NAIS HA1E-DC6V, HA1E-DC5V, HA1E-DC24V, HA1E-DC12V, HA1E-AC6V Datasheet

COST SAVING

SUBMINIATURE HA-RELAYS

PC BOARD RELAYS

	14.0
	.551	26.5	14.2
	26.3		.559
		1.043
	1.035

16.9

.665 17.7

.697

FEATURES

•Compact construction

•Sensitive - very low operating power

•Soldering flux inflow prevented by molded construction

•Contact capacity - 3 A 250 V AC, 30 V DC

•Simple mechanism for stable quality - only 9 pieceparts

•Amber sealed types available

HAE Amber Relays

mm inch

SPECIFICATIONS

HA1 Standard type

Contacts

	Arrangement					1 Form C
	Contact material					Silver-nickel
	Initial contact resistance, max.					50 mΩ
	(By voltage drop 6 V DC 1 A)
	Rating		Max. switching power			750 VA, 90 W
	(resistive		Max. switching voltage			250 V AC, 30 V DC
	load)
			Max. switching current			3 A
	Expected		Mechanical			107
	life (min.		Electrical		3 A 250 V AC	105
	operations)		(resistive)		3 A 30 V DC	5×105

Coil

Minimum operating power	(AC) 0.58 VA, (DC) 230 mW
Nominal operating power	(AC) 0.9 VA, (DC) 360 mW

Characteristics

	Maximum operating speed				20 cpm
	Initial insulation resistance*1				Min. 100 MΩ at 500 V DC
	(at 25°C, 50% R.H.)
	Initial	Between open contacts			750 Vrms for 1 min.
	breakdown
		Between contacts and coil			1,500 Vrms for 1 min.
	voltage*2
	Operate time*3 (at nominal voltage)				Approx. 6 ms (AC),
	(at 20°C)				Approx. 5 ms (DC)
	Release time (without diode)*3				Approx. 6 ms (AC),
	(at nominal voltage)(at 20°C)				Approx. 3 ms (DC)
	Temperature rise (at 20°C)				Max. (AC) 60°C, (DC) 40°C
					with nominal coil voltage and
					at 3A switching current
	Shock resistance			Functional	98 m/s2 {10G}
				Destructive	980 m/s2 {100G}
				Functional	10 to 55Hz
					at double amplitude of 1mm
	Vibration resistance
				Destructive	10 to 55Hz
					at switching of 2mm
	Conditions for operation,			Ambient	–40°C to +50°C
	transport and storage*4			temp.	–40°F to +122°F
	(Not freezing and con-
	densing at low tempera-			Humidity	5 to 85%R.H.
	ture)
	Unit weight				Approx. 15 g .53 oz

Remarks

* Specifications will vary with foreign standards certification ratings.

*1 Measurement at same location as "Intial breakdown voltage" section *2 Detection current: 10 mA

HA1E Amber sealed type

Contacts

	Arrangement					1 Form C
	Contact material					Gold-clad over silver-nickel
	Initial contact resistance, max.					50 mΩ
	(By voltage drop 6 V DC 1 A)
	Rating		Max. switching power			500 VA, 90 W
	(resistive		Max. switching voltage			250 V AC, 30 V DC
	load)
			Max. switching current			2 A AC, 3A DC
	Expected		Mechanical			107
	life (min.		Electrical		2 A 250 V AC	105
	operations)		(resistive)		3 A 30 V DC	2×105

Coil

Minimum operating power	(AC) 0.58 VA, (DC) 230 mW
Nominal operating power	(AC) 0.9 VA, (DC) 360 mW

Characteristics

	Maximum operating speed				20 cpm
	Initial insulation resistance*1				Min. 100 MΩ at 500 V DC
	(at 25°C, 50% R.H.)
	Initial	Between open contacts			750 Vrms for 1 min.
	breakdown
		Between contacts and coil			1,500 Vrms for 1 min.
	voltage*2
	Operate time*3 (at nominal voltage)				Approx. 6 ms (AC),
	(at 20°C)				Approx. 5 ms (DC)
	Release time (without diode)*3				Approx. 6 ms (AC),
	(at nominal voltage)(at 20°C)				Approx. 3 ms (DC)
	Temperature rise (at 50°C)				Max. (AC) 60°C, (DC) 40°C
					with nominal coil voltage and
					at 3A switching current
	Shock resistance			Functional	98 m/s2 {10G}
				Destructive	980 m/s2 {100G}
				Functional	10 to 55Hz
					at double amplitude of 1mm
	Vibration resistance
				Destructive	10 to 55Hz
					at double amplitude of 2mm
	Conditions for operation,			Ambient	–40°C to +50°C
	transport and storage*4			temp.	–40°F to +122°F
	(Not freezing and con-
	densing at low tempera-			Humidity	5 to 85%R.H.
	ture)
	Unit weight				Approx. 15 g.53 oz

*3 Excluding contact bounce time

*4 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61).

208