Loading...
CPEi 750 Series
User Manual
Table
of
Contents
Contents
Chapter 1: Desktop CPEi 750 User Guide
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Powerful Features in a Single Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Front of the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Back of the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Chapter 2: Installation
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Before you Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Procedure to Log into the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Setup Wizard and Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Chapter 3: Basic Configuration
Personalize Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Password Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Device Time Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Device Name Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Restore Factory Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Internet Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
WiMAX Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Firewall Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Dynamic DNS Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Telephony Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Chapter 4: Advanced Configuration
Port Forwarding Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Forwarding Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Local Address Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
DHCP Server Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Lease Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Lease Reservation Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Software Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Certificate Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
68P09292A81-B |
i |
JUN 2008 |
|
About Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Chapter 5: Configuring TCP/IP
Configuring TCP/IP in Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Configuring TCP/IP in Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Chapter 6: Troubleshooting
Power LED is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 A Computer Cannot Log On to the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Cannot Connect to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Additional Troubleshooting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Chapter 7: Important Safety and Legal Information
This Product complies with the following RF energy exposure standards and guidelines: . . 7-1 RF Exposure Compliance Guidelines and Operating Instructions . . . . . . . . . . . . . . . . . . . . . 7-1 FCC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 EU Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Caring for the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Disposal of Motorola Equipment in EU Countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Disposal of Motorola Networks Equipment in Non-EU countries . . . . . . . . . . . . . . . . . . . . . 7-4 CMM Disclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Usage and Disclosure Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
ii |
68P09292A81-B |
|
JUN 2008 |
Desktop CPEi 750 User Guide |
1 |
Chapter 1: Desktop CPEi 750 User Guide
Overview
Thank you for purchasing the Motorola CPE Indoor (CPEi) 750 desktop device. The Desktop CPEi allows you to connect to the wireless world easily and seamlessly without complicated installation and setup procedures. In addition, it offers you the ability to make Voice over Internet Protocol (VoIP) calls.
The Desktop CPE indoor (CPEi) device provides the user:
•Convenience - with easy plug and play functionality. Compact design.
•Control - remote management capability allows easy detection and authentication once the unit is set up.
•VoIP - two RJ11 ports allow for Voice over IP calls using your CPEi 750.
The features and the physical appearance of your Desktop CPEi device may differ slightly from the illustration.
Figure 1-1: CPEi 750
For the most recent documentation, visit the Product Documentation page on
www.motorola.com.
Powerful Features in a Single Unit
The CPE device provides the following features:
•WiMAX Authentication
•WAN DHCP Client
•LAN DHCP Server
•Home Gateway Functions
•Firewall Protection
•Port Forwarding
68P09292A81-B |
1-1 |
JUN 2008 |
|
1 |
Desktop CPEi 750 User Guide |
Front of the CPE
The front of the CPE unit contains LED Link/Activity indicators. The LEDs provide the status of the unit and signal strength indicators for easy adjustment during setup.
Table 1-1 LED Indicator Interface
LED |
Status |
Signal Strength |
Full WiMAX Signal Strength is detected |
|
when all WiMAX Signal Strength LEDs are |
|
lit. |
|
• All WiMAX Signal Strength LEDs are |
|
off - very low signal detected. |
|
• One to two WiMAX Signal Strength |
|
LEDs are lit - low signal detected. |
|
• Three to five WiMAX Signal Strength |
|
LEDs are lit - high signal detected. |
|
|
WAN WiMAX |
While acquiring access to the WiMAX |
|
Network: |
|
• All WiMAX Signal Strength LEDs vary |
|
between ON, OFF and/or BLINKING |
|
status. |
|
|
CAUTION
If all five WiMAX Signal Strength LEDs are blinking, then a software upgrade is in progress. Do NOT remove power to the CPE.
Back of the CPE
The back of the CPE unit contains the reset switch, AC Power Connector, Ethernet connector, Ethernet LED, Line 1 and Line 2 telephone ports.
1-2 |
68P09292A81-B |
|
JUN 2008 |
Desktop CPEi 750 User Guide |
1 |
Figure 1-2: CPE Ports and Connections
Table 1-2 Port Descriptions
Port |
Port Description |
Ethernet |
Ethernet Port |
|
|
Power |
AC Power Connector |
|
|
Reset |
Hardware Reset Button (A paperclip is |
|
recommended for accessing this button). |
|
|
Phone Line 1 |
RJ-11 port for use with VoIP. |
|
|
Phone Line 2 |
RJ-11 port for use with VoIP. |
|
|
Operating Information
Operating temperature for this unit is 0-40°C (32-104°F).
68P09292A81-B |
1-3 |
JUN 2008 |
|
1 |
Desktop CPEi 750 User Guide |
1-4 |
68P09292A81-B |
|
JUN 2008 |
Installation |
2 |
Chapter 2: Installation
Overview
To install the Desktop CPEi 750 Series, review the following sections:
•Before You Begin
•Easy Setup
Before you Begin
Before you begin installation, check that you have received the following items with your Desktop CPEi 750:
Table 2-1 In the box with your CPE, you should have
Item |
Description |
AC Adapter |
Power adapter and cord connects the |
|
Desktop CPE to an AC electrical outlet. |
|
|
Ethernet Cable |
The Ethernet cable connects the Internet |
|
port on your Desktop CPE to your PC or |
|
laptop computer. |
|
|
Desktop CPEi 750 Quick Start Guide |
Desktop CPEi 750 Quick Start Guide |
|
|
In addition, you need:
•A computer
•An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if your service provider has supplied you with two telephone numbers.
Easy Setup
The CPE is easily set up in your home. Basic installation equipment needed are the power adapter and cord, Ethernet cable, a PC or laptop computer and the CPE device. If you want to use the VoIP functionality, you need an RJ-11 phone cable and a telephone.
Perform the following tasks before attaching the power cord or powering up the unit:
•Stand the CPE on a flat surface.
•Plug the power adapter into the power connector on the back of the unit.
•Plug the AC power cord into an AC outlet.
•Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.
•Plug the other end of the Ethernet cable into the Ethernet connector of your computer.
•To use VoIP functionality of the phone, plug one end of the phone line into the activated phone connector on the back of the unit. Phone line activation is dependent upon your service contract.
•Plug the other end of the phone line into the phone line connector of your telephone.
68P09292A81-B |
2-1 |
JUN 2008 |
|
2 |
Installation |
Advanced Setup
The CPE can also be used to connect to a multi-port switch (hub) - purchased separately from the CPE. Connecting the CPE device to a hub allows you to connect more than one computer to your CPE device.
Procedure to Log into the CPE
Before you Begin Configuration
Some settings on your computer need to be verified or changed to ensure that your computer configuration can support the Desktop CPE.
Verify that the IP addresses and DNS settings are automatically generated in your Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the chapter titled “Configuring TCP/IP” for additional information.
Logging in to the CPE
Use the following procedure to log into the Desktop CPE:
1.On a computer that is connected to the Desktop CPE, open a web browser.
2.In the Address or Location field, type http://mywimax. and press ENTER to display the login screen.
Include the period (.) after http://mywimax. in order to access the login screen.
NOTE
Enter the IP address: http://192.168.15.1 into Address field in order to gain access to your CPE. If you cannot access the CPE, refer to the chapter titled: Configuring TCP/IP for more information.
3.The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a password.
2-2 |
68P09292A81-B |
|
JUN 2008 |
Installation |
2 |
Figure 2-1: Login Screen
4.In the Password field, type the password (default is motorola).
5.Click Login.
6.First time users see a pop-up box that states: “The Wizard application will guide you through for the first time configuration”. Click OK button to continue.
7.Click the OK button to launch the wizard application.
Setup Wizard and Authentication
Step 1 - Change Password
Once you have launched the setup wizard, you are prompted to change your password. Motorola recommends using a password to protect your home network and CPE device. Passwords are case sensitive.
To change your password:
•Ensure the “Enable Login Password Protection” box is checked.
•Enter a New Login Password in the box. Passwords can be no more than 20 characters in length.
•Re-type your new password in the Confirm New Login Password box.
•Click Next.
If you forget your password, you can reset it back to the default (motorola) password. To reset the password, press and hold the reset button on the back of your CPE for 5 or more seconds. Before resetting the CPE, ensure that the power is ON.
Step 2 - Device Time
This screen allows you to set the time zone and to enable Daylight Savings Time (when applicable) for your location.
•Select the appropriate time zone for your location from the drop-down box.
68P09292A81-B |
2-3 |
JUN 2008 |
|
2 |
Installation |
•Check the box that is called “Auto Adjust for Daylight Savings Time” if you live in a region that observes Daylight Savings Time. This box is checked by default.
•Click the Next button.
Step 3 - WiMAX Security
The WiMAX Security tab contains your authentication method. Check with your service provider to determine if they require a user name and password for authentication purposes.
•If the Authentication Method is EAP-TLS, no User Name and Password are required. Enter the Realm information supplied by your service provider. Click the Next button.
•If the Authentication Method is EAP-TTLS/MS-CHAPv2, enter a User Name and Password, and Realm information supplied by your Service Provider. Once you have entered the User Name/Password/Realm information, click the Next button.
•If you are unsure of the Authentication Method, select EAP-TLS (which is the default) and click the Next button.
Step 4 - Account
The Account tab allows you to manage Voice over IP (VoIP) related services. Please consult with your telephony service provider for these settings.
Click the Apply button when finished.
Congratulations! You have now completed the setup of your WiMAX connection. Click OK on the Congratulations! dialog box.
A status screen appears that shows Network status and telephony status. The Network Status screen provides any status associated with your WiMAX Wireless Broadband connection. The Telephony Status screen provides status of your telephony service.
•The Restart button is used to restart the device. The restart button is available on every screen.
•The Wizard button starts the set-up wizard over again.
•The Refresh button refreshes the screen with the current status.
•The Auto Refresh button allows the web browser to automatically refresh at the interval determined in the Control Panel menu.
2-4 |
68P09292A81-B |
|
JUN 2008 |
Installation |
2 |
Figure 2-2: Status Screen
Restart Button
Figure 2-3: Restart Button
68P09292A81-B |
2-5 |
JUN 2008 |
|
2 |
Installation |
2-6 |
68P09292A81-B |
|
JUN 2008 |
Basic Configuration |
3 |
Chapter 3: Basic Configuration
Once the CPE setup has been completed, you can log in to your CPE from any computer on your home network. To log in type the device name in the address bar on your computer. The default device name is mywimax.
This section describes the PERSONALIZE, INTERNET, and STATUS Menus that are available.
Personalize Menu
The Personalize menu provides the following tabs:
•Password
•Device Time
•Device Name
•Restore Factory Settings
Figure 3-1: Personalize Menu
68P09292A81-B |
3-1 |
JUN 2008 |
|
3 |
Basic Configuration |
Password Tab
The password tab allows you to enable/disable password protection. You can also change your password here. Be sure to click the Apply button when finished
.
Table 3-1 Password Tab
Field or Button |
Description |
Enable Login Password Protection |
Checking this box requires login password |
|
protection. |
|
|
New Login Password |
Enter your new password here. Maximum |
|
20 characters. Passwords are case |
|
sensitive. |
|
|
Confirm New Login Password |
Re-enter your new password here, exactly |
|
as entered in the previous step. |
|
|
Device Time Tab
The Device Time tab allows you to establish the time zone for your location. It also allows you to automatically adjust for Daylight Savings Time if necessary. Be sure to click the Apply button when finished.
Table 3-2 Device Time Tab
Field or Button |
Description |
Current Local Time |
Current Local Time |
|
|
Time Zone |
Select your local time zone from the drop- |
|
down box. |
|
|
Auto Adjust for Daylight Saving Time |
Check this box if your location observes |
|
Daylight Savings Time. (Default is |
|
checked) |
|
|
Device Name Tab
The Device Name tab allows you to rename your CPE device. The Device Name is the name you enter on an internet browser address bar to access your CPE device. Be sure to click the Apply button when finished.
Table 3-3 Device Name Tab
Field or Button |
Description |
New Device Name |
Enter the new name for the CPE device. |
|
Maximum 20 characters. |
|
|
3-2 |
68P09292A81-B |
|
JUN 2008 |
Loading...