Advanced Data Logging Application
Quick Start
Go to www.mccdaq.com/DAQami for information on how to purchase the software. Install the software, and perform the following steps to acquire, display, and log data.
Connect MCC DAQ hardware to a computer, and a signal source to analog input (AI) channels 0–3 (skip this step to acquire data with the DAQami Simulated Device).
Launch DAQami software.
Choose New Configuration and select
Automatic. The connected device or Simulated Device, AI channels 0–3, and the Strip display are added to the configuration.
Click Start.
Acquired data is plotted on the Strip display.
Refer to the DAQami Help for detailed information about how to modify acquisition settings, customize each display, and export logged data.
Measurement Computing Corporation 10 Commerce Way
Norton, MA 02766
(T) 508-946-5100 (F) 508-946-9500 www.mccdaq.com
Loading...