MSI H61MA-E35 User Manual

0 (0)

H61MA-E35 (B3)/

H61M-E21 (B3)

series

MS-7740 (v1.x) Mainboard

G52-77401X1

Preface

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR INTERNA-

TIONAL. We take every care in the preparation of this document, but no guarantee is

given as to the correctness of its contents. Our products are under continual improve-

ment and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

￭ MSI

is registered trademark of Micro-Star Int’l Co.,Ltd.

￭ NVIDIA

is registered trademark of NVIDIA Corporation.

￭ ATI

is registered trademark of AMD Corporation.

￭ AMD

is registered trademarks of AMD Corporation.

￭ Intel

is registered trademarks of Intel Corporation.

￭ Windows

is registered trademarks of Microsoft Corporation.

￭ AMI

is registered trademark of American Megatrends Inc.

￭ Award

is a registered trademark of Phoenix Technologies Ltd.

￭ Sound Blaster

is registered trademark of Creative Technology Ltd.

￭ Realtek

is registered trademark of Realtek Semiconductor Corporation.

￭ JMicron

is registered trademark of JMicron Technology Corporation.

￭ Netware

is registered trademark of Novell, Inc.

￭ Lucid

is trademark of LucidLogix Technologies, Ltd.

￭ VIA

is registered trademark of VIA Technologies, Inc.

￭ ASMedia

is registered trademark of ASMedia Technology Inc.

￭ iPad, iPhone, and iPod are trademarks of Apple Inc.

Revision History

Revision Revision History Date

V1.0 First release 2011/05

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively, please

try the following help resources for further guidance.

◙ Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates,

and other information:

http://www.msi.com/service/download/

◙ Contact our technical sta󰘯 at:

http://support.msi.com/

iii

MS-7740

Preface

Safety Instructions

￭ Always read the safety instructions carefully.

￭ Keep this User’s Manual for future reference.

￭ Keep this equipment away from humidity.

￭ Lay this equipment on a reliable 󰘱at surface before setting it up.

￭ The openings on the enclosure are for air convection hence protects the equipment

from overheating. DO NOT COVER THE OPENINGS.

￭ Make sure the voltage of the power source and adjust properly 110/220V before

connecting the equipment to the power inlet.

￭ Place the power cord such a way that people can not step on it. Do not place any-

thing over the power cord.

￭ Always Unplug the Power Cord before inserting any add-on card or module.

￭ All cautions and warnings on the equipment should be noted.

￭ Never pour any liquid into the opening that could damage or cause electrical

shock.

￭ If any of the following situations arises, get the equipment checked by service

personnel:

◯ The power cord or plug is damaged.

◯ Liquid has penetrated into the equipment.

◯ The equipment has been exposed to moisture.

◯ The equipment does not work well or you can not get it work according to User’s

Manual.

◯ The equipment has dropped and damaged.

◯ The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

C (140

F),

IT MAY DAMAGE THE EQUIPMENT.

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，

使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling special disposal.

Preface

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found

to comply with the limits for a Class B digi-

tal device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment o󰘯 and on, the user is encouraged to try to correct the

interference by one or more of the measures listed below.

◯ Reorient or relocate the receiving antenna.

◯ Increase the separation between the equipment and receiver.

◯ Connect the equipment into an outlet on a circuit di󰘯erent from that to which the

receiver is connected.

◯ Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modi󰘰cations not expressly approved by the party responsible for com-

pliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply

with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that may

cause undesired operation.

Micro-Star International

MS-7740

Preface

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must re-

mind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electron-

ic Equipment, Directive 2002/96/EC, which takes e󰘯ect on August 13, 2005,

products of “electrical and electronic equipment” cannot be discarded as mu-

nicipal wastes anymore, and manufacturers of covered electronic equipment

will be obligated to take back such products at the end of their useful life. MSI will com-

ply with the product take back requirements at the end of life of MSI-branded products

that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elek-

tro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI

hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in

die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus

zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt aus-

schliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et a󰘰n de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement élec-

triques et électroniques, directive 2002/96/EC, prenant e󰘯et le 13 août 2005, que les

produits électriques et électroniques ne peuvent être déposés dans les décharges ou

tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de

récupérer certains produits en 󰘰n de vie. MSI prendra en compte cette exigence relative

au retour des produits en 󰘰n de vie au sein de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Preface

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equi-

pos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos

clasi󰘰cados como “eléctricos y equipos electrónicos” no pueden ser depositados en

los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,

están obligados a hacerse cargo de dichos productos al termino de su período de vida.

MSI estará comprometido con los términos de recogida de sus productos vendidos en

la Unión Europea al 󰘰nal de su periodo de vida. Usted debe depositar estos productos

en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una

empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kun-

nen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten

worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.

MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI

dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op

lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj

sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Di-

rektiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju

pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i

proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog

uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda

kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proiz-

vode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako 󰘰rma dbająca o ekologię, MSI przy-

pomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektry-

cznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia

2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być trak-

towane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani

do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni

wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wy-

cofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach

zbiorczych.

vii

MS-7740

Preface

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC

Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli

ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların

üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü

olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI

ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama

noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se

tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-

jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,

prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat

v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve

az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-

tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos

és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az

ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavé-

telére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapc-

solatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek

esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre

viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici

ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti

alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come

ri󰘰uti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto

alla 󰘰ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti

marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla 󰘰ne del loro

ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

viii

Preface

▍CONTENTS

Trademarks .................................................................................................... ii

Revision History............................................................................................. ii

Technical Support.......................................................................................... ii

Safety Instructions .........................................................................................iii

FCC-B Radio Frequency Interference Statement.......................................... iv

WEEE (Waste Electrical and Electronic Equipment) Statement .................... v

Chapter 1 Getting Started............................................................................1-1

Mainboard Speci󰘰cations ..................................................................................... 1-2

Mainboard Layout ................................................................................................1-4

Packing Contents ................................................................................................. 1-5

Optional Accessories ...........................................................................................1-5

Chapter 2 Hardware Setup ..........................................................................2-1

Quick Components Guide .................................................................................... 2-2

Screw Holes ......................................................................................................... 2-3

CPU (Central Processing Unit) ............................................................................2-4

Memory ................................................................................................................ 2-7

Power Supply ....................................................................................................... 2-9

Back Panel ......................................................................................................... 2-10

Connectors ......................................................................................................... 2-12

Jumper ............................................................................................................... 2-17

Slots ................................................................................................................... 2-18

Chapter 3 BIOS Setup .................................................................................3-1

Entering Setup .....................................................................................................3-2

The Menu Bar ......................................................................................................3-4

Main Menu ...........................................................................................................3-5

Advanced ............................................................................................................. 3-6

Overclocking ......................................................................................................3-11

M-Flash .............................................................................................................. 3-16

Security .............................................................................................................. 3-17

Boot .................................................................................................................... 3-19

Save & Exit .........................................................................................................3-20

Appendix A Realtek Audio .......................................................................... A-1

Installing the Realtek HD Audio Driver .................................................................A-2

Software Con󰘰guration .........................................................................................A-3

Hardware Default Setting .....................................................................................A-5

Thank you for choosing the H61MA-E35 (B3)/ H61M-E21

(B3) Series (MS-7740 v1.X) Micro-ATX mainboard. The

H61MA-E35 (B3)/ H61M-E21 (B3) Series mainboards

are based on Intel

H61 (B3) chipsets for optimal system

e󰘲ciency. Designed to 󰘰t the advanced Intel

LGA1155

processor, the H61MA-E35 (B3)/ H61M-E21 (B3) Series

deliver a high performance and professional desktop

platform solution.

Chapter 1 Getting Started

1-2

Getting Started

Mainboard Speci󰘰cations

Processor Support

■ Intel

Core

i7/ Core

i5 /Core

i3/ Pentium

/ Celeron

processor in the LGA1155

package

(For the latest information about CPU, please visit

http://www.msi.com/service/cpu-support)

Chipset

■ Intel

H61 (B3) chipset

Memory Support

■ 2 DDR3 DIMMs support DDR3 1333/ 1066 DRAM (16GB Max)

■ Supports Dual-Channel mode

(For more information on compatible components, please visit

http://www.msi.com/service/test-report/)

LAN

■ Supports LAN 10/100/1000 by Realtek

RTL8111E (H61MA-E35 (B3))

■ Supports LAN 10/100 by Realtek

RTL8105E (H61M-E21 (B3))

Audio

■ Chip integrated by Realtek

ALC887

■ Flexible 8-channel audio with jack sensing

■ Compliant with Azalia 1.0 Spec

SATA

■ 4 SATA 3Gb/s ports by Intel

H61 (B3)

■ 2 SATA 6Gb/s ports by ASMedia

ASM1061 (H61MA-E35 (B3))

Connectors

■ Back panel

- 1 PS/2 keyboard/mouse port

- 4 USB 2.0 ports

- 2 USB 3.0 ports (H61MA-E35 (B3))

- 1 HDMI port*

- 1 VGA port*

- 1 DVI-D port*

- 1 LAN port

- 6 󰘱exible audio ports (H61MA-E35 (B3))

- 3 󰘱exible audio ports (H61M-E21 (B3))

*(The HDMI, DVI and VGA ports only work with Integrated Graphics Processor)

■ On-Board

- 2 USB 2.0 connectors

- 1 Chassis Intrusion connector

- 1 S/PDIF-Out connector

- 1 Front Panel Audio connector

- 1 TPM Module connector

- 1 Serial connector

1-3

MS-7740

Chapter 1

Slots

■ 1 PCIE 2.0 x16 slot

■ 2 PCIE 2.0 x1 slots

Form Factor

■ M-ATX (24.5cm X 21.5 cm)

Mounting

■ 6 mounting holes

1-4

Getting Started

H61MA-E35 (B3)/ H61M-E21 (B3) Series

(MS-7740 v1.X) M-ATX Mainboard

Mainboard Layout

PCI_E3

PCI_E2

PCI_E1

BATT

JAUD1

SYSFAN

JPWR2

CPUFAN

JCI1

JBAT1

JUSB1

JCOM1

JUSB2

SATA3

JFP1

DIM M1

DIM M2

JPW R1

SATA4

Line-In

Line-Out

Mic

T:RS-Out

M:CS-Out

B:SS-Out

Top: VGAPort

Bottom: DVI-DPort

Top: LANJack

Bottom: USBports

USB3.0 ports(optional)

HDMIport

Top:mouse/

Bottom:USBports

keyboard

JSP1

JTPM1

JUSB_PW1

SATA5

(op tio na l)

SATA6

(op tio na l)

SATA1

SATA2

(optional)

1-5

MS-7740

Chapter 1

Packing Contents

* These pictures are for reference only and may vary without notice.

* The packing contents may vary according to the model you purchased.

* If you need to purchase the optional accessories, please visit http://www.msi.com/in-

dex.php to inquire the part numbers or consult the dealer.

Mainboard

Driver / Utility

DVD

User Guide Back IO Shield

M-Connector

SATA Cable

SATA Power

Cable

USB 2.0

Bracket

S/PDIF Out

Bracket

Optional Accessories

This chapter provides you with the information about

hardware setup procedures. While performing the instal-

lation, be careful in holding the components and follow-

ing the installation procedures. For some components, if

you install in the wrong orientation, the components will

not work properly.

Use a grounded wrist strap before handling computer

components. Static electricity may damage the compo-

nents.

Chapter 2 Hardware Setup

2-2

Hardware Setup

Quick Components Guide

Back Panel,

p.2-10

CPU, p.2-4

CPUFAN, p.2-13

DDR3, p.2-7

JPWR2, p.2-9

PCIE, p.2-18

SYSFAN, p.2-13

JAUD1, p.2-14

JSP1, p.2-15

JUSB1~2, p.2-14

JFP1, p.2-13

SATA1~6, p.2-12

JPWR1, p.2-9

JBAT1, p.2-17

JCI1, p.2-12

JCOM1, p.2-15

JTPM1, p.2-16 JUSB_PW1, p.2-17

2-3

MS-7740

Chapter 2

Screw Holes

When you install the mainboard, you have to place the mainboard into the chassis in the

correct direction. The locations of screws holes on the mainboard are shown as below.

Refer above picture to install stando󰘯s in the appropriate locations on chassis and then

screw through the mainboard screw holes into the stando󰘯s.

Important

•

To prevent damage to the mainboard, any contact between the mainboard circuit and

chassis or unnecessary stando󰘯s mounted on the chassis is prohibited.

•

Please make sure there are no metal components placed on the mainboard or within

the chassis that may cause short circuit of the mainboard.

Screw holes

The side has to

toward the rear,

the position for

the I/O shield of

the chassis.

2-4

Hardware Setup

CPU (Central Processing Unit)

When you are installing the CPU, make sure to install the cooler to prevent overheating.

If you do not have the CPU cooler, consult your dealer before turning on the computer.

For the latest information about CPU, please visit

http://www.msi.com/service/cpu-support/

Important

Overheating

Overheating will seriously damage the CPU and system. Always make sure the cooling

fan can work properly to protect the CPU from overheating. Make sure that you apply

an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to

enhance heat dissipation.

Replacing the CPU

While replacing the CPU, always turn o󰘯 the ATX power supply or unplug the power

supply’s power cord from the grounded outlet 󰘰rst to ensure the safety of CPU.

Overclocking

This mainboard is designed to support overclocking. However, please make sure your

components are able to tolerate such abnormal setting, while doing overclocking. Any

attempt to operate beyond product speci󰘰cations is not recommended. We do not guar

antee the damages or risks caused by inadequate operation or beyond product speci-

󰘰cations.

Introduction to LGA 1155 CPU

The surface of LGA 1155 CPU. Remember to apply some thermal paste on it for

better heat dispersion.

Alignment Key

Yellow triangle is the

Pin 1 indicator

Alignment Key

+ 40 hidden pages