Maytag AGR5712ADB-Q-S-W, CGR1110ADQ-W, AGR4412ADB-Q-S-W, CPL1100ADH-L-Q-T-W, CPR1100ADQ-W User Manual

...
0 (0)

Service

This manual is to be used by qualified appliance technicians only. Maytag does not assume any responsibility for property damage or personal injury for improper service procedures done by an unqualified person.

Freestanding

Gas Range

This Base Manual covers general information

Refer to individual Technical Sheet for information on specific models

This manual includes, but is not limited to the following:

AGR4400ADW

AGR4412ADB/Q/S/W

AGR5712ADB/Q/S/W

CPL1100ADH/L/Q/T/W

CPL1110ADH/L/T

CPR1100ADQ/W

CGL1100ADQ/W

CGR1110ADQ/W

CGR1125ADQ/W

CGR1415ADH

CGR1425ADH/Q/S/T/W

CGR3725ADB/Q/S/W

CG31200ADQ/V/W

CG31400ADW

CG31600ADB/Q/V

CG34800ADQ/S/T/V/W

CP31200ADV

CP31600ADQ/V

LGR3330ADB/W

LPR1115ADW

MGR5751ADB/Q/W/S

MGR5752ADW

MGR4451ADB/Q/W/S

MGR4452ADB/Q/W

PGR4420LDQ/W

PGR5720LDQ/W

16023522 December 2004

©2004 Maytag Services

Important Information

Pride and workmanship go into every product to provide our customers with quality products. It is possible, however, that during its lifetime a product may require service. Products should be serviced only by a qualified service technician who is familiar with the safety procedures required in the repair and who is equipped with the proper tools, parts, testing instruments and the appropriate service information. IT IS THE TECHNICIANS RESPONSIBILITY TO

REVIEW ALL APPROPRIATE SERVICE INFORMATION BEFORE BEGINNING REPAIRS.

Important Notices for Servicers and Consumers

!WARNING

To avoid risk of severe personal injury or death, disconnect power before working/servicing on appliance to avoid electrical shock.

To locate an authorized servicer, please consult your telephone book or the dealer from whom you purchased this product. For further assistance, please contact:

Customer Service Support Center

CAIR Center

 

Web Site

Telephone Number

WWW.AMANA.COM ................................................

1-800-843-0304

WWW.MAYTAG.COM .............................................

1-800-688-9900

CAIR Center in Canada ...........................................

1-800-688-2002

Amana Canada Product ...........................................

1-866-587-2002

Recognize Safety Symbols, Words, and Labels

!DANGER

DANGER—Immediate hazards which WILL result in severe personal injury or death.

!WARNING

WARNING—Hazards or unsafe practices which COULD result in severe personal injury or death.

!CAUTION

CAUTION—Hazards or unsafe practices which COULD result in minor personal injury, product or property damage.

2

16023522

©2004 Maytag Services

Table of Contents

 

Important Information ....................................................

2

Important Safety Information

 

Safety Practices for Servicer ....................................

4

Servicing ..................................................................

4

Receiving Oven ........................................................

5

Using the Oven ........................................................

5

Baking, Broiling, and Roasting .................................

6

Connecting Range to Gas ........................................

6

Electrical Requirements ...........................................

6

Extenstion Cord .......................................................

6

Product Safety Devices ............................................

6

General Information

 

Cooking Nomenclature .............................................

7

Specifications ..........................................................

8

Placement of the Oven .............................................

8

Do Not Block Air Vents ............................................

8

Location of Model Number ........................................

8

Model Identification ..................................................

8

Service .....................................................................

8

Parts and Accessories .............................................

8

Extended Service Plan .............................................

8

Grounding ................................................................

9

Range Description ...................................................

10

Troubleshooting Procedures ........................................

11

Testing Procedures

 

Component Testing Procedures ..............................

14

M1 Oven Control Testing .........................................

16

Quick Test Mode .....................................................

17

Description of Error Codes ......................................

17

Disassembly Procedures

 

Removing and Replacing Range ..............................

20

Maintop Assembly ..................................................

20

Front Control Panel .................................................

20

Control Panel ..........................................................

20

Control Board Assembly .........................................

20

Rocker Switch .........................................................

20

Top Surface Valve and Spark Switch .......................

20

Sealed Burner .........................................................

20

Open Burner ...........................................................

21

Oven Sensor ...........................................................

21

Bake Burner and Ignitor ...........................................

21

Broil Burner and Ignitor ............................................

21

Valve/Regulator Assembly ......................................

21

Manual Oven Door Latch Assembly ........................

21

Spark Module ..........................................................

21

Oven Door Removal .................................................

21

Oven Door Hinge Reciever .......................................

22

Side Panel Removal ................................................

22

Backguard ..............................................................

22

Storage Drawer Removal .........................................

22

Storage Drawer Track Removal ...............................

22

Warming Drawer Removal .......................................

22

Warming Drawer Element .......................................

22

Convenience Outlet/Circuit Breaker

 

(Canadian Models Only) ..........................................

22

Oven Light Assembly ..............................................

23

Power Cord .............................................................

23

Frameless Door Disassembly

 

(Large and Standard Windows) ...............................

23

Frameless Oven Door ..............................................

24

Door Disassembly (No Window) .............................

25

Appendix A: Installation Instructions

 

Models CP31200AD*, CG31200AD* .....................

A-2

Models CPL1100AD*, CGL1100AD* .....................

A-4

Model LPR1115AD* ..............................................

A-6

Models CPL1100AD*, CGL1100AD*,

 

CP31200AD*, CG31200AD*, LPR1115AD* ........

A-8

All models except CP31200AD*, CG31200AD*,

 

CPL1100AD*, CGL1100AD*, LPR1115AD* ........

A-9

Appendix B: Use and Care

 

Models CP31200AD*, CG31200AD*,

 

CPL1100AD*, CGL1100AD* ...............................

B-2

Models CPR1100AD*, CGR1110AD*,

 

CGL1100AD*, CGR1415AD*, CGR1425AD*,

 

CGR3725AD*, CP31200AD*, CG31200AD*,

 

CG31400AD*, CP31600AD*, CG31600AD*,

 

CG34800AD* .....................................................

B-4

Models AGR4400AD*, AGR4412AD*,

 

AGR5712AD*, MGR4451AD*, MGR4452AD*,

 

MGR575*AD*, PGR4420LD*, PGR5720LD* .......

B-7

Care and Cleaning ...............................................

B-10

Appendix C: LP/Natural Gas Conversion

 

Models CP31200AD*, CG31200AD* .....................

C-2

Models CPL1100AD*, CGL1100AD* .....................

C-4

Model CPR1100AD* ..............................................

C-5

Model LPR1115AD* ..............................................

C-8

Models AGR5712AD*, CG34800AD*,

 

CGR3725AD*, MGR5751AD*, MGR5752AD*,

 

PGR5720AD* .....................................................

C-9

Models AGR4400AD*, AGR4412AD*,

 

MGR4451AD*, MGR4452AD*, PGR4420LD*,

 

CGR1425AD*, CGR1415AD*, CGR1110AD*,

 

CP31600AD*, CG31400AD* .............................

C-12

©2004 Maytag Services

16023522

3

Important Safety Information

Recognize this symbol as a safety precaution.

!

!WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

Extinguish any open flame.

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by an authorized installer, service agency or gas supplier.

!W ARNING

Due to the nature of cooking, fires can occur as a result of overcooking or excessive grease. Although a fire is unlikely, if one occurs proceed as follows:

Oven Fires

1.Do not open the oven door.

2.Turn all controls to the OFF position.

3.As an added precaution turn off the electricity at the main circuit breaker or fuse box and the gas at the main supply valve.

4.Allow the food or grease to burn itself out in the oven.

If smoke or fire persist call the local fire department.

To avoid risk of property damage or personal injury do not obstruct the flow of combustion or ventilation air to the oven.

To avoid risk of electrical shock, serious personal injury or death: Verify the oven has been properly grounded and always disconnect the electrical supply before servicing this unit.

!WARNING

To avoid risk of electrical shock, property damage, personal injury or death; verify wiring is correct, if components were replaced. Verify proper and complete operation of unit after servicing.

This gas appliance contains or produces a chemical or chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. To reduce the risk from substances in the fuel or from fuel combustion make sure this appliance is installed, operated, and maintained according to the instructions in this manual.

NOTE: The maximum gas supply pressure for these models must not exceed 14 inches W.C.P.

Safety Practices for Servicer

Safe and satisfactory operation of gas ranges depends upon its design and proper installation. However, there is one more area of safety to be considered:

Servicing

Listed below are some general precautions and safety practices which should be followed in order to protect the service technician and consumer during service and after service has been completed.

1.Gas smell—Extinguish any and all open flames and open windows.

2.Turn gas off—Service range with gas turned off unless testing requires it.

3.Checking for gas leaks—Never check for leaks with any kind of open flame. Soap and water solution should be used for this purpose. Apply solution to suspected area and watch for air bubbles which indicates a leak. Correct leaks by tightening fittings, screws, connections, applying approved compound, or installing new parts.

4

16023522

©2004 Maytag Services

Important Safety Information

4.Using lights—Use a hand flashlight when servicing ranges or checking for gas leaks. Electric switches should not be operated where leaks are suspected. This will avoid creating arcing or sparks which could ignite the gas. If electric lights are already turned on, they should not be turned off.

5.Do not smoke—Never smoke while servicing gas ranges, especially when working on piping that contains or has contained gas.

6.Check range when service is completed—After servicing, make visual checks on electrical connection, and check for gas leaks. Inform consumer of the condition of range before leaving.

7.Adhere to all local regulations and codes when performing service.

Receiving Oven

Installer needs to show consumer location of the range gas shut-off valve and how to shut it off.

Authorized servicer must install the range, in accordance with the Installation Instructions. Adjustments and service should be performed only by authorized servicer.

Plug range into a 120–volt grounded outlet only. Do not remove round grounding prong from the plug. If in doubt about grounding of the home electrical system, it is consumers responsibility and obligation to have an ungrounded outlet replaced with a properly grounded three-prong outlet in accordance with the National Electrical Code. Do not use an extension cord with this appliance.

Insure all packing materials are removed from the range before operating it, to prevent fire or smoke damage should the packing material ignite.

Ensure range is correctly adjusted by a qualified service technician or installer for the type of gas (Natural or LP). Some ranges can be converted for use with Natural or LP gas.

With prolonged use of a range, high floor temperatures could result. Many floor coverings will not be able to withstand this kind of use. Never install range over vinyl tile or linoleum that cannot withstand high temperatures. Never install range directly over carpeting.

Using the Oven

Do not leave children alone or unattended where a range is hot or in operation. They could be seriously burned.

Do not allow anyone to climb, stand or hang on the door. They could damage the range and cause severe personal injury.

Wear proper apparel. Loose fitting or hanging garments should never be worn when using oven. Flammable material could ignite if brought in contact with flame or hot oven surfaces which may cause severe burns.

Never use range for warming or heating a room. This may cause burns, injuries, or a fire.

Do not use water on grease fires.

Do not let grease or other flammable materials collect in or around range.

Do not repair or replace any part of range unless it is recommended in this manual.

Use only dry potholders. Moist or damp potholders used on hot surfaces may result in a burn from steam. Do not let a potholder touch the flame. Do not use a towel or a bulky cloth as a potholder.

Never leave range unattended while cooking. Boilovers can cause smoking and may ignite.

Only certain types of glass/ceramic, earthenware, or other glazed utensils are suitable for oven use. Unsuitable utensils may break due to sudden temperature change.

Use care when opening oven door. Let hot air or steam escape before removing or replacing food.

Do not heat unopened food containers in oven.

Buildup of pressure may cause a container to burst and result in injury.

Keep range vent ducts unobstructed.

Place oven racks in desired location while oven is cool. If a rack must be moved while oven is hot, use a dry potholder.

Do not use aluminum foil to line oven bottom or racks. Aluminum foil can cause a fire and will seriously affect baking results, and damage to porcelain surfaces.

Do not touch interior surfaces of oven during or immediately after use. Do not let clothing or other flammable materials come in contact with bake or broil burners.

Other areas of the oven can become hot enough to cause burns, such as vent openings, window, oven door and oven racks.

To avoid steam burns, do not use a wet sponge or cloth to wipe up spills on hot cooking area.

Do not store combustible or flammable materials, such as gasoline or other flammable vapors and liquids near or in oven.

Do not clean oven door gasket located on back of the door. Gasket is necessary to seal the oven and can be damaged as a result of rubbing or being moved.

Do not drape towels or any materials on oven door handles. These items may ignite causing a fire.

!CAUTION

Do not store items of interest to children in cabinets above range. Children may climb on oven to reach these items and become seriously injured.

©2004 Maytag Services

16023522

5

Important Safety Information

Baking, Broiling, and Roasting

Do not use oven area for storage.

Stand back from range when opening door of a hot oven. Hot air or steam can cause burns to hands, face, and eyes.

Do not use aluminum foil anywhere in the oven. This could result in a fire hazard and damage the range.

Use only glass cookware appropriate for use in gas ovens.

Always remove broiler pan from oven when finished broiling. Grease left in pan can catch fire if oven is used without removing grease from the broiler pan.

Meat that is close to the flame may ignite when broiling. Trim any excess fat to help prevent excessive flare-ups.

Make sure broiler pan is placed correctly to reduce any possibility of grease fires.

Should a grease fire occur in the broiler pan, turn off oven, and keep oven door closed until fire burns out.

Gas Burner Orifices

Oven Safety Valve

Connecting Range to Gas

Install manual shut-off valve in gas line for easy accessibility outside range. Be aware of the location of the shut-off valve.

Electrical Requirements

 

 

120-volt, 60 Hertz, 15 amp, individual circuit which is

Grounded Oven Frame

properly grounded, polarized and protected by a circuit

 

breaker or fuse.

 

 

Extension Cord

 

 

Due to possible pinching during installation, extension

 

cords should not be used on products.

 

Extension cords will adversely affect the performance of

 

spark system.

 

 

Product Safety Devices

 

 

Safety devices and features have been engineered into

 

the product to protect consumer and servicer. Safety

 

devices must never be removed, bypassed, or altered in

 

such a manner as to defeat the purpose for which they

 

were intended.

 

 

Listed below are various safety devices together with the

 

reason each device is incorporated in the gas ranges.

 

Pressure Regulator

Maintains proper and

 

 

steady gas pressure for

 

 

operation of oven

 

 

controls. Regulator must

 

 

be set for the type of

 

 

gas being used Natural

 

 

or LP. After servicing

 

 

regulator, make certain it

 

 

is set properly before

 

 

completing service.

 

6

16023522

Universal orifices are used on most valves. They must be adjusted or set for the type of gas being used Natural or

LP.

After servicing a valve or orifice verify it is adjusted properly before completing service.

Oven valve is designed to be a safety valve. Two basic designs are used in gas ranges.

Hydraulic type valve Electric type valve

Both types are safety valves because they are indirectly operated or controlled by the oven thermostat, which controls a pilot flame or electric ignitor, to open and close the oven valve.

Ground prong on power cord is connected to the frame, usually a green lead fastened by a screw. In addition, any part or component capable of conducting an electric current is grounded by its mounting.

If any ground wire, screw, strap, nut, etc. is removed for service, or any reason, it must be reconnected to its original position with original fastener before the appliance is put into operation again.

Failure to do so can create a possible shock hazard.

©2004 Maytag Services

General Information

This manual provides basic instructions and suggestions for handling, installing and servicing gas ranges.

The directions, information, and warnings in this manual are developed from experience with, and careful testing of the product. If the unit is installed according to this manual, it will operate properly and will require minimal servicing. A unit in proper operating order ensures the consumer all the benefits provided by clean, modern gas cooking.

This manual contains information needed by authorized service technicians to install and service gas ranges. There may be, however, some parts which need further explanation. Refer to the Installation Instructions, Use and Care, Technical Sheets or the toll-free technical support line.

Cooking Nomenclature

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M

 

 

G

 

 

R

 

 

5

7

5

1

 

 

A

 

 

 

D

 

 

 

W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

Almond on Almond

 

 

 

 

Brand

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

Black

 

 

A

Amana

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

Brushed Chrome

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H

Traditional White

 

 

C

Magic Chef

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

Traditional Almond

 

 

G

Graffer &

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P

Prostyle

 

 

 

 

Sattler

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Q

Monochromatic Bisque

 

 

H

Hardwick

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S

Stainless

 

 

J

Jenn-Air

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T

Traditional Bisque

 

 

M

Maytag

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W

White on White

 

 

N

Norge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F Frost White (True Color White)

 

 

U

Universal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N Natural Bisque (True Color Bisque)

 

 

Y

Crosley

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fuel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

UL/AGA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

Butane

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

CSA/CGA/CUL

 

 

 

D

 

Dual Fuel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

Dual Listed

 

 

 

E/J

 

 

Electric

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G 220-240 V / 50-60 Hz

 

 

 

G

 

Gas, Natural

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M

Military Model

 

 

 

L

 

 

Liquid Propane

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P

PSB Approved

 

 

 

M

 

 

Microwave

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Singapore)

 

 

 

P

 

 

Standing Pilot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

X Export 120 V / 60 Hz

 

 

 

X

 

 

No Fuel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W

 

 

Warming Drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Production Code

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This identifies the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

production version.

 

 

 

A Accessory/Cartridge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CCooktop Updraft/Countertop

DDowndraft Cooktop or Warming Drawer

EEyelevel Range

G

Grill

 

 

L

Range (20")

Feature Content

M

Range (36")

1000-3999

Brands

P

Drop In (24")

4000-6999

Maytag/Amana

Q

Wall Oven (27")

7000-9999

Jenn Air

 

 

RRange, Free-Standing (30")

SSlide-In (30")

TRange Hood

V OTR

W Wall Oven

YRV Range

ZRV Top

©2004 Maytag Services

16023522

7

General Information

Specifications

Refer to individual Technical Sheet for specification information.

Placement of the Oven

This freestanding range must be placed in the kitchen or comparable room. All safety guidelines must be followed and free air flow around the range is essential (see Chapter 2).

Do Not Block Air Vents

All air vents must be kept clear during cooking. If air vents are covered during operation, the oven may overheat. If this occurs, a sensitive, thermal safety device automatically removes power to the oven, rendering the oven inoperable. The oven will remain in this state until it has sufficiently cooled.

Location of Model Number

To request service information or replacement parts, the service center will require the complete model, serial, and manufacturing number of your freestanding range. The number can be found on a metal tag located on the back of the control panel. Reach behind the top left corner of the control panel and rotate the tags up to view the data.

Rating Label

Model Number

Model Identification

Complete enclosed registration card and promptly return. If registration card is missing:

For Amana product call 1-800-843-0304 or visit the Web Site at www.amana.com

For Maytag product call 1-800-688-9900 or visit the Web Site at www.maytag.com

For product in Canada call 1-866-587-2002 or visit the Web Site at www.maytag.com

When contacting provide product information located on rating plate. Record the following:

Model Number:

___________________

Manufacturing Number:

___________________

Serial or S/N Number:

___________________

Date of purchase:

___________________

Dealer’s name and address:

___________________

Service

Keep a copy of sales receipt for future reference or in case warranty service is required. To locate an authorized servicer:

For Amana product call 1-800-628-5782 or visit the Web Site at www.amana.com

For Maytag product call 1-800-462-9824 or visit the Web Site at www.maytag.com

For product in Canada call 1-866-587-2002 or visit the Web Site at www.maytag.com

Warranty service must be performed by an authorized servicer. We also recommend contacting an authorized servicer, if service is required after warranty expires.

Parts and Accessories

Purchase replacement parts and accessories over the phone. To order accessories for your product call:

For Amana product call 1-877-232-6771 or visit the Web Site at www.amana.com

For Maytag product call 1-800-688-9900 or visit the Web Site at www.maytag.com

For product in Canada call 1-866-587-2002 or visit the Web Sites at www.maytag.com

Extended Service Plan

We offer long-term service protection for this new oven.

Dependability PlusSM Extended Service Plan is specially designed to supplement Maytag’s warranty. This plan covers parts, labor, and travel charges. Call 1-800-925-2020 for information.

8

16023522

©2004 Maytag Services

General Information

Grounding

NOTE: This appliance must be properly grounded, for personal safety.

Power cord on this appliance is equipped with a threeprong grounding plug. This matches standard three-prong grounding wall receptacle to prevent possibility of electric shock from this appliance.

Consumer should have wall receptacle and circuit checked by qualified electrician to verify receptacle is properly grounded.

It is the consumers responsibility to replace standard twoprong wall receptacles with properly grounded three-prong wall receptacles.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM POWER CORD.

For 15 amp circuits only, do not use an adapter on 20 amp circuit. Where local codes permit, a TEMPORARY CONNECTION may be made to a properly grounded twoprong wall receptacle by the use of a UL listed adapter (available at most hardware stores).

Larger slot on adapter must be aligned with larger slot in the wall receptacle to provide proper polarity.

!WARNING

Attaching adapter ground terminal to wall receptacle cover screw does not ground appliance unless the cover screw is metal and not insulated, and wall receptacle is grounded through the house wiring. Consumer should have circuit checked by a qualified electrician to verify receptacle is properly grounded.

When disconnecting power cord from adapter, always hold adapter with one hand. If this is not done, adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOT USE appliance until a proper ground has been established.

Neutral Wire

Ground Hot Line

NOTE: Circuit tester can be used to verify voltage at outlet. Connect one lead to hot line and the other lead to ground. Circuit tester should light.

©2004 Maytag Services

16023522

9

Range Description

 

Control

Oven Light Switch

 

 

Surface

 

Surface

Burners

 

Burners

Surface Burner

 

Surface Burner

 

Control Knobs

Control Knobs

 

 

 

 

 

Door Handle

 

 

Broil Burner

Oven Light

 

Oven Door

 

 

and Sensor

 

Oven Racks

 

 

 

 

Door Hinge

Door Hinge

 

Bake Burner

Rating Label

 

Model Number

 

 

Service/

 

 

Warming

 

 

Drawer

 

 

10

16023522

©2004 Maytag Services

Troubleshooting Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Problem

Possible Cause

 

Poor ground on burner cap ...........................

Burners will not ignite; no

Weak or failed spark module ........................

Low gas pressure

spark at top burner.

 

 

Clogged burner port ......................................

 

 

 

No 120 VAC to range ....................................

 

Micro switch contacts not closing ..................

Burner will not ignite. No

Faulty wiring. Bad connection at burner

electrode and electrode socket

spark to burner ignitors when

 

burner knob is rotated to

 

“LITE” position.

 

 

Inoperative spark module ..............................

 

Electrode dirty. Burner cap dirty ....................

 

Cracked or broken electrode, electrode

 

wire or electrode socket ................................

 

 

 

Check for cracked ignitor or pinched ignitor

 

wire ...............................................................

 

Poor continuity to burner cap.........................

No spark or only random

Bad ground connection or lack of continuity

to ground or ignitor

spark at one ignitor.

 

 

Cracked or broken ignitor extension lead......

 

 

 

Shorted valve switch/harness........................

Unit continues to spark after

 

knob is turned to OFF

Switch has slipped off the valve

position.

 

 

 

 

No voltage to control......................................

No oven operation in bake or

No voltage from control .................................

broil.

Loose wire connection or broken wire

 

 

 

Correction

Clean burner cap.

Replace spark module.

Verify pressure 4” WCP for natural, 10” WCP for LP.

Clean burner cap.

Verify voltage at wall outlet.

Check wiring against appropriate wiring diagram. Verify all terminals and connections are correct and tight. Check micro switch contacts.

Check wiring against appropriate wiring diagram. Verify all terminals and connections are correct and tight.

Check module according to testing procedures information.

Clean electrode or burner cap.

Replace electrode.

Replace ignitor lead or electrode.

Clean burner cap and lead.

Tighten ground connection and correct any breaks in ground path from ignitor path to unit ground path.

Replace ignitor lead.

Replace switch/harness. If shorting is caused by excessive spillovers, customer education is advised.

Carefully reposition switch on valve and rotate from OFF to high, several times to verify switch is not broken.

Check for 120 VAC at control. If no voltage check power source.

Check 120 VAC to ignitor, if no voltage, replace control.

Verify all connections are clean and tight, replace broken wire.

©2004 Maytag Services

16023522

11

Troubleshooting Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Problem

Possible Cause

Correction

 

Failed ignitor. .................................................

Check ignitor current draw, 3.2 –

 

 

3.6 Amps. Replace ignitor, if it

 

 

fails test.

 

Gas pressure too high ...................................

Check for correct gas pressure.

No gas flows to burner.

 

Natural gas pressure should be 4"

Ignitor glows red.

 

WCP and LP gas pressure should

 

 

be 10" WCP.

 

Failed gas valve.............................................

Check gas valve for continuity.

 

Loose wire connection or broken wire ...........

Verify all connections are clean

 

 

and tight, replace broken wire.

 

Ignitor positioned too far from burner ............

Reposition ignitor closer to

 

 

bake/broil burner.

 

Dirt or grease in orifice or burner...................

Clean orifice or burner.

 

Insufficient gas pressure ...............................

Check for correct gas pressure.

Gas flows to bake/broil

 

Natural gas pressure should be 5"

 

WCP and LP gas pressure should

burner, but burner does not

 

 

be 10" WCP.

light.

 

Power outage

Verify power is present at unit.

 

 

 

Verify that the circuit breaker is

 

 

not tripped.

 

 

Replace household fuse, but do

 

 

not fuse capacity.

 

Power outage ................................................

Verify power is present at unit.

Broil burner shuts off shortly

 

Verify that the circuit breaker is

 

not tripped.

after the start of self-clean

 

 

Replace household fuse, but do

operation. Bake and broil

 

functions operate normally.

 

not fuse capacity.

Control Error

See “Control Systems

 

 

 

Troubleshooting.”

 

No power to fan motor...................................

Check for 120 VAC supplied at

 

 

fan motor. If no voltage is

 

 

present, check for broken or

 

 

loose wiring between fan motor

 

 

and relay board. If voltage is

Fan motor does not operate.

 

present at fan motor, go to the

 

next step.

 

 

 

Failed fan motor or winding/frozen shaft .......

Check motor winding for

 

 

continuity. Check for a frozen

 

 

motor shaft. Check for broken

 

 

wiring between motor and neutral

 

 

terminal block.

12

16023522

©2004 Maytag Services

Troubleshooting Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Problem

Possible Cause

 

Failed oven lamp .....................................

 

Failed wiring ............................................

Oven light does not operate.

Failed light socket

 

 

Failed light plunger/switch .......................

 

 

 

Oven is cleaning......................................

 

Oven is still hot ........................................

Oven door will not unlock

 

 

 

Oven smokes/odor first few

Normal.....................................................

times of usage

 

Failure Codes

Electronically Controlled ..........................

 

 

 

 

Power Outage..........................................

 

Improperly set oven controls ...................

Part or all of the appliance

Oven door locked ....................................

does not work

 

 

Delayed cooking ......................................

 

 

Correction

Check lamp and replace is necessary.

Check for broken, loose or dirty connections.

Check light socket for continuity.

Check plunger/switch for continuity. Check wiring diagram for application.

Allow cycle to complete.

Door will not unlock until unit has cooled to safe temperature. Do not force door open, this will void warranty. Blow cool air on door latch area to quicken process.

Minor smoking and/or odor is normal the first few times of oven usage.

See Testing Procedures for diagnostic checks.

Check power supply/circuit breaker.

Verify oven controls are properly set.

Verify oven door is unlocked after a clean cycle.

Verify oven is not set for delayed cooking program.

©2004 Maytag Services

16023522

13

Maytag AGR5712ADB-Q-S-W, CGR1110ADQ-W, AGR4412ADB-Q-S-W, CPL1100ADH-L-Q-T-W, CPR1100ADQ-W User Manual

Component Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Illustration

Component

Test Procedure

Results

 

Oven light socket

Test continuity of receptacle terminals ...

Indicates continuity with bulb inserted.

 

 

Measure voltage at oven light.................

120 VAC, see wiring diagram for terminal

 

 

 

identification.

 

 

 

If no voltage present, check wiring.

 

Rocker switch

Measure continuity of switch positions:

 

 

 

Closed.................................................

Continuity

 

 

Open...................................................

Infinite

 

Door lock switch

Switch connection in following

Normally Open

NC

 

positions: Not engaged

COM-NO=Open, COM-NC=Closed

COM

 

NO

 

 

 

 

 

Engaged ..............................

COM-NO=Closed, COM-NC=Open

 

Manual Latch

Disconnect wires and test for

 

 

assembly with switch

continuity per wiring diagram..................

See wiring diagram for schematic layout.

 

 

 

Refer to Parts Manual for replacement

 

 

 

components.

 

 

 

NOTE: Control will cancel function if

 

 

 

latch is moved to LOCK position during

 

 

 

Bake or Broil.

 

Bake burner

Verify gas is supplied.

Air shutter opening: .469" to .531".

 

 

Verify proper orifice installed-Nat or LP ..

Blue flame with no yellow tipping.

 

 

Check for obstructions, contamination

 

 

 

in ports or damage .................................

Replace if punctured or torn.

 

Bake burner

Verify gas is supplied.

Air shutter opening: .349" to .411".

 

Models CPL1100AD*,

Verify proper orifice installed-Nat or LP ..

Blue flame with no yellow tipping.

 

CGL1100AD*

Check for obstructions, contamination

 

 

 

in ports or damage .................................

Replace if punctured or torn.

 

Broil burner

Verify gas is supplied.

Air shutter opening: .281" to .343".

 

 

Verify proper orifice installed-Nat or LP ..

Blue flame with no yellow tipping.

 

 

Check for obstructions, contamination

 

 

 

in ports or damage .................................

Replace if punctured or torn.

 

Ignitor

Test for voltage at terminals ...................

120 VAC

 

 

Test for amount of amperage in circuit ...

3.2 to 3.6 Amps.

 

 

(Ignitor may glow, but not have

 

 

 

sufficient amperage to open valve).

 

 

Temperature sensor

Measure resistance ................................

Approximately 1000 Ω at room

 

 

 

temperature 80°F.

 

Gas thermostat

Test for voltage at terminals ...................

120 VAC

 

Models AGR4400AD*,

 

 

 

CGR1415AD*,

 

 

 

CGR1110AD*,

 

 

 

CGL1100AD*,

 

 

 

CPL1100AD*,

 

 

 

CP31200AD*,

 

 

 

CG31200AD*,

 

 

 

CG31400AD*

 

 

 

Gas thermostat

Test for voltage at terminals ...................

120 VAC

 

Model CPR1100AD*

 

 

 

Pressure regulator

Verify gas pressure (WCP).....................

4" Natural

 

 

If using LP service, verify proper gas

10" LP/Propane

 

 

 

 

 

supply conversion.

 

 

Spark ignition

Test for resistance of spark lead ............

Continuity

 

electrode

 

 

 

 

Test ignitor to chassis.............................

No continuity from ignitor to chassis.

14

16023522

©2004 Maytag Services

Component Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Illustration

Component

Test Procedure

Results

 

Spark module

Test for voltage at terminals

 

 

4 + 0

L and N...............................................

120 VAC

GND

Input

Polarity and ground

Not subject to polarity

L or N

 

 

 

Spark module

Test for voltage at terminals...................

120 VAC

 

2 + 0

 

 

 

CGL1100AD*

Polarity and ground................................

Not subject to polarity

 

Holder orifice

Verify gas pressure (WCP) ....................

4" Natural

 

 

Check orifice for debris

10" LP/Propane

 

 

Clean as needed.

 

Shut-off Valve

Verify gas supply is turned on.

Gas is turned on.

 

Shut-off Valve

Verify gas supply is turned on.

Gas is turned on.

 

Model CPL1100AD*

 

 

 

270° valve

Verify gas is supplied.

 

 

 

Orifice adjusted for Natural or LP.

 

 

Spark 270° switch

Adjust set screw for simmer control .......

Refer to LP/Nat. conversion instructions.

 

Unplug switch harness at rear of

120 VAC

 

 

range. Test for continuity at wire

 

 

 

terminals.

 

 

 

Switch in LITE position .........................

Continuity

 

 

Switch in any other position..................

Infinite

 

Spark switch

Unplug switch harness at rear of

120 VAC

 

Model CGL1100AD*

range. Test for continuity at wire

 

 

 

terminals.

 

 

 

Switch in LITE position .........................

Continuity

 

 

Switch in any other position..................

Infinite

 

Sealed burner

Verify gas is supplied.............................

Gas present.

 

 

Check for obstructions or

 

 

 

contamination in burner ports.................

Clean/remove any foreign objects.

 

 

 

Check ignitor for bending/cracking.

 

Open burner

Verify gas is supplied.............................

Gas present.

 

Model CPR1100AD*,

 

 

 

LPR1115AD*,

Verify air shutter adjusted properly.........

Air shutter opening: .400" to .500".

 

CP31200AD*,

 

 

 

CG31200AD*

 

 

 

Open burner

Verify gas is supplied.............................

Gas present.

 

Models CPL1100AD*,

 

 

 

CGL1100AD*

Verify air shutter adjusted properly.........

Air shutter opening: .435" to .565".

 

Open burner

Verify gas is supplied.............................

Gas present.

 

Model CGR1110AD*

 

 

 

 

Verify air shutter adjusted properly.........

Air shutter opening: .420" to .460".

 

Pilot burner

Verify pilot selector cartridge is set to

 

 

Models CPL1100AD*,

the proper gas........................................

LP or Natural

 

CPR1100AD*,

 

 

 

LPR1115AD*,

 

 

 

CP31200AD*,

 

 

 

CG31200AD*

 

 

©2004 Maytag Services

16023522

15

Component Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Illustration

Component

Test Procedure

Results

M1 Controlled

Oven temperature

Press Bake pad.

While increasing or decreasing oven

 

adjustment

Enter 550 on the digit-pad.

temperature, this does not affect self-

 

 

Immediately press and hold Bake pad

cleaning temperature.

 

 

for 3 to 5 seconds.

 

 

 

Oven can be adjusted from -35 to +35

 

 

 

degrees in 5-degree increments by

 

 

 

pressing More + or Less - pads. To

 

 

 

avoid over adjusting the oven, move

 

 

 

temperature 5 degrees each time.

 

 

 

Wait 4 seconds for the data entry

 

 

 

timer to expire to accept the change.

 

 

 

Temperature adjustment is retained

 

 

 

even through a power failure.

 

M1 Controlled

Temperature display

Press and hold Cancel and Bake

This mode enables the user to indicate

 

 

pads for 3 to 5 seconds. Press

°F or °C on the display.

 

 

More + or Less - pads to change.

 

M1 Controlled

Clock Display

Press and hold Cancel and Clock

Allows clock to be toggled On or OFF.

 

 

pads for 3 to 5 seconds.

 

M1 Controlled

24 Hour Clock

Press and hold Cancel and Delay

Allows the time on the clock to be

 

 

pads for 3 to 5 seconds. Press

toggled from 12 hour or 24 hour display.

 

 

More + or Less - pads to change.

 

M1 Controlled

Factory Default

Press and hold Cancel and Keep

Allows the clock to be reset to factory

 

 

Warm pads for 3 to 5 seconds until

settings.

 

 

beep sounds.

 

M1 Controlled

Twelve hour off

Control will automatically cancel any

See Sabbath mode to disable.

 

 

cooking operation and remove all relay

 

 

 

drives 12 hours after the last pad

 

 

 

touch.

 

M1 Controlled

Sabbath Mode

Hold Clock pad for 3 to 5 seconds to

"SAb" will be displayed and flash for 5

 

 

activate Sabbath mode.

seconds then remain on until until timed-

 

 

 

out or cancelled.

 

 

Hold Clock pad for 3 to 5 seconds to

The status “SAB” is NOT fault code 5A6.

 

 

disable Sabbath mode.

All pad inputs are disabled except for

 

 

 

CANCEL and CLOCK pads.

 

 

Desired bake function must be

This mode disables the normal 12 hour

 

 

initiated before entering Sabbath

shutoff to allow operation of the bake

 

 

mode.

mode for a maximum of 72 hours.

 

 

 

The oven light is not disabled.

M1 Controlled

Child lock out

Press and hold Cancel and Cook &

This is a safety feature that can be used

 

 

Hold pads for 3 to 5 seconds until

to prevent children from accidentally

 

 

beep sounds.

programming the oven. It disables the

 

 

To reactivate the control, press and

electronic oven control.

 

 

hold Cancel and Cook & Hold pads

Child lockout features must be reset after

 

 

for 3 to 5 seconds.

 

 

 

a power failure.

M1 Controlled

Diagnostic Code

Press and hold More + pad within 60

The last 5 diagnostic codes will be stored

 

Display

seconds of powering up the unit.

in the non-volatile memory.

 

 

Cycle through the codes using the

See "Description of Error Codes" for

 

 

More + or Less - pads.

 

 

 

explanation.

16

16023522

©2004 Maytag Services

Component Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

"Quick Test" Mode for Electronic Range Control

Follow procedure below to use the quick test mode. Entries must be made within 32 seconds of each other or the control will exit the quick test mode.

1.Press and hold Cancel and Broil pads for 3 seconds.

2.Once the control has entered the "Quick Test" mode, release both pads.

3.Press each of the following pads indicated in the table below.

NOTE: First time one of following pads are pressed it will activate the response.

The second time the pad is pressed it will deactivate the response.

NOTE: This mode can only be entered within the first 5 minutes after power up.

NOTE: If the temperature sensor is greater than 400° F and the "Quick Test" mode will be disabled if the temperature sensor reaches 400° F while under test.

Display will indicate the following:

Key

Operation

[Bake]

Bake relay activated

[Broil]

Broil relay activated

[Keep Warm]

N\A

[Cook&Hold]

Last Diagnostic Code displayed

[Clean]

Beep sounds

[Delay] (M1)

EEPROM Version Number displayed

[Timer]

Main Code Version Number displayed

[Clock]

All Segments On

[More +]

Even Segments On

[Less –]

Odd Segments On

[Cancel]

End Factory Test Mode

Description of Error Codes

Error diagnostic codes can only be viewed by entering the Diagnostic Code Display Mode. Each error code is four digits long and is created based on the following table.

Digit

 

 

Description

1st

Primary System:

1 – Local to the control circuit board

 

 

3

– Sensor or meat probe

 

 

4

– Control input

 

 

9

– Door lock

2nd

Measurable:

d – Diagnostic: measurable parameter

 

 

c – Control related, replace control

3rd

Secondary System: Sequential numbering

4th

Oven Cavity:

1 – Upper oven (or single cavity oven)

 

 

2

– Lower oven

 

 

c – Control specific

Diagnostic Code Display Mode may be started only within 60 seconds when powering up the control.

©2004 Maytag Services

16023522

17

Component Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Diagnostic Code Checking

Code

Description

 

 

When Checked

 

Detection

1c1c

Shorted key

 

 

Always

 

1 minute

1c2c

Keyboard tail disconnected

 

 

Always

 

1 minute

1c31

Cancel key circuit problem

 

 

Always

 

20 seconds

1c6c

EEPROM error

 

When accessing EEPROM

 

3 tries

1c7c

Control not calibrated

 

 

Always

 

3 tries

1c8c

Cooking program error

 

Cook or clean programmed

 

3 tries

1d11

Runaway temp (650°F), door unlocked

 

 

Latch unlocked

 

1 minute

1d21

Runaway temp (950°F), door locked

 

 

Latch locked

 

1 minute

3d11

Sensor open

 

Cook or clean active

 

20 seconds

3d21

Sensor shorted

 

Cook or clean active

 

20 seconds

9d11

Latch will not lock

 

Latch should be locked

 

See Note 6

Diagnostic Code Handling

 

 

 

 

 

 

 

 

 

 

Code

Measurable

What is Displayed

Action Taken By Control

 

 

 

 

 

Disables audible for affected key

1c1c

Keypress

Nothing

 

depression

 

 

Disables all outputs 1, 2

 

 

 

 

 

Disables lights and timers

 

 

 

 

 

Disables audible for key depression

1c2c

Keyboard loop improper value

Nothing

 

Disables all outputs 1

 

 

 

 

 

 

Disables lights and timers

1c31

Cancel key improper value

BAKE flashes 3

Disables all outputs for cavity 1

1c6c

No response from EEPROM

Nothing

 

Disables all outputs 1

 

1c7c

Calibration value out of range

"CAL" in the time digits

Completely disables oven 4

1c8c

CRC invalid

Nothing

 

Cancels active cook function

1d11

Sensor resistance > 2237 Ohms

BAKE flashes 3

Disables all cook function for cavity

1d21

Sensor resistance > 2787 Ohms

BAKE flashes 3

Disables all cook function for cavity

3d11

Sensor resistance > Infinite Ohms

BAKE flashes 3

Disables all cook function for cavity

3d21

Sensor resistance > 0 Ohms

BAKE flashes 3

Disables all cook function for cavity

4d11

Door switch not closed when door is

Nothing

 

Disables Clean and Lockout

 

locked

 

functions 5

 

 

 

 

 

 

4d51

Door switch not open or closed

 

 

 

Disables Clean and Lockout

 

 

Nothing

 

functions 4, 5

 

 

 

 

Turn off light and disable light from

 

 

 

 

 

 

 

 

 

 

door switch

 

9d11

Lock switch not closed

LOCK flashes

3

Disables Clean and Lockout

 

 

functions 4

 

18

16023522

©2004 Maytag Services

Component Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

NOTES:

1

2

3

4

5

6

"Action Taken" applies as long as the condition exists. If the condition goes away, the control recovers.

If there is a cook function or timer active, the function continues. The user cannot edit the function, and [Cancel] will cancel the cook mode.

Flash rate: 0.2 seconds on, 0.1 second off. Pressing any key will clear the display until the fault clears and is re-triggered. "Action Taken" applies until there is a POR (Power On Reset ["hard reset"]).

If the control believes the door is locked, unlock it when the function cancels and the cavity temperature cools. Special conditions for latch faults (9dxx):

A known good unlock position is defined as when the unlock switch reads closed and lock switch reads open.

A known good lock position is defined as when the unlock switch reads open and lock switch reads closed.

A faulted switch means the switch input is reading an invalid state, neither open nor closed.

If at POR, the latch is not at a known good unlock position:

Affected DLBs (Double Line Breaks) and loads are disabled during detection.

If the control is in a known good unlock position and the lock switch becomes faulted:

The control will not fault.

If a function requiring latch movement is attempted while the lock switch is faulted, the control will sound an error tone and the function will be disabled.

 

 

 

 

+

 

Bake

 

 

 

_

Timer

 

 

 

 

 

Broil

 

 

 

 

CANCEL

Cook

Clean

Delay

Clock

 

Keep

 

Warm

Hold

 

 

 

 

Typical M1 Control

©2004 Maytag Services

16023522

19

Loading...
+ 44 hidden pages