Moffat G518A-RB, G518C-LS, G518B-LS, G518C-RB, G518D-B User Manual

...
0 (0)
Moffat G518A-RB, G518C-LS, G518B-LS, G518C-RB, G518D-B User Manual

Technical data sheet for

GAS COOKTOPS 1200mm

G518D-B, G518D-CB, G518D-LS, G518D-RB,

G518C-B, G518C-CB, G518C-LS, G518C-RB,

G518B-B, G518B-CB, G518B-LS, G518B-RB,

G518A-B, G518A-CB, G518A-LS, G518A-RB

Heavy-duty construction 28 MJ/hr open burners Flame failure standard Pilot burners optional

300mm, 600mm, and 900mm griddle plate options

Optional simmer plates 3 models of base unit

1 model of ventilated refrigeration base with drawer/door options

Rear rollers

Stainless steel exterior Easy clean

Easy service Fully modular

Overall Construction

Cooktop

Welded hob with 1.5mm 304 stainless steel bull nose

Side panels 1.2mm 304 stainless steel

Splashback 1.2mm 304 stainless steel

Vitreous enamelled control panel

Aluminised steel internal construction

Cast iron 28MJ/hr open burners with forged brass cap

Vitreous enamelled cast iron potstands

Vitreous enamelled open burner spill covers

Cast iron simmer plates (optional extra)

12mm thick mild steel griddle plate

2.5mm 304 stainless steel griddle splash guards

Stainless steel spill trays

Griddle sections are standard on RH side. Available on LH side and centres to order or by conversion.

Bench mount (supplied as –B model)

Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs with adjustable feet

Adjustable height 80mm – 105mm

Cabinet base (supplied as –CB model)

Fully modular for match suite finish

Double skin 0.9mm 304 stainless steel interior and exterior

Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)

Up to eight 65mm GN 1/1 capacity

63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear

Leg stand (supplied as –LS model)

Fully modular for matched suite finish

Framed top for connection to Cooktop

63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear

Fully modular framed stand shelf with 0.9mm 304 stainless steel finish

Shelf to top stainless steel backstop panel for convenience and rigidity

Suitable for rear or through shelf gas connection to Cooktop

Quick assembly design

4825 BS specsNZ-AUSv20B2.indd 39

G518D-LS

Refrigerated base (supplied as –RB model)

Self contained suite matched modular base

Ventilated system with R134a refrigerant

-2° to + 8°C temperature (Tropical Climate rated)

Two GN 1/1 drawers and one door standard

100mm deep pan drawer capacity

Heavy-duty European telescopic drawer guides

Magnetic drawer gaskets (replaceable without tools)

50mm fully foamed CFC free insulation

304 stainless steel exterior and interior

Anti-corrosion treated evaporator

No condensate drain required

63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet

Condensing unit removable through front of unit for service

Easy clean interior

Controls

Cooktop

Variable high to low controls to open burners

Open burners flame failure standard with pilot burners optional

Variable high to low controls to griddles

Griddles standard with pilot, flame failure and piezo ignition

Large easy use control knob - heat resistant reinforced

Easy view control settings on knob

Refrigerated base

Digital control electronic thermostat

Automatic defrost

Automatic evaporation of defrost water

-2° to +8°C temperature range

Cleaning and Servicing

All models with easy clean stainless steel external finish

Lift off burner heads and vitreous enamelled burner spill covers

Stainless steel spill trays under open burner and griddle sections

Access to all parts from front of unit

Refrigerated Base condenser removable through front of unit

28/12/06 2:32:03 PM

Loading...
+ 1 hidden pages