MSI B85M-P32, CSM-H81M-P32 Owner's Manual

4 (1)

The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.

￭

NVIDIA® is registered trademark of NVIDIA Corporation.

￭

ATI® is registered trademark of AMD Corporation.

￭

AMD® is registered trademarks of AMD Corporation.

￭

Intel® is registered trademarks of Intel Corporation.

￭

Windows® is registered trademarks of Microsoft Corporation.

￭

AMI® is registered trademark of American Megatrends Inc.

￭

Award® is a registered trademark of Phoenix Technologies Ltd.

￭

Sound Blaster® is registered trademark of Creative Technology Ltd.

￭

Realtek® is registered trademark of Realtek Semiconductor Corporation.

￭

JMicron® is registered trademark of JMicron Technology Corporation.

￭

Netware® is registered trademark of Novell, Inc.

￭

Lucid® is trademark of LucidLogix Technologies, Ltd.

￭

VIA® is registered trademark of VIA Technologies, Inc.

￭

ASMedia® is registered trademark of ASMedia Technology Inc.

￭

iPad, iPhone, and iPod are trademarks of Apple Inc.

￭

Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

￭

Revision History

Revision Revision History Date

V.0

First release 203/06

Preface

G52-7846X



Safety Instructions

Preface

Always read the safety instructions carefully.

￭

Keep this User’s Manual for future reference.

￭

Keep this equipment away from humidity.

￭

Lay this equipment on a reliable 󰘱at surface before setting it up.

￭

The openings on the enclosure are for air convection hence protects the

￭

equipment from overheating. DO NOT COVER THE OPENINGS. Make sure the voltage of the power source is at 0/220V before connecting the

￭

equipment to the power inlet. Place the power cord such a way that people can not step on it. Do not place

￭

anything over the power cord. Always Unplug the Power Cord before inserting any add-on card or module.

￭

All cautions and warnings on the equipment should be noted.

￭

Never pour any liquid into the opening that can cause damage or cause electrical

￭

shock. If any of the following situations arises, get the equipment checked by service

￭

personnel:

The power cord or plug is damaged.

◯

Liquid has penetrated into the equipment.

◯

The equipment has been exposed to moisture.

◯

The equipment does not work well or you can not get it work according to

◯

User’s Manual. The equipment has been dropped and damaged.

◯

The equipment has obvious sign of breakage.

◯

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC

￭

(40oF), IT MAY DAMAGE THE EQUIPMENT.

Battery Information

European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan: For better environmental protection, waste batteries should be

廢電池請回收

collected separately for recycling or special disposal.

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o󰘯 and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

◯

Increase the separation between the equipment and receiver.

◯

Connect the equipment into an outlet on a circuit di󰘯erent from that to which

◯

the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

◯ Notice  The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7846

This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and

)

this device must accept any interference received, including interference that

may cause undesired operation.

Preface

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

Radiation Exposure Statement

Preface

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 999/59/EC, Council Recommendation of 2 July 999 on the limitation of exposure of the general public to electromagnetic 󰘰elds (0–300GHz). This wireless device complies with the R&TTE Directive.

Taiwan Wireless Statements

無線設備警告聲明經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更

頻率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應

立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement

クラス B 情報技術装置この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ

スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい取り扱いをしてください。

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

产品中有毒有害物质或元素名称及含量

根据中国<电子信息产品污染控制管理办法>

部件名称

电池 (Battery) ☓ 〇〇〇〇〇

电缆/ 连接器

(Cable/ Connector)

机箱/ 其他 (Chassis/ Other) ☓ 〇〇〇〇〇

光盘驱动器 (如CD, DVD等)

(Optical Disk Driver)

硬盘驱动器

(Hard Disk Driver)

印刷电路部件 (PCAs)* ☓ 〇〇〇〇〇

输出输入设备 (I/O Device)

(如Mouse, Keyboard等)

液晶显示屏 (LCD Panel) ☓ ☓ 〇〇〇〇

内存条 (Memory) ☓ 〇〇〇〇〇

处理器和散热器

(Processor and Heatsink)

軟件 (如CD、DVD等) 〇〇〇〇〇〇

电源 (Power Supply) ☓ 〇 ☓ 〇〇〇

遥控器 (Remote Control) ☓ 〇〇〇〇〇

扬声器 (Speakers) ☓ 〇〇〇〇〇

电视接收器 (TV Tunner) ☓ 〇〇〇〇〇

网络摄像头 (Web Camera) ☓ 〇〇〇〇〇

无线网卡 (Wireless Cards) ☓ 〇〇〇〇〇

*印刷电话部件包括所有印刷电路板(PCB)及其离散组件、IC。

■

上述有毒有害物质或元素清单会依产品出货现况之部件差异而有所增减。

■

〇: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/ T 36 3-

■

2006标准规定的限量要求下。 ☓:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T363-

■

2006标准规定的限量要求，但符合EU RoHS要求。本产品在中国销售之电子讯息产品都必须遵守中国<电子讯息产品污染控制要求

■

>标准贴上环保使用期限EPUP (Environmental Protection Use Period)标签。本产品使用之环保使用期限EPUP卷标符合中国-电子信息产品环保期限使用通

■

则(SJ/Z 388-2009)标示之要求（请参考下图EPUP卷标图标实例,标示内部之编号适用于各指定产品。）

铅

(Pb)汞(Hg)镉(Cd)

☓ 〇〇〇〇〇

有毒有害物质或元素

六价铬 (Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

Preface

WEEE Statement

Preface

WEEE (Waste Electrical and Electronic Equipment)

ENGLISH

To protect the global environment and as an environmentalist, MSI must remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes e󰘯ect on August 3, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen

Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et a󰘰n de protéger l’environnement, MSI tient à rappeler ceci... Au sujet de la directive européenne (EU) relative aux déchets des équipement

électriques et électroniques, directive 2002/96/EC, prenant e󰘯et le 3 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en 󰘰n de vie. MSI prendra en compte cette exigence relative au retour des produits en 󰘰n de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 3 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 3 de agosto de 2005, los productos clasi󰘰cados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al 󰘰nal de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat…. De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 3 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 3. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako 󰘰rma dbająca o ekologię, MSI przypomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 3 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

Preface

TÜRKÇE

Preface

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC

Kararnamesi altında 3 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických

výrobků 2002/96/EC platné od 3. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 3-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che…. In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali

Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 3 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come ri󰘰uti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla 󰘰ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla 󰘰ne del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

Contents

English ......................................................................................

Motherboard Speci󰘰cations ....................................................................................2

Optional Speci󰘰cations ...........................................................................................4

Back Panel ..............................................................................................................5

CPU & Heatsink Installation ....................................................................................6

Memory Installation .................................................................................................8

Internal Connectors.................................................................................................9

BIOS Setup .............................................................................................................26

한국어 .......................................................................................33

메인보드 사양 .........................................................................................................34

옵션 사양 .................................................................................................................36

후면 패널 .................................................................................................................37

CPU 및 히트싱크 설치 ............................................................................................38

메모리 설치 .............................................................................................................40

내장 커넥터 .............................................................................................................4

BIOS 설정 ...............................................................................................................48

Français ....................................................................................55

Spéci󰘰cations ..........................................................................................................56

Spéci󰘰cations en option ..........................................................................................58

Panneau Arrière ......................................................................................................59

Installation du CPU et son ventilateur .....................................................................60

Installation de mémoire ...........................................................................................62

Connecteurs internes ..............................................................................................63

Con󰘰guration BIOS .................................................................................................70

Deutsch ....................................................................................77

Spezi󰘰kationen........................................................................................................78

Optionale Spezi󰘰kationen .......................................................................................80

Rücktafel-Übersicht.................................................................................................8

CPU & Kühlkörper Einbau ......................................................................................82

Speicher ..................................................................................................................84

Interne Anschlüsse .................................................................................................85

BIOS Setup .............................................................................................................92

Preface

Русский ....................................................................................99

Характеристики системной платы .....................................................................00

Preface

Дополнительные характеристики ......................................................................02

Задняя панель .....................................................................................................03

Установка ЦП и радиатора .................................................................................04

Установка памяти ................................................................................................06

Внутренние разъемы ..........................................................................................07

Настройка BIOS ...................................................................................................4

简体中文 .................................................................................2

主板规格 ................................................................................................................22

选配规格 ................................................................................................................24

后置面板 ................................................................................................................25

CPU & 风扇安装 ....................................................................................................26

内存安装 ................................................................................................................28

内部接口 ................................................................................................................29

BIOS Setup ...........................................................................................................36

繁體中文 .................................................................................43

主機板規格 ............................................................................................................44

各型號搭載規格對應表 ..........................................................................................46

背板快速指南 ........................................................................................................47

安裝 CPU 與散熱風扇 ...........................................................................................48

安裝記憶體 ............................................................................................................50

內建接頭 ................................................................................................................5

BIOS 設定 .............................................................................................................58

日本語 .....................................................................................65

マザーボードの仕様 ..............................................................................................66

オプションの仕様 .................................................................................................68

I/Oパネル ..............................................................................................................69

CPUおよびヒートシンクの装着 ...........................................................................70

メモリの装着 ........................................................................................................72

内部コネクター .....................................................................................................73

BIOSの設定 ...........................................................................................................80

0

English

Top : mous e Bott om:ke yboar d

Top : Para llel Po rt

Bott om: COM po rtA VGA por t

Top: LAN J ack Bott om: USB 2.0 por ts

USB3 .0 port s

T:Line -In M:Li ne- Out B:Mi c-In

PCI_ E1

PCI_ E2

PCI2

PCI1

JCOM 2

JAUD 1

SYSFA N1

JUSB _PW1

JUSB _PW2

JTPM 1

JUSB 2JFP1

JFP2

JUSB 1

JCI1

JBAT1

SATA1

JPWR 1

SYSF

CPUFA N

DIMM 1

DIMM 2

JPWR 2

SATA2

SATA4

SATA3

J (

opti onal)

SB3

J (

opti onal)

SB3

Thank you for choosing the H8M-P32/ B85M-P32/ H87M-P32 Series (MS-7846 v.X) Micro-ATX motherboard. The H8M-P32/ B85M-P32/ H87M-P32 Series motherboards are based on Intel H8/ B85/ H87 chipset for optimal system e󰘲ciency. Designed to 󰘰t the advanced Intel LGA50 processor, the H8M-P32/ B85M-P32/ H87M-P32 Series motherboards deliver a high performance and professional desktop platform solution.

Layout

English



Motherboard Speci󰘰cations

CPU Support

Chipset Intel® H8/ B85/ H87 Express Chipset■

English

Memory Support

Expansion Slots

Onboard Graphics

Storage Intel H8/ B85/ H87 Express Chipset

USB Intel H8/ B85/ H87 Express Chipset

Audio Realtek® ALC887 Codec■

LAN Realtek® RTL8G Gigabit LAN controller■

Back Panel Connectors

4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 /

■

Pentium® / Celeron® processors for LGA 50 socket

2x DDR3 memory slots supporting up to 32GB

■

Supports DDR3 600/ 333/ 066 MHz

■

Dual channel memory architecture

■

Supports non-ECC, un-bu󰘯ered memory

■

x PCIe x6 slot (optional)

■

x PCIe 2.0 x slot

■

x VGA port, supporting a maximum resolution of 920x200

■

@ 60Hz, 24bpp

■

4x SATA ports (optional)

Supports RAID 0, RAID, RAID 5 and RAID 0 (optional)

Supports Intel Smart Response Technology (optional)*

Supports Intel Rapid Start Technology (optional)*

Supports Intel Smart Connect Technology

* Supports Intel Core processors on Windows 7 and Windows 8

■

4x USB 3.0 ports (2 ports on the back panel, 2 ports

available through the internal USB connector*) 6x USB 2.0 ports (2 ports on the back panel, 4 ports

available through the internal USB connectors)

* H8M-P32 uses NEC uPD720202 USB 3.0 controller for the

internal USB 3.0 connector.

x PS/2 keyboard port

■

x PS/2 mouse port

■

x Parallel port

■

x Serial port

■

x VGA port

■

2x USB 2.0 ports

■

2x USB 3.0 ports

■

x LAN (RJ45) port

■

3x audio jacks

■

2

Internal Connectors

BIOS Features

Form Factor Micro-ATX Form Factor

x 24-pin ATX main power connector

■

x 4-pin ATX 2V power connector

■

4x SATA connectors

■

2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)

■

x USB 3.0 connector (supports additional 2 USB 3.0 ports)

■

x 4-pin CPU fan connector

■

x 4-pin system fan connector

■

x 3-pin system fan connector

■

x Front panel audio connector

■

x Serial port connector

■

x TPM connector

■

2x System panel connectors

■

x Chassis Intrusion connector

■

x Clear CMOS jumper

■

2x USB power jumpers

■

UEFI AMI BIOS

■

ACPI 5.0, PnP .0a, SM BIOS 2.7, DMI 2.0

■

Multi-language

■

9.6 in. x 9.0 in. (24.4 cm x 22.8 cm)

■

For the latest information about CPU, please visit http://www.msi.com/service/cpu-support/

For more information on compatible components, please visit http://www.msi.com/service/test-report/

English

3

Optional Speci󰘰cations

Name

Speci󰘰cation

English

PCIe x6 slot Gen2 Gen3 Gen3

SATA, SATA2 SATA 6Gb/s SATA 6Gb/s SATA 6Gb/s

SATA3, SATA4 SATA 3Gb/s SATA 3Gb/s SATA 6Gb/s

BIOS ROM 64Mb 28Mb 28Mb

RAID Not supported Not supported Supported

Small Business Advantage

Intel Rapid Start Not supported Supported Supported

Intel Smart Response Not supported Not supported Supported

Intel Smart Connect Supported Supported Supported

H8M-P32 B85M-P32 H87M-P32

Not supported Supported Supported

4

Back Panel

PS/2 Mouse

PS/2 Keyboard USB 2.0

Parallel

USB 3.0

Serial Audio

VGA

LAN

LAN LED Indicator

LINK/ACT

LED

LED LED Status Description

Link/ Activity LED

Speed LED

SPEED

LED

O󰘯 No link

Yellow Linked

Blinking Data activity

O󰘯 0 Mbps connection

Green 00 Mbps connection

Orange  Gbps connection

Audio 2, 4, 6 or 8-channel con󰘰guration

Port 2-channel 4-channel 6-channel 8-channel

Blue Line in RS-Out RS-Out RS-Out

Green Line out FS-Out FS-Out FS-Out

Pink Mic Mic CS-Out CS-Out

Front audio - - - SS-Out

English

5

CPU & Heatsink Installation

When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and heatsink installation. Wrong installation can damage both the CPU and the motherboard.

English

Video Demonstration

Watch the video to learn how to install CPU & heatsink. at the address below.

http://youtu.be/bf5La099urI

. Push the load lever down to unclip it and lift to the fully open position.

2. The load plate will automatically lift up as the load lever is pushed to the fully open position.

Important

Do not touch the socket contacts or the bottom of the CPU.

3. Align the notches with the socket alignment keys. Lower the CPU straight down, without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is properly seated in the socket.

4. Close and slide the load plate under the retention knob. Close and engage the load lever.

CPU notches

Alignment Key

6

5. When you press down the load lever the PnP cap will automatically pop up from the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the CPU is removed from the socket.

6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the CPU. This will help in heat dissipation and prevent CPU overheating.

Thermal paste

7. Locate the CPU fan connector on the motherboard.

8. Place the heatsink on the motherboard with the fan’s cable facing towards the fan connector and the fasteners matching the holes on the motherboard.

9. Push down the heatsink until the four fasteners get wedged into the holes on the motherboard. Press the four fasteners down to fasten the heatsink. As each fastener locks into position a click should be heard.

0. Inspect the motherboard to ensure that the fastener-ends have been properly

locked in place.

. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

English

Important

Con󰘰rm that the CPU heatsink has formed a tight seal with the CPU before booting

•

your system. Whenever the CPU is not installed, always protect the CPU socket pins by

•

covering the socket with the plastic cap. If you purchased a separate CPU and heatsink/ cooler, Please refer to the

•

documentation in the heatsink/ cooler package for more details about installation.

7

Memory Installation

Video Demonstration

Watch the video to learn how to install memories at the address below.

http://youtu.be/76yLtJaKlCQ

English



Important

DDR3 memory modules are not interchangeable with DDR2, and the DDR3

•

standard is not backward compatible. Always install DDR3 memory modules in DDR3 DIMM slots.

To ensure system stability, memory modules must be of the same type and density

•

in Dual-Channel mode.

8

Internal Connectors

13. +3. 3

1.+ 3.3

14. -12 V

2.+ 3.3

15. Gro und

.Gr oun d

16. PS- ON

4.+ 5 V

17. Gro und

.Gr oun d

18. Gro und

6.+ 5 V

19. Gro und

.Gr oun d

22. +5 V

10. +12 V

20. Res

8.P W R O

23. +5 V

.+1 2V

21. +5 V

9.5 VSB

24. Gro und

12. +3. 3

4.+ 12V

.Gr ound

3.+ 12V

.Gr ound

JPWR~2: ATX Power Connectors

These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and 󰘰rmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector.

Video Demonstration

Watch the video to learn how to install power supply connectors.

http://youtu.be/gkDYyR_83I4

English

JPWR

JPWR2

Important

Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

JCOM2: Serial Port Connector

This connector is a 6550A high speed communication port that sends/receives 6 bytes FIFOs. You can attach a serial device.

9

SATA~4: SATA Connectors

This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray).

English

Video Demonstration

Watch the video to learn how to Install SATA HDD.

http://youtu.be/RZsMpqxythc

Important

Many SATA devices also need a power cable from the power supply. Such devices

•

include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD / Blu-Ray). Please refer to the device’s manual for further information.

Many computer cases also require that large SATA devices, such as HDDs, SSDs,

•

and optical drives, be screwed down into the case. Refer to the manual that came with your computer case or your SATA device for further installation instructions.

Please do not fold the SATA cable at a 90-degree angle. Data loss may result

•

during transmission otherwise. SATA cables have identical plugs on either sides of the cable. However, it is

•

recommended that the 󰘱at connector be connected to the motherboard for space saving purposes.

JCI: Chassis Intrusion Connector

This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will 󰘱ash on screen. To clear the warning, you must enter the BIOS utility and clear the record.

CPUFAN,SYSFAN~2: Fan Power Connectors

.Gr oun d

2.+ 12V

3.S ens

4.S pee d

ont ro

.Gr oun d

2.+ 12V

3.N o Us

1.M I C L

3.M I C R

10. Hea d

hon e

Det ect ion

5.H ead

hon e

7.S ENS E_S EN

9.H ead

hon e

8.N o Pi

6.M I C D

ete cti on

4.N C

.Gr oun d

The fan power connectors support system cooling fans with +2V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector.

CPUFAN/ SYSFAN SYSFAN2

Important

Please refer to your processor’s o󰘲cial website or consult your vendor to 󰘰nd

•

recommended CPU heatsink. These connectors support Smart Fan Control with liner mode. The Command

•

Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.

If there are not enough ports on the motherboard to connect all system fans,

•

adapters are available to connect a fan directly to a power supply. Before 󰘰rst boot up, ensure that there are no cables impeding any fan blades.

•

JAUD: Front Panel Audio Connector

This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide.

2

English

JFP, JFP2: System Panel Connectors

3.S pea ker

4.V CC5

1.S pea ker

2.V CC5

1. +

10. No

5.-

Res et

wit ch

HDD

owe r

Swi tch

owe r

7. +

9.R ese rve

6. +

2. +

These connectors connect to the front panel switches and LEDs. The JFP connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard.

English

Video Demonstration

Watch the video to learn how to Install front panel connectors.

http://youtu.be/DPELIdVNZUI

JFP

JFP2

Important

On the connectors coming from the case, pins marked by small triangles are

•

positive wires. Please use the diagrams above and the writing on the optional MConnectors to determine correct connector orientation and placement.

The majority of the computer case’s front panel connectors will primarily be

•

plugged into JFP.

JUSB~2: USB 2.0 Expansion Connectors

This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others.

Important

Note that the VCC and GND pins must be connected correctly to avoid possible damage.

JUSB3: USB 3.0 Expansion Connector

SB3 _TX_ C_D N

.Gr ound

3.U SB3_ RX_ DP

2.U SB3_ RX_ DN

1.P ower

10. Grou nd

SB2 .0

.Gr ound

6.U SB3_ TX_ C_DP

20. No

19. Powe r

18. USB3 _RX _DN

17. USB3 _RX _DP

16. Grou nd

15. USB3 _TX _C_D N

14. USB3 _TX _C_D P

13. Grou nd

12. USB2 .0

. +

SB2 .0

10. No

14. Groun d

8.5 V P

owe r

12. Groun d

6.S erial

4.3 .3V

owe r

2.3 V Sta ndby

pow er

1.L P C C

loc

3.L P C

Res e

5.L P C a

ddr es

s &

dat a

pin 0

7.L P C a

ddr es

s &

dat a

in1

9.L P C a

ddr es

s &

dat a

in2

.LP C

ddr es

s &

dat a

in3

13. LP C

Fra m

The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed).

Important

Note that the VCC and GND pins must be connected correctly to avoid possible

•

damage. To use a USB 3.0 device, you must connect the device to a USB 3.0 port through

•

an optional USB 3.0 compliant cable.

JTPM: TPM Module Connector

This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

English

JBAT: Clear CMOS Jumper

There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system con󰘰guration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system con󰘰guration, set the jumpers to clear the CMOS RAM.

English



Keep Data Clear Data



Important

You can clear the CMOS RAM by shorting this jumper while the system is o󰘯. Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on because it will damage the motherboard.

JUSB_PW, JUSB_PW2: USB Power Jumper

This jumper allows you to enable/ disable the “Wakeup from S3/S4/S5 by USB and PS/2 device” function.

JUSB_PW



Enabled Disabled (Default)



JUSB_PW2



Enabled Disabled (Default)



Important

If you set the jumper to Enabled, the power supply must be able to provide at least 2A currents.

PCI_E~2: PCIe Expansion Slots

The PCIe slot supports the PCIe interface expansion card.

PCIe x6 Slot

PCIe x Slot

PCI~2: PCI Expansion Slots

The PCI slot supports the PCI interface expansion card..

PCI Slot

Important

When adding or removing expansion cards, always turn o󰘯 the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

English

BIOS Setup

The default settings o󰘯er the optimal performance for system stability in normal conditions. You may need to run the Setup program when:

An error message appears on the screen during the system booting up, and

■

requests you to run SETUP.

English

You want to change the default settings for customized features.

■

Important

Please load the default settings to restore the optimal system performance and

•

stability if the system becomes unstable after changing BIOS settings. Select the "Restore Defaults" and press <Enter> in BIOS to load the default settings.

If you are unfamiliar with the BIOS settings, we recommend that you keep the

•

default settings to avoid possible system damage or failure booting due to inappropriate BIOS con󰘰guration.

Entering BIOS Setup

Power on the computer and the system will start the Power On Self Test (POST) process. When the message below appears on the screen, please <DEL> key to enter BIOS:

Press DEL key to enter Setup Menu, F to enter Boot Menu

If the message disappears before you respond and you still need to enter BIOS, restart the system by turning the computer OFF then back ON or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

MSI additionally provides two methods to enter the BIOS setup. You can click the “GO2BIOS” tab on “MSI Fast Boot” utility screen or press the physical “GO2BIOS" button (optional) on the motherboard to enable the system going to BIOS setup directly at next boot.

Click "GO2BIOS" tab on "MSI Fast Boot" utility screen.

Important

Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS setup.

Overview

After entering BIOS, the following screen is displayed.

Model name

Virtual OC Genie Button

BIOS menu selection

Temperature monitor

Menu display

OC Menu

Language

System information

Boot device priority bar

BIOS menu selection

English

Important

Overclocking your PC manually is only recommended for advanced users.

•

Overclocking is not guaranteed, and if done improperly, can void your warranty or

•

severely damage your hardware. If you are unfamiliar with overclocking, we advise you to use OC Genie for easy

•

overclocking.

Current CPU/ DRAM/ Ring Frequency

▶ These items show the current frequencies of installed CPU, Memory and Ring.

Read-only.

CPU Ratio Mode [Auto]

▶ Selects the CPU Ratio operating mode. [Auto] This setting will be con󰘰gured automatically by BIOS.

English

[Fixed Mode] Fixes the CPU ratio. [Dynamic Mode] CPU ratio will be changed dynamically according to the CPU

Adjust CPU Ratio [Auto]

▶ Sets the CPU ratio that is used to determine CPU clock speed. This item can only be

changed if the processor supports this function.

Adjusted CPU Frequency

▶ Shows the adjusted CPU frequency. Read-only.

EIST [Enabled]

▶ Enables or disables the Enhanced Intel® SpeedStep Technology.

▶

Intel Turbo Boost [Enabled]

Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU supports this function.

[Enabled] Enables this function to boost CPU performance automatically

[Disabled] Disables this function.

▶

Enhanced Turbo [Auto]

Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance.

[Auto] This setting will be con󰘰gured automatically by BIOS. [Enabled] All CPU cores would be increased to maximum turbo ratio. [Disabled] Disables this function.

Adjust Ring Ratio [Auto]

▶ Sets the ring ratio. The valid value range depends on the installed CPU.

▶

Adjusted Ring Frequency

Shows the adjusted Ring frequency. Read-only.

▶

Adjust GT Ratio [Auto]

Sets the integrated graphics ratio. The valid value range depends on the installed CPU.

▶

Adjusted GT Frequency

Shows the adjusted integrated graphics frequency. Read-only.

▶

DRAM Frequency [Auto]

Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

above rated speci󰘰cations when system request the highest performance state.

Adjusted DRAM Frequency

▶ Shows the adjusted DRAM frequency. Read-only.

▶

DRAM Timing Mode [Auto] Selects the memory timing mode. [Auto] DRAM timings will be determined based on SPD (Serial Presence

[Link] Allows user to con󰘰gure the DRAM timing manually for all memory

[UnLink] Allows user to con󰘰gure the DRAM timing manually for respective

▶

Advanced DRAM Con󰘰guration Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting

[Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each memory channel. The system may become unstable or unbootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)

Memory Fast Boot [Auto]

▶ Enables or disables the initiation and training for memory every booting. [Auto] This setting will be con󰘰gured automatically by BIOS. [Enabled] Memory will completely imitate the archive of 󰘰rst initiation and

[Disabled] The memory will be initialed and trained every booting.

▶

DRAM Voltage [Auto] Sets the memory voltage. If set to "Auto", BIOS will set memory voltage

automatically or you can set it manually.

▶

Spread Spectrum This function reduces the EMI (Electromagnetic Interference) generated by

modulating clock generator pulses. [Enabled] Enables the spread spectrum function to reduce the EMI

[Disabled] Enhances the overclocking ability of CPU Base clock.

Detect) of installed memory modules.

channel.

memory channel.

󰘰rst training. After that, the memory will not be initialed and trained when booting to accelerate the system booting time.

(Electromagnetic Interference) problem.

English

Important

•

If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you are plagued by EMI, select the value of Spread Spectrum for EMI reduction.

•

The greater the Spread Spectrum value is, the greater the EMI is reduced, and the system will become less stable. For the most suitable Spread Spectrum value, please consult your local EMI regulation.

•

Remember to disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause

your overclocked processor to lock up.

CPU Features

▶ Press <Enter> to enter the sub-menu.

Hyper-Threading Technology [Enabled]

▶ The processor uses Hyper-Threading technology to increase transaction rates

English

and reduces end-user response times. Intel Hyper-Threading technology treats the multi cores inside the processor as multi logical processors that can execute instructions simultaneously. In this way, the system performance is highly improved.

[Enable] Enables Intel Hyper-Threading technology. [Disabled] Disables this item if the system does not support HT function.

Active Processor Cores [All]

▶ This item allows you to select the number of active processor cores.

Limit CPUID Maximum [Disabled]

▶ Enables or disables the extended CPUID value. [Enabled] BIOS will limit the maximum CPUID input value to circumvent

[Disabled] Use the actual maximum CPUID input value.

Execute Disable Bit [Enabled]

▶ Intel’s Execute Disable Bit functionality can prevent certain classes of malicious

“bu󰘯er over󰘱ow” attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always.

[Enabled] Enables NO-Execution protection to prevent the malicious

[Disabled] Disables this function.

Intel Virtualization Tech [Enabled]

▶ Enables or disables Intel Virtualization technology. [Enabled] Enables Intel Virtualization technology and allows a platform

[Disabled] Disables this function.

Hardware Prefetcher [Enabled]

▶ Enables or disables the hardware prefetcher (MLC Streamer prefetcher). [Enabled] Allows the hardware prefetcher to automatically pre-fetch

[Disabled] Disables the hardware prefetcher.

boot problems with older operating system that do not support the processor with extended CPUID value.

attacks and worms.

to run multiple operating systems in independent partitions. The system can function as multiple systems virtually.

data and instructions into L2 cache from memory for tuning the CPU performance.

+ 156 hidden pages