Copyright Notice
The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks in this manual are properties of their respective owners.
MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA® is registered trademark of NVIDIA Corporation.
ATI® is registered trademark of AMD Corporation.
AMD® is registered trademarks of AMD Corporation.
Intel® is registered trademarks of Intel Corporation.
Windows® is registered trademarks of Microsoft Corporation.
AMI® is registered trademark of American Megatrends Inc.
Award® is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster® is registered trademark of Creative Technology Ltd.
Realtek® is registered trademark of Realtek Semiconductor Corporation.
JMicron® is registered trademark of JMicron Technology Corporation.
Netware® is registered trademark of Novell, Inc.
Lucid® is trademark of LucidLogix Technologies, Ltd.
VIA® is registered trademark of VIA Technologies, Inc.
ASMedia® is registered trademark of ASMedia Technology Inc.
iPad, iPhone, and iPod are trademarks of Apple Inc.
Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.
Revision |
History |
|
Revision |
Revision History |
Date |
V5.0 |
First release for PCB 5.X |
2013/10 |
G52-77211XP
Preface
Safety Instructions
Preface |
Always read the safety instructions carefully. |
|
|
Keep this User’s Manual for future reference. |
|
|
Keep this equipment away from humidity. |
|
|
Lay this equipment on a reliable flat surface before setting it up. |
|
|
The openings on the enclosure are for air convection hence protects the |
|
|
|
equipment from overheating. DO NOT COVER THE OPENINGS. |
|
Make sure the voltage of the power source is at 110/220V before connecting the |
|
|
|
equipment to the power inlet. |
|
Place the power cord such a way that people can not step on it. Do not place |
|
|
|
anything over the power cord. |
|
Always Unplug the Power Cord before inserting any add-on card or module. |
|
|
All cautions and warnings on the equipment should be noted. |
|
|
Never pour any liquid into the opening that can cause damage or cause electrical |
|
|
|
shock. |
|
If any of the following situations arises, get the equipment checked by service |
|
|
|
personnel: |
|
|
The power cord or plug is damaged. |
|
|
Liquid has penetrated into the equipment. |
|
|
The equipment has been exposed to moisture. |
|
|
The equipment does not work well or you can not get it work according to |
|
|
User’s Manual. |
|
|
The equipment has been dropped and damaged. |
|
|
The equipment has obvious sign of breakage. |
|
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60oC |
|
|
|
(140oF), IT MAY DAMAGE THE EQUIPMENT. |
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Taiwan:
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
FCC -B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help. Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7721
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
) this device may not cause harmful interference, and
2)this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.
Preface
Preface
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300GHz). This wireless device complies with the R&TTE Directive.
Taiwan Wireless Statements
頻率、加大功率或變更原設計之特性及功能。
無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機 設備之干擾。
:
Japan VCCI Class B Statement
B
VCCIB
Korea Warning Statements
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
< >
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|||||||
|
(Pb) |
(Hg) |
(Cd) |
(Cr6+) |
(PBB) |
(PBDE) |
|
|
|
|
|
|
|
|
|
* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
** |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
: SJ/T11363-2006
: SJ/T113632006 RoHS
* : **
Preface
Preface
WEEE Statement
WEEE (Waste Electrical and Electronic Equipment)
ENGLISH
To protect the global environment and as an environmentalist, MSI must remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektround Elektronik-Altgeräte dürfen Elektround Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammelund Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.
Preface
Preface
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických
výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
Contents
English 11
Motherboard Specifications 12 Back Panel 15 APU & Heatsink Installation 16 Memory Installation 18 Internal Connectors 19 BIOS Setup 27
33
3437 APU 384041 BIOS 49
Français 55
Spécifications 56 Panneau Arrière 59 Installation d'APU et son ventilateur 60 Installation de mémoire 62 Connecteurs internes 63 Configuration BIOS 71
Deutsch 77
Spezifikationen 78 Rücktafel-Übersicht 81 APU & Kühlkörper Einbau 82 Speicher 84 Interne Anschlüsse 85 BIOS Setup 93
Русский 99
Характеристики материнской платы 100 Задняя панель 103 Установка APU и радиатора 104 Установка памяти 106 Внутренние разъемы 107 Настройка BIOS 115
Preface
Preface
121
122125 APU 126128129 BIOS 137
143
144147APU 148150151 BIOS 159
165
166 I/O 169 APU 170172173 BIOS 181
10
Thank you for choosing the A88XM-E45/ A78M-E45/ A55M-E45 Series (MS-7721 v5.X) Micro-ATX motherboard. The A88XM-E45/ A78M-E45/ A55M-E45 Series motherboards are based on AMD A88X/ A78/ A55 chipset for optimal system efficiency. Designed to fit the advanced AMD FM2+/ FM2 processor, the A88XME45/ A78M-E45/ A55M-E45 Series motherboards deliver a high performance and professional desktop platform solution.
Layout
CPUFAN
Top : mouse JPWR2
Bottom: keyboard
Top: USB2.0 ports
Bottom: HDMI port
Top: VGA port |
Bottom: DVI-D port |
USB3.0 ports
Top: LAN Jack
Bottom: USB 3.0or
USB 2.0 ports
M:Line-Out |
|
|
|
|
|
|
|
|
|
|
|
|
|
DIMM1 |
DIMM2 |
DIMM3 |
DIMM4 |
|
|||||||||||
|
(Optional) |
|
|
|
|
|
|
|
|||||||||||||||||||||
T:Line-In |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
B:Mic |
|
|
|
SYSFAN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
T:RS-Out |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
M:CS-Out |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
B:SS-Out |
|
|
PCI_E1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
PCI_E2 |
BAT1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
JCI1 |
|
PCI1 |
JBAT1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SATA2 |
|
|
SATA4 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PCI_E3 SATA1 SATA3
JUSB3(Optional)
JAUD1 |
JCOM1 |
JLPT1 |
JTPM1 |
JUSB2 |
JUSB1 |
JFP1 |
JPWR1 |
SYSFAN1 |
(Optional) |
SATA7 8 |
SATA6 |
SATA5 |
JFP2 |
English
11
English
CPU |
■ AMD Socket FM2+ A-Series/Athlon™ Processors* |
||
Support |
* Also supports FM2 A-Series/Athlon™ Processors |
||
Chipset |
■ AMD A88X/ A78/ A55 |
||
Memory |
■ 4x |
DDR3 memory slots support up to 64GB |
|
Support |
■ Supports DDR3 2133*/ 1866/ 1600/ 1333 MHz |
||
|
■ |
Dual channel memory architecture |
|
|
■ |
Supports non-ECC, un-buffered memory |
|
|
■ Supports AMD Memory Profile (AMP) |
||
|
■ |
Supports Extreme Memory Profile (XMP) |
|
|
* A55M-E45 does not support DDR3 2133 nativity, but supports it |
||
|
|
when overclocking. |
|
Expansion |
■ |
1x |
PCIe 3.0 x16 slot* (PCI_E1 supports up to x16 speed) |
Slots |
■ |
1x |
PCIe 2.0 x16 slot (PCI_E3 supports up to x4 speed) |
|
■ |
1x |
PCIe 2.0 x1 slot |
|
■ |
1x |
PCI slot |
|
* Only FM2+ processors can support PCIe 3.0 |
Graphics |
■ 1x VGA port, supporting a maximum resolution of 1920x1200 |
@ 60Hz, 24bpp
■1x DVI-D port, supporting a maximum resolution of 2560x1600@60Hz, 24bpp/ 1920x1200 @ 60Hz, 24bpp
■1x HDMI port, supporting a maximum resolution of 4096x2160@24Hz, 36bpp*/ 3840x2160@30Hz, 36bpp*/ 1920x1200@120Hz, 36bpp and 1920x1200@60Hz, 36bpp
* Only be supportted when using an FM2+ processors
Storage |
■ AMD A88X Chipset (A88XM-E45) |
-8x SATA 6Gb/s ports
-Supports RAID 0, RAID1, RAID 5 and RAID 10
■AMD A78 Chipset (A78M-E45)
-6x SATA 6Gb/s ports
-Supports RAID 0, RAID1 and RAID 10
■AMD A55 Chipset (A55M-E45)
-6x SATA 3Gb/s ports
-Supports RAID 0, RAID1 and RAID 10
12
USB |
■ A88XM-E45/ A78M-E45 |
-6x USB 3.0 ports (4 ports on the back panel by RENESAS UPD720202 & AMD A88X/ A78 chipset, 2 ports available through the internal USB 3.0 connector by AMD A88X/ A78 Chipset)
-6x USB 2.0 ports by AMD A88X/ A78 Chipset (2 ports on the back panel, 4 ports available through the internal USB 2.0 connectors)
■A55M-E45
-2x USB3.0 ports on the back panel by RENESAS UPD720202 Chipset
-8x USB 2.0 ports by AMD A55 Chipset (4 ports on the back panel, 4 ports available through the internal USB 2.0 connectors)
Audio |
■ Realtek® ALC887 Codec |
||
|
|
- 7.1-Channel High Definition Audio |
|
LAN |
■ |
Realtek® RTL8111G Gigabit LAN controller |
|
Back Panel |
■ |
1x |
PS/2 keyboard port |
Connectors |
■ |
1x |
PS/2 mouse port |
■2x USB 2.0 ports, 4x USB 3.0 ports (A88XM-E45/ A78M-E45)
■4x USB 2.0 ports, 2x USB 3.0 ports (A55M-E45)
■1x VGA port
■1x DVI-D port
■1x HDMI port
■1x LAN (RJ45) port
■6x audio jacks
English
13
English
Internal |
■ |
1x |
24-pin ATX main power connector |
Connectors |
■ |
1x |
4-pin ATX 12V power connector |
■8x SATA 6Gb/s connectors (A88XM-E45)
■6x SATA 6Gb/s connectors (A78M-E45)
■6x SATA 3Gb/s connectors (A55M-E45)
■2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
■1x USB 3.0 connector (supports additional 2 USB 3.0 ports) (A88XM-E45/ A78M-E45)
■1x 4-pin CPU fan connector
■1x 4-pin system fan connector
■1x 3-pin system fan connector
■1x Front panel audio connector
■2x System panel connectors
■1x Chassis Intrusion connector
■1x TPM module connector
■1x Serial port connector
■1x Parallel port connector
■1x Clear CMOS jumper
BIOS |
■ 64 Mb flash |
|
Features |
■ UEFI AMI BIOS |
|
|
■ ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0 |
|
|
■ |
Multi-language |
Form Factor |
■ |
Micro-ATX Form Factor |
|
■ |
9.6 in. x 9.6 in. (24.3 cm x 24.3 cm) |
For the latest information about CPU, please visit
http://www.msi.com/service/cpu-support/
For more information on compatible components, please visit http://www.msi.com/service/test-report/
14
A88XM-E45/ A78M-E45 |
|
|
|
|
||
PS/2 Mouse |
USB 2.0 |
VGA |
|
LAN |
|
|
|
|
|
|
|
||
|
|
|
USB 3.0 |
Line-In |
RS_Out |
English |
|
|
|
|
|
||
|
|
|
|
Line-Out CS_Out |
||
|
|
|
|
|
|
|
|
|
|
|
Mic |
SS_Out |
|
PS/2 Keyboard |
HDMI |
DVI-D |
|
USB 3.0 |
|
|
|
|
® |
|
|
|
|
A55M-E45 |
|
|
|
|
|
|
PS/2 Mouse |
USB 2.0 |
VGA |
|
LAN |
|
|
|
|
|
|
|
USB 3.0 |
Line-In |
RS_Out |
|
|
|
|
Line-Out CS_Out |
|
|
Mic |
SS_Out |
PS/2 Keyboard HDMI |
DVI-D |
USB 2.0 |
|
® |
|
LAN LED Indicator
LINK/ACT |
SPEED |
|
LED |
LED |
|
LED |
LED Status |
Description |
|
Off |
No link |
Link/ Activity LED |
Yellow |
Linked |
|
Blinking |
Data activity |
|
Off |
10 Mbps connection |
Speed LED |
Green |
100 Mbps connection |
|
Orange |
1 Gbps connection |
15
When installing a APU, always remember to install a APU heatsink. An APU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct APU and heatsink installation. Wrong installation can damage both the APU and the motherboard.
English |
1. |
Pull the lever sideways away from the socket. Make sure to raise the lever up to |
|
|
a 90-degree angle. |
|
2. |
Look for the gold arrow of the APU. The gold arrow should point as shown in the |
|
|
picture. The APU can only fit in the correct orientation. |
3.If the APU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your motherboard.
4.Press the APU down firmly into the socket and close the lever. As the APU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the APU to make sure the APU is properly and completely embedded into the socket.
16
5.Locate the APU fan connector on the motherboard.
6.Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first.
7.Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it.
8.Fasten down the lever.
English
9.Attach the APU Fan cable to the APU fan connector on the motherboard.
Important
•While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an eye on your fingers, because once the Safety Hook is disconnected from the fixed bolt, the fixed lever will spring back instantly.
•Confirm that the APU cooler has formed a tight seal with the APU before booting your system.
•Please refer to the documentation in the APU cooler package for more details about APU cooler installation.
17
English
Video Demonstration
Watch the video to learn how to install memories at the address below. http://youtu.be/76yLtJaKlCQ
1
2
3
Important
•DDR3 memory modules are not interchangeable with DDR2, and the DDR3 standard is not backward compatible. Always install DDR3 memory modules in DDR3 DIMM slots.
•To ensure system stability, memory modules must be of the same type and density in Dual-Channel mode.
18
JPWR1~2: ATX Power Connectors
These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector.
Video Demonstration
Watch the video to learn how to install power supply connectors. http://youtu.be/gkDYyR_83I4
|
|
|
|
|
12. |
|
|
|
|
|
|
|
|
11 |
. +3 |
. |
|
|
|
|
|
910. |
||||
|
|
|
|
7 |
. |
+12V |
3V |
|
|
|
|
|
8 |
|
|
||
|
|
|
6 . |
|
|
|
|
|
|
5 . |
|
|
|
|
|||
1 |
4 |
|
. +5 |
|
|
|
|
|
3 . |
Ground |
|
|
|
|
|||
2 . +5 |
|
|
|
|
|
|||
+3.Ground |
|
|
|
|
||||
|
. |
|
|
V |
|
|
|
|
. +3. |
|
|
|
|
|
|
||
|
3 |
|
|
|
|
|
|
|
|
3 |
V |
|
|
|
|
|
|
|
V |
|
|
|
|
|
|
JPWR1 |
. |
- |
|
|
|
+3.Ground |
|
||
|
13. |
- |
ON |
# |
|
|
12V |
|
|
|
|
3 |
|
|
|
|
V |
|
|
24. |
||
23. |
|
|
|
Ground |
|
. +5 |
V |
|
+5 |
|
|
+5 |
V |
|
V |
|
|
|
1 |
|
. |
2 |
Ground |
. |
|
Ground |
JPWR2
|
3 |
|
. |
4 |
+12V |
. |
|
+12V |
Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
JCOM1: Serial Port Connector
This connector is a 16550A high speed communication port that sends/receives 16 bytes FIFOs. You can attach a serial device.
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
0 |
|
|
|
|
|
|
|
|
8 . |
|
|
||||
|
|
6 |
|
. N |
|
|||||
|
|
|
|
C |
|
o |
||||
|
4 |
. |
|
|
T |
|
P |
|||
|
|
D |
|
|
S |
i |
||||
2 |
|
. |
|
|
S |
|
|
|
n |
|
|
D |
|
|
R |
|
|
|
|||
. |
|
T |
|
|
|
|
|
|
||
S |
|
R |
|
|
|
|
|
|||
|
|
I |
|
|
|
|
|
|
||
|
|
N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
|
||
|
|
|
|
|
7 |
|
. |
|
|||
|
|
|
|
|
|
|
R |
||||
|
|
|
5 |
|
|
. |
|
|
I |
||
|
|
|
|
|
|
R |
|
|
|||
|
3 |
|
. |
|
|
T |
|
||||
|
|
|
G |
|
|
S |
|||||
1 |
|
. |
|
|
|
r |
|
||||
|
|
S |
|
|
|
o |
|
|
|||
. |
|
|
O |
|
|
u |
|
||||
D |
|
|
|
U |
|
n |
|||||
|
|
C |
|
|
|
|
d |
||||
|
|
|
|
|
|
T |
|
|
|||
|
|
|
D |
|
|
|
|
|
|
English
19
English
SATA1~8: SATA Connectors
This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray).
Video Demonstration
Watch the video to learn how to Install SATA HDD. http://youtu.be/RZsMpqxythc
SATA6
SATA4
SATA2 |
|
|
|
A88XM-E45/ A78M-E45 - SATA1~6 (6Gb/s) |
|
1 |
A55M-E45 - SATA1~6 (3Gb/s) |
|
SATA8 |
A88XM-E45 - SATA7~8 (6Gb/s) |
|
SATA7 |
||
|
Important
•Many SATA devices also need a power cable from the power supply. Such devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD / DVD / Blu-Ray). Please refer to the device’s manual for further information.
•Many computer cases also require that large SATA devices, such as HDDs, SSDs, and optical drives, be screwed down into the case. Refer to the manual that came with your computer case or your SATA device for further installation instructions.
•Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.
•SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
20
JCI1: Chassis Intrusion Connector
This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will flash on screen. To clear the warning, you must enter the BIOS utility and clear the record.
|
1 |
|
|
. |
|
2 |
CHASSI |
|
. |
|
|
GN |
|
|
|
D |
S |
|
|
CPUFAN,SYSFAN1~2: Fan Power Connectors
The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector.
CPUFAN/ SYSFAN1
|
1 |
|
2 . |
||
|
+12VGround |
|
3 . |
|
|
4 . |
|
|
Sens |
|
|
. |
|
|
Speed |
e |
|
|
|
C |
|
|
ontrol |
SYSFAN2
1 . 2 . Ground 3 +12V . No Use
Important
•Please refer to your processor’s official website or consult your vendor to find recommended CPU heatsink.
•These connectors support Smart Fan Control with liner mode. The Command Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.
•If there are not enough ports on the motherboard to connect all system fans, adapters are available to connect a fan directly to a power supply.
•Before first boot up, ensure that there are no cables impeding any fan blades.
English
21
English
JAUD1: Front Panel Audio Connector
This connector allows you to connect the front audio panel located on your computer case.
|
|
|
10. |
|
|
|
|
4 |
|
8 |
|
|
|
|
. NoHead |
|
|
|||
|
|
6 |
. |
|
|
|
|
|
|
Pi |
P |
|
|
|
. MI |
|
||||
2 |
NC |
D |
hone |
|
||
|
|
|
C n |
|
|
|
. |
|
|
|
|
|
|
Ground |
etection |
Detection |
||||
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
3 . |
. |
|
|
|
|
|||
|
|
Head |
|
|
|
|
|||
|
|
|
7 |
|
|
|
|
|
|
|
|
5 . |
|
|
|
|
|
||
. MIHeadSENSE |
P |
|
|
|
|||||
|
. |
|
R |
|
|
|
|
||
1 |
|
|
|
P |
hone |
|
|||
MI |
|
C |
|
_ |
|
|
|
||
|
|
L |
|
|
SEN |
|
L |
||
|
|
C |
|
|
hone |
|
|
||
|
|
|
|
|
R |
D |
JFP1, JFP2: System Panel Connectors
These connectors connect to the front panel switches and LEDs. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard.
Video Demonstration
Watch the video to learn how to Install front panel connectors. http://youtu.be/DPELIdVNZUI
|
P |
|
|
|
|
|
|
|
P |
ower |
S |
10. |
|
|
|||
|
|
|
|
|||||
ower |
LE |
witch |
|
|
No |
|
||
|
|
|
|
|
8Pi |
|||
|
|
|
D |
|
|
6 |
. n |
|
|
|
|
|
|
|
- |
||
|
|
|
4 |
. |
|
|
||
|
|
|
+ |
|
||||
|
|
|
2 |
. |
|
|
||
|
|
|
|
- |
|
|
||
|
|
|
. |
|
|
|
|
|
|
|
|
+ |
|
|
|
|
JFP1
|
|
|
|
|
|
|
9 |
|
|
|
|
||
1 |
|
|
|
|
|
|
|
. |
|
|
|
|
|
|
|
|
7 |
|
|
Reserve |
|
||||||
|
|
|
5 |
|
. |
|
|
|
|
|
|
||
|
|
|
|
|
+ |
|
|
|
|
|
|||
|
3 |
. |
|
|
|
|
|
|
|
|
|
||
|
|
- |
|
|
|
|
|
|
|
|
|||
|
|
. |
|
|
|
|
|
|
|
|
|
|
|
. |
- |
|
|
|
|
|
Reset |
|
d |
||||
+ |
|
|
|
|
|
|
|
|
|||||
|
|
HDD |
|
|
|
|
|||||||
|
|
|
|
|
LE |
|
S |
||||||
|
|
|
|
|
|
|
|
|
|
D |
|
witch |
JFP2
|
|
|
|
4 |
|
1 |
|
|
|
|
. |
|
3 |
|
VCC5 |
||
|
|
|
. |
|
|
|
VCC5Speaker |
||||
|
2 |
|
|
|
|
|
. |
|
|
|
|
. |
|
|
|
|
|
Speaker |
Important
•On the connectors coming from the case, pins marked by small triangles are positive wires. Please use the diagrams above and the writing on the optional M- Connectors to determine correct connector orientation and placement.
•The majority of the computer case’s front panel connectors will primarily be plugged into JFP1.
22
JUSB1~2: USB 2.0 Expansion Connectors
This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others.
|
|
|
|
|
|
1 |
|
|
|
|
||
|
|
|
|
|
|
|
|
0 |
|
|
|
|
|
|
|
6 |
8 . |
|
|
||||||
|
|
|
|
|
G NC |
|
||||||
|
|
|
|
. |
. |
r |
|
|
||||
|
4 |
|
|
|
|
|
|
|||||
|
|
|
U |
|
|
o |
|
|
||||
|
|
. |
|
|
S |
|
u |
|
||||
2 |
|
U |
|
|
|
n |
||||||
|
|
|
|
B |
|
|
d |
|||||
. |
|
|
S |
|
|
|
1 |
|
||||
V |
|
|
B |
|
|
+ |
|
|||||
|
|
C |
|
|
|
1 |
|
|
|
|
||
|
|
|
C |
|
|
|
- |
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
||
|
|
|
|
7 |
. |
|
|
|
|||||
|
|
|
|
|
N |
|
|
|
|||||
|
|
5 . |
|
o |
|
|
|||||||
|
|
|
. G |
|
|
P |
|||||||
|
3 |
|
|
U |
|
|
r |
|
i |
||||
|
|
|
|
|
o |
|
|
n |
|||||
1 |
. |
|
|
|
S |
|
u |
|
|
||||
U |
|
|
|
|
B |
|
n |
|
|||||
. |
|
S |
|
|
|
|
|||||||
V |
|
|
|
|
0 |
|
d |
||||||
|
C |
|
|
B |
|
|
+ |
|
|
||||
|
|
|
|
|
0 |
|
|
|
|
|
|||
|
|
C |
|
|
|
- |
|
|
|
|
Important
Note that the VCC and GND pins must be connected correctly to avoid possible damage.
JUSB3: USB 3.0 Expansion Connector (optional)
The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed).
|
|
|
|
|
|
|
|
|
20. |
|
|
|
|||
|
|
|
|
|
|
19. |
|
No |
|
|
|||||
|
|
|
|
|
18. |
|
|
|
|
||||||
|
|
|
|
16. |
|
|
|
Power |
|
||||||
|
|
|
15 |
17 |
. |
USB3 |
|
|
Pi |
n |
|||||
|
13. |
. |
|
USB3 |
|
|
_ |
|
_ |
||||||
|
USB3Ground |
|
RX |
|
|||||||||||
|
|
14. |
|
|
|
|
|
|
_ |
RX |
|
||||
12. |
USB3 |
|
_ |
|
|
C |
|
|
|
||||||
U |
|
Ground |
|
TX |
|
|
|
|
|
|
|||||
11. |
|
USB2 |
|
_ |
TX_ |
|
|
|
|
||||||
|
|
- |
|
|
|
_ |
|
|
|
|
|
|
|||
|
SB2. |
|
|
|
|
C |
|
|
|
|
|
||||
|
|
|
|
. |
|
|
|
|
|
|
|
|
|
||
|
|
|
0 |
0 |
|
|
|
|
|
_ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DP |
|
|
|||
|
|
|
|
+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. Power |
|
||||||
|
|
|
|
|
|
|
|
USB3 |
_ |
|
|||||
|
|
|
|
|
|
|
|
USB3 |
|
|
_ |
||||
|
|
|
|
|
|
SB3Ground |
|
RX |
|
||||||
|
|
|
USB3 |
|
|
|
_ |
|
RX |
DN |
|||||
|
|
|
|
TX |
|
|
|
|
|
|
|||||
|
. |
Ground |
|
|
|
|
|
|
_ |
|
|||||
|
|
|
|
|
|
|
_ |
|
|
|
|
|
|||
. |
U |
|
|
|
|
_ TX |
|
C |
|
DP |
|||||
|
SB2 |
|
|
|
|
|
|
|
|
|
|||||
|
SB2 |
|
|
0 |
|
|
|
_ |
_ |
|
|||||
|
|
|
|
|
C |
|
|
||||||||
Ground |
|
. |
|
|
|
_ |
|
|
|
||||||
|
|
- |
|
|
_ |
|
DN |
|
|||||||
|
|
|
0 |
|
|
|
|
|
|||||||
|
|
|
. |
+ |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
DP |
|
|
Important
•Note that the VCC and GND pins must be connected correctly to avoid possible damage.
•To use a USB 3.0 device, you must connect the device to a USB 3.0 port through an optional USB 3.0 compliant cable.
English
23
English
JTPM1:TPM Module Connector
This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.
|
|
|
|
|
|
|
14. |
|
|
|
|
|
|
12. |
|||
|
|
6 . |
No Ground |
|||||
4 |
|
|
10. |
GroundPi |
||||
|
. |
5V |
|
|
||||
. |
|
|
|
8 |
|
|
|
|
|
|
|
Serial |
|
|
|||
|
. |
3V |
|
P n |
||||
|
|
|
|
|
|
ower |
||
|
3 |
|
|
|
|
|
||
2 . |
|
|
IRQ |
|||||
3V |
|
|
|
P |
|
|||
|
|
Standby |
|
|||||
|
|
|
|
|
ower |
|||
|
|
|
|
|
|
|
|
p |
|
|
|
|
|
|
|
|
ower |
|
|
|
|
|
|
13. |
|
|
|
|
|
|
|
|
|
|
||
|
|
5 |
|
911 |
. LP |
|
|
|
|
|
|
|
|
|
||||
|
|
. LP LPC |
C |
|
|
|
|
|
|
|
||||||||
|
3 |
|
7 . |
|
a |
|
|
|
|
|
|
|
|
|||||
|
. LP |
|
|
|
a |
Fram |
|
|
|
|
||||||||
|
|
|
C |
|
|
|
|
|
|
|
|
|
||||||
|
. LP |
|
a |
|
|
|
|
|
ddres |
|
e |
|
|
|
||||
LP |
|
C |
C |
|
|
|
ddres |
|
s |
|
|
|
||||||
. LP |
|
|
a |
|
|
|
|
|
|
|
|
|
|
|
|
|||
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
ddres |
|
|
|
|
|
|
|
|
||||
|
|
C |
|
ddres |
s |
|
& |
|
|
|
|
|
||||||
|
|
|
|
Reset |
|
|
|
& |
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
s |
|
|
|
||
|
|
|
loc |
|
|
|
|
|
|
s & |
|
|
data |
|
||||
|
|
|
k |
|
|
|
|
& |
|
|
|
|
p |
|||||
|
|
|
|
|
|
|
|
|
|
|
data |
p |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
data |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
data |
|
|
p in2 in3 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
p in1 |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
in0 |
|
|
JLPT1: Parallel Port Header
This connector is used to connect an optional parallel port bracket. The parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 . |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 . |
|
|
o |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
G |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
. |
|
|
r P |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
0 |
|
|
G |
|
|
o |
|
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
|
r |
|
u |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
8 |
|
|
G |
|
|
|
o |
|
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
|
r |
|
|
u |
|
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
|
G |
|
|
|
|
o |
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
1 |
|
|
. |
|
|
r |
|
|
u |
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
1 |
|
4 |
|
|
G |
|
|
|
|
u |
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
. |
|
|
r |
|
|
|
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
1 |
|
2 |
|
G |
|
|
o |
|
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
. |
|
|
r |
|
|
u |
|
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
. G |
|
|
o |
|
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
8 |
0 |
|
|
|
r |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
G |
|
|
u |
|
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
. |
|
|
|
o |
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
6 |
|
|
L |
|
r |
|
|
u |
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
o |
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
. |
|
|
P |
|
|
u |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
4 |
|
|
P |
|
|
|
T |
|
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
I |
|
|
|
n |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|||||||||
|
. |
|
|
|
N |
|
|
_ |
|
|
d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
2 |
|
E |
|
|
|
|
|
S |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|||||||||
. |
|
R |
|
|
|
T |
|
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 . |
|
|
|||||||||||
A |
|
|
R |
|
|
# |
|
I |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
3 |
|
|
S |
|
|||||||||||
|
F |
|
|
|
# |
|
|
|
|
|
|
N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
L |
||||||||
|
|
D |
|
|
|
|
|
|
|
|
|
|
|
# |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
1 |
|
|
|
P |
|
|
C |
||||||||
|
|
|
# |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
|
E |
|
T |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
|
|
B |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 . |
|
|
|
U |
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 |
|
|
A |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 . |
|
|
C |
|
|
S |
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
5 |
|
|
P |
|
|
|
K |
|
|
Y |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
|
R |
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
P |
|
|
|
N |
|
|
# |
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 . |
|
|
|
R |
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
1 |
|
P |
|
|
|
|
N |
|
D |
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
R |
|
|
|
|
|
7 |
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 |
|
. |
|
|
P |
|
|
|
N |
|
|
D |
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
R |
|
|
|
|
D |
|
6 |
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
. |
|
R |
|
|
N |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
N |
|
|
D |
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
. |
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
D |
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
|
R N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
P |
|
|
|
N |
|
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
R |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
N |
|
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S |
|
|
|
D |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T |
|
|
|
|
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24
JBAT1: Clear CMOS Jumper
There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM.
1 |
1 |
Keep Data |
Clear Data |
Important
You can clear the CMOS RAM by shorting this jumper while the system is off. Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on because it will damage the motherboard.
English
25
PCI_E1~E3: PCIe Expansion Slots
The PCIe slot supports the PCIe interface expansion card.
PCIe 3.0 x16 Slot
English
PCIe 2.0 x16 Slot
PCIe x1 Slot
PCI1: PCI Expansion Slot
The PCI slot supports the PCI interface expansion card..
PCI Slot
Important
When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.
26
The default settings offer the optimal performance for system stability in normal conditions. You may need to run the Setup program when:
■An error message appears on the screen during the system booting up, and requests you to run SETUP.
■You want to change the default settings for customized features.
Important
•Please load the default settings to restore the optimal system performance and stability if the system becomes unstable after changing BIOS settings. Select the "Restore Defaults" and press <Enter> in BIOS to load the default settings.
•If you are unfamiliar with the BIOS settings, we recommend that you keep the default settings to avoid possible system damage or failure booting due to inappropriate BIOS configuration.
Entering BIOS Setup
Power on the computer and the system will start the Power On Self Test (POST) process. When the message below appears on the screen, please <DEL> key to enter BIOS:
Press DEL key to enter Setup Menu, F11 to enter Boot Menu
If the message disappears before you respond and you still need to enter BIOS, restart the system by turning the computer OFF then back ON or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
MSI additionally provides a method to enter the BIOS setup. You can click the “GO2BIOS” tab on “MSI Fast Boot” utility screen to enable the system going to BIOS setup directly at next boot.
Click "GO2BIOS" tab on "MSI Fast
Boot" utility screen.
Important
Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS setup.
English
27
English
Overview
After entering BIOS, the following screen is displayed.
|
|
|
|
Temperature monitor |
Language |
|
|
System |
|||||||||||||||
Model name |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
information |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
Virtual OC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Genie Button |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boot device |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
priority bar |
||||
BIOS menu |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
selection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BIOS |
|
menu |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
selection |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Menu display
OC Menu
Important
•Overclocking your PC manually is only recommended for advanced users.
•Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware.
•If you are unfamiliar with overclocking, we advise you to use OC Genie for easy overclocking.
28
Current CPU/ DRAM Frequency
These items show the current frequencies of installed CPU and Memory. Read-only.
CPU Base Frequency (MHz) [Default]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please note that overclocking behavior and stability is not guaranteed. This item appears when the installed processor supports this function.
Adjust CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.
Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Ratio [Auto]
Sets the CPU-NB ratio that is used to determine CPU-NB clock speed.
Adjusted CPU-NB Frequency
Shows the adjusted CPU-NB frequency. Read-only.
CPU Core Control [Auto]
Changes the number of CPU Core in the system. If set to "Auto", the CPU will operate under the default number of cores.
AMD Turbo Core Technology [Auto]
Base on AMD Turbo Core Technology, part of CPU core ratio may pop down for providing more performance headroom for active CPU core, even AMD Cool’n’Quiet Technology is Disabled.
[Auto] |
Turbo Core Technology will linked to AMD Cool’n’Quiet |
|
Technology. |
[Enabled] |
Enables this function. |
[Disabled] |
Disables this function. |
Adjust Turbo Core Ratio [Auto]
Specifies the Turbo Core frequency multiplier.
Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
Adjust GPU Engine Frequency [Auto] Adjust GPU Engine Frequency.
Adjusted GPU Engine Frequency
Shows the adjusted GPU Engine frequency. Read-only.
English
29
English
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
DRAM Timing Mode [Auto] Selects the memory timing mode.
[Auto] |
DRAM timings will be determined based on SPD (Serial Presence |
|
Detect) of installed memory modules. |
[Link] |
Allows user to configure the DRAM timing manually for all memory |
|
channel. |
[UnLink] |
Allows user to configure the DRAM timing manually for respective |
|
memory channel. |
Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. This sub-menu will be activated after setting [Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each memory channel. The system may become unstable or unbootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.
DRAM Voltage [Auto]
Sets DRAM voltage. If set to "Auto", BIOS will set DRAM voltage automatically or you can set it manually.
Spread Spectrum [Disabled]
This function reduces the EMI (Electromagnetic Interference) generated by modulating clock generator pulses.
[Enabled] |
Enables the spread spectrum function to reduce the EMI |
|
(Electromagnetic Interference) problem. |
[Disabled] |
Enhances the overclocking ability of CPU Base clock. |
Important
•If you do not have any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you are plagued by EMI, select the value of Spread Spectrum for EMI reduction.
•The greater the Spread Spectrum value is, the greater the EMI is reduced, and the system will become less stable. For the most suitable Spread Spectrum value, please consult your local EMI regulation.
•Remember to disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause your overclocked processor to lock up.
30