MDE 1N6376, 1N6375, 1N6374, 1N6373, 1N6383, 1N6382, 1N6381, 1N6380, 1N6379, 1N6378, 1N6377, 1N6389, 1N6388, 1N6387, 1N6386, 1N6385, 1N6384, ICTE-10, ICTE-10C, ICTE-12, ICTE-12C, ICTE-5, ICTE-8, ICTE-8C, ICTE-15, ICTE-15C, ICTE-18, ICTE-18C, ICTE-22, ICTE-22C, ICTE-36, ICTE-36C, ICTE-45, ICTE-45C, MPTE-5, MPTE-8, MPTE-8C, MPTE-15C, MPTE-18, MPTE-12C, MPTE-15, MPTE-36, MPTE-36C, MPTE-22C, MPTE-18C, MPTE-22, MPTE-10C, MPTE-10, MPTE-45C, MPTE-12 Datasheet

Loading...
MDE 1N6376, 1N6375, 1N6374, 1N6373, 1N6383, 1N6382, 1N6381, 1N6380, 1N6379, 1N6378, 1N6377, 1N6389, 1N6388, 1N6387, 1N6386, 1N6385, 1N6384, ICTE-10, ICTE-10C, ICTE-12, ICTE-12C, ICTE-5, ICTE-8, ICTE-8C, ICTE-15, ICTE-15C, ICTE-18, ICTE-18C, ICTE-22, ICTE-22C, ICTE-36, ICTE-36C, ICTE-45, ICTE-45C, MPTE-5, MPTE-8, MPTE-8C, MPTE-15C, MPTE-18, MPTE-12C, MPTE-15, MPTE-36, MPTE-36C, MPTE-22C, MPTE-18C, MPTE-22, MPTE-10C, MPTE-10, MPTE-45C, MPTE-12 Datasheet

MDE Semiconductor, Inc.

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414

ICTE5.0 to ICTE15C MPTE-5 to MPTE-45 1N6373 to 1N6381 and 1N6382 to 1N6389

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V

1500 Watt Peak Power

FEATURES

Plastic package has Underwriters Laboratory Flammability Classification 94 V-O

Glass passivated chip junction in Molded Plastic package

1500W surge capability at 1ms

Excellent clamping capability

Low zener inpedance

Fast response time: typically less than

1.0ps from 0 volts to BV min.

Typical IR less than 1µA above 10V

High temperature soldering guaranteed:

250°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension

• Includes 1N6373 thru 1N6385

MECHANICAL DATA

Case: JEDEC DO-201 Molded plastic Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026

Polarity: Color band denoted positive end (cathode) except Bipolar

Mounting Position: Any

Weight: 0.045 ounces, 1.2 grams

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

RATING

SYMBOL

VALUE

UNITS

Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms

Pppm

Minimum 1500

Watts

(NOTE 1)

 

 

 

Peak Pulse Current of on 10/1000 µs waveform (Note 1)

Ippm

SEE TABLE 1

Amps

Steady State Power Dissipation at TL = 75°C

Pm(AV)

5.0

Watts

Lead lengths .375", 9.5mm (Note 2)

 

 

 

Peak Forward Surge Current, 8.3ms Single Half Sine-wave

IFSM

200

Amps

Superimposed on Rated Load, (JEDEC Method)(Note 3)

 

 

 

Maximum instantaneous forward voltage at 100A for

Vf

3.5

Volt

unidirectional only

 

 

 

Operatings and Storage Temperature Range

Tj, Tstg

-55 +175

°C

NOTES:

1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.

2.Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.

3.8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.

8/6/2002

+ 1 hidden pages