Maxim MAX147BEAP, MAX147BCDP, MAX147BCAP, MAX147AMJP, MAX147AEPP Datasheet

...
0 (0)

KIT

 

 

 

 

 

 

 

EVALUATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AVAILABLE

 

 

Channel,

 

 

 

 

Serial 12-Bit ADCs

Description

-acquisition systems high-bandwidth with high conversion

. The MAX146 oper-

.6V supply; the MAX147 to +5.25V supply. Both configurable for

operation.

directly to SPI™/ without external logic. A connection to TMS320-

. The MAX146/MAX147 external serial-interface analog-to-

.5V reference, while the

. Both parts have with a ±1.5% voltage-

-wired SHDN pin and a and can be prodown at the end of a coninterface automatically

powers up the MAX146/MAX147, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates.

The MAX146/MAX147 are available in 20-pin DIP and SSOP packages.

For 4-channel versions of these devices, see the MAX1246/MAX1247 data sheet.

________________________Applications

Portable Data Logging

Data Acquisition

Medical Instruments

Battery-Powered Instruments

Pen Digitizers

Process Control

Pin Configuration appears at end of data sheet.

SPI and QSPI are registered trademarks of Motorola, Inc.

Microwire is a registered trademark of National Semiconductor Corp.

____________________________Features

8-Channel Single-Ended or 4-Channel Differential Inputs

Single-Supply Operation:

+2.7V to +3.6V (MAX146)

+2.7V to +5.25V (MAX147)

Internal 2.5V Reference (MAX146)

Low Power: 1.2mA (133ksps, 3V supply)

54µA (1ksps, 3V supply) 1µA (power-down mode)

SPI/QSPI/Microwire/TMS320-Compatible 4-Wire Serial Interface

Software-Configurable Unipolar or Bipolar Inputs

20-Pin DIP/SSOP Packages

______________Ordering Information

PART

TEMP. RANGE

PIN-PACKAGE

INL

 

 

 

(LSB)

MAX146ACPP

0°C to +70°C

20 Plastic DIP

±1/2

 

 

 

 

MAX146BCPP

0°C to +70°C

20 Plastic DIP

±1

 

 

 

 

MAX146ACAP

0°C to +70°C

20 SSOP

±1/2

MAX146BCAP

0°C to +70°C

20 SSOP

±1

 

 

 

 

MAX146BC/D

0°C to +70°C

Dice*

±1

Ordering Information continued at end of data sheet.

Contact factory for availability of alternate surface-mount packages.

*Dice are specified at TA = +25°C, DC parameters only.

__________Typical Operating Circuit

 

 

 

+3V

 

CH0

VDD

VDD

0V TO

 

DGND

0.1μF

 

 

+2.5V

 

 

 

 

 

ANALOG

MAX146 AGND

 

INPUTS

CPU

 

CH7

COM

 

 

4.7μF

VREF

CS

I/O

 

SCLK

SCK (SK)

 

 

 

 

DIN

MOSI (SO)

0.047μF

REFADJ

DOUT

MISO (SI)

 

SSTRB

 

 

 

VSS

 

 

SHDN

 

 

 

________________________________________________________________ Maxim Integrated Products 1

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800

MAX146/MAX147

MAX146/MAX147

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

ABSOLUTE MAXIMUM RATINGS

VDD to AGND, DGND.................................................

 

- 0.3V to 6V

AGND to DGND ......................................................

 

- 0.3V to 0.3V

CH0–CH7, COM to AGND, DGND ............

-0.3V to (VDD + 0.3V)

VREF, REFADJ to AGND ...........................

-0.3V to (VDD + 0.3V)

Digital Inputs to DGND ..............................................

 

- 0.3V to 6V

Digital Outputs to DGND ...........................

-0.3V to (VDD + 0.3V)

Digital Output Sink Current .................................................

 

25mA

Continuous Power Dissipation (TA = +70°C)

 

Plastic DIP (derate 11.11mW/°C above +70°C)

......... 889mW

SSOP (derate 8.00mW/°C above +70°C) ...................

640mW

CERDIP (derate 11.11mW/°C above +70°C)..............

889mW

Operating Temperature Ranges

 

MAX146_C_P/MAX147_C_P ..............................

0°C to +70°C

MAX146_E_P/MAX147_E_P............................

-40°C to +85°C

MAX146_MJP/MAX147_MJP ........................

-55°C to +125°C

Storage Temperature Range ............................

-60°C to +150°C

Lead Temperature (soldering, 10sec) ............................

+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

(VDD = +2.7V to +3.6V (MAX146); VDD = +2.7V to +5.25V (MAX147); COM = 0V; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146—4.7µF capacitor at VREF pin; MAX147—external reference, VREF = 2.500V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.)

 

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

 

 

DC ACCURACY (Note 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Resolution

 

 

12

 

 

Bits

 

 

 

 

 

 

 

 

 

 

 

Relative Accuracy (Note 2)

INL

MAX14_A

 

 

±0.5

LSB

 

 

 

 

 

 

 

 

MAX14_B

 

 

±1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Differential Nonlinearity

DNL

No missing codes over temperature

 

 

±1

LSB

 

 

 

 

 

 

 

 

 

 

 

Offset Error

 

MAX14_A

 

±0.5

±3

LSB

 

 

 

 

 

 

 

 

 

 

MAX14_B

 

±0.5

±4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gain Error (Note 3)

 

 

 

±0.5

±4

LSB

 

 

 

 

 

 

 

 

 

 

 

Gain Temperature Coefficient

 

 

 

±0.25

 

ppm/°C

 

 

 

 

 

 

 

 

 

 

 

Channel-to-Channel Offset

 

 

 

±0.25

 

LSB

 

 

Matching

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DYNAMIC SPECIFICATIONS (10kHz sine-wave input, 0V to 2.500Vp-p, 133ksps, 2.0MHz external clock, bipolar input mode)

 

Signal-to-Noise + Distortion Ratio

SINAD

 

70

73

 

dB

 

 

 

 

 

 

 

 

 

 

 

Total Harmonic Distortion

THD

Up to the 5th harmonic

 

-88

-80

dB

 

 

 

 

 

 

 

 

 

 

 

Spurious-Free Dynamic Range

SFDR

 

80

90

 

dB

 

 

 

 

 

 

 

 

 

 

 

Channel-to-Channel Crosstalk

 

65kHz, 2.500Vp-p (Note 4)

 

-85

 

dB

 

 

Small-Signal Bandwidth

 

-3dB rolloff

 

2.25

 

MHz

 

 

 

 

 

 

 

 

 

 

 

Full-Power Bandwidth

 

 

 

1.0

 

MHz

 

 

 

 

 

 

 

 

 

 

 

CONVERSION RATE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Internal clock, SHDN = FLOAT

5.5

 

7.5

 

 

 

Conversion Time (Note 5)

tCONV

 

 

 

 

µs

 

 

Internal clock, SHDN = VDD

35

 

65

 

 

 

 

 

 

 

 

 

 

 

 

 

External clock = 2MHz, 12 clocks/conversion

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track/Hold Acquisition Time

tACQ

 

 

 

1.5

µs

 

 

 

 

 

 

 

 

 

 

 

Aperture Delay

 

 

 

30

 

ns

 

 

 

 

 

 

 

 

 

 

 

Aperture Jitter

 

 

 

<50

 

ps

 

 

 

 

 

 

 

 

 

 

 

Internal Clock Frequency

 

SHDN = FLOAT

 

1.8

 

MHz

 

 

 

 

 

 

 

 

 

 

SHDN = VDD

 

0.225

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

External Clock Frequency

 

 

0.1

 

2.0

MHz

 

 

 

 

 

 

 

 

 

 

Data transfer only

0

 

2.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 _______________________________________________________________________________________

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

ELECTRICAL CHARACTERISTICS (continued)

(VDD = +2.7V to +3.6V (MAX146); VDD = +2.7V to +5.25V (MAX147); COM = 0V; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146—4.7µF capacitor at VREF pin; MAX147—external reference, VREF = 2.500V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.)

 

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

ANALOG/COM INPUTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Voltage Range, Single-

 

Unipolar, COM = 0V

 

 

0 to VREF

V

 

 

 

 

 

 

 

Ended and Differential (Note 6)

 

Bipolar, COM = VREF / 2

 

 

±VREF / 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multiplexer Leakage Current

 

On/off leakage current, VCH_ = 0V or VDD

 

±0.01

±1

µA

 

Input Capacitance

 

 

 

16

 

pF

 

 

 

 

 

 

 

 

INTERNAL REFERENCE (MAX146 only, reference buffer enabled)

 

VREF Output Voltage

 

TA = +25°C

2.480

2.500

2.520

V

 

VREF Short-Circuit Current

 

 

 

 

30

mA

 

 

 

 

 

 

 

 

 

 

 

MAX146_C

 

±30

±50

 

 

 

 

 

 

 

 

 

 

VREF Temperature Coefficient

 

MAX146_E

 

±30

±60

ppm/°C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146_M

 

±30

±80

 

 

 

 

 

 

 

 

 

 

Load Regulation (Note 7)

 

0mA to 0.2mA output load

 

0.35

 

mV

 

 

 

 

 

 

 

 

 

Capacitive Bypass at VREF

 

Internal compensation mode

0

 

 

µF

 

 

 

 

 

 

 

 

External compensation mode

4.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Capacitive Bypass at REFADJ

 

 

0.047

 

 

µF

 

 

 

 

 

 

 

 

 

REFADJ Adjustment Range

 

 

 

±1.5

 

%

 

 

 

 

 

 

 

 

 

EXTERNAL REFERENCE AT VREF (Buffer

disabled)

 

 

 

 

 

 

 

 

 

 

 

 

 

VREF Input Voltage Range

 

 

1.0

 

VDD +

V

 

(Note 8)

 

 

 

50mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VREF Input Current

 

VREF = 2.500V

 

100

150

µA

 

 

 

 

 

 

 

 

 

VREF Input Resistance

 

 

18

25

 

 

 

 

 

 

 

 

 

 

Shutdown VREF Input Current

 

 

 

0.01

10

µA

 

 

 

 

 

 

 

 

 

REFADJ Buffer Disable Threshold

 

 

VDD -

 

 

V

 

 

 

0.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXTERNAL REFERENCE AT REFADJ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Capacitive Bypass at VREF

 

Internal compensation mode

0

 

 

µF

 

 

 

 

 

 

 

 

External compensation mode

4.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reference Buffer Gain

 

MAX146

 

2.06

 

V/V

 

 

 

 

 

 

 

 

MAX147

 

2.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REFADJ Input Current

 

MAX146

 

 

±50

µA

 

 

 

 

 

 

 

 

MAX147

 

 

±10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146/MAX147

_______________________________________________________________________________________ 3

MAX146/MAX147

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

ELECTRICAL CHARACTERISTICS (continued)

(VDD = +2.7V to +3.6V (MAX146); VDD = +2.7V to +5.25V (MAX147); COM = 0V; fSCLK = 2.0MHz; external clock (50% duty cycle); 15 clocks/conversion cycle (133ksps); MAX146—4.7µF capacitor at VREF pin; MAX147—external reference, VREF = 2.500V applied to VREF pin; TA = TMIN to TMAX; unless otherwise noted.)

PARAMETER

SYMBOL

 

 

 

 

CONDITIONS

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL INPUTS (DIN, SCLK,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CS,

SHDN)

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input High Voltage

 

VIH

 

VDD 3.6V

 

2.0

 

 

V

 

 

VDD > 3.6V, MAX147 only

3.0

 

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Low Voltage

 

VIL

 

 

 

 

 

 

 

 

 

0.8

V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Hysteresis

 

VHYST

 

 

 

 

 

 

 

 

0.2

 

V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Leakage

 

IIN

 

 

VIN = 0V or VDD

 

 

±0.01

±1

µA

DIN, SCLK, CS Input Capacitance

 

CIN

 

(Note 9)

 

 

 

15

pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHDN Input High Voltage

 

VSH

 

 

 

 

 

 

 

VDD - 0.4

 

 

V

SHDN Input Mid Voltage

 

VSM

 

 

 

 

 

 

 

1.1

 

VDD - 1.1

V

SHDN Input Low Voltage

 

VSL

 

 

 

 

 

 

 

 

 

0.4

V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHDN Input Current

 

IS

 

 

= 0V or VDD

 

 

 

±4.0

µA

 

SHDN

 

 

 

SHDN Voltage, Floating

 

VFLT

 

 

SHDN

= FLOAT

 

 

VDD / 2

 

V

SHDN Maximum Allowed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHDN = FLOAT

 

 

 

±100

nA

Leakage, Mid Input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL OUTPUTS (DOUT, SSTRB)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output Voltage Low

 

VOL

 

 

ISINK = 5mA

 

 

 

0.4

V

 

 

 

ISINK = 16mA

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

 

Output Voltage High

 

VOH

 

 

ISOURCE = 0.5mA

 

VDD - 0.5

 

 

V

Three-State Leakage Current

 

IL

 

CS = VDD

 

 

±0.01

±10

µA

Three-State Output Capacitance

 

COUT

 

 

CS = VDD (Note 9)

 

 

 

15

pF

POWER REQUIREMENTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Positive Supply Voltage

 

VDD

 

 

MAX146

 

2.70

 

3.60

V

 

 

 

 

 

 

 

 

 

 

 

 

MAX147

 

2.70

 

5.25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating mode, full-scale input

 

1.2

2.0

mA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Positive Supply Current, MAX146

 

IDD

 

 

VDD = 3.6V

Fast power-down

 

30

70

µA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Full power-down

 

1.2

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Positive Supply Current, MAX147

 

IDD

 

 

Operating mode,

 

VDD = 5.25V

 

1.8

2.5

mA

 

 

 

full-scale input

 

VDD = 3.6V

 

0.9

1.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD = 5.25V

 

2.1

15

µA

Positive Supply Current, MAX147

 

IDD

 

 

Full power-down

 

 

 

 

 

µA

 

 

VDD = 3.6V

 

1.2

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Rejection (Note 10)

 

PSR

 

Full-scale input, external reference = 2.500V,

 

±0.3

 

mV

 

 

VDD = 2.7V to VDD(MAX)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 _______________________________________________________________________________________

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

TIMING CHARACTERISTICS

(VDD = +2.7V to +3.6V (MAX146); VDD = +2.7V to +5.25V (MAX147); TA = TMIN to TMAX; unless otherwise noted.)

PARAMETER

 

SYMBOL

 

CONDITIONS

 

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

 

Acquisition Time

 

tACQ

 

 

 

1.5

 

 

µs

 

 

 

 

 

 

 

 

 

 

DIN to SCLK Setup

tDS

 

 

 

100

 

 

ns

 

 

 

 

 

 

 

 

 

 

DIN to SCLK Hold

 

tDH

 

 

 

0

 

 

ns

 

 

 

 

 

 

 

 

 

 

SCLK Fall to Output Data Valid

 

tDO

Figure 1

MAX14_ _C/E

 

20

 

200

ns

 

 

 

 

 

 

MAX14Figure 1 _M

 

20

 

240

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CS Fall to Output Enable

 

tDV

Figure 1

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

 

CS Rise to Output Disable

 

tTR

Figure 2

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

 

CS to SCLK Rise Setup

 

tCSS

 

 

 

100

 

 

ns

 

 

 

 

 

 

 

 

 

 

CS to SCLK Rise Hold

 

tCSH

 

 

 

0

 

 

ns

SCLK Pulse Width High

 

tCH

 

 

 

200

 

 

ns

 

 

 

 

 

 

 

 

 

 

SCLK Pulse Width Low

 

tCL

 

 

 

200

 

 

ns

 

 

 

 

 

 

 

 

 

 

SCLK Fall to SSTRB

 

tSSTRB

Figure 1

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

 

CS Fall to SSTRB Output Enable

 

tSDV

External clock mode only, Figure 1

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

 

CS Rise to SSTRB Output Disable

 

tSTR

External clock mode only, Figure 2

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

 

SSTRB Rise to SCLK Rise

 

tSCK

Internal clock mode only (Note 9)

0

 

 

ns

 

 

 

 

 

 

 

 

 

 

Note 1: Tested at VDD = 2.7V; COM = 0V; unipolar single-ended input mode.

Note 2: Relative accuracy is the deviation of the analog value at any code from its theoretical value after the full-scale range has been calibrated.

Note 3: MAX146—internal reference, offset nulled; MAX147—external reference (VREF = +2.500V), offset nulled. Note 4: Ground “on” channel; sine wave applied to all “off” channels.

Note 5: Conversion time defined as the number of clock cycles multiplied by the clock period; clock has 50% duty cycle. Note 6: The common-mode range for the analog inputs is from AGND to VDD.

Note 7: External load should not change during conversion for specified accuracy. Note 8: ADC performance is limited by the converter’s noise floor, typically 300µVp-p. Note 9: Guaranteed by design. Not subject to production testing.

Note 10: Measured as |VFS(2.7V) - VFS(VDD, MAX)|.

__________________________________________Typical Operating Characteristics

(VDD = 3.0V, VREF = 2.500V, fSCLK = 2.0MHz, CLOAD = 20pF, TA = +25°C, unless otherwise noted.)

INTEGRAL NONLINEARITY

INTEGRAL NONLINEARITY

INTEGRAL NONLINEARITY

vs. CODE

vs. SUPPLY VOLTAGE

vs. TEMPERATURE

 

0.5

 

 

 

MAX146/47-01

 

0.50

 

 

 

 

 

MAX146/47-02

 

0.50

VDD = 2.7V

 

 

 

MAX146/47-03

 

 

0.4

 

 

 

 

0.45

 

 

 

 

 

 

0.45

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.3

 

 

 

 

 

0.40

 

 

MAX146

 

 

 

 

0.40

 

 

 

 

 

 

 

0.2

 

 

 

 

 

0.35

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)

0.1

 

 

 

 

(LSB)

0.30

 

 

 

 

 

 

(LSB)

0.30

MAX146

 

 

 

 

0

 

 

 

 

0.25

 

 

 

 

 

 

0.25

 

 

 

 

 

 

INL

 

 

 

 

INL

 

 

 

 

 

 

INL

 

 

 

 

 

 

-0.1

 

 

 

 

0.20

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX147

 

 

 

 

 

 

MAX147

 

 

 

 

-0.2

 

 

 

 

 

0.15

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.3

 

 

 

 

 

0.10

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

-0.4

 

 

 

 

 

0.05

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

-0.5

 

 

 

 

 

0

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

1024

2048

3072

4096

 

2.25

2.75

3.25

3.75

4.25

4.75

5.25

 

-60

-20

20

60

100

140

 

 

 

 

CODE

 

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

TEMPERATURE (°C)

 

 

 

 

 

 

_______________________________________________________________________________________

5

MAX146/MAX147

MAX146/MAX147

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

____________________________Typical Operating Characteristics (continued)

(VDD = 3.0V, VREF = 2.500V, fSCLK = 2.0MHz, CLOAD = 20pF, TA = +25°C, unless otherwise noted.)

SUPPLY CURRENT

SHUTDOWN SUPPLY CURRENT

MAX146

INTERNAL REFERENCE VOLTAGE

vs. SUPPLY VOLTAGE

vs. SUPPLY VOLTAGE

vs. SUPPLY VOLTAGE

 

 

 

2.00

RL =

 

 

 

 

MAX146/47-04

 

3.5

 

 

FULL POWER-DOWN

MAX146/47-05

2.5020

 

 

 

 

 

MAX146/47-06

 

 

 

 

CLOAD = 50pF

 

 

 

 

 

 

 

 

 

 

 

1.75

CODE = 101010100000

(μA)

3.0

 

 

 

 

 

2.5015

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUPPLY CURRENT (mA)

1.50

 

 

 

 

 

 

 

SHUTDOWNSUPPLY CURRENT

2.5

 

 

 

 

 

 

2.5010

 

 

 

 

 

 

MAX146

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.25

 

 

 

 

 

 

 

1.5

 

 

 

 

 

 

2.5005

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.00

 

 

 

 

CLOAD = 20pF

 

1.0

 

 

 

 

 

 

2.5000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VREF(V)

 

 

 

 

 

 

0.75

 

 

 

 

 

 

 

0.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX147

 

 

 

 

 

 

 

 

 

 

 

2.4995

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.50

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

2.4990

 

 

 

 

 

 

 

2.25

2.75

3.25

3.75

4.25

4.75

5.25

 

2.25

2.75

3.25

3.75

4.25

4.75

5.25

2.25

2.75

3.25

3.75

4.25

4.75

5.25

 

 

 

 

 

 

SUPPLY VOLTAGE (V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHUTDOWN CURRENT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146

 

 

 

 

 

 

SUPPLY CURRENT vs. TEMPERATURE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INTERNAL REFERENCE VOLTAGE

 

 

 

 

 

 

 

2.0

 

 

 

 

vs. TEMPERATURE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

vs. TEMPERATURE

 

 

1.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146/47-07

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX1247-08

2.501

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146/47-09

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.500

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CURRENTSHUTDOWN(μA)

1.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD = 3.6V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CURRENTSUPPLY(mA)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(V)VREF

2.499

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX147

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.496

 

 

 

 

 

 

 

 

 

 

 

VDD = 2.7V

 

 

 

 

 

 

 

1.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.498

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.497

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.495

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RLOAD =

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.8

CODE = 101010100000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.494

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-60

-20

20

 

 

60

 

 

100

140

 

 

 

 

-60

-20

20

60

 

100

 

140

 

-60

-20

20

60

 

 

100

 

140

 

 

 

 

 

 

 

TEMPERATURE (°C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMPERATURE (°C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMPERATURE (°C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EFFECTIVE NUMBER OF BITS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FFT PLOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

vs. FREQUENCY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146/47-10

 

 

 

 

 

 

 

 

 

12.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX146/47-11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

fIN

= 10kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD = 2.7V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD = 2.7V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(dB)

-20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

fSAMPLE = 133kHz

 

 

 

 

 

 

 

 

 

 

 

 

11.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AMPLITUDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENOB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-120

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

0

 

10

20

 

30

 

40

 

 

50

60

70

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FREQUENCY (kHz)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FREQUENCY (kHz)

 

 

 

 

 

 

 

 

 

 

 

 

 

6 _______________________________________________________________________________________

Maxim MAX147BEAP, MAX147BCDP, MAX147BCAP, MAX147AMJP, MAX147AEPP Datasheet

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

____________________________Typical Operating Characteristics (continued)

(VDD = 3.0V, VREF = 2.500V, fSCLK = 2.0MHz, CLOAD = 20pF, TA = +25°C, unless otherwise noted.)

 

 

 

 

 

 

 

 

 

 

 

 

 

GAIN ERROR

 

 

 

 

CHANNEL-TO-CHANNEL GAIN MATCHING

 

 

OFFSET vs. SUPPLY VOLTAGE

 

 

 

vs. SUPPLY VOLTAGE

 

 

 

 

 

 

vs. SUPPLY VOLTAGE

 

 

 

0.50

 

 

 

 

 

 

 

MAX146/47-12

 

0.50

 

 

 

 

 

MAX146/47-13

 

0.50

 

 

 

 

 

 

 

 

MAX146/47-14

 

0.45

 

 

 

 

 

 

 

 

0.45

 

 

 

 

 

 

0.45

 

 

 

 

 

 

 

 

(LSB)OFFSET

0.40

 

 

 

 

 

 

 

 

(LSB)ERRORGAIN

0.40

 

 

 

 

 

 

(LSB)MATCHINGGAIN

0.40

 

 

 

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

0.35

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.30

 

 

 

 

 

 

 

 

 

0.30

 

 

 

 

 

 

 

0.30

 

 

 

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

0

2.75

3.25

3.75

4.25

4.75

5.25

 

0

 

 

 

 

 

 

 

 

 

 

2.25

2.75

3.25

3.75

4.25

 

4.75

5.25

 

2.25

 

2.25

2.75

 

3.25

3.75

4.25

 

4.75

5.25

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GAIN ERROR

 

 

 

 

CHANNEL-TO-CHANNEL GAIN MATCHING

 

 

OFFSET vs. TEMPERATURE

 

 

 

 

vs. TEMPERATURE

 

 

 

 

 

 

vs. TEMPERATURE

 

 

 

0.50

 

 

 

 

 

 

 

MAX146/47-15

 

0.50

 

 

 

 

 

MAX146/47-16

 

0.50

 

 

 

 

 

 

 

 

MAX146/47-17

 

0.45

 

 

 

 

 

 

 

 

0.45

 

 

 

 

 

 

0.45

 

 

 

 

 

 

 

 

(LSB)OFFSET

0.40

 

 

 

 

 

 

 

 

(LSB)ERRORGAIN

0.40

 

 

 

 

 

 

(LSB)MATCHINGGAIN

0.40

 

 

 

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

0.35

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.30

 

 

 

 

 

 

 

 

 

0.30

 

 

 

 

 

 

 

0.30

 

 

 

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

0.20

 

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

-55

-30

-5

20

45

70

95

120

145

 

-55

-30

-5 20 45 70 95

120 145

 

 

-55

-30

-5

20

45

70

95

120

145

 

 

 

TEMPERATURE (˚C)

 

 

 

 

 

 

TEMPERATURE (˚C)

 

 

 

 

 

 

 

TEMPERATURE (˚C)

 

 

 

 

 

 

CHANNEL-TO-CHANNEL OFFSET MATCHING

 

 

 

 

 

CHANNEL-TO-CHANNEL OFFSET MATCHING

 

 

 

 

 

 

 

 

 

vs. SUPPLY VOLTAGE

 

 

 

 

 

 

 

 

 

vs. TEMPERATURE

 

 

 

 

 

 

 

 

0.50

 

 

 

 

 

 

 

MAX146/47-18

 

 

 

 

 

0.50

 

 

 

 

 

 

 

MAX146/47-19

 

 

 

 

 

 

0.45

 

 

 

 

 

 

 

 

 

 

 

 

0.45

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)

0.40

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)

0.40

 

 

 

 

 

 

 

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

 

 

 

 

0.35

 

 

 

 

 

 

 

 

 

 

 

 

 

MATCHING

0.30

 

 

 

 

 

 

 

 

 

 

 

 

MATCHING

0.30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

 

 

 

 

 

 

0.25

 

 

 

 

 

 

 

 

 

 

 

 

 

OFFSET

0.20

 

 

 

 

 

 

 

 

 

 

 

 

OFFSET

0.20

 

 

 

 

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

2.75

3.25

3.75

4.25

4.75

5.25

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.25

 

 

 

 

 

-55

-30

-5

20

45

70

95

120

145

 

 

 

 

 

 

 

 

 

 

 

VDD (V)

 

 

 

 

 

 

 

 

 

TEMPERATURE (˚C)

 

 

 

 

 

MAX146/MAX147

_______________________________________________________________________________________ 7

MAX146/MAX147

+2.7V, Low-Power, 8-Channel,

Serial 12-Bit ADCs

______________________________________________________________Pin Description

PIN

NAME

FUNCTION

 

 

 

1–8

CH0–CH7

Sampling Analog Inputs

 

 

 

9

COM

Ground reference for analog inputs. COM sets zero-code voltage in single-ended mode. Must be

stable to ±0.5LSB.

 

 

 

 

 

 

 

Three-Level Shutdown Input. Pulling SHDN low shuts the MAX146/MAX147 down; otherwise, they are

10

SHDN

fully operational. Pulling SHDN high puts the reference-buffer amplifier in internal compensation mode.

 

 

Letting SHDN float puts the reference-buffer amplifier in external compensation mode.

 

 

 

 

 

Reference-Buffer Output/ADC Reference Input. Reference voltage for analog-to-digital conversion.

11

VREF

In internal reference mode (MAX146 only), the reference buffer provides a 2.500V nominal output,

externally adjustable at REFADJ. In external reference mode, disable the internal buffer by pulling

 

 

 

 

REFADJ to VDD.

12

REFADJ

Input to the Reference-Buffer Amplifier. To disable the reference-buffer amplifier, tie REFADJ to VDD.

13

AGND

Analog Ground

 

 

 

14

DGND

Digital Ground

 

 

 

15

DOUT

Serial Data Output. Data is clocked out at SCLK’s falling edge. High impedance when CS is high.

 

 

 

 

 

Serial Strobe Output. In internal clock mode, SSTRB goes low when the MAX146/MAX147 begin the

16

SSTRB

A/D conversion, and goes high when the conversion is finished. In external clock mode, SSTRB pulses

high for one clock period before the MSB decision. High impedance when CS is high (external clock

 

 

 

 

mode).

 

 

 

17

DIN

Serial Data Input. Data is clocked in at SCLK’s rising edge.

 

 

 

18

CS

Active-Low Chip Select. Data will not be clocked into DIN unless CS is low. When CS is high, DOUT is

high impedance.

 

 

 

 

 

19

SCLK

Serial Clock Input. Clocks data in and out of serial interface. In external clock mode, SCLK also sets

the conversion speed. (Duty cycle must be 40% to 60%.)

 

 

 

 

 

20

VDD

Positive Supply Voltage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD

DOUT

 

 

 

DOUT

 

 

 

6k

 

DOUT

 

 

 

DOUT

 

 

 

6k

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOAD

 

 

 

 

 

 

 

CLOAD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOAD

 

 

 

 

 

 

 

CLOAD

 

6k

 

 

 

 

 

 

 

 

 

 

 

 

6k

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50pF

 

 

 

 

 

 

 

50pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50pF

 

 

 

 

 

 

 

50pF

 

 

 

 

 

 

DGND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DGND

 

 

 

 

 

 

 

 

DGND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DGND

a) High-Z to VOH and VOL to VOH

 

 

b) High-Z to VOL and VOH to VOL

 

 

 

 

 

 

 

a) VOH to High-Z

 

 

 

 

b) VOL to High-Z

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 1. Load Circuits for Enable Time Figure 2. Load Circuits for Disable Time

8 _______________________________________________________________________________________

Loading...
+ 16 hidden pages