MOTOROKRTM S305
Getting Started Guide
The MOTOROKR™ S305 Wireless Headphones deliver a satisfying listening experience in a sleek design. Perfect for streaming music from your music phone, MP3 player, or computer.
•Goodbye wires—Move freely with wireless control of your music and calls using intuitive push buttons on your headphones.
•Chill out in comfort—Your headphone’s comfortable behind-the-neck style makes it your ideal partner for total music immersion.
•Stay connected—Communicate hands-free with the built-in microphone.
Caution: Before using your headphones for the first time, please read the important legal and safety booklet provided with your headphones.
2
Volume Buttons (9 Ï) |
Call Button ( ) |
|
Track Forward |
Track Back |
Button (Õ) |
Button (Ô) |
|
Power Button/ |
|
Indicator Light (Í) |
|
Charging Port |
Microphone |
|
Play/Pause/Mute Button (\) |
3
You’ll need to charge your headphone’s battery before using it. Plug the charger into the charging port on your headphones (as shown below) and a wall outlet.
The indicator light is red while the battery is charging. When the battery is fully charged, the indicator light turns green.
Note: Your battery is designed to last the life of your headphones. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headphones.
4
Once charged, get your headphones paired and connected to your Bluetooth phone and/or music player.
1Turn off any Bluetooth devices previously paired (linked) with your headphones.
2Turn on the Bluetooth feature on your phone or music player.
3Turn on your headphones by pressing and holding the Ö button until the indicator light turns green.
The indicator light flashes in red and green to indicate the headphones are in discoverable mode.
4Set your phone or music player to search for Bluetooth devices.
5Select Motorola S305 from the search results on your phone or music player.
6Select OK or Yes to pair your headphones with your phone or music player.
7 If prompted, enter 0000 for the passkey.
5
connect wirelessly
The indicator light rapidly flashes green every 3 seconds when complete. For connect status:
Number |
|
of Flashes |
Indicates |
|
|
1 |
connected for calls and music |
|
|
2 |
connected for music only |
|
|
3 |
connected for calls only |
|
|
4 |
not connected—repeat pair & connect |
|
steps on page 5 |
|
|
After initially pairing and connecting your phone and/or music player and headphones, you don’t need to do
it again.
For daily use, make sure your headphones are turned ON, and your phone and/or music player’s Bluetooth feature is ON. Your headphones and phone/music player will connect automatically!
6
To confirm connection to your phone and/or music player:
make handsfree calls
1Place the headphones over your ears (see “wear your headphones” on page 8 for help).
2Dial the number you want to call and press CALL/ SEND key on your phone.
If your phone and headphones are successfully connected, you hear ringing on your headphones.
play music
1Place the headphones over your ears (see “wear your headphones” on page 8 for help).
2 Play music on your phone or music player.
If your music source and headphones are successfully connected, you hear music on your headphones.
7
Use both hands to gently rotate the headphones over your head, then place the earhooks and speakers over your ears for a snug fit as shown.
Once in place, the back of your headphones “float” over your neck.
8
wear your headphones
If your headphones become flattened or bent (such as when stored in a backpack), twist the speakers in the direction as shown to restore to original shape.
9
Press and hold the Ö button until the indicator light turns green and you hear a tone sequence.
Note: Your headphones will not turn on while charging.
Note: If your headphones are idle for 5 minutes, they automatically turn off to conserve battery charge.
10
Playback controls on your headphones can be used when listening to music from a Bluetooth-enabled music player that also provides remote control capabilities (AVRCP).
Press ×previous track |
Press Ä—next track |
Press and hold ×rewind |
Press and hold Ä—fast-forward |
Press Å—play/pause music
Press and hold Å—stop music
If remote music control is not supported by your music player, music should be controlled from your music player.
Note: With some music players, previous track must be pressed twice to go back to the previous song. Refer to your music player’s manual for specific control features.
11
Press 9 and Ï to adjust volume on your headphones.
Press Ï—decrease volume |
Press 9 —increase volume |
You’ll hear a tone when pressing 9 and Ï, and two tones when reaching maximum or minimum volume on your headphones.
Note: The volume setting on your music player may also affect volume on your headphones.
12
Use these controls and indicator on your headphones when making and receiving handsfree calls.
Volume Buttons (9) |
Call Button |
Reject |
|
Reject |
(Ï) |
( ) |
Button |
|
(Ä) |
||
|
|
||
Button |
|
|
|
(Ã) |
|
|
|
Indicator |
|
|
|
Light |
|
|
|
Mute Button (Å)
Notes:
•Some features are phone/network dependent.
•Your headphones support Handsfree and Headset profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information.
13
calls
When you receive a call, the indicator light flashes green rapidly on your headphones, and you hear a ringtone over your headphones. If music is playing, the music pauses or mutes, depending on your music player and connection setup.
Press —answer call
Press (Ãor Ä)—reject call
14
calls
When a call is active, the indicator light flashes green continuously on your headphones.
Press —end call
Press Å—mute/unmute call (reminder tone is heard during mute)
15