 

 

The Password is not displayed.

 

 

 

User Password is

 

Displays whether the user’s password is set.

 

 

The Password is not displayed.

 

 

 

Set Supervisor

Up to 7

Moves to the supervisor password entry screen when

Password

alphanumeric

you press the “Enter” key. If you log in as a supervisor,

characters

you can access all the Setup menus.

 

(A-Z,a-z,0- 9)

 

 

 

 

Set User Password

Up to 7

Moves to the user password entry screen when you

 

alphanumeric

press the “Enter” key. If you log in as a user, some

 

accesses to the Setup menus are restricted.

 

characters (A-Z,a-z,

 

 

0- 9)

 

 

 

 

Password On Boot

[Disabled]

Specifies whether a password is required at boot-up.

 

Enabled

You must have specified the supervisor’s password

 

beforehand.

 

 

If the supervisor’s password has been specified and the

 

 

option “Disabled” is selected, the BIOS judges that a

 

 

user is trying to boot the system.

 

 

 

Option ROM Menu Mask

[Unmasked]

Enables or disables key entry during Option ROM BIOS

 

Masked

expansion.

 

Masked: Disables key entries.

 

 

 

 

Unmasked: Enables key entries.

 

 

 

[ ]: Default setting

 

 

4-30BIOS Setup

System Hardware Menu

When you move the cursor over “System Hardware” by using the arrow keys (< and >), the System Hardware menu appears. For more information on the option functions, refer to “Table 4-13System Hardware Menu.”

PhoenixBIOS Setup Utility

 

Main

Advanced

Security

 

System Hardware

Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item Specific Help

 

 

HBB Con figura tion

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Console Redirection

 

 

 

 

 

Select the System

 

 

Sh rin k total number of interrupt vectors

 

 

 

 

 

 

 

 

Ha rdware options.

 

 

Memory Mapped I/O > 4GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

Help

^ v

Select Item

- /+

Change Values

F 9

Setup Defaults

Esc

Exit

< >

Select Menu

Enter

Select Sub-Menu

F 10

Save and E xit

Figure 4-11.System Hardware Menu

BIOS Setup 4-31

The options you can set on the System Hardware menu and their functions are shown in the following table.

Table 4-13.System Hardware Menu

Item

Option

Description

HBB Configuration

--

Specifies Master Latency Timer, PCI Gap, and I/O space

 

 

for each host PCI bus bridge (HBB: Host Bus Bridge).

 

 

For more information, refer to “HBB Configuration

 

 

Submenu.”

 

 

 

Console Redirection

--

Displays/changes the settings of the serial console

 

 

input/output function.

 

 

For more information, refer to “Console Redirection

 

 

Submenu.”

 

 

 

Shrink total number of

--

Specifies whether to aggregate Global System Interrupt

interrupt vectors

 

Vectors to 255 or fewer than 255.

 

 

For more information, refer to “Shrink Total Number of

 

 

Interrupt Vectors Submenu.”

 

 

 

Memory Mapped

--

Specifies whether to map the Memory Mapped I/O to an

I/O > 4GB

 

area of more than 4 GB.

 

 

For more information, refer to “Memory Mapped

 

 

I/O>4GB Submenu.”

 

 

 

4-32BIOS Setup