Hand dryer
MODEL
JT-SB216JSH-W-E Heater Model JT-SB216JSH-H-E JT-SB216JSH-S-E
JT-SB216KSN-W-E Heater-less Model
Appliance color -W(White), -H(Dark grey), -S(Silver)
1109875HD4101
GB
Model Name Display Position Power voltage display position.
Single-phase 220-240VAC
INSTALLATION MANUAL |
|
For Dealers and Installers |
|
|
|
Read this manual thoroughly before beginning installation to ensure the appliance is installed safely and correctly.
Local installation standards should be obeyed and installation should be performed by the dealer or a qualified professional.
The "INSTRUCTION MANUAL" is for the customer. Be sure to hand it to the customer.
INDEX
Safety Precautions …………………………………………………… 2 Pre-installation checks ……………………………………………… 3
■ Checking the installation environment………………………………… 3
■ Checking the appliance, accessories, and items required for installation … 3
Names of parts and external dimensions ………………………… 4 Installation conditions ………………………………………………… 5
■ Required space for installation ……………………………………… 5
■ Suitable walls ……………………………………………………… 5
■ Making the appliance easier to use ………………………………… 5
Installation method ……………………………………………… 6~10
Test Run ……………………………………………………………… 11
1
Safety Precautions
Warning |
The following may lead to death or serious personal |
injury if the appliance is handled incorrectly. |
|
|
|
•Do not install in locations where salt damage may occur, or where corrosive, neutral, or reductive
|
gases are present. |
|
• Electrical wiring work should be done by a certified |
||
|
This may cause malfunctions. |
|
professional in conformance with the technical |
||
|
• Do not scratch, damage, process, excessively |
|
standards for the equipment or official standards. |
||
Prohibited |
bend, pull, twist or bundle the power cable, and |
|
Incorrect wiring can cause electric shocks and fires. |
||
do not place heavy objects onto it or trap it. |
|
• Use single-phase 220-240V power. |
|||
|
|
||||
|
Doing so may damage the power cable, causing fires or |
|
Using the incorrect power supply may cause fires, electric |
||
|
electric shocks. |
|
|||
|
|
shocks or malfunctions. |
|||
|
|
|
|
||
|
|
|
|
• Use exclusive wiring |
|
|
• Do not attempt any disassembly or modification |
Follow |
|||
|
Using this appliance with other devices on a branch |
||||
|
of the appliance that is not expressly stated in this |
||||
|
manual. |
instructions |
socket may cause abnormal heat, which may cause fires. |
||
Do not |
|
||||
Doing so may result in fires, electric shocks or injuries. |
|
• Be sure to install a ground-fault circuit interrupter. |
|||
disassemble |
|
||||
|
|
|
|
Not doing so may result in electric shocks. |
|
|
• Do not use in a hot location such as a shower |
|
|||
|
|
• A means for disconnection must be incorporated |
|||
|
room, where condensation may form on the |
|
|||
|
|
in the fiixed wiring in accordance with the wiring |
|||
|
appliance, or where water may splash directly |
|
|||
Do not use in the |
|
rules. |
|||
onto the appliance. |
|
||||
bathroom/ |
|
|
|
||
This may cause electric shocks or malfunctions. |
|
|
|
||
shower room |
|
|
|
||
|
|
|
|
||
|
|
Cautions property if the appliance is handled incorrectly. |
|
||
|
|
The following may lead to injury or damage to |
|
||
|
|
|
|
|
|
|
|
|
|
• Install securely in a location strong enough to |
|
|
• Do not install when the product (power cable) is |
|
support the weight of the appliance. |
||
|
electrified. |
|
Injuries may be caused if the appliance falls off the wall. |
||
Prohibited |
Doing so may result in electric shocks. |
Follow |
• Wear gloves when installing the appliance. |
||
|
|
|
instructions |
Not doing so may result in injuries. |
|
|
|
|
|
||
|
|
|
|
|
|
2
Pre-installation checks
■ Checking the installation environment
Do not install in the following types of location.
(This may cause malfunctions.)
• Outdoors • Locations where the temperature could be lower than 0ºC. • Locations where there is a lot of dust
• Locations where the temperature could be higher than 40ºC • Locations where there is a lot of condensation
• Locations where salt damage could occur • Vehicles (including ships and airplanes)
• Locations where corrosive, neutral, or reductive gases are present
• Near food or tableware • Kitchens • Locations where the appliance may come into direct contact with water
(Where there is a risk of water splashing)
•Locations where the appliance is direct sunlight or strong light.
(May cause the sensor to malfunction)
•Rooms that have a sterilization basin, swimming pools, bathrooms.
■ Check the appliance, accessories, and items required for installation
Product |
Accessories |
Mounting screws (5 x 30 Type 1 tapping screws)… 6
|
Installation panel…1 |
|
Cord clip …1 |
Main unit |
Clip mounting screw…1 |
Drain tank |
Ferrite core…1 |
Air filter |
Switch door screw…1 |
|
Required items
Screwdriver
Longer than 150mm
■ Prepare if required
Single wire for internal wiring (Cable core: between 1.0mm2 and 2.5mm2)
Not needed if the internal wiring is complete
Pen
To mark position to insert metal screw plugs in the wall
SCREW ANCHOR…6 |
Wall reinforcement |
Use on concrete walls |
Reinforces walls made |
|
of materials other than |
|
concrete |
■ Check the heater settings and air speed settings (JT-SB216JSH type only)
Check the heater ON/OFF settings and air speed HIGH/STANDARD settings with the customer beforehand.
(The customer cannot adjust the settings after installation is complete.)
3
Names of parts and external dimensions
168
Terminal block
80
263
10 |
267 |
393 |
Power cable hole |
(rear) |
Terminal block
Drain tank |
68 |
|
|
Air filter (air intake) |
79.5 103.5 |
|
|
|
300 |
219 |
2 |
77 |
93 |
Installation |
50 (Insertable dimensions) |
panel |
|
670 |
|
658 |
|
|
|
|
189 |
Maximum width |
Unit (mm) |
of main unit |
|
■ Front |
Power control section |
|
|
|
Switch door |
Power
ON
OFF
Power switch
Display |
Heater type |
Power |
Heater |
|
|||
|
(JSH) |
Power lamp |
Heater lamp |
|
|
Terminal block
Front panel
Front panel mounting screws
Heater-less type Power |
Check |
|
(KSN) |
Power lamp |
Check lamp |
|
■ Rear
Power cable hole
Clip hole
4