MDE SA10, SA100A, SA11, SA100, SA10A, SA110, SA120A, SA110A, SA12, SA11A, SA120, SA12A, SA13, SA130A, SA130, SA14A, SA13A, SA14, SA15A, SA150, SA150A, SA15, SA160A, SA160, SA16, SA16A, SA170A, SA17, SA18, SA17A, SA170, SA180, SA180A, SA20A, SA18A, SA20, SA22A, SA24, SA24A, SA26, SA26A, SA28A, SA30, SA28, SA30A, SA33, SA33A, SA36, SA36A, SA45, SA43, SA43A, SA40A, SA45A, SA48A, SA48, SA5.0, SA51, SA51A, SA5.0A, SA54A, SA6.0, SA58, SA6.0A, SA6.5, SA58A, SA6.5A, SA64, SA64A, SA7.5, SA7.0A, SA7.0, SA7.5A, SA78A, SA78, SA8.0, SA8.0A, SA8.5, SA8.5A, SA9.0, SA9.0A Datasheet

Loading...

MDE Semiconductor, Inc.

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414

SA5.0 THRU SA180CA

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180.0 Volts

500 Watt Peak Pulse Power

FEATURES

Plastic package has Underwriters Laboratory Flammability Classification 94 V-O

Glass passivated junction

500W Peak Pulse Power

capability on 10/1000 µs waveform

Glass passivated junction

Low incremental surge resistance

Excellent clamping capability

Repetition rate (duty cycle): 0.01%

Fast response time: typically less than

1.0ps from 0 volts to BV for unidirectional and 5.0ns for bidirectional and 5.0ns for bi directional

Typical IR less than 1µA above 10V

High temperature soldering guaranteed:

300°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-15 Molded plastic over glass passivated junction

Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026

Polarity: Color band denoted positive end (cathode) except Bipolar

Mounting Position: Any Weight: 0.015 ounces, 0.4 grams

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types SA5.0 thru types SA180 (e.g. SA5.0C, SA180CA) Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

RATING

SYMBOL

VALUE

UNITS

Peak Pulse Power Dissipation on 10/1000 µs

Pppm

Minimum 500

Watts

waveform (NOTE 1, Fig.1)

 

 

 

Peak Pulse Current of on 10/1000 µs waveform (Note 1)

Ippm

SEE TABLE 1

Amps

Steady State Power Dissipation at TL = 75°C

Pm(AV)

3.0

Watts

Lead lengths .375", 9.5mm (Note 2)

 

 

 

Peak Forward Surge Current, 8.3ms Single Half Sine-wave

IFSM

70

Amps

Superimposed on Rated Load, Unidirectional only

(JEDEC Method)(Note 3)

 

 

 

Operatings and Storage Temperature Range

Tj, Tstg

-55 +175

°C

NOTES:

 

 

 

1.

Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.

2.

Mounted on Copper Pad area of 1.6x1.6" (40x40mm) per Fig.5.

3.

8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. 8/6/2002

MDE SA10, SA100A, SA11, SA100, SA10A, SA110, SA120A, SA110A, SA12, SA11A, SA120, SA12A, SA13, SA130A, SA130, SA14A, SA13A, SA14, SA15A, SA150, SA150A, SA15, SA160A, SA160, SA16, SA16A, SA170A, SA17, SA18, SA17A, SA170, SA180, SA180A, SA20A, SA18A, SA20, SA22A, SA24, SA24A, SA26, SA26A, SA28A, SA30, SA28, SA30A, SA33, SA33A, SA36, SA36A, SA45, SA43, SA43A, SA40A, SA45A, SA48A, SA48, SA5.0, SA51, SA51A, SA5.0A, SA54A, SA6.0, SA58, SA6.0A, SA6.5, SA58A, SA6.5A, SA64, SA64A, SA7.5, SA7.0A, SA7.0, SA7.5A, SA78A, SA78, SA8.0, SA8.0A, SA8.5, SA8.5A, SA9.0, SA9.0A Datasheet

MDE Semiconductor, Inc.

78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414

RATING AND CHARACTERISTIC CURVES SA5.0 THRU SA180CA

8/6/2002

+ 2 hidden pages