Multiquip PS706020, PS706036, PS706030, PS706026, PS706016 User Manual

PARTS MANUAL

STAY-LEVEL HANDLEBAR SERIES

MODELS

PS706016

PS706020

PS706026

PS706030

PS706036

PAVEMENT SAW

(DEUTZ BF3L2011 DIESEL ENGINE)

Revision #8 (07/26/10)

To find the latest revision of this publication, visit our website at: www.multiquip.com

THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.

P/N 37558

PROPOSITION 65WARNING

Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:

Leadfromlead-basedpaints.

Crystallinesilicafrombricks.

Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.

Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

PAGE 2 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

SILICOSIS/RESPIRATORYWARNINGS

WARNING

SILICOSIS WARNING

Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis. In addition, California and some other authorities have listed respirable crystalline silica as a substance known to cause cancer. When cutting such materials, always follow the respiratory precautions mentioned above.

WARNING

RESPIRATORY HAZARDS

Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm. If you are unfamiliar with the risks associated with the particular process and/or material being cut or the composition of the tool being used, review the material safety data sheet and/or consult your employer, the material manufacturer/supplier, governmental agencies such as OSHA and NIOSH and other sources on hazardous materials. California and some other authorities, for instance, have published lists of substances known to cause cancer, reproductive toxicity, or other harmful effects.

Control dust, mist and fumes at the source where possible. In this regard use good work practices and follow the recommendations of the manufacturers or suppliers, OSHA/NIOSH, and occupational and trade associations. Water should be used for dust suppression when wet cutting is feasible. When the hazards from inhalation of dust, mists and fumes cannot be eliminated, the operator and any bystanders should always wear a respirator approved by NIOSH/MSHA for the materials being used.

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 3

PS7060 SERIES SAWS

Proposition 65 Warning ..................................................	2
Silicosis/Respiratory Warnings ......................................	3
Table of Contents...........................................................	4
Parts Ordering Procedures ............................................	5
Explanation of Code in Remarks Column ......................	6
Suggested Spare Parts .................................................	7
Nameplates and Decals .............................................	8-9
Control Panel Decals ..............................................	10-11
Electrical Control Assembly ...................................	12-13
Console Mounts Assembly.....................................	14-15
Rear Console Access Panel Assembly ..................	16-17
Light Connector/Dash Access Assembly ...............	18-19
Belt and Engine Guards Assembly.........................	20-21
Depth Indicator/Stop Switch Assy. (Old Style) .......	22-23
Depth Indicator/Stop Switch Assy. (New Style) ......	24-25
F-N-R Assembly .....................................................	26-27
Fuel Assembly .......................................................	28-29
Battery Assembly ...................................................	30-31
Stay-Level Handlebars Assembly ..........................	32-33
Handlebar Boot Assembly ......................................	34-35
Water System Assembly ........................................	36-37
Engine Assembly ...................................................	38-39
Throttle Control Assembly ......................................	40-41
Engine Mounts Assembly ......................................	42-43
Air Cleaner Assembly .............................................	44-45
Muffler Assembly ...................................................	46-47
Lift Bail Assembly ..................................................	48-49
Platform Guards/Rear Pointer Assembly ................	50-51
Wheel Drive Assembly ...........................................	52-53
Front Axle Assembly ..............................................	54-55
Hydraulic System Assembly ..................................	56-57
Engine Pivot Cylinder Assembly ............................	58-59
Hydraulic Hoses Assembly ....................................	60-61
Hydraulic Fttings and Clamps Assembly................	62-63
Front Pointer Assembly ..........................................	64-65
Belt Drive Assembly...............................................	66-69
Drive Pulley Assembly ...........................................	70-71
Bladeshaft Assembly .............................................	72-73
16", 20", 26" Bladeguard Assembly ......................	74-75
30", 36" Bladeguard Assembly ..............................	76-77
Optional Weight Kit Assembly ................................	78-79
Terms and Conditions of Sale — Parts........................	80

TABLE OF CONTENTS

NOTICE

Specification and part number are subject to change without notice.

PAGE 4 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

www.multiquip.com

PARTS ORDERING PROCEDURES

	Ordering parts has never been easier!
	Choose from three easy options:
		Effective:
		January 1st, 2006
	Best Deal! Order via Internet (Dealers Only):	If you have an MQ Account, to obtain a Username
	Order parts on-line using Multiquip’s SmartEquip website!
		and Password, E-mail us at: parts@multiquip.
	N View Parts Diagrams	com.
	N Order Parts	To obtain an MQ Account, contact your
	N Print Specification Information	District Sales Manager for more information.

Goto www.multiquip.com and click on	Use the internet and qualify for a 5% Discount
Order Parts to log in and save!	on Standard orders for all orders which include
	complete part numbers.*
	Note: Discounts Are Subject To Change

				Order via Fax (Dealers Only):		Fax your order in and qualify for a 2% Discount
				All customers are welcome to order parts via Fax.		on Standard orders for all orders which include
				Domestic (US) Customers dial:		complete part numbers.*
				1-800-6-PARTS-7 (800-672-7877)
						Note: Discounts Are Subject To Change

Order via Phone: Domestic (US) Dealers Call:

1-800-427-1244

Non-Dealer Customers:							International Customers should contact
Contact your local Multiquip Dealer for
							their local Multiquip Representatives for
parts or call 800-427-1244 for help in
							Parts Ordering information.
locating a dealer near you.
When ordering parts, please supply:

R	Dealer Account Number	R Specify Preferred Method of Shipment:
R	Dealer Name and Address	UPS/Fed Ex	DHL
R	Shipping Address (if different than billing address)	N Priority One	Truck
R	Return Fax Number	N Ground
		N Next Day
R	Applicable Model Number
		N Second/Third Day

RQuantity, Part Number and Description of Each Part

NOTICE

All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 5

EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.

NOTICE

The contents and part numbers listed in the parts section are subject to change without notice.Multiquip does not guarantee the availability of the parts listed.

SAMPLE PARTS LIST

NO. PART NO.		PART NAME	QTY.	REMARKS
1	12345	BOLT......................	1 .....	INCLUDES ITEMS W/%
2%		WASHER, 1/4 IN............		NOT SOLD SEPARATELY
2%	12347	WASHER, 3/8 IN....	1 .....	MQ-45T ONLY

312348 HOSE ..................A/R ...MAKE LOCALLY

412349 BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

Unique Symbols — All items with same unique symbol

(@, #, +, %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the “Remarks” column.

Duplicate Item Numbers — Duplicate numbers indicate multiple part numbers, which are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.

NOTICE

When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.

PART NO. Column

QTY. Column

Numbers Used — Item quantity can be indicated by a number, a blank entry, or A/R.

A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length.

A blank entry generally indicates that the item is not sold separately.Other entries will be clarified in the “Remarks” Column.

REMARKS Column

Some of the most common notes found in the “Remarks” Column are listed below. Other additional notes needed to describe the item can also be shown.

Assembly/Kit — All items on the parts list with the same unique symbol will be included when this item is purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break — Used to list an effective serial number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW” “S/N XXXX AND ABOVE” “S/N XXXX TO S/N XXX”

Specific Model Number Use — Indicates that the part is used only with the specific model number or model number variant listed. It can also be used to show a part is NOT used on a specific model or model number variant.

Indicated by:

“XXXXX ONLY”

“NOT USED ON XXXX”

Numbers Used — Part numbers can be indicated by a number, a blank entry, or TBD.

TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number at the time of publication.

A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column.

“Make/Obtain Locally” — Indicates that the part can be purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts.

“Not Sold Separately”— Indicates that an item cannot be purchased as a separate item and is either part of an assembly/kit that can be purchased, or is not available for sale through Multiquip.

PAGE 6 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

SS7060 SANDERS SAW

1 TO 3 UNITS WITH DEUTZ TURBO DIESEL ENGINE

Qty.	P/N	Description
1 .......	37094 ..................	SWITCH, TOGGLE F-N-R
1 .......	37203 ..................	SWITCH, ROLLER PLUNGER
2 .......	406000 ................	SWITCH, ROCKER
2 .......	37132 ..................	FRONT WHEEL ASSEMBLY
2 .......	37095 ..................	REAR WHEEL
1 .......	29509 ..................	CAP, FUEL TANK
2 .......	560017 ................	GRIPS, HANDLEBAR
1 .......	H9406 ..................	BULB, GE H9406
1 .......	15503 ..................	KNOB, COMFORT
1 .......	37311 ..................	BALLVALVE, WATER SYSTEM
2 .......	570005 ................	CLAMP, MUFFLER
2 .......	37048 ..................	SPRING, WHEEL DRIVE
2 .......	582012 ................	BUSHING, QD
2 .......	915316 ................	SCREW, 5/8 - 11 X 3 LH GR8
2 .......	915315 ................	SCREW, 5/8 - 11 X 3 GR8
1 .......	574003 ................	ROPE, POINTER
1 .......	37212 ..................	THROTTLE ASSEMBLY
2 .......	200019 ................	MUDFLAP, BLADEGUARD
FOR SAWS WITH 16", 20", AND 26" BLADEGUARDS
2 .......	37168 ..................	FLANGE, INNER 5.0"
2 .......	37169 ..................	FLANGE ASSEMBLY, OUTER 5.0"
2 .......	926790 ................	PIN, DOWEL
2 .......	362000 ................	HOSE, WATER #6LP (16" BLADEGUARD)
2 .......	362005 ................	HOSE, WATER #6LP (20" BLADEGUARD)
2 .......	362006 ................	HOSE, WATER #6LP (26" BLADEGUARD)
FOR SAWS WITH 30" AND 36" BLADEGUARDS
2 .......	37177 ..................	FLANGE, INNER 6.0"
2 .......	37176 ..................	FLANGE ASSEMBLY, OUTER 6.0"
2 .......	926790 ................	PIN, DOWEL
2 .......	362007 ................	HOSE, WATER #6LP (30" BLADEGUARD)
2 .......	362008 ................	HOSE, WATER #6LP (36" BLADEGUARD)

NOTICE

Part numbers on this Suggested Spare Parts List may supercede/replace the P/N's shown in the text pages of this manual.

SUGGESTED SPARE PARTS

ENGINE PARTS FOR DEUTZ TURBO DIESEL ENGINE

2 .......	1174416 ..............	OIL FILTER, DEUTZ BF3L2012
2 .......	304010 ................	FUEL FILTER, DEUTZ BF3L2011
2 .......	P772579 ..............	PRIMARY AIR FILTER ELEMENT
2 .......	P775300 ..............	SAFETY AIR FILTER, DEUTZ BF3L2014
2 .......	21004-003 ...........	FAN BELT, AX-35
2 .......	520007 ................	DRIVE BELT, 5G 3VX-530
1 .......	406017 ................	IGNITION SWITCH, W/KEY
2 .......	406017-1 .............	KEY, IGNITION
2 .......	306006 ................	FILTER, TRANSMISSION

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 7

NAMEPLATES AND DECALS

NAMEPLATES AND DECALS

PAGE 8 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

NAMEPLATES AND DECALS

NAMEPLATES AND DECALS
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	37362	DECAL, STAY LEVEL HANDLE WHITE	2
2	20936	DECAL, MQ MULTIQUIP 5.93 X 7.45	2
3	37365	DECAL, MQ PS7060	2
4		SERIAL TAG ............................................................	1 ..................	CONTACT PARTS DEPT.
5	M600002	DECAL, DIESEL FUEL ONLY	1
6	25482	DECAL, MQ LOGO 3.0 X 3.75	1
7	37161	DECAL, HOT ISO HI-TEMPERATURE ....................	1 ..................	SAFETY ITEM
8	13118	DECAL, POWDER COATED	1
9	20525	DECAL, WARNING "PROP 65" 3.25 X 4.25 ............	1 ..................	SAFETY ITEM
10	36092	DECAL, WARNING DIESEL FUEL 3.5 X 1.75 .........	1 ..................	SAFETY ITEM
11	36090	DECAL, WARNING VENTILATION 2 X 4 .................	1 ..................	SAFETY ITEM
12	11912	DECAL, PATENT PENDING	1
13	25282	DECAL, ATTENTION BATTERY DISCONNECTED	1
14	35137	DECAL, WARNING READ MANUAL ........................	1 ..................	SAFETY ITEM
15	36099	DECAL, PROTECTIVE CLOTHING ISO BLUE ........	1 ..................	SAFETY ITEM
16	37540	DECAL, HYDRAULIC RESERVOIR	1
17	21302	DECAL, WARNING KEEP GUARDS IN PLACE ......	2 ..................	SAFETY ITEM
18	22122-001	DECAL, WARNING RX-W ........................................	2 ..................	SAFETY ITEM
19	25249-001	DECAL, WARNING KEEP HANDS CLEAR .............	2 ..................	SAFETY ITEM
20	25250-001	DECAL, WARNING KEEP FEET CLEAR ................	2 ..................	SAFETY ITEM
21	25678	DECAL, BLADE ROTATION CCW ............................	1 ..................	SAFETY ITEM
22	23330-001	DECAL, CAUTION BELT DRIVE	2
23	606004	DECAL, GUARD REMOVAL .....................................	2 ..................	SAFETY ITEM
24	25491	DECAL, BLADE ROTATION CW	1
25	11092	DECAL, CE	1

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 9

CONTROL PANEL DECALS

CONTROL PANEL DECALS

1

2

ENGINE

HYDRAULIC SYSTEM

MAINTENANCE INSTRUCTIONS

LUBRICATION

Belt Tension:

DRIVE BELTS

Bladeshaft drive belt tension is applied hydraulically when

Air filter:

Replace outer element when the SYSTEMS

Oil Level:

Check reservoir daily. Fill reservoir to

Service:

Grease every 125 hrs. of operation.

STATUS air filter restriction light comes on.

line marked FULL COLD.

Type:

Use premium grade waterproof

bladeshaft drive is engaged.

To Adjust

Perform following procedure with saw fully lowered.

EP (extreme pressure) grease.

Replace inner element every fourth outer element.

Oil type:

15W-40 premium grade engine oil.

Note:

Drive Belt

Oil:

Check oil level daily, do not overfill.

Oil Service:

Change oil and filter every 500 hours of

Locations:

Front axle pivot bearings (2), lift

Loosen jam nut on belt tension limiting bolt. Turn belt tension limiting bolt

Wheel drive propulsion system, lift pump,

Tension:

Oil type:

See Engine Manual.

operation or annually, whichever occurs first.

cylinder pins (2), engine tilt cylinder

counterclockwise to create ½” minimum distance between end of bolt and frame.

and oil bath bladeshaft share common

Start engine and engage belt drive; increase engine speed to full throttle position for

Oil Service:

Change oil and filter every 125 hours

Reservoir

Reservoir is located inside console. Remove

hydraulic oil reservoir, thus are maintained

pin (1).

of operation.

Location:

rear panel for access.

15 seconds minimum. Slow engine speed to idle and shut engine off. Turn belt

as a single system.

Fuel Filter:

Change fuel filter every 250 hours of operation.

tension limiting bolt clockwise until bolt lightly contacts frame. Tighten locknut.

THROTTLE	AUXILIARY	LIGHTS	BLADESHAFT	IGNITION SWITCH	BLADE SPEED	TACHOMETER	ENGINE WILL NOT CRANK
							OR START WHEN E-STOP
	ON	ON	DIS-ENGAGE		ENGINE PRE-HEAT		BUTTON IS DEPRESSED
					GLOW PLUG
				START
				ON
TO INCREASE ENGINE SPEED: TURN KNOB COUNTERCLOCKWISE.				ENGINE
	OFF	OFF	ENGAGE	PRE-HEAT
TO REDUCE ENGINE SPEED: TURN KNOB CLOCKWISE.				OFF
FOR QUICK THROTTLE ACTION: DEPRESS RED BUTTON AND					SYSTEMS STATUS
PUSH OR PULL KNOB.

3

DEPTH STOP CONTROL

To Control Depth of Cut with Saw

Running and Blade Mounted:

Step 1: Raise saw above desired cutting depth. Step 2: Turn depth control knob counterclockwise until saw cannot be lowered by pushing raise/lower switch forward.

Step 3: Hold raise/lower switch in the lowering position and rotate the depth control knob clockwise until desired cutting depth is achieved. The saw will repeat to the same depth until re-adjusted.

To Re-adjust for Full Cutting Depth:

Hold raise/lower switch in the lowering position and rotate the depth control knob clockwise until saw is fully lowered. Rotate depth control knob clockwise additional 1 turn.

WATER

FLOW

CONTROL

ADJUST WATER FLOW VALVE

FOR DESIRED WATER FLOW

DEPTH INDICATOR

	5	6	7
	150	175	8
4
	125		200
100			230	9
3
				255	10
75
				280

11

2

50

305

12

			330
1	25			13
			355
			380
			14
		0
	0	MM	15

INCH

TO ADJUST CUT DEPTH INDICATOR:

LOWER SAW UNTIL BLADE CONTACTS

SURFACE, ADJUST DIAL TO ZERO.

BLADESHAFT ROTATION DIS-ENGAGEMENT SYSTEM

Engine must be at idle when engaging or

dis-engaging bladeshaft drive.

To stop bladeshaft rotation:

Push rocker switch labeled BLADESHAFT forward.

Engine will tilt forward, dis-engaging the belt drive.

To start bladeshaft rotation:

Push rocker switch labeled BLADESHAFT backward.

Engine will tilt back, engaging belt drive.

WARNING

ENGINE MUST BE SHUT OFF		when removing or installing
blade or bladeguard or performing any type of service
to bladeshaft or any other component on machine!
NEVER	attempt to remove or install blade or bladeguard

with engine running by dis-engaging the belt drive!

NEVER	attempt to service any component with the
engine running!
NEVER	leave saw unattended while engine is running!

RAISE/LOWER

SWITCH

NEVER EXCEED BLADE MANUFACTURER'S RECOMMENDED RPM'S	FWD-NEUTRAL-REV
	CONTROL

				OPERATING INSTRUCTIONS
			BEFORE
				Check all fluid levels. Secure blade firmly to
FORWARD			STARTING:	bladeshaft. Make sure all protective guards
				are in place and properly mounted. Wear eye,
				ear protection and protective clothing.
			WATER	Connect water supply to water inlet. Move
			SUPPLY:	water ON/OFF CONTROL to ON position.
				Adjust WATER FLOW CONTROL lever to
				desired position. Drain watering system in
				cold weather to prevent damage due to
				freezing.
			BLADES:	Always follow blade manufacturer's
				recommendations for blade selection,
				speed and application.
				NEVER exceed blade manufacturer's
				maximum rated RPM. See operator's manual
				for detailed blade mounting instructions.
			STARTING	Set CONTROL HANDLE to NEUTRAL position.
			ENGINE:	Set THROTTLE to IDLE. Turn start switch to
				ON position. Wait for glow plug indicator light
NEUTRAL
				to go out. Momentarily turn switch to start
				position; release switch as soon as engine
				starts. Allow engine to warm up for several
				minutes before increasing engine speed. Use
				approved diesel fuel only.
			STOPPING
				Do not stop engine abruptly when hot! Reduce
			ENGINE:	THROTTLE to IDLE and allow engine to run 1
				to 2 minutes before turning ignition switch off.
				Damage to engine may occur if not allowed to
				cool adequately.
			FWD-	The panel mounted handle controls
			NEUTRAL-	FORWARD, NEUTRAL and REVERSE
			REV	operation. Neutral position stops or holds saw
				in a stationary position. Incremental
			CONTROL:	movement in the FORWARD or REVERSE
				direction will increase speed proportionate
				to amount of movement.
REVERSE			RAISE-
				RAISE-LOWER function is controlled by the
			LOWER	switch mounted at the right side of the
			FUNCTION:	CONTROL HANDLE. Push toggle switch
				lever forward to lower saw. Pull toggle switch
				lever backward to raise saw.
			BRAKES:	This saw is equipped with parking brakes.
				Brakes are applied automatically when engine
				is off and dis-engaged when engine is running.

WATER PUMP

ON

OFF

ON

WATER

OFF

PAGE 10 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

CONTROL PANEL DECALS

CONTROL PANEL DECALS
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	37361	DECAL, MAINTENANCE, 7000 SERIES	1
2	37354	DECAL, INSTRUMENT PANEL, 7000 SERIES	1
3	37353	DECAL, OPERATION CONSOLE PANEL	1

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 11

ELECTRICAL CONTROL ASSY.

ELECTRICAL CONTROL ASSY.

PAGE 12 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

ELECTRICAL CONTROL ASSY.

ELECTRICAL CONTROL ASSY.
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	406000	SWITCH, ROCKER CH# M-58031-01	2
2	406017	IGNITION SWITCH, WITH KEYS ............................	1...................	INCLUDES ITEMS W/*
3	37198	EMERGENCY STOP SWITCH ................................	1 ..................	SAFETY ITEM
4	37094	SWITCH, TOGGLE SPDT MOMENTARY ON-ON	1
5	37203	SWITCH, SNAP ACTION ROLLER PLUNGER	1
6	37490	HARNESS, RELAYS AND CIRCUIT BREAKERS	1
7	406021	INDICATOR, ENGINE	1
8	37243	SWITCH, ROLLER ARM	1
9	933240	WASHER, FLAT SAE 1/4 GRD 9 YZ	3
10	405000	CONNECTOR, 4-WAY SOCKET	1
11	37368	TACHOMETER, ELECTRIC 0-3000 RPM	1
12	8381	BOOT,TOGGLE SWITCH	1
13	406020	BLANK, ROCKER SWITCH	2
14	973752	SCREW, BHHC 1/4 - 20 X 5/8 SS	3
15	37325	SCREW, SHC M5 - 0.8 X 30MM	2
16	37324	NUT, NYLOC M5 - 0.8	2
17	28922-058	WASHER, M5	2
18*	406017-1	KEY, IGNITION	1
19	25628	SOLENOID, LIFT PUMP	1

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 13

CONSOLE MOUNTS ASSY.

CONSOLE MOUNTS ASSY.

PAGE 14 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

CONSOLE MOUNTS ASSY.

CONSOLE MOUNTS ASSY.
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	20742	ISOLATOR, RB2 RING/BUSHING	4
2	20743	WASHER, ISO SNUB KROFUND DYN 148099-18	4
3	575001	RUBBER ISOLATOR, TPC# 60166-1	4
4	37231-753	MOUNT, ISOLATOR FRONT	2
5	37233-753	MOUNT, ISOLATOR SIDE	2
6	37227-753	MOUNT, CONSOLE ISOLATOR FRONT	2
7	12832	WASHER, SNUBBING	4
8	06503-026	SCREW, HHC 1/2 - 13 X 3-1/4	4
9	1665	SCREW, HHC 3/8 - 16 X 2	4
10	37116-753	CONSOLE W/A	1
11	933242	WASHER, FLAT SAE 3/9 GRD 9 Y	8
12	0205	SCREW, HHC 3/8-16 X 1	8
13	TBD	SCREW	4
14	TBD	WASHER	4

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 15

REAR CONSOLE ACCESS PANEL ASSY.

5

8

6

1

2

4

7

3

9

PAGE 16 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

REAR CONSOLE ACCESS PANEL ASSY.

REAR CONSOLE ACCESS PANEL ASSY.
NO.	PART NO.	PART NAME	QTY.	REMARKS
1*	10024	NUT, NYLOC 1/4 X 20	4
2*	10930	WASHER, FENDER 1/4 X 1-1/4	4
3*	12287	SCREW, THP 1/4 - 20 X 3/4 SS	4
4*	29057	DOCUMENT BOX	1
5	37219	STRIP, BACKING PLATE SAW CONSOLE	1
6	37220	STRIP, VERTICAL SAW CONSOLE	2
7*	37254-753	PANEL, REAR SAW ACCESS	1
8*	560020	LATCH, REAR SAW ACCESS PANEL	2
9	37253	PANEL ASSEMBLY, REAR SAW ACCESS ............. 1 .................. INCLUDES ITEMS W/*

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 17

LIGHT CONNECTOR/DASH ACCESS ASSY.

LIGHT CONNECTOR/DASH ACCESS ASSY.

PAGE 18 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

LIGHT CONNECTOR/DASH ACCESS ASSY.

LIGHT CONNECTOR/DASH ACCESS ASSY.
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	0655	SCREW, HHC 5/16 - 18 X 3/4	8
2*	12171	SEAL, WEATHERPACK 16-18 GA,GREEN	2
3*	12176	CONNECTOR, WEATHERPACK 2 PIN MALE	1
4*	12179	TERMINAL, WEATHERPACK MALE 14-16 GA	2
5	13287	NUT, NYLOC 8-32	2	INCLUDES ITEMS W/*
6	25865	HARNESS, LIGHT KIT ............................................	1 ..................
7	37234-753	COVER W/A, CONSOLE DASH ACCESS	1
8	923114	SCREW, SHC 8-32 X 1/2	2
9	933241	WASHER, FLAT SAE 5/16 GRD 9YZ	8
10*	405000	CONNECTOR, 4-WAY SOCKET CHROME	1
11+#	0161 C	WASHER, LOCK 5/16 MED	2
12+#	0161 D	NUT, HEX 5/16 - 18	2
13+#	0300 A	SCREW, HHC 5/16 - 18 X 2	1
14+	2532	LIGHT ASSEMBLY ..................................................	1 ..................	INCLUDES ITEMS W/#
15+	15503	KNOB, COMFORT GRIP STAR	1
16+	120206	LIGHT BAR	1
17+	405001	CONNECTOR PLUG, 4-PIN FEMALE	1
18+	405002	CORD, LIGHT EXTENDABLE	1
19+#	H9406	BULB, GE H9406	1
20	M18004	LIGHT KIT, SAW ......................................................	1 ..................	INCLUDES ITEMS W/+
21#	11963	BOLT, CARRIAGE 5/16 - 18 X 1	1

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 19

BELT AND ENGINE GUARDS ASSY.

PAGE 20 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

BELT AND ENGINE GUARDS ASSY.

BELT AND ENGINE GUARDS ASSY.
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	0166	SCREW, HHC 3/8 - 16 X 7/8	5
3	15503	KNOB, COMFORT	1
4	37202-753	GUARD, BELT DRIVE ..............................................	1 ..................	SAFETY ITEM
5	37209-753	GUARD, ENGINE .....................................................	1 ..................	SAFETY ITEM
8	584011	WRENCH, 15/16 BLADE CLOSED END	1
9	933242	WASHER, FLAT SAE 3/8 GRD 9 YZ	5

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 21

DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)

DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)

PAGE 22 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)

DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	10024	NUT, NYLOC 1/4 - 20	2
2	37155	PULLEY, CABLE .75 OD	1
3	37235	BASE, SAW DEPTH INDICATOR	1
4	37240	PULLEY, CABLE .75 OD	2
5	37241	SHAFT, DEPTH INDICATOR	1
6	37332	RING, 3/16 E-STYLE EXTERNAL	2
7	37401	SCREW, SH SHLDR 1/2-20, 5/16 OD X 1/4 L	1
8	37504	CABLE, NYLON COAT SS .049	1
9	110031	POINTER, CONCRETE SAW DEPTH	1
10	460019	FLANGE, BEARING 0.25 ID X 0.75 OD	1
11	560025	KNOB, SAW DEPTH INDICATOR	1
12	565005	SPRING, EXTENSION	1
13	583059	SHIM, 0.375 OD X 0.25 ID X .020 THK	5
14	584025	STUD, 1/4 - 20 X 1-3/4 NO PLT	1
15	933240	WASHER, FLAT SAE 1/4 GRD 9 YZ	1
16	973752	SCREW, BHSC 1/4 - 20 X 5/8 SS	2
17	37248	MOUNT, SWITCH PIVOT PLATE	1
18	37246	NUT, SWIVEL DEPTH STOP	1
19	37247	KNOB, DEPTH STOP CONTROL	1
20	37249	COLLAR, SHAFT THREADED 3/8 - 16	1
21	37250	WASHER, BELLEVIEW .317 X .625	2
22	19470	WASHER, FLAT 5/16 USS	2
23	933242	WASHER, FLAT SAE 3/8 GRD 9 YZ	1
24	5283	NUT, NYLOC 5/16 - 18	2
25	10133	NUT, NYLOC 3/8 - 16	1
26	37251	WASHER, BELLEVIEW .389 X .750	2
27	37375	STUD, 3/8 - 16 X 4	1
28	4001	WASHER, FLAT USS 3/8 PLD	3

NOTICE

Parts on this page are no longer available. See Depth

Indicator/Stop Switch Assy. (New Style).

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 23

DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)

DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)

6

10

5

19

13

14

3

10 10

8

4

9 16

17

15

17

2

1

9

19 2

10

4

12

20

11

7

18

PAGE 24 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)

DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)

DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)
NO.	PART NO.	PART NAME	QTY.	REMARKS
1	37544	SHAFT, DEPTH INDICATOR	1
2	37545	BUSHING, FLANGED	2
3	37547	SHAFT, IDLER PULLEY	2
4	37548	PULLEY, IDLER	2
5	110031	POINTER, CONCRETE SAW DEPTH	1
6	560025	KNOB, SAW DEPTH INDICATOR	1
7	37549	PULLEY, DUAL GROOVE	1
8	37550	BELT, INDICATOR DRIVE	1
9	0948	WASHER, FLAT SAE 1/4	3
10	37332	RING, 3/16 E-STYLE EXTERNAL	6
11	926149	SCREW, SHDLR 1/4D X 5/16L, 10-24 SCKT HD	1
12	37162	SPRING, EXTENSION	1
13	973752	SCREW, BHSC 1/4 - 20 X 5/8 SS	2
14	37551	HOUSING, DEPTH INDICATOR	1
15	37557	BRACKET, CABLE INDICATOR	1
16	2295	SCREW, HHC 1/4 - 20 X 7/8	1
17	10024	NUT, NYLOC 1/4 - 20	2
18	37401	SCREW, SH SHLDR 1/2-20, 5/16 OD X 1/4 L	1
19	37679	RING, SNAP SH 87	2
20	37678	CABLE ASSY., DEPTH INDICATOR	1

NOTICE

Parts on this page replace those listed on Depth

Indicator/Stop Switch Assy. (Old Style).

PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 25