Technical data sheet for
GAS COOKTOPS 1200mm
G518D-B, G518D-CB, G518D-LS, G518D-RB,
G518C-B, G518C-CB, G518C-LS, G518C-RB,
G518B-B, G518B-CB, G518B-LS, G518B-RB,
G518A-B, G518A-CB, G518A-LS, G518A-RB
Heavy-duty construction 28 MJ/hr open burners Flame failure standard Pilot burners optional
300mm, 600mm, and 900mm griddle plate options
Optional simmer plates 3 models of base unit
1 model of ventilated refrigeration base with drawer/door options
Rear rollers
Stainless steel exterior Easy clean
Easy service Fully modular
Overall Construction
Cooktop
•Welded hob with 1.5mm 304 stainless steel bull nose
•Side panels 1.2mm 304 stainless steel
•Splashback 1.2mm 304 stainless steel
•Vitreous enamelled control panel
•Aluminised steel internal construction
•Cast iron 28MJ/hr open burners with forged brass cap
•Vitreous enamelled cast iron potstands
•Vitreous enamelled open burner spill covers
•Cast iron simmer plates (optional extra)
•12mm thick mild steel griddle plate
•2.5mm 304 stainless steel griddle splash guards
•Stainless steel spill trays
Griddle sections are standard on RH side. Available on LH side and centres to order or by conversion.
Bench mount (supplied as –B model)
•Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet
•Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
•Fully modular for match suite finish
•Double skin 0.9mm 304 stainless steel interior and exterior
•Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)
•Up to eight 65mm GN 1/1 capacity
•63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear
Leg stand (supplied as –LS model)
•Fully modular for matched suite finish
•Framed top for connection to Cooktop
•63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear
•Fully modular framed stand shelf with 0.9mm 304 stainless steel finish
•Shelf to top stainless steel backstop panel for convenience and rigidity
•Suitable for rear or through shelf gas connection to Cooktop
•Quick assembly design
4825 BS specsNZ-AUSv20B2.indd 39
G518D-LS
Refrigerated base (supplied as –RB model)
•Self contained suite matched modular base
•Ventilated system with R134a refrigerant
•-2° to + 8°C temperature (Tropical Climate rated)
•Two GN 1/1 drawers and one door standard
•100mm deep pan drawer capacity
•Heavy-duty European telescopic drawer guides
•Magnetic drawer gaskets (replaceable without tools)
•50mm fully foamed CFC free insulation
•304 stainless steel exterior and interior
•Anti-corrosion treated evaporator
•No condensate drain required
•63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet
•Condensing unit removable through front of unit for service
•Easy clean interior
Controls
Cooktop
•Variable high to low controls to open burners
•Open burners flame failure standard with pilot burners optional
•Variable high to low controls to griddles
•Griddles standard with pilot, flame failure and piezo ignition
•Large easy use control knob - heat resistant reinforced
•Easy view control settings on knob
Refrigerated base
•Digital control electronic thermostat
•Automatic defrost
•Automatic evaporation of defrost water
•-2° to +8°C temperature range
Cleaning and Servicing
•All models with easy clean stainless steel external finish
•Lift off burner heads and vitreous enamelled burner spill covers
•Stainless steel spill trays under open burner and griddle sections
•Access to all parts from front of unit
•Refrigerated Base condenser removable through front of unit
28/12/06 2:32:03 PM