Mitsubishi PRS-X340, DEQ-P9, TS-W12PRS, TS-C1300R, DEX-P9R User Manual

PRS — PIONEER REFERENCE SERIES

s o n i c e x c e l l e n c e

r e d e f i n e d

Sound simply does not get better than PRS — the Pioneer Reference Series. Pioneer should know. When it

comes to high-end sonic expertise and experience, no other audio maker comes close. That’s why PRS turns up

consistently at championship sound competitions. Judge for yourself. In pure sonic quality and unparalleled

performance, PRS components soar above the crowd. Combined as a system, it sounds supreme.

51

24-Bit multi-bit D/A Converters

PRS — pure audio system

DEX-P9R

COMPONENT CD RDS TUNER

Pioneer’s lengthy experience with high-end audio systems continues with the DEX-P9R ultra-high-quality CD RDS component tuner. The DEX-P9R transfers digital data directly from the CD to the audio processors, so you get as close as possible to the original sound, with an absolute minimum of distortion and noise. The DEX-P9R can function alone, but when optically paired with the DEQ-P9 high-tech digital preamp/equaliser, it forms a system with unrivalled audio, DSP and network functions. If you really want to experience what this system is capable of, then make sure to use thoroughly engineered and pure sound-proven amps and speakers, such as the PRS series. Go for an unparalleled listening experience.

	DEQ-P9	DIGITAL PREAMP/EQUALISER
		By adding this DSP unit to the DEX-P9R, the discerning driver can enjoy the versatility, sonic purity and
		distortion-free control of digital signal processing and network functions. By converting the incoming
		signal to digital form, it enables you to balance the output signal to match the acoustic characteristics
		of your car and to create your personal sound profile by using the parametric equaliser and Sound Field
		Control functions.

Full Digital System

Pioneer’s combination of the ultra-high-quality DEX-P9R component CD RDS tuner and the DEQ-P9, a Universal Digital Preamp/Equaliser, creates a pure audio system that redefines sonic excellence. Pioneer’s acclaimed hi-bit technology converts the original 16-bit CD audio signal to 24-bits, which improves signal linearity and maintains pure audio quality during digital processing. The DEX-P9R has optical digital input for connecting Pioneer’s XDV-P9 multi-DVD player, and optical digital outputs for connecting to the DEQ-P9 off-board digital network. This network features 3 ultra-precise 51-bit Digital Signal Processors to implement the 31-band graphic equalisation with independent Left/Right control, Time Alignment and the 4-way digital network.

The DEQ-P9’s outputs are loaded with six Burr Brown 24-bit multi-bit DACs — the best of the best! Each of the audio output channels features 2 separate DACs, arranged in SignMagnitude conversion mode. This eliminates zero cross distortion, and offers an astounding S/N ratio and an ultra-wide dynamic range. The

final result is unparalleled sonic clarity, faithfully reproducing the resonance of the original recording in any car.

The DEX-P9R also functions as a stand-alone headunit. In this case, external amplifiers can be used to drive the front and rear speakers as well as a subwoofer over the non-fading pre-out. Each of the outputs from the DEX-P9R features a 4 Hi-Volt pre-out, and the analogue conversion is done using Burr Brown 24-bit multi-bit DACs.

To get the most from the DEX-P9R, however, Pioneer strongly recommends using it in combination with the DEQ-P9. The DEQ-P9 has a 4-way output, for driving a low-range woofer, a midrange speaker, a tweeter and a subwoofer. This can also be adapted to a low midrange woofer, a tweeter, a subwoofer and full-range rear fill speakers, if required. The external amplifiers are driven by the DEQ-P9’s Hi-Volt outputs. These very high-quality outputs use their own balanced plus/minus PWM power supply, to minimise noise and distortion.

Audiophiles will also appreciate Pioneer’s attention to detail. The aluminium front panel and elegant blue OEL display of the DEX-P9R are a sight to behold. For absolute perfection, choose the display off mode to eliminate noise created by the display’s power circuits. Special touches such as the copper-plated chassis for reducing noise inducing eddy currents, gold-plated RCA terminals and the use of 99.99 % pure Oxygen-Free Copper in the RCA cables make these products the acoustic perfectionist’s dream.

Display Off Mode

Copper-plated

Chassis

Graphic Equaliser

Crossover Network Adjustment

52the key features are indicated by means of coloured icons. for a full explanation on all icons, see pages 92 – 94. for full features please see page 101.

PRS — amplifiers

Pioneer’s PRS amps are designed to drive speakers to the limit — or rather, beyond the limit. Thanks to the MOSFET power supply, these amps offer more distortion-free sound power than ever before. In addition, a 4-channel crossover (PRS-X340) gives you several power options, while a high/low switch lets you choose between 3 – 9 kHz or 40 – 120 Hz. The bandpass filter makes bi-amplifying a breeze. So, if you want truly awesome power, it's even possible to mount two PRS series amps together.

Mount PRS Series Amps Together

Mount two PRS series amplifiers together to create one massive amplifier. The mounting feet on the interior side can be removed or rotated inward to allow the amplifiers to mount flush against each other.

Intelligent Power System

A car’s normal 12 V ~ 14 V power supply restricts output power to a theoretical limit of about 50 W through a 4 ohm load. For more power, all Pioneer PRS amplifiers use a PWM Regulated MOSFET power supply unit to boost the car’s line voltage and control their own power supply.

This control is exercised by Pioneer's Intelligent Power System, which does everything to ensure you get peak power output without noise by giving an extra current boost to the speakers to compensate for any drop in voltage caused by other electric loads in the car. You can now have the power you crave.

MOSFET Devices for Optimum Performance

Pioneer MOSFET output devices, incorporated in all Pioneer PRS series amplifiers, offer significant advantages over traditional bipolar devices such as faster switching results, less crossover distortion and less noise. High power used to mean high heat and resistance that could lead to noise — but not anymore. Pioneer PRS amplifiers use a PWM Regulated MOSFET power supply unit that's designed to keep its cool even under pounding pressure.

With full MOSFET-driven power supplies and MOSFET output sections, Pioneer PRS amplifiers are better than ever at delivering power!

PRS-X340 4-CHANNEL BRIDGEABLE POWER AMPLIFIER

4 x 150 W - 2 x 500 W Max.

PRS-X320 2-CHANNEL BRIDGEABLE POWER AMPLIFIER

2 x 200 W - 1 x 800 W Max.

PRS-X220* 2-CHANNEL BRIDGEABLE POWER AMPLIFIER

* Not available in the UK.

2 x 120 W - 1 x 400 W Max.

for full features please see page 54.

53

PRS — amplifiers

PRS Amplifiers — Features

Max. output power

Continuous output power (RMS) (14.4 V) 20 – 20 kHz/4 ohms

20 – 20 kHz/2 ohms Bridged 4 ohms

DIN output power (DIN45324, +B = 14.4 V)

Variable Crossover network

A channel

B channel

Low Frequencies (-12 dB/oct)

High Frequencies (-12 dB/oct)

LPF/HPF Network (-12 dB/oct)

Input level/gain control

PWM Regulated MOSFET power supply

High Voltage Input capability (400 mV — 6.5 V)

Low load impedance capability (1 — 8 ohm)

Variable Bass Emphasis (0 — 18 dB)

Subsonic filter: 15 Hz (-24 dB/oct)

Gold-plated RCA input and output terminals (full range) enabling Link Top connection

Gold-plated screw-type speaker terminals

Large gold-plated power/ground terminals (screw-type)

High performance balanced isolator circuit

Reversible endcaps for installation versatility

MOSFET output section

PRS-X340	PRS-X320	PRS-X220*
4 x 150 W	2 x 200 W	2 x 120 W
2 x 500 W	1 x 800 W	1 x 400 W
4 x 37.5 W	2 x 50 W	2 x 30 W
4 x 75 W	2 x 100 W	2 x 60 W
2 x 150 W	1 x 200 W	1 x 120 W
4 x 115 W or	2 x 163 W or	2 x 87 W or
2 x 360 W	1 x 486 W	1 x 313 W
LPF-Low, LPF High,
HPF-Low, BPF
LPF-Low, LPF-High,
HPF-Low, HPF-High
40 – 120 Hz
3 – 9 kHz
	50 – 120 Hz	50 – 120 Hz
•	•	•
•	•	•
•	•	•
•	•	•
	40 – 120 Hz	60 Hz
	•
•	•	•
•	•	•
•	•	•
•	•	•
•	•	•
•	•	•

Warning: Pioneer Power Series amplifiers are designed to supply higher output power than conventional amplifiers. Therefore, please use a subwoofer whose nominal input power is about twice the connected Power Series amplifier’s continuous output power.

* Not available in the UK.

PRS — recommended system set-ups

To get the most from the DEX-P9R, Pioneer strongly recommends using it in combination with the DEQ-P9 and the PRS amps and speakers, to create a variety of system set-ups that suit your sound preference and in-car audio characteristics. In both the configurations shown below, the external amplifiers are driven by the DEQ-P9’s Hi-Volt outputs. These very high-quality outputs use their own balanced plus/minus PWM power supply to minimise noise and distortion. Create the ultimate system by using the DEQ-P9 in its 4-way (low, mid, high, subwoofer) configuration for optimum performance. Each band has its dedicated speaker, while the Crossover Network and Time Alignment feature allow for each band to be precisely tuned. Result: perfectly balanced acoustics. If you prefer to work with a 2-way plus subwoofer system, the resulting extra channel won't go to waste. It can be used to drive a full-range rear fill speaker and will enhance the rear seat acoustics.

Front 3-way Plus 2 Subwoofers System —

Front 3-way/Rear 2-way/2 Subwoofers System

Complete L/R Mirror Layout

DEX-P9R*

DEX-P9R

TS-T3PRS

TS-T3PRS

DEQ-P9

DEQ-P9

Front 3-Way

Front 3-Way

High

High

High Mid Low

PRS-X320

PRS-X320

TS-T3PRS

TS-T3PRS

Sub

TS-C1300R

TS-C1300R

TS-C1300R

TS-C1300R

without tweeter

without tweeter

Mid

L

R

Mid

PRS-X320

without tweeter

without tweeter

PRS-X320

REAR 2-WAY

TS-M7PRS

TS-M7PRS

REAR 2-WAY

Low

Low

PRS-X340

TS-M7PRS

TS-M7PRS

Tweeter

Tweeter

PRS-X320

PRS-X320

TS-C1700R

PRS-X340

TS-C1700R

Sub

Sub

TS-W12PRS

PRS-X340

TS-W12PRS

TS-W12PRS

TS-W12PRS

Rear Seat

Front/Rear Seat

Front Seat

Subwoofer

Subwoofer

To bring out the full potential of the DEQ-P9, set up a front 3-way system plus subwoofer, as shown here. This system configuration guarantees the utmost in accurate sound staging.

* For specific needs — even in this system configuration — rear speakers can be added via the DEX-P9R’s rear RCA output.

The front 3-way configuration in this system consists of a low and midrange speaker and a tweeter, driven by the DEQ-P9's active network. The rear 2-way configuration is driven through the mid-output channel of the DEQ-P9. This mid-output can be used as a full-range output, which can then be combined with the UD-N2PRS crossover network to drive a 2-way system. The rear speaker's sound output will improve the ambience, while also giving rear seat passengers a better listening experience.

54

									PRS — speakers & passive crossover network
		TS-T3PRS							1-1/4” (30 MM) FLUSH MOUNT SOFT DOME TWEETER
		200 W							How low does your tweeter go? The tweeter must be able to play sweet and low with an extended
		Max.							low-frequency response that can actually improve the overall imaging and staging of your audio
						. )			system. The TS-T3PRS has a large-sized, 30 mm Soft Dome Diaphragm for higher sound imaging
				D	ia				without any harshness. Its magnetic circuit uses an ultra-strong (30.5 g) Neodymium magnet for
			(3
		ø75							faster and more precise transient response. The Sealed Performance Chamber is designed to extend
						120°
	120°
									the crossover frequency down to 3 kHz. This chamber was carefully tuned using 4 different acoustic
							Dia.)
									damping materials.
							ø 87 (3 - 3/8
	3 - ø 4.3(3/16 Dia.) Holes						15 (9/16)	30 (1-1/4)	• 30 mm Polyester Fibre diaphragm	• Die-cast aluminium back chamber
									• Large Neodymium magnet (30.5 g)	• Nominal input power: 60 W
									• Die-cast aluminium flange	• 1,000 – 30,000 Hz, 92 dB (1 W/1 m)

TS-M7PRS 6-3/4” (17 CM) MID-BASS DRIVER

200 W

Max.

4	°	45°
5

4 - 4.5 x 6.5 Holes

(3/16 x 1/4 )

		)
		.
	-1/4)	Dia
158	(6
ø

ø 170 (6 - 3/4 Dia.)	ø 100 (4 Dia.)	ø 143 (5 - 5/8 Dia.)
8.3 (5/16)
	67.3 (2 - 5/8)

The TS-M7PRS Mid-Bass Driver was meticulously designed to reproduce real strings and vocals with less distortion. Thanks to the Aramid Fibre Composite Cone and the Butyl Rubber Symmetrical Balanced Surround, you can expect smooth, accurate sound from mid-bass to upper midrange frequencies. If it's precision control of sound you're after, the TS-M7PRS comes highly recommended. And you can combine it with the DEX-P9R and DEQ-P9R for the ultimate in acoustic pleasure.

• Aramid Fibre Composite Cone woofer	• Gold-plated binding post-screw
• Symmetrically balanced Butyl Rubber	terminals
Surround	• Nominal input power: 60 W
• Aluminium die-cast frame	• 28 – 10,000 Hz, 91 dB (1 W/1 m)

TS-W12PRS 12” (30 CM) DUAL VOICE COIL C-TYPE SUBWOOFER

1200 W

Max.

8 - ø 6.5 Holes (1/4 Dia.)
	.)
	ia
	D
	-7/8
	2(11
0
3
ø

322 (12 - 3/4 Dia.)	ø 278 (11 Dia.)
ø
19 (3/4)	133 (5-1/4)
	152 (6)

Introducing TS-W12PRS, a subwoofer that can handle real power and equipped with the Voice Coil Cooling System (VCCS), which together with a giant magnetic circuit, draws heat away from the inside of the sub, so that the sound stays natural and your subwoofer keeps its cool. There's also a 3” (76 mm) dual-layer long voice coil (2 x 4 ohm) that, combined with the extremely light Aramid Fibre Composite Cone, results in a very strong moving force.

• Aramid Fibre Composite Cone woofer	• Lowest resonance frequency (Fs): 24 Hz
• Dual 4 ohm Voice Coil design (2 or 8 ohm)	• Qts: 0.39
• VCCS (Voice Coil Cooling System)	• Recommended Sealed Enclosure (± 10 %): 28 litres/1.0 cu. ft.
• Aluminium die-cast frame	• Vas: 93 litres/3.3 cu. ft.
• Gold-plated binding post-screw terminals	• Nominal input power: 300 W
• Low-Q design for use in small sealed box	• 15 – 2,000 Hz, 92 dB (1 W/1 m)

UD-N2PRS 2-WAY PASSIVE CROSSOVER NETWORK

200 W

Max.

95 33.3

142

Pioneer has designed a 2-way, passive crossover network especially for use with the TS-T3PRS and TS-M7PRS. With its discriminating EMI (Electromagnetic Interference) shielding chassis, the UD-N2PRS network provides simple, clear and precise sound solutions.

• EMI (Electromagnetic Interference) shielding chassis	• Tweeter attenuation: 0 dB/-3 dB
• Selected quality devices	• Nominal input power: 60 W

please see page 91 for speaker technical parameters.

55

european reference separate component speaker series

The Pioneer European Reference Separate Component Speaker Series, with standard European frame size, offers bold music lovers an exciting opportunity to create a super high-quality sound system.

These speaker systems contain carefully chosen, precision-engineered woofers, tweeters and crossovers, all designed to bring you to new levels of sound perfection. The Pioneer Aramid Fibre Composite Cone woofers bring both music and vocals right into your car, creating a warm and “original” sound. The Soft Dome tweeter reproduces accurately the high notes while the Passive Crossover Network guarantees an optimal distribution of low and high frequencies from the amplifier to the woofers and tweeters.

A guaranteed unforgettable listening experience!

TS-C1700R

220 W

Max.

		Ø147
	Ø179	70
	38	Ø50
42	41	19.6

17 CM SEPARATE 2-WAY SPEAKER SYSTEM

•17 cm Ø Aramid Fibre Composite Cone woofer with Butyl Rubber Edge

•25 mm Ø Soft Dome tweeter with Neodymium magnet

•VCCS (Voice Coil Cooling System)

•Aluminium die-cast woofer basket

•Gold-plated binding post-screw woofer terminals

•Tweeter fitting kits included:

-Surface mount slant spacer

-Custom tweeter bracket for Renault, Peugeot and Citroën

TS-C1300R 13 CM SEPARATE 2-WAY SPEAKER SYSTEM

160 W

Max.

		Ø121
	Ø155	56.5
	38	Ø50
42	41	19.6

•13 cm Ø Aramid Fibre Composite Cone woofer with Butyl Rubber Edge

•25 mm Ø Soft Dome tweeter with Neodymium magnet

•VCCS (Voice Coil Cooling System)

•Aluminium die-cast woofer basket

•Gold-plated binding post-screw woofer terminals

•Tweeter fitting kits included:

-Surface mount slant spacer

-Custom tweeter bracket for Renault

Aramid Fibre Composite Cone Woofer

The woofer of the TS-W12PRS, TS-M7PRS, TS-C1700R and TS-C1300R was meticulously designed to reproduce real strings and vocals with less distortion. Thanks to the Aramid Fibre Composite Cone, you can expect accurate, smooth sound from mid-bass to upper midrange frequencies.

Frequency Response

Sensitivity (1 W/1 m)

Nominal input power

TS-C1700R	TS-C1300R
25 – 32,000 Hz	35 – 32,000 Hz
90 dB	90 dB
70 W	40 W

56please see page 91 for speaker technical parameters and pages 89 – 91 for universal speaker application chart.

pioneer sound tuning

Pioneer is definitely a respected name on the international tuning scene. Talented professionals count on the high-quality standard of Pioneer products to win. That’s why Pioneer high-end gear consistently appears in the most impressive combinations and award-winning cars at many international tuning shows. Continuously launching innovative products with breakthrough technology, Pioneer will certainly make a strong showing in the Sound Quality and SPL (Sound Pressure Level) competitions. Pioneer is also proud to be an official sponsor of the 2003 EMMA (European Mobile Media Association) sound competitions. Check out several of the finest show cars available, loaded with top-of-the-line Pioneer products.

PIONEER EUROPE’S MERCEDES ML430

Showing sound professionals how it is done isn’t easy. That’s why the Pioneer Europe’s Mercedes ML430 will be on tour this year, to showcase the best sound quality and installation with state-of-the-art Pioneer equipment. Loaded with the best that Pioneer has to offer — the DEX-P9R component CD tuner; two loudspeakers in the front door: TS-C1300R for the mid-high range, TS-C1700R for the mid-low range; TS-T3PRS tweeters in the dashboard; TS-M7PRS and TS-T3PRS in the rear door; PRS-X340 amplifiers and TS-W12PRS subwoofers — it is certain to be a familiar face at a majority of sound events across Europe.

LARS KARLSON’S MERCEDES W124

With a winning mentality and knack for selecting the best equipment, like Pioneer PRS, Lars Karlson is a true sound competition professional. A powerhouse in the Swedish and European championship scene since 1998, you can expect to see his new customised Mercedes dominating the expert class in the IASCA (International Auto Sound Challenge Association) and EMMA competitions. He’s already won two world titles in the Expert 600 watts class and scored highest in the Best Installation category at the EMMA 2002 finals. With the purest and highest sound quality Pioneer units in his car, he’s set to defend his titles for 2003.

DMITRY MATVEEV’S MINI COOPER

Only the best would do for this stylish little demo number — from installation to equipment, even to the car body paint job. And all of this was in the hands of Dmitry Matveev and the AM-Style Company. Matveev was the 2000 Europe Sound Contest champion in the professional class. When designing the sound system, he chose the hallmark DEX-P9R CD tuner, connected via an optical cable to the DEQ-P9 digital preamp/equaliser. Next step was adding TS-T3PRS tweeters and a TS-C1300R speaker system in the dashboard, TS-M7PRS mid-bass drivers in the doors, and topped it off with a TS-W12PRS subwoofer in the passenger compartment. PRS series amplifiers installed in the side walls complete the look, matching the chrome

steel cover plates. The entire system is perfectly integrated to complement the hip looks of the new Mini. No wonder it was a star at the MIMS 2002 Exposition in Moscow, and was lauded with a diploma from the Russian Designers Union.

57

AMPLIFIERS & SUBWOOFERS

s e r i o u s p o w e r,

s e r i o u s s o u n d

58

Go ahead. If you’re power hungry. For pure clean sound — and solid booming bass — you need to be. Feast

on these beauties. New Class-D amps rev up pure and clean power yet take up little space. New GM-X

2- and 4-channel amps pump power off the scale to top out your sound. Does more intense bass sound

tempting? Simply kit out a neat new enclosure sub. Better yet, try out one of Pioneer’s new SPL topping

subwoofers — fit to dominate the sound circuit. These subs break such new ground, the patents are

pending. Whichever way you go, you’ll get totally off.

59

		class-D amplifiers
GM-D500M	CLASS-D AMPLIFIER	NEW

1 x 1000 W (2 Ω)

1 x 600 W (4 Ω)

Max.

Pure intensity comes charging out of Pioneer’s first Class-D amplifier, the GM-D500M. With a sizzling 1000 W of maximum output power, the sound is overwhelmingly crisp thanks to the digital processing. Class-D amps require less electrical current which means less distorting heat throughout the system without bulky heat sink surfaces. With its powerful design and Pioneer technology, this compact amp fuels your subs and speakers for hyper-clean sound without distortion — at power levels

which have to be experienced to be believed.

•Max. output power: 1 x 1000 W (2 Ω) or 1 x 600 W (4 Ω)

•Continuous output power (14.4 V): 1 x 500 W (20 – 240 kHz/2 Ω), 1 x 300 W (20 – 240 kHz/4 Ω)

•1 x 490 W (4 Ω) or 1 x 630 W (2 Ω) (DIN 45324, +B = 14.4 V)

•2 Ω stable operation

•Variable LPF (Low Pass Filter) (40 – 240 Hz, -24 dB/oct.)

•PWM Regulated MOSFET power supply

•Bass Level control (-22 – +12 dB)

•High Voltage Input capability (125 mV – 6.5 V)

•Low load impedance capability (2 – 8 Ω)

•Large power/ground terminals (screw-type)

•RCA input terminals

•Chassis size (mm): 268 x 52 x 250

Technology Class-D Amplifiers

Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer’s GM-D500M and GM-D505 Class-D amps transform very little power into heat while a very high percentage of the power supply (67 %) is transferred into the load. This results in a very compact amp which needs little input power to produce very high output power.

CURRENT VS. POWER

	50
	40
(A)	30
Current	20

10

						Class-D
0						Class-AB
0	50	100	200	300	400	500

Power Output (Watt — 4 Ω)

High current	Front or rear
	speaker

+

BTT

Subwoofer

The high amplifier power required to drive a subwoofer causes unstable current and voltage, which not only goes to the subwoofer but also to the front and rear speakers. As a result, the sound quality is affected and distorted.

Low current	Front or rear
	speaker

+

BTT

Subwoofer

A Class-D amplifier needs only 2/3 of the current of a conventional amplifier, so the power supply to both subwoofer and front and rear speakers is more stable. As a result, the sound quality will not be affected, so you can enjoy a very clean sound output without distortion.

The Class-D amplifier’s PWM (Pulse Width Modulator) modulates the original audio input signal with another signal which has a much higher fixed frequency. The result is a digital signal which contains the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) will then filter out the 350 kHz frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.

The advantage of this amplification is that the power output FETs operate like a switch that is ‘on’ or ‘off’: when ‘on’, the FET acts like a closed switch, no voltage runs through its terminals, and no wasted power is transformed into heat.

This is why Pioneer’s Class-D amp’s heat sink can be kept very small, and a stable load can be pumped into your subs and speakers to create a maximum of undistorted, clear sound.

Input signal

Signal amplitude transfer to Pulse Width

PULSE WIDTH MODULATOR METHOD

Pulse Width Modulation

Circuit

+V

+ Amp

0

- Amp

-V

Output signal

A LPF (Low Pass Filter) cuts off the high frequency

60 for full specifications please see next page.

GM-D505

5-CHANNEL CLASS-D AMPLIFIER

NEW

4 x 100 W (4 Ω) +

1 x 300 W (4 Ω) or 1 x 600 W (2 Ω)

Max.

With the focus on sound precision as well as high power levels, Pioneer is proud to introduce the GM-D505. Setting a new standard of excellence, this 5-way Class-D amplifier delivers powerful and clear output through five channels: 4 analogue and 1 Class-D mono. This ingenious set-up — complete with Low Pass and High Pass Filters — lets you directly connect four speakers and a subwoofer for a maximum power output of 4 x 100 W plus 1 x 300 W. Highly efficient Class-D technology requires less electrical current. This means less heat generation or, in other words, a superb compact design packed with clean and distortion-free sound quality.

•Max. output power:

A/B channel: 4 x 100 W (4 Ω)

SUB channel: 1 x 300 W (4 Ω) or 1 x 600 W (2 Ω)

•Continuous output power (14.4 V):

A/B channel: 4 x 50 W (20 – 20 kHz/4 Ω),

SUB channel: 1 x 150 W (20 – 240 Hz/4 Ω) or 1 x 300 W (20 – 240 Hz/2 Ω)

•4 x 65 W (4 Ω) + 1 x 225 W (4 Ω) (DIN 45324, +B = 14.4 V) or 4 x 56 W (4 Ω) + 1 x 350 W (2 Ω) (DIN 45324, +B = 14.4 V)

•Variable LPF (Low Pass Filter) (40 – 240 Hz, -12 dB/oct.)

•Variable HPF (High Pass Filter) (40 – 240 Hz, -12 dB/oct.)

•PWM Regulated MOSFET power supply

•Bass Level control (-22 – +12 dB)

•High Voltage Input capability (200 mV – 6.5 V)

•Low load impedance capability: 4 Ω (A/B ch.: 4 – 8 Ω/SUB ch.: 2 – 8 Ω)

•Input selection: 2/4/6 channel

•Non-fading circuit

•Input level/gain control

•DMOSFET output sections

•Large power/ground terminals (screw-type)

•RCA input terminals

•Chassis size (mm): 350 x 52 x 268

Class-D Amplifiers – Specifications

DIN output power (DIN 45324, +B = 14.4 V)

Continuous output power (RMS) Watts 14.4 V (20 – 240 kHz/2 Ω)

(20 – 240 kHz/4 Ω)

(20 – 20 kHz/4 Ω)

Frequency Response (Hz)

(+o.5 dB, -3 dB) (+o dB, -1 dB)

Distortion (%)

(10 W/120 Hz)

(10 W/1 kHz)

S/N Ratio

High voltage input capability

Max. Current Consumption (A/4 Ω)

Chassis Size (W x H x D mm)

Unit Weight (kg)

GM-D500M		GM-D505
	A/B channel		SUB channel
1 x 490 W (4 Ω) or 1 x 630 W (2 Ω)	4 x 65 W (4 Ω)	+	1 x 225 W (4 Ω)
	4 x 56 W (4 Ω)	+	1 x 350 W (2 Ω)
1 x 500 W			1 x 300 W
1 x 300 W			1 x 150 W
	4 x 50 W
5 Hz – 240 Hz			5 Hz – 240 Hz
	10 Hz – 40 kHz
0.03 %			‹ 0.03 %
	‹ 0.01 %
100 dB		› 95 dB
125 mV – 6.5 V		200 mV – 6.5 V
31		43.8
268 x 52 x 250		350 x 52 x 268
2.9		3.9

61

bridgeable amplifiers

Ignite your system with the pulsating power of Pioneer’s latest bridgeable amplifiers. These GM-X amps are loaded with the highest power possible for clear sound reproduction thanks to full MOSFET power supplies and DMOS output sections. Choose between 2- or 4-channel amps to pump out masterful distortion-free sound from your subs and speakers.

GM-X574 4-CHANNEL BRIDGEABLE AMPLIFIER

NEW

4 x 100 W (2 x 260 W)

Max.

GM-X374 4-CHANNEL BRIDGEABLE AMPLIFIER

NEW

4 x 70 W (2 x 200 W) Max.

GM-X972 2-CHANNEL BRIDGEABLE AMPLIFIER

NEW

2 x 300 W (1 x 800 W)

Max.

GM-X572 2-CHANNEL BRIDGEABLE AMPLIFIER

NEW

2 x 150 W (1 x 400 W)

Max.

DMOSFET Output Sections and MOSFET Power Supplies

With full MOSFET-driven power supplies and new DMOS output sections, Pioneer’s new GM-X amplifiers are better than ever at delivering power! MOSFETs offer numerous advantages over conventional bipolar output devices, assuring peak power output without noise or distortion.

The GM-X amps now come equipped with a high-performance DMOSFET output section which enhances the amp’s high-frequency range performance and linear reponse to signals. So now you can drive your amp even harder, without compromising on the sound quality.

GM-X372 2-CHANNEL BRIDGEABLE AMPLIFIER

NEW

2 x 100 W (1 x 240 W)

Max.

Amplifiers – Features	GM-X574	GM-X374	GM-X972	GM-X572	GM-X372
LPF (-12 dB/Oct)			80 Hz	80 Hz	80 Hz
LPF/HPF Network (A and B channel) (-12 dB/Oct)	80 Hz	80 Hz
Input level/gain control	•	•	•	•	•
PWM Regulated MOSFET power supply	•	•	•	•	•
DMOSFET Output sections	•	•	•	•	•
Speaker level input (A and B channel)	•	•	•	•	•
Load impedance capability (2 – 8 Ω)	•	•	•	•	•
Large screw-type power/ground terminals	•	•	•	•	•
Screw-type speaker terminals	•	•	•	•	•
High-performance balanced isolator circuit	•	•	•	•	•
RCA input terminals	•	•	•	•	•
RCA output terminals	•	•

62 for full specifications please see next page.

bridgeable amplifiers

Amplifiers – Specifications

DIN output power (DIN 45324, +B = 14.4 V)

Continuous output power (RMS) Watts 14.4 V (20 – 20 kHz/4 Ω)

(20 – 20 kHz/2 Ω) (Bridged 4 Ω)

Frequency Response (Hz) (+o dB, -1 dB)

Distortion (%) (10 W/1 kHz)

S/N Ratio

High voltage input capability

Max. Current Consumption (A/4 Ω)

Chassis Size (W x H x D mm)

Unit Weight (kg)

GM-X574	GM-X374	GM-X972	GM-X572	GM-X372
4 x 70 W or 2 x 160 W	4 x 45 W or 2 x 100 W	2 x 200 W or 1 x 480 W	2 x 110 W or 1 x 300 W	2 x 70 W or 1 x 200 W
4 x 50 W	4 x 35 W	2 x 150 W	2 x 75 W	2 x 50 W
4 x 65 W	4 x 50 W	2 x 200 W	2 x 100 W	2 x 60 W
2 x 130 W	2 x 100 W	1 x 400 W	1 x 200 W	1 x 120 W
10 Hz – 45 kHz	10 Hz – 45 kHz	10 Hz – 50 kHz	10 Hz – 50 kHz	10 Hz – 50 kHz
0.008	0.008	0.008	0.008	0.008
97 dB	100 dB	100 dB	100 dB	100 dB
200 mV – 6.5 V	200 mV – 6.5 V	200 mV – 6.5 V	200 mV – 6.5 V	200 mV – 6.5 V
26.5	19.2	37.5	18.9	14.4
269 x 50 x 309	265 x 50 x 237	269 x 50 x 309	265 x 50 x 237	255 x 50 x 169
3.7	2.8	3.7	2.8	2

active crossover networks

Positioned between sound sources and amplifiers, Pioneer Crossover Networks are designed for extremely precise, clear sound reproduction. There’s a choice of models, and each one offers accurate adjustment of frequency crossover points to match the characteristics of subwoofers, midrange speakers and tweeters.

CD-635 3-WAY ELECTRONIC CROSSOVER NETWORK

• Variable crossover frequency (Mid and Low: 50 Hz – 200 Hz or 500 Hz – 2 kHz, High and Mid 3 kHz –

10 kHz) • Cut-off slope: -12 dB/oct. (all ranges) • Subwoofer and High-Range Phase Switches • Subwoofer output mode switch (Stereo/Mono) • Level Controller • Gold-plated RCA input/output terminals

CD-625 2-WAY ELECTRONIC CROSSOVER NETWORK

• LPF and HPF (50 – 200 Hz) • Cut-off slope: -12 dB/oct. • Variable crossover frequency (50 Hz – 200 Hz continuously variable) • Subwoofer Phase Switch • Variable Level Controller for subwoofer (between -15 and +15 dB) • Subwoofer output mode switch (stereo/mono) • Gold-plated RCA input/output terminals

CD-615 2-WAY ELECTRONIC CROSSOVER NETWORK

•LPF and HPF • Cut-off frequency (HPF: 80 Hz or flat; LPF: 80 Hz) • Cut-off slope: -12 dB/oct.

•Subwoofer output • RCA input and outputs terminals • In-line Noise Filter (Signal Ground Isolator)

amp/sub configuration examples

Below are a few examples of how to build an in-car sound system with an amplifier and subwoofer combination. These configurations match the capability of each subwoofer and amplifier, to maximise the potential of the system.

PRS-X340

PRS-X320

PRS-X220

GM-X574

GM-X374

	Full range	speakers		W121SPL-TS		WX20LP-TS x 2	W305C-TS x 2	or	W255C-TS x 2	Sub	FullRange Speakers
L					L	L				L
R				Sub		R				R
					R
Sub
	W121SPL-TS	or	W101SPL-TS			Stereo	Bridged Stereo			Bridged	WX205-TS
	Stereo			Bridged Mono

GM-X972

L

R

Stereo

TS-W121SPL x 2 or TS-W101SPL x 2

GM-X572

Sub

Bridged Mono

8 Ω Parallel

TS-W101SPL x 2 or TS-W121SPL x 2

GM-X372

Sub

Bridged Mono

TS-W304F or TS-W254F

GM-X372

Sub

L

R

Stereo

TS-WX205 TS-WX205

63

spl subwoofers

TS-W5000SPL

5000 W

Max.

i

Ø327	Ø278
	266

COMPETITION CLASS HIGH-QUALITY SPL SUWOOFER FOR PROFESSIONAL USE	NEW
30 CM DUAL VOICE COIL C-TYPE SUBWOOFER

The highest power performer for sonic connoisseurs looking for the ultimate in professional-class subwoofers, the TS-W5000SPL reaches an impressive 5000 W and +170 dB SPL (Sound Pressure Level). Starting from the concept of an SPL competition winner, Pioneer put two years of research and four patentpending designs into its development. The result is simply the best in its class regarding high power handling, louder output, SPL output capability and excellent bass response — and no “burn” at those crucial moments. Its pragmatic design minimises energy loss to achieve a perfect-targeted performance. This flagship model is a certain winner in the SPL World Record competition, as well as in your car.

TS-W5000SPL Cut View								2
													3
			1
								4
1. Interlaced Carbon Fibre Reinforced
	9
IMPP Cone*
2. 3-layer Aramid Fibre Woven Radial
Rubber Surround*
3. Wide-roll, Overhung Surround*
					6
4. Dual Ceramic-Coated Voice Coils*
5. Aluminium Die-Cast Basket with
											8
bottom hold structure
							7
6. Triple-stacked high power magnets

7.ADMG (Aero-Dynamic Magnetic Gap)

8.Extended and vented pole yoke

9. 8-gauge wire terminal	5
* Patent pending.

	Boost Linearity with ADMG
	The Aero-Dynamic Magnetic Gap (ADMG) of the	ADMG DESIGN
	TS-W5000SPL is designed to overcome mechanical
	and air pressure resistance typical in the +170 dB	The air channels reduce the
	environment. Each pole piece and top plate has an
	air channel in a narrow magnetic gap, which	mechanical resistance by
		more than 10 %.
	effectively reduces physical resistance by over 10 %.
	This leads to greatly improved linearity at high
	power input.

Get More SPL with the Overhung Surround

To boost SPL output, Pioneer engineers faced the challenge of increasing the cone surface area while keeping the same size. The result is Pioneer’s new patentpending overhung surround design for the TS-W5000SPL. The wide-roll surround extends over the typical gasket area, creating 22 % more cone surface, closer to a 38 cm subwoofer. More moving surface area achieves the higher sound pressure levels you need to come out ahead.

Surround joins basket on inside rim	Overhung surround joins basket
	near outer rim

CONE AND	Allows cone with
SURROUND	larger diameter
STRUCTURE	Wide-roll, overhung surround
Traditional surround
configuration	configuration

No “Burn” with Dual Ceramic-coated Voice Coils

To prep the TS-W5000SPL for +170 dB SPL drag races, Pioneer developed a new patent-pending Ceramic-Coated Voice Coil wire that doubles the power handling capability compared to conventional voice coils. There’s no overheating thanks to the superb insulation properties of the ceramic coating, thus no short circuits or “burn”. You can count on this sub to perform up to par and deliver a winning moment — time after time.

								adhesive layer	DUAL CERAMIC-COATED VOICE COIL
								ceramic thermal	STRUCTURE
								insulation
								electrical
								insulation	In the TS-W5000SPL an additional layer of
								copper wire	ceramic compound is used to guard against
									thermal breakdown. This more than doubles
									power handling.

64 for full features and specifications please see page 66.

Long Carbon fibre weave

		TS-W121SPL		HIGH-QUALITY SPL SUBWOOFER
					NEW
				30 CM DUAL VOICE COIL C-TYPE SUBWOOFER
				Loads of decibels combined with solid power make the TS-W121SPL a force to be reckoned with. This high-
		2000 W
		Max.		quality subwoofer weighs in at +165 dB with a thumping 2000 W maximum power output. Borrowing some of
				the innovative ideas from its older brother, the TS-W5000SPL, this 30 cm subwoofer features a Glass

ifibre/Carbon fibre reinforced IMPP cone and a die-cast aluminium basket. With all of this and more, the TS-W121SPL has what it takes for your next SPL competition, or perhaps your next trip around the block!

Ø278

Ø329 175

The Right Stuff: Interlaced Fibre Reinforced IMPP Cone

An extremely rigid yet lightweight cone is vital to prevent cone failure at high sound pressure levels. Pioneer’s new patent-pending IMPP cone meets this need perfectly. It incorporates a proprietary composite blend of long carbon fibres for the TS-W5000SPL, glass fibres/carbon fibres for the TS-W121SPL and TS-W101SPL or Aramid fibres for the TS-W305C and TS-W255C. The fibres interlace

together to form an exceptionally resilient fibre weave, which provides the strength and rigidity for low distortion, clean and extremely powerful bass. The stuff that champions are made of!

High dB Durability: 3-layer Fibre Woven Radial Surround

The whole range of new Pioneer subs is outfitted with a patent-pending 3-layer Fibre Woven Radial Surround design. The surround consists of two outer layers (rubber for the TS-W5000SPL) and one inner layer of interwoven fibre (Aramid fibre for the TS-W5000SPL) with a honeycomb weave for even distribution throughout the surround material. This eliminates weak points and improves the high power capability for an extremely durable and resilient surround that resists puckering, even under the extreme power conditions of SPL competitions.

3-layer fibre woven radial surround: an extremely durable and highperformance radial surround

Massive Force of the High Power Motor Assembly

The huge triple-stacked motor assembly of the TS-W5000SPL uses three massive, power-packing magnets — at 3 kg each — to drive the voice coil and cone with incredible force, moving the cone assembly as hard as possible to overcome the tremendous air pressure resistance experienced in world class SPL (+170 dB) competitions. The TS-W121SPL and TS-W101SPL feature a double-stacked magnet assembly; the TS-W305C and TS-W255C models feature a dual mass magnet assembly which also provides exceptional force for superior bass. Either way you go, these subs really stack up!

Solid Support: Aluminium Die-cast Basket with Bottom Hold Structure

During high SPL levels, the motor assembly is placed under extreme pressure. So Pioneer developed an exclusive aluminium die-cast basket which securely supports the motor. This basket structure prevents any unwanted flex or vibration that can cause energy loss and reduce overall performance. A solid winner!

Aluminium die-cast basket structure

for full features and specifications please see page 66.

65

					spl subwoofers
		TS-W101SPL		HIGH-QUALITY SPL SUBWOOFER
						NEW
				25 CM DUAL VOICE COIL C-TYPE SUBWOOFER
				A big fan of SPL? Then the TS-W101SPL may be your winning ticket. The high SPL capability — up to 165 dB
		1500 W
		Max.		— will charge your system with intense power and maximum force. Power output checks in at a heady
				1500 W. Based on the same technology found in the TS-W5000SPL competition model, this subwoofer is filled

iwith quality material including a wide-roll, 3-layer fibre woven radial surround. Get ready to rock the block!

Ø238

Ø282 162

1

2

3

6

8

5

4

7

9

TS-W121SPL Cut View

1. Wide-roll, 3-layer fibre woven radial surround — 2. Interlaced Glass Fibre/Carbon Fibre Reinforced IMPP Cone — 3. Moulded gasket — 4. Double-stacked high power magnet — 5. 4-layer copper round wire voice coil — 6. Conex damper — 7. Extended and vented pole yoke

— 8. Silver binding post terminal — 9. Aluminium die-cast basket with bottom hold structure

Dual Voice Coil Subwoofers

The flexible wiring configurations of the Dual Voice Coil (DVC) subwoofers when used in combination with a low load impedance compatible amplifier, can give an even bigger and more powerful bass reproduction capability. DVC subwoofers have 2 voice coils, of 4 ohm impedance each. Connect the voice coils in parallel for the power of a 2 ohm subwoofer or connect them in series and get an 8 ohm subwoofer. These in turn allow various installation configurations, enabling the creation of a truly superior system.

Additionally, some headunits can combine MOSFET 50 W x 4 with the Crossover Network (Low Pass Filter) of the EEQ (Easy EQ) Plus system, enabling you to connect these subwoofers without amplifiers.

SPL Subwoofers

Interlaced Carbon Fibre Reinforced IMPP cone

Interlaced Glass Fibre/Carbon Fibre Reinforced IMPP cone

3-layer, Aramid fibre woven radial rubber surround

Wide-roll, overhung surround design

Wide-roll, 3-layer fibre woven radial surround

Triple-stacked high power magnets

Double-stacked high power magnets

Dual ceramic-coated voice coils

ADMG (Aero-Dynamic Magnetic Gap) design

Aluminium die-cast basket with bottom hold structure

Extended and vented pole yoke

Large diameter Conex double damper with dual damper ring

Large diameter Conex damper with damper ring

8-gauge wire terminal

Silver binding post terminal

Dual 4 ohm voice coils design (2 or 8 ohm)

Enclosure use

Frequency response

Lowest Resonance Frequency (Fs)

Qts

Recommended Sealed Enclosure (Litres) (± 10 %)

Vas (Litres)

Sensitivity (1 W/1 m)

Nominal input power

TS-W5000SPL	TS-W121SPL	TS-W101SPL
30 cm
	30 cm	25 cm
•
•
	•	•
•
(3 x 3 kg)
	•	•
•
•
•	•	•
•	•	•
•
	•	•
•
	•	•
•	•	•
•	•	•
18 – 2,000 Hz	18 – 2,000 Hz	18 – 2,500 Hz
32 Hz	30 Hz	37 Hz
0.32	0.328	0.376
42.5	42.5	28.3
30.92	34.53	17.54
88 dB	89 dB	87 dB
2000 W	750 W	600 W

66