Moen CSI1511 Specifications

1000 series straights (Y finish) are
engineered wood (MDF – medium density fibreboard). W and X finishes are wood Corners are wood. Mounting brackets are ABS plastic.
25300 AL MOE N D RIV E N ORT H O LMS TE D, OH 440 70 CORPORATE HE ADQ UAR TE RS: (8 00) 32 1-880 9 FA X: (8 00 ) 8 48- 663 6 INTE RNA TI ONA L: (440) 96 2-2 000 FA X: (44 0) 962 -2726 CUST OM ER SER VIC E (USA): 80 0- 882 -0116 FAX: ( 888 ) 3 79 -2720
Copyright Creative Specialties International Literature #BA1409
Cleaning Instructions:
1. Remove backing to expose adhesive on mounting brackets.
2. Position corner template on the mirror.
3. Guided by corner template, secure corner mounting bracket to mirror.
4. Once mounting bracket is secured, remove corner template
5. Repeat for all corners.
6. Center straight template at edge of mirror.
7. Guided by straight template, secure straight mounting bracket to mirror.
8. Once mounting bracket is secured, remove straight mounting template.
9. Repeat on all sides of mirror.
10. Attach decorative corners onto corner mounting brackets.
11. With a marker, trace a line on the mirror along the inner edges of the corner brackets.
12. Remove decorative corners.
13. Measure between marked lines to determine lengths of straight pieces.
14. Cut straight pieces to measurements made in step 13.
15. Press straight pieces onto mounting brackets.
16. Press decorative corners onto mounting brackets.
Stock Number:______________________Mirrorscapes By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1000 Series
Mirrorscapes Technical Specification
To preserve the fine finish of this product, clean only with a soft cloth. Do not use commercial or abrasive cleaners.
Loading...