MDE 5KP Datasheet

MDE Semiconductor, Inc.

V

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: [phone] • Fax: [phone]

5KP SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180 Volts

5000 Watt Peak Pulse Power

FEATURES MECHANICAL DATA

The devices listed in this document take the

• Glass passivated junction following physical form:

• 5000W Peak Pulse Power
capability on 10/1000 µs waveform

• Glass passivated junction

• Low incremental surge resistance

• Excellent clamping capability

• Repetition rate (duty cycle): 0.05%

• Fast response time: typically less than

1.0 ps from 0 volts to BV

• Typical IR less than 1µA above 10V

5KP TVS Cells: Assembled with 220mm Hex Die
Max. Height 2.5mm, 0.100 Inch
Max. Dia 7.6mm, 0.300 inch

Diameter

Height

All dice are passivated either glass or SiO2

These cell TVS devices are specially designed for TVS

modules and hybrid circuit applications. The benefit

of this package is less space and easier assembly

Users should be cautioned that the assembled

modules must be properly protected to avoid the

glass or Si02 passivated die damage.

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP180 (e.g. 5KP5.0C, 5KP180CA)

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

RATING SYMBOL

Peak Pulse Power Dissipation on 10/1000 µs
waveform

Peak Pulse Current of on 10/1000 µs waveform
Steady State Power Dissipation at
Lead lengths .375", 9.5mm
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load,
Operatings and Storage Temperature Range Tj, Tstg -55 +175 °C
NOTES:

1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.

2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.

3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.

(NOTE 1, Fig.1)

(Note 1,Fig 3)

TL = 75°C

(Note 2)

(JEDEC Method)(Note 3)

Pppm

Ippm SEE TABLE 1 Amps

m(AV)

P

IFSM

ALUE UNITS

Minimum 5000 Watts

8.0

400 Amps

Watts

10/7/2002