Size:
243.55 Kb
Download

Technical data sheet for

GAS COOKTOPS 600mm

RN8400G-B,RN8400G-CB,RN8400G-LS,RN8403G-B,RN8403G-CB,RN8403G-LS,RN8406G-B,RN8406G-CB,RN8406G-LS

RN8400G-LS

Overall Construction

Cooktop

Welded hob with 1.5mm 304 stainless steel bull nose

Splashback and side panels 1.2mm 304 stainless steel

Front panels 0.9mm 304 stainless steel

Aluminised steel internal construction

Cast iron 28MJ/hr open burners with forged brass cap

Vitreous enamelled cast iron potstands

Vitreous enamelled open burner spill covers

Cast iron simmer plates (optional extra)

12mm thick mild steel griddle plate

2.5mm 304 stainless steel griddle splash guards

Vitreous enamelled spill trays

Griddle sections are standard on RH side. Available on LH side to order or by conversion.

Bench mount (supplied as –Bmodel)

Four 63mm dia. heavy-duty1.2mm 304 stainless steel bench legs with adjustable feet

Adjustable height 80mm – 105mm

Cabinet base (supplied as –CBmodel)

Fully modular for match suite finish

Double skin 0.9mm 304 stainless steel interior and exterior

Optional GN 1/1 4 position racking kit

63mm dia. heavy-duty1.2mm 304 stainless steel legs with adjustable feet

Heavy-dutyconstruction 28 MJ/hr open burners Flame failure standard Pilot burners optional

300mm griddle plate options Optional simmer plates

3 models of base unit Stainless steel exterior Easy clean

Easy service Fully modular

Leg stand (supplied as –LSmodel)

Fully modular for matched suite finish

Framed top for connection to Cooktop

63mm dia. heavy-duty1.2mm 304 stainless steel legs with adjustable feet

Fully modular framed stand shelf with 0.9mm 304 stainless steel finish

Suitable for rear or through shelf gas connection to Cooktop

Quick assembly design (no tools required)

Controls

Variable high to low controls to open burners

Open burners flame failure standard with pilot burners optional

Variable high to low controls to griddles

Griddles standard with pilot, flame failure and piezo ignition

Large easy use control knob - heat resistant reinforced

Easy view control settings on knob

Cleaning and Ser vicing

All models with easy clean stainless steel external finish

Lift off burners heads and vitreous enamelled burner spill covers

Vitreous enamelled spill trays under open burner and griddle sections

Access to all parts from front of unit

Technical data sheet for

GAS COOKTOPS 600mm

Specif ications

Burners

Open Burners 28MJ/hr dual flame ring with simmer rate

Griddle Burners 20MJ/hr

Gas power

RN8400G

112 MJ/hr, 31kW

RN8403G

76 MJ/hr, 21kW

RN8406G

40 MJ/hr, 11kW

Griddle Plate

300mm Griddle cooking surface 292mm x 475mm, 1387cm2

600mm Griddle cooking surface 592mm x 475mm, 2812cm2

Gas connection

R 3/4 (BSP) male

130mm from RH side, 32mm from rear, and 655mm from floor

All units supplied with Natural and LP gas regulator

Dimensions

Bench models

Width 600mm

Depth 805mm

Height 315mm

Incl. splashback 530mm

All models (excluding Bench model)

Width 600mm

Depth 805mm

Height 915mm

Incl. splashback 1130mm

Packing data

Bench and Leg Stand models

0.37m3

Width 640mm

Depth 865mm

Height 665mm

Cabinet Base models

0.70m3

Width 640mm

Depth 865mm

Height 1255mm

Gas types

Available in Natural gas and LP gas Please specify when ordering

Units supplied complete with gas type conversion kits

Other gas types on request

Options at extra cost

Simmer plates (replaces Potstand) Ribbed griddle plates

Joining caps Castors

Plinth mounting

RN8400G-B

Bench Model

RN8400G-CB

Cabinet Base

RN8400G-LS

Leg Stand

Plan

Australia www.moffat.com.au

New Zealand www.moffat.co.nz

Australia

Moffat Pty Limited

Victoria/Tasmania

740 Springvale Road

Mulgrave, Victoria 3170 Telephone 03-95183888

Facsimile 03-95183833 vsales@moffat.com.au

New South Wales

Telephone 02-88334111 nswsales@moffat.com.au

South Australia

Telephone 03-95183888 vsales@moffat.com.au

Queensland

Telephone 07-36308600 qldsales@moffat.com.au

Western Australia

Telephone 08-95620263 jberent@moffat.com.au

New Zealand

Moffat Limited

Christchurch

Telephone 03-3891007 sales@moffat.co.nz

Auckland

Telephone 09-5743150 sales@moffat.co.nz

ISO9001

Quality

Management

Standard

Designed and manufactured by

ISO9001

All Waldorf products are designed and manufactured by Moffat using the internationally recognised ISO9001 quality management system, covering design, manufacture and final inspection, ensuring consistent high quality at all times.

In line with policy to continually develop and improve its products,Moffat Limited reserves the right to change specifications and design without notice.

Printed in New Zealand

© Copyright Moffat Limited

Moffat/4639/BH/1M/8.05