Page 1
DUAL MODE DIGITAL CAMERA
Page 2
-Driver Installation............................................................................9.
-Install ArcSoft PhotoImpression 4.0
-Install ArcSoft PhotoBase
3.0..........................................................
.................................................
................................................................
........................................................
-Install ArcSoft VideoImpression
1.6
-Install
-
-
QuickTime
Transferring pictures and video to your computer..............................14.
Player
Downloading photo via "PhotoImpression 4.0"..................................15.
6
13.
1121..
10.
Package Contents............................................................. 2.
Powering Up...................................................................... 6.
Taking & Playback Pictures on the Camera..........................7.
Taking & Playback Videos on the Camera............................8.
Driver and Software Installation.........................................9.
Transferring Images ...........................................................14.
Video Playback Using VideoImpression 1.6.......................17.
Photo and Sharing Management Using PhotoBase 3.0........16.
Specifications...................................................................20.
Table of Contents
Welcome............................................................................1.
Uninstall Application
Programs.........................................19.
-Package Contents.......................................................................... 2.
-System Requirements......................................... .. .. .. .. .. .. .. .. .. .. .. .. .. . 3.
-Identifying The Parts...................................................................... 4.
-Camera Settings............................. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 5.
-Battery Installation
-Turning the Power ON/OFF
-Sleep Mode
Playing Movie Clips Using QuickTime Player 6....................18.
Page 3
1.
Welcome
This camera is not resistant to water and should not be used
outdoors in snow or rain. If accidentally dropped in water,
please quickly dry it in sunlight or an air-blower.
Protect this camera from excessive humidity, as it might wet the
lens and produce blurry pictures.
Do not attempt to disassemble the camera yourself. Always take it
to an authorized service facility for repair.
To store the camera, wrap it in a clean, soft cloth and place
it in a cool, dry, dust-free place.
Thank you for choosing the Mustek GSm@rt S40 Digital Camera.
Page 4
2.
Package Contents
Digital Camera
Installation CD (including camera drivers,
software and User's Manual)
USB Cable
Getting Started Guide
Video Cable
Carry Bag
Strap
Page 5
3.
System Requirements
PC/Notebook computer with Pentium 166 Mhz minimun processor
and USB port.
Windows 98SE/ME/2000/XP, CD- ROM drive, color monitor, mouse
and keyboard.
NOTE:
For transferring still images or for video conferening,your computer
must have a modem, and communication software and an internet
connection.
Page 6
4.
OSD Menu ON / OFF
LCD, Status Icons ON / OFF
Up / Zoom in / Previous
Menu Enter / Playback
Down / Zoom out / Next
Identifying The Parts
Menu
DISPLAY
Page 7
5.
LCD Screen Display Definition
Camera Settings
2368X1776
2048X1536
1600X1200
1280X960
Page 8
6.
Battery Installation
Power Up
1. Open the battery cover.
2. Insert batteries in correct polarity(+ and -) as shown on the inside
of the battery door.
3. Close the battery cover.
Turning the Power ON/OFF
1. Push the Power button to turn the camera on.
2. To turn the camera OFF, press the Power button until the camera beeps
and the LCD screen goes blank.
Sleep Mode
1. When the camera is ON and is not used for 60 seconds, it will
automatically enter sleep mode to save battery power.
2. To re-activate the camera from sleep mode :
Press the Power button once.
The camera is ready to take pictures.
Page 9
7.
1. Power on the Camera. By default,
the camera will be in DSC (picture)
mode every time it is powered on.
2. Frame your target through the LCD
display or through the viewfinder.
3. Press the UP or DOWN button to
zoom in or out on your subject.
4. Press the Shutter Button to take a
picture.
5. To change exposure settings, hit
the "Menu" button and change the
"Exposure" option to the desired
setting.
6. You can also enter "Setup", as
shown in Page 5 (Camera Settings)
to change picture options.
NOTE:
The camera stores all pictures in the built-in
memory or memory card.
Taking & Playback Pictures on the Camera
Taking Pictures
1. Press the "Enter" button. You can
view your files by using the "Previous"
and "Next" buttons.
2. Press "Enter" button again to return to
Camera or Video mode.
Playback Pictures
Page 10
8.
1. Power on the camera.
1. Press the "Enter" button. You can
view your files by using the "Previous"
and "Next" buttons.
2. Hit the "Menu" button and select
"MODE".
2. Use the "Enter" button to playback
an AVI movie file.
3. Choose AVI and hit the "ENTER"
button.
4. Press the Shutter button to start
recording.
5. Press the Shutter button again to
stop recording.
3. Press "Enter" button for 3 secs again
to return to Camera or Video mode.
Taking & Playback Videos on the Camera
Taking Videos
Playback Videos
Page 11
8.
Driver and Software Installation
1. Insert Installation Disc and Select
"MEGA PIXEL DSC Driver" .
2. Click "Next" .
3. Click "Next" .
4. Click "Install" .
5. Click "Finsh" .
9.
Page 12
10.
Install ArcSoft PhotoImpression 4.0
1. Insert installation CD into your PC's
CD-ROM drive.
2. Introduction screen will appear
automatically.
3. Click "ArcSoft PhotoImpression 4.0".
4. Follow on-screen instructions.
Click "Next"
Click "Next"
Click "Finish"
Click "Next"
Click "Yes"
5. Re-starting your computer is
recommended.
NOTE: To find out more about
PhotoImpression 4.0
Or how to use it, consult
Online help by clicking"?"
Icon or "help" on the pull
-Down menu.
Page 13
11.
Install ArcSoft PhotoBase 3.0
1. Insert installation CD into your PC's
CD-ROM drive.
2. Introduction screen will appear
automatically.
3. Click "ArcSoft PhotoBase 3.0".
4. Follow on-screen instructions.
5. Re-starting your computer is
recommended.
NOTE: To find out more about
PhotoBase 3.0 or how
to use it, consult online
help by clicking"?" Icon
or "help" on the pull down menu.
Click "Next"
Click "Next"
Click "Finish"
Click "Yes"
Page 14
12.
Install ArcSoft VideoImpression 1.6
1. Insert installation CD into your PC's
CD-ROM drive.
2. Introduction screen will appear
automatically.
3. Click "ArcSoft VideoImpression 1.6 ".
4. Follow on-screen instructions.
5. Re-starting your computer is
recommended.
NOTE: To find out more about
VideoImpression 1.6 or
how to use it, consult
online help by clicking
"?" Icon or "help" on the
pull-down menu.
Click "Next"
Click "Next"
Click "Finish"
Click "Yes"
Page 15
12.
Install QuickTime Player 6
1. Insert installation CD into your PC's
CD-ROM drive.
2. Introduction screen will appear
automatically.
3. Click "QuickTime Player".
4. Follow on-screen instructions.
Finish
5. Re-starting your computer is
recommended.
NOTE: To find out more about
QuickTime Player 6 or
how to use it, consult
online help by clicking
"?" Icon or "help" on the
pull-down menu.
Click "Next"
Click "Next"
Click "Finish"
Click "Yes"
13.
Page 16
14.
Transferring Images
Transferring pictures and video to your computer
When connected to a computer in Mass Storage mode, the
camera will appear as a Removable Disk in the computer. Files can then
be copied from the camera to the computer.
(Turn on the camera and connect with USB cable .
The camera will set to Mode.)"Mass Storage"
1. Turn the camera on, then connect your
camera to a computer via USB cable.
2. In Windows (ME/2000/XP), your PC will
detect the camera after connection.
3. Double click My Computer on the Desktop.
5. Double click on the Removable Disk.
6. Double click on the DCIM folder.
7. You can now drag-and-drop files to your PC.
4. A removable disk drive appears.
NOTE:
NOTE:
For Windows 98SE users, please install the
installation CD first.
For Windows XP
For Windows XP
For Windows ME/2000
For Windows 98SE/ME/2000
Page 17
15.
1. Double-click the "PhotoImpression 4.0" icon
on the desktop.
2. PhotoImpression 4.0 introduction screen will appear.
3. Click "From Folder" button.
4. Click "Browse".
Transferring Images (Cont.)
Downloading photo via "PhotoImpression 4.0"
5. Click "Removable Disk DCIM" and OK.
6. Use editing tools available on-screen to modify image(s).
Page 18
16.
Photo and Sharing Management Using
PhotoBase 3.0
1. Double-click the "PhotoBase 3.0"
icon on the desktop.
2. PhotoBase 3.0 introduction screen will appear.
3. Open Album menu bar.
4. Select "Create New" and enter file name.
5. Open Album menu bar and select "Add Image".
6. Save the pictures to your computer.
7. Share and manage your pictures.
16.
Page 19
16.
Video Playback Using
VideoImpression 1.6
1. Double-click the "VideoImpression 1.6"
icon on the desktop.
2. VideoImpression 1.6 introduction screen will appear.
3. Click "New" button.
4. Click "Capture".
5. Video will begin playing.
(Please change camera to PC Camera Mode)
MENU \ Mode\ PC Camera
17.
Page 20
18.
Playing Movie Clips Using
QuickTime Player 6
1. Double-click the "QuickTime Player"
icon on the desktop.
2. "QuickTime Player" introduction screen will appear.
3. Open "File" menu bar and
Select "Open Movie in New Player".
4. Select "My Computer".
5. Click "Removable Disk".
6. Click on the video that you wish to play. (ex. SVI-0001)
7. Movie will begin playing .
(Please change camera to Mass Storage Mode)
MENU \ Mode\ Mass Storage
Page 21
13.
Uninstall Application Programs
Uninstalling ArcSoft PhotoImpression 4.0
1. Proceed to Start > Programs > ArcSoft> PhotoImpression 4.0
>Uninstall.
2. Follow on-screen instructions to uninstall software.
Uninstalling ArcSoft PhotoBase 3.0
1. Proceed to Start > Programs > ArcSoft> PhotoBase 3.0
>Uninstall.
2. Follow on-screen instructions to uninstall software.
Uninstalling ArcSoft VideoImpression 1.6
1. Proceed to Start > Programs > ArcSoft>VideoImpression 1.6
>Uninstall.
2. Follow on-screen instructions to uninstall software.
19.
Page 22
20.
Specifications
Image Sensor
Lens Specification
O/S
White Balance
Exposure Control
Frame Rate-Video Mode
Resolution
PC Interface
Fixed Focus Lens
Storage
Compression
Display
Zoom
Movie Clip
Video Output
Power Source
Dimensions
CMOS 2048 x 1536 pixels
F2.8, Sensor area 1/2"
f=8.45mm, view angle 53.2
Microsoft Windows 98SE/2000/ME/XP
Auto/Manual(day light/cloudy/tungsten/fluorescent)
Auto
QVGA: 320 x 240 pixels (25-30 fps)
2368 x 1776 pixels
2048 x 1536 pixels
1600 x 1200 pixels
1280 x 960 pixels
USB
1m~infinity
Internal 16MB, External MMC/SD Card Slot
(card not included)
JPEG ; MJPEG
1.5" Color TFT LCD
4X Digital Zoom
QVGA 320 x 240 pixels up to 110 seconds at 27fps
NTSC or PAL
AAA1.5V x 2
88mm x 60mm x 20mm
Loading...