Napoleon WF9, WF9ST Installation Manual

APPLY SERIAL NUMBER LABEL FROM CARTON

SERIAL NO.	XXXXXX000000
MODEL NO.

DECORATIVE INDOOR WATERFALLS

THAT PURIFY AND HUMIDIFY THE AIR

WF 6/9/18

WF9ST

MANUFACTURED BY / MANUFACTURE PAR: NAPOLEONAPPLIANCE CORP., 214 BAYVIEW DR., BARRIE, ONTARIO, CANADA L4N 4Y8 PHONE: [phone]

FAX: [phone] EMAIL: [e-mail] WEB SITE: www.napoleongrills.com

RETAIN THIS MANUAL FOR FUTURE REFERENCE GARDER CE LIVRE POUR RÉFÉRENCES FUTURES

N415-0128 / MAR 17/10

NAPOLEON waterfalls are manufactured under the strict Standard of the world recognized ISO 9001-2008 Quality Assurance Certificate.

NAPOLEON products are designed with superior components and materials, and are assembled by trained craftsmen who take great pride in their work. Every component is thoroughly inspected by a qualified technician before packaging and shipping to ensure that you, the customer, receive the quality product you expect from NAPOLEON.

NAPOLEON WATERFALL PRESIDENT'S WARRANTY

NAPOLEON warrants the materials and workmanship in your new NAPOLEON Waterfall against defects for a period of one year. This excludes filters, light bulbs, and UV light bulbs.

NAPOLEON shall not be liable for any transportation charges, labour costs, installation or removal costs, water damage or export duties.

CONDITIONS AND LIMITATIONS

"NAPOLEON warrants its products against manufacturing defects to the original purchaser only, provided that the purchase was made through an authorized NAPOLEON dealer and is subject to the following conditions and limitations:"

This factory warranty is non-transferable and may not be extended what-so-ever by any of our representatives.

The waterfall must be installed by a licenced, authorized service technician or contractor. Installation must be done in accordance with the installation instructions included with the product and all local and national building codes.

This limited warranty does not cover damages caused by misuse, lack of maintenance, hostile environments, accident, alterations, abuse or neglect and parts installed from other manufacturers will nullify this warranty.

This limited warranty further does not cover any scratches, dents, rust, painted finishes, abrasive and chemical cleaners, nor chipping on porcelain enamel parts, nor any components used in the installation of the waterfall.

Should deterioration of parts occur to the degree of non-performance within the duration of the warranted coverage, a replacement part will be provided.

In the first year only, this warranty extends to the replacement of warranted parts which are defective in material or workmanship provided that the product has been operated in accordance with the operation instructions and under normal conditions.

NAPOLEON will not be responsible for the installation, labour or any other costs or expenses related to the reinstallation of a warranted part, and such expenses are not covered by this warranty.

Notwithstanding any provision contained in this President's Warranty NAPOLEON's responsiblity under this warranty is defined as above and it shall not in any event extend to any incidental, consequential, or indirect damages.

This warranty defines the obligation and liability of NAPOLEON with respect to the NAPOLEON waterfall and any other warranties expressed or implied with respect to this product, its components or accessories are excluded.

NAPOLEON neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilities with respect to the sale of this product.

Any damages to the waterfall due to weather damage, hail, rough handling, damaging chemicals or cleaners will not be the responsibility of NAPOLEON.

The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from

NAPOLEON.

NAPOLEON reserves the right to have its representative inspect any product or part prior to honouring any warranty claim. NAPOLEON shall not be liable for any transportation charges, labour costs, installation or removal cost, water damage or export

duties.

2

indoor air quality

Your new NAPOLEON waterfall will dramatically improve the indoor air quality in your home. The waterfall is a natural humidifier which helps alleviate dry skin and allergies. This is extremely beneficial in dry climates and also cold climates where forced air furnaces dry the air. The waterfall also cleans the air by attracting contaminants. Moving water attracts airborne particles, such as dust, pet dander, pollen and other pollutants. The waterfall draws these particles into the water, which is then filtered through a 5 micron filter before being recirculated. The result is cleaner, fresher, humidified air. Waterfalls also generate negative ions. These odourless tasteless invisible molecules are created in nature as air molecules break apart due to sunlight, radiation, and moving air and water. Researchers now believe that negative ions aid in alleviating depression, reducing stress and boosting energy.

installationToolsandmaterialsrequired

Before you begin hooking up the fountain ensure that you have access to the following materials and tools.

Tools:

-utility knife

-adjustable wrench

-3/8” nut driver

-pliers

-flat screw driver

Materials:

-saddle valve and 1/4” tubing (ice maker plumbing kit) (required if unit is being connected to house water supply)

-teflon tape

-possible additional 1/2” i.d. tubing and 3/4” i.d. tubing depending on location of unit.

-liquid TSP (Trisodium Phosphate) or TSP Substitute cleaner

appropriate location

There are several things to consider when choosing the appropriate location to install your waterfall.

The waterfall is designed to be installed into a 2” x 4” interior wall. The waterfall should not be installed in a load bearing wall, unless it can be framed in with proper supports and headers as required by your local building codes. Check with your local building authority for specifications. Installing the waterfall in an exterior wall is not recommended, as it cannot be properly insulated. If there are no suitable alternative locations, then the waterfall can be installed in a 2” x 6” wall using rigid foam insulation between the exterior of the house and the back of the fountain. The waterfall cannot be installed in a 2” x 4” exterior wall.

The see-thru waterfall only has water running down one side of the glass, so thought should be given as to which direction the unit is mounted. The side with the manifold is the side with the water flow. The see-thru waterfall is not designed to be air tight like a window and cannot be placed on an exterior wall. If being placed between rooms where privacy may be a concern, a clouded or patterned glass can be used. Some noise will also travel between the two rooms that share the waterfall.

The lights, pump and optional UV-light require power. Make sure you choose a location that has the available power within reach of the supplied electrical cords. The receptacle must be GFI (ground fault interrupt) protected. Electrical work must be done by a qualified electrician. Check with your local building authority for specifications for your area. Do not run extension cords behind walls.

An area to locate the pump module is also required. It should be located as close to the fountain as possible and in a location that is easily accessible for servicing and maintaining the module. Although we recommended that the pump module and the waterfall be located as close as possible to each other we have specified some maximum heights which you must follow. Maximum height from floor on which pump module is sitting to top edge of waterfall frame is 12 feet. The maximum horizontal distance from drain outlet on waterfall to drain inlet on pump module is 15 feet. For every 1 foot that the pump module is located away from the fountain unit, 1 inch of drop is required from the fountain basin drain outlet to the pump module drain inlet. With longer lines there are a few other things to consider, the drain needs to have a constant slope from the waterfall outlet to the pump module inlet, if there are dips or rises the drain will gurgle. A lot more water is held in the lines, this means that there is a large difference in the level of water in the reservoir from when the unit is off, to when the unit is operating. To eliminate any potential problems such as unit overflowing or running dry, the unit must be hooked up to both a water supply and a drain.

The waterfall is designed to be connected to a water source, to automatically refill the basin as water evaporates, and to a drain, in case of accidental overflow. The unit can be operated without the water source connection, but is not recommended. The water will evaporate naturally and will require additional water to ensure proper flow and pump operation. Damage to the pump incurred by running dry is not covered by warranty. The waterfall must be hooked-up to a drain which will allow the tank to be purged for routine cleaning, and will prevent the unit from overflowing if the float valve malfunctions.

Water damage to surrounding objects in your home is not covered in your NAPOLEON warranty. The waterfall is designed to not splash, however if it is not properly installed or maintained, some splashing may occur. Protect delicate nearby surfaces that could be damaged by splashing. Do not trim with materials that can be damaged by moisture such as particle board or MDF. It is best to install the unit in stone, marble, glass, tile etc.

Although your NAPOLEON Waterfall will be beneficial to the air quality of your home, excess moisture can lead to the formation of mold and

mildew. It is recommended that all homes have some form of humidity control and air exchange system to prevent such an occurence.

3

water

Water is perhaps the most critical component in the waterfall. Dirty or contaminated water will quickly cause operational problems with your waterfall. House water must be softened and filtered if the unit is to be connected to the water supply. RO (Reverse Osmosis) water will give the best results, and require the least amount of maintenance. If the unit is not being connected to the house supply, distilled bottled water is recommended. The provided filter and optional UV-light cannot prevent hard water deposits from forming on the surfaces of your waterfall. Hard water will also cause plugged passages and manifold ports, reducing the flow effect on the waterfall surface. The life-span of the pump will also be adversely affected due to the use of hard water. Use of RO or distilled water is by far the best way of ensuring years of carefree enjoyment from your waterfall.

The provided sediment filter will help prevent clogging of the manifold ports that disperse the water down the face of the waterfall. The water that flows down the face will attract dust, debris particles and mould spores that are floating in the air in your home. This will help to naturally filter the air you breathe and keep your home cleaner. However the filter will become contaminated and the water flow will be reduced over time. We recommend that the filter be replaced whenever the waterfall is cleaned, every 3-4 months or sooner as deemed necessary by poor water flow. The filters can be purchased through your authorized NAPOLEON dealer.

An additive such as “Fountec” manufactured by McGrayel will prevent algae from growing in the reservoir or on any other waterfall surfaces. To use Fountec start with a completely clean system and add three to four drops to the water reservoir every week.

The optional ultraviolet-light will also help destroy any green algae, bacteria, mould or mildew found in the water. Flowing water is fairly resistant to this kind of growth, but in time the water will become contaminated and the system will have to be flushed and thoroughly cleaned. Not only unsightly but mould and bacteria growth will plug the manifold ports, reducing the flow of water and can damage the water pump over time. The optional UV-light will help to keep your waterfall relatively maintenance free by keeping the water cleaner for a longer period of time. The UV-bulb must be replaced every year to ensure proper operation. The UV-bulbs are available from your authorized NAPOLEON dealer.

The waterfall is designed to be connected directly to a water source. Waterfalls are natural humidifiers for the environment. The amount of water the waterfall consumes daily is dependant upon how dry the air is, and how large the waterfall surface is. There is a float valve that will open as the water level drops, allowing water to enter the system. This will ensure that the water level is kept at the height required for proper operation of the water pump. The pump should never be allowed to run dry and damage resulting from that will not be covered by warranty. If there is not a suitable water source to be had nearby, the waterfall can be installed as a stand-alone system, but the water level will have to be monitored frequently and supplemented as needed.

WATER PUMPS

The water pump supplied with your waterfall has been selected for its high flow volume, efficiency, quiet operation and reliability. The pump is suitable for pushing water to a height of 12 feet, however the flow is reduced greatly at that height. This must be kept in mind when finding a location for the pump and water basin, so the pump module must be located on the same floor as the fountain. The minimum space required for the pump module for the waterfall is 18” x 18” x 18” high. The system has a flow control valve after the filter that can be adjusted to provide the desired flow rate on the waterfall surface.

The pump must be kept submersed in water at all times while in operation. The water acts as a cooling agent for the pump, preventing the pump from overheating. Low water levels, frequently turning the pump on and off and impurities in the water from poor waterfall maintenance will shorten the life of the pump. If maintained properly, the pump will provide years of reliable service.

If you hear excessive noise coming from your pump, check first to see that you have enough water in the basin to keep the pump fully submerged below 1-2” of water. The pump should not be vibrating against the tub, but if it is, it can be isolated by placing a small piece of sponge between the pump and the basin. Be sure to not block or restrict in any way the pump’s water inlet.

ELECTRICAL REQUIREMENTS

The waterfall will require 2 separate 110 volt electrical receptacles, one for the lights and one for the water pump. GFI receptacles must be used, because of the use of water and possibility of contact.

It is not required that the receptacles be wired on their own circuit, as the pump, lights and optional UV-light draw very little current. If there is already a heavy load elsewhere on that circuit or you have trouble with breakers tripping, a separate circuit will need to be installed. Any circuit wiring or GFI installation must be done by a qualified electrician. If you would like to be able to turn the fountain on and off, the receptacles should be wired to a wall switch. Two wall switched receptacles are recommended, one for the pump and UV-light (optional) and one for the lights. This will allow you to turn the lights on and off

4 endently of the fountain.

INSTALLATION

The framing dimensions are included in the framing specifications drawing. The unit is designed to be installed after drywalling. For added protection water resistant drywall (green board) or cement board are recommended in the vicinity of the fountain. The fountain is designed to be attached to the studs over the drywall along both vertical sides of the fountain using drywall screws. This will leave a basically flush surface to trim over. Leak test the waterfall before fully enclosing. All trim used on the fountain should be made of real wood (not MDF), or any other material that is not damaged by moisture, with several coats of a water proof coating (paint or urethane) depending on the desired look. The bottom piece of trim can only be nailed at the ends, because it is mounted in front of the stainless basin. It should be siliconed to the stainless basin for additional support.

After installing the fountain, connect the piping as shown in the piping diagrams. The tubing to connect the unit overflow to the house drain is not supplied. If the unit is being connected to the water supply, use an ice maker plumbing kit (not supplied) to connect the water supply to the float valve. When the unit is operational, adjust the float valve so that it turns the water off when the top of the pump is submerged below 1-2” of water. Ensure that the wing nut on the side of the float valve is properly tightened. Connect the light wire to the terminals on the transformer.

WATERFALL SURFACE MATERIALS

The waterfall models WF6, WF9, and WF18 are supplied with a stainless steel panel for the water to flow over. The surface of the stainless steel must be cleaned to remove any grease or oily materials left behind from the manufacturing process. The protective coating will also leave a residue behind. Any residue left on the surface, or oily residue from your hands, will repel the water and prevent a sheet of water from forming over the panel. This will give you thin streams of water with large dry spots in between. Cleaning the panel with liquid TSP (or TSP Substitute) will remove any residue or film that is impeding the progress of the water. Clean the panel thoroughly two or three times before the first use.

The See-Thru waterfall model is not supplied with any surface panel. The glass panel can be ordered from any glass and window dealer in your local area. There is no specific type of recommended glass, but the glass should be minimum 1/4” (6mm) thick. Clear glass displays the water flow pattern the best, but if privacy between the adjoining rooms is desired some type of smoked or opaqued glass will work as well.

Before starting the waterfall, the entire panel surface should be wet down, either by spray bottle, or wet cloth. This will help the water to spread evenly across the panel. The wave effect of water flowing down the panel, will be attained after the panel is covered in water. The wave pattern can be adjusted by increasing or restricting the flow of water with the valve at the side of the filter. Adjust the valve to achieve the effect that is most pleasing to your eye. It is important to remember that too little water flow can cause dry spots to reappear on the surface of the waterfall. You can increase the flow of water slightly until they disappear. Lightly rubbing a wet cloth or Scotchbrite pad (careful not to scratch the stainless steel surface), across the panel may be enough to remove any dry spots.

TO FOUNTAIN	TO FOUNTAIN
FROM BASIN	FROM BASIN

TO DRAIN TO DRAIN

VALVE	VALVE
FULL OPEN	PARTIAL OPEN

GROOVED LUXIDIO PANEL: An optional grooved LUXIDIO panel which enhances the ripple effect can be purchased at your
authorized NAPOLEON dealer. This panel must be cleaned with liquid TSP (or TSP Substitute) before being placed in the
unit, to prevent dust and debris from the manufacturing process from entering the water. Use caution when cleaning the
grooves on the panel as the machined edges can be very sharp. The stainless steel panel must be removed before
installing the LUXIDIO panel. Turn off the water before switching the panels. To remove the stainless steel panel, slide it
upwards slightly, then swing the bottom of the panel towards you, clearing the panel retaining brackets. Slide the panel
downwards and out of the fountain. Install the LUXIDIO panel in the reverse order. The LUXIDIO panel will require more water
to achieve the same wave effect as the stainless panel, as the grooves will fill and retain water. Again any dry spots can be	5
removed by rubbing horizontally with a Scotchbrite pad.