MXIC MX23C6410PC-15, MX23C6410PC-12, MX23C6410PC-10 Datasheet

MX23C6410

FEATURES

•Bit organization

-4M x 16 (word mode)

•Fast access time

-Random access: 100ns (max.)

•Current

-Operating: 70mA

•Supply voltage

-5V±10%

•Package

-42 pin PDIP (600mil)

PIN CONFIGURATION

42 PDIP (Word mode only & without CE pin)

A18		1		42	A19
A17		2		41	A8
	A7	3		40	A9
	A6	4		39	A10
	A5	5		38	A11
	A4	6		37	A12
	A3	7		36	A13
	A2	8	MX23C6410	35	A14
	A1	9		34	A15
	A0	10		33	A16
A21		11		32	A20
VSS		12		31	VSS
					D15
	OE	13		30
	D0	14		29	D7
	D8	15		28	D14
	D1	16		27	D6
	D9	17		26	D13
	D2	18		25	D5
D10		19		24	D12
	D3	20		23	D4
D11		21		22	VCC

BLOCK DIAGRAM

5V 64M-BIT Mask ROM

PDIP Package Only

ORDER INFORMATION

Part No.	AccessTime	Package
MX23C6410PC-10	100ns	42 pin PDIP
MX23C6410PC-12	120ns	42 pin PDIP
MX23C6410PC-15	150ns	42 pin PDIP

PIN DESCRIPTION

	Symbol		Pin Function
	A0~A21		Address Inputs
	D0~D15		Data Outputs
	OE		Output Enable Input
	VCC		Power Supply Pin
	VSS		Ground Pin
	NC		No Connection

MODE SELECTION

OE D15/A-1		D0~D7	D8~D15	Mode	Power
H	X	High Z	High Z	-	Active
L	Output	D0~D7	D8~D15	Word	Active

A0 - A21

Address

Memory

Page

Output

D0 - D15

Buffer

Array

Buffer

Buffer

OE

P/N:PM0828

REV. 1.1, JUL. 27, 2001

1

MX23C6410

ABSOLUTE MAXIMUM RATINGS

Item	Symbol	Ratings
Voltage on any Pin Relative to VSS	VIN	-0.8V to VCC+2.0V (Note)
Ambient Operating Temperature	Topr	0°C to 70°C
Storage Temperature	Tstg	-65°C to 125°C

Note: Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to -0.8V for periods of up to 20ns. Maximum DC voltage on input or I/O pins is VCC+0.5V. During voltage transitions, input may overshoot VCC to VCC+2.0V for periods of up to 20ns.

DC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 5V±10%)

Item	Symbol	MIN.	MAX.	Conditions
Output High Voltage	VOH	2.4V	-	IOH = -1.0mA
Output Low Voltage	VOL	-	0.4V	IOL = 2.1mA
Input High Voltage	VIH	2.2V	VCC+0.3V
Input Low Voltage	VIL	-0.3V	0.8V
Input Leakage Current	ILI	-	5uA	0V, VCC
Output Leakage Current	ILO	-	5uA	0V, VCC
Operating Current	ICC1	-	70mA	f=5MHz, all output open
Input Capacitance	CIN	-	10pF	Ta = 25°C, f = 1MHZ
Output Capacitance	COUT	-	10pF	Ta = 25°C, f = 1MHZ

AC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 5V±10%)

Item	Symbol	23C6410-10			23C6410-12			23C6410-15
		MIN.	MAX.		MIN.	MAX.		MIN.	MAX.
Read Cycle Time	tRC	100ns	-		120ns	-		150ns	-
Address Access Time	tAA	-	100ns		-	120ns	-		150ns
Output Enable Time	tOE	-	50ns		-	60ns	-		70ns
Output Hold After Address	tOH	0ns	-		0ns	-		0ns	-
Output High Z Delay	tHZ	-	20ns		-	20ns	-		20ns

Note:Output high-impedance delay (tHZ) is measured from OE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested.

P/N:PM0828

REV. 1.1, JUL. 27, 2001

2