Maxim MAX1110C-D, MAX1111MJE, MAX1111EPE, MAX1111CEE, MAX1110MJP Datasheet

...
0 (0)
Maxim MAX1110C-D, MAX1111MJE, MAX1111EPE, MAX1111CEE, MAX1110MJP Datasheet

KIT

EVALUATION

AVAILABLE

Description

-power, 8-bit, 8-chan- (ADCs) that feature an clock, and serial a single +2.7V to +5.5V

while sampling at rates 8 analog inputs and the software-configurable, single-ended/differential

are performed an external serial-inter- input range is deterreference, or by an from 1V to VDD. with the SPI™, -interface standards.

the end-of-conversion

.

a software-program- down mode to minimize -down, the supply and only 52µA at be controlled using the

serial interface automat-

ically powers up the device.

The MAX1110 is available in 20-pin SSOP and DIP packages. The MAX1111 is available in small 16-pin QSOP and DIP packages.

________________________Applications

Portable Data Logging

Hand-Held Measurement Devices

Medical Instruments

System Diagnostics

Solar-Powered Remote Systems

4–20mA-Powered Remote

Data-Acquisition Systems

Pin Configurations appear at end of data sheet.

SPI and QSPI are trademarks of Motorola, Inc.

MICROWIRE is a trademark of National Semiconductor Corp.

Serial 8-Bit ADCs

____________________________Features

+2.7V to +5.5V Single Supply

Low Power: 85µA at 50ksps

6µA at 1ksps

8-Channel Single-Ended or 4-Channel Differential Inputs (MAX1110)

4-Channel Single-Ended or 2-Channel Differential Inputs (MAX1111)

Internal Track/Hold; 50kHz Sampling Rate

Internal 2.048V Reference

SPI/QSPI/MICROWIRE-Compatible Serial Interface

Software-Configurable Unipolar or Bipolar Inputs

Total Unadjusted Error: ±1LSB max

±0.3LSB typ

Ordering Information

PART

TEMP. RANGE

PIN-PACKAGE

 

 

 

MAX1110CPP

0°C to +70°C

20 Plastic DIP

MAX1110CAP

0°C to +70°C

20 SSOP

 

 

 

MAX1110C/D

0°C to +70°C

Dice*

 

 

 

*Dice are specified at TA = +25°C, DC parameters only.

Ordering Information continued at end of data sheet.

________________Functional Diagram

CS

 

 

 

 

SCLK

 

 

 

 

 

INPUT

 

INT

 

DIN

SHIFT

 

CLOCK

 

 

REGISTER

CONTROL

 

 

SHDN

 

LOGIC

 

 

CH0

 

 

OUTPUT

DOUT

CH1

 

 

 

 

SHIFT

 

CH2

ANALOG

 

REGISTER

SSTRB

CH3

T/H

 

 

CH4*

INPUT

CLOCK

 

MUX

 

CH5*

IN

 

 

 

8-BIT

 

CH6*

 

 

 

SAR ADC

 

CH7*

 

 

 

 

OUT

 

COM

 

 

REF

VDD

REFOUT

 

+2.048V

MAX1110

DGND

 

 

REFERENCE

AGND

 

 

 

MAX1111

REFIN

 

 

 

 

*MAX1110 ONLY

________________________________________________________________ Maxim Integrated Products 1

MAX1110/MAX1111

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800 For small orders, phone 1-800-835-8769.

MAX1110/MAX1111

+2.7V, Low-Power, Multichannel,

Serial 8-Bit ADCs

ABSOLUTE MAXIMUM RATINGS

VDD to AGND..............................................................

-0.3V to 6V

AGND to DGND .......................................................

-0.3V to 0.3V

CH0–CH7, COM, REFIN,

-0.3V to (VDD + 0.3V)

REFOUT to AGND ......................................

Digital Inputs to DGND ...............................................

-0.3V to 6V

Digital Outputs to DGND............................

-0.3V to (VDD + 0.3V)

Continuous Power Dissipation (TA = +70°C)

 

16 Plastic DIP (derate 10.53mW/°C above +70°C) ......

842mW

16 QSOP (derate 8.30mW/°C above +70°C)................

667mW

16 CERDIP (derate 10.00mW/°C above +70°C) ..........

800mW

20 Plastic DIP (derate 11.11mW/°C above +70°C)

......889mW

20 SSOP (derate 8.00mW/°C above +70°C)

................

640mW

20 CERDIP (derate 11.11mW/°C above +70°C) ..........

889mW

Operating Temperature Ranges

 

 

MAX1110C_P/MAX1111C_E................................

0°C to +70°C

MAX1110E_P/MAX1111E_E .............................

- 40°C to +85°C

MAX1110MJP/MAX1111MJE..........................

- 55°C to +125°C

Storage Temperature Range .............................

- 65°C to +150°C

Lead Temperature (soldering, 10sec) .............................

 

+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

(VDD = +2.7V to +5.5V; unipolar input mode; COM = 0V; fSCLK = 500kHz, external clock (50% duty cycle); 10 clocks/conversion cycle (50ksps); 1µF capacitor at REFOUT; TA = TMIN to TMAX; unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

 

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

 

DC ACCURACY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Resolution

 

 

 

8

 

 

Bits

 

 

 

 

 

 

 

 

 

 

Relative Accuracy (Note 1)

INL

VDD = 2.7V to 3.6V

 

±0.15

±0.5

LSB

 

 

 

 

 

 

 

VDD = 5.5V (Note 2)

 

 

±0.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Differential Nonlinearity

DNL

No missing codes over temperature

 

 

 

±1

LSB

 

 

 

 

 

 

 

 

 

 

Offset Error

 

VDD = 2.7V to 3.6V

 

±0.35

±1

LSB

 

 

 

 

 

 

 

 

 

VDD = 5.5V (Note 2)

 

 

±0.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gain Error (Note 3)

 

Internal or external reference

 

 

 

±1

LSB

 

 

 

 

 

 

 

 

 

 

Gain Temperature Coefficient

 

External reference, 2.048V

 

±0.8

 

ppm/°C

 

 

 

 

 

 

 

 

 

 

Total Unadjusted Error

TUE

 

 

 

±0.3

±1

LSB

 

 

 

 

 

 

 

 

 

 

Channel-to-Channel

 

 

 

 

±0.1

 

LSB

 

Offset Matching

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DYNAMIC SPECIFICATIONS (10.034kHz sine-

wave input, 2.048Vp-p, 50ksps, 500kHz external clock)

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal-to-Noise

SINAD

 

 

 

49

 

dB

 

and Distortion Ratio

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total Harmonic Distortion

THD

 

 

 

-70

 

dB

 

(up to the 5th harmonic)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Spurious-Free Dynamic Range

SFDR

 

 

 

68

 

dB

 

 

 

 

 

 

 

 

 

 

Channel-to-Channel Crosstalk

 

VCH_ = 2.048Vp-p, 25kHz (Note 4)

 

 

-75

 

dB

 

 

 

 

 

 

 

 

 

 

Small-Signal Bandwidth

 

-3dB rolloff

 

1.5

 

MHz

 

 

 

 

 

 

 

 

 

Full-Power Bandwidth

 

 

 

 

800

 

kHz

 

 

 

 

 

 

 

 

 

 

2 _______________________________________________________________________________________

+2.7V, Low-Power, Multichannel,

Serial 8-Bit ADCs

ELECTRICAL CHARACTERISTICS (continued)

(VDD = +2.7V to +5.5V; unipolar input mode; COM = 0V; fSCLK = 500kHz, external clock (50% duty cycle); 10 clocks/conversion cycle (50ksps); 1µF capacitor at REFOUT; TA = TMIN to TMAX; unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

 

 

CONVERSION RATE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Conversion Time (Note 5)

tCONV

Internal clock

 

 

25

55

µs

 

 

 

 

 

 

 

 

External clock, 500kHz, 10 clocks/conversion

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track/Hold Acquisition Time

tACQ

External clock, 2MHz

 

1

 

 

µs

 

 

 

 

 

 

 

 

 

 

 

Aperture Delay

 

 

 

 

 

10

 

ns

 

 

 

 

 

 

 

 

 

 

Aperture Jitter

 

 

 

 

 

<50

 

ps

 

 

 

 

 

 

 

 

 

 

 

Internal Clock Frequency

 

 

 

 

 

400

 

kHz

 

 

 

 

 

 

 

 

 

 

 

External Clock-Frequency Range

 

(Note 6)

 

50

 

500

kHz

 

 

 

 

 

 

 

 

 

 

 

Used for data transfer only

 

 

2

MHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ANALOG INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Voltage Range, Single-

 

Unipolar input, COM = 0V

0

 

VREFIN

 

 

 

 

 

 

 

 

 

V

 

 

 

 

 

 

 

COM ±

 

Ended and Differential (Note 7)

 

Bipolar input, COM = VREFIN / 2

 

 

 

 

 

VREFIN / 2

V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multiplexer Leakage Current

 

On/off-leakage current, VCH_ = 0V or VDD

 

±0.01

±1

µA

 

 

 

 

 

 

 

 

 

 

 

Input Capacitance

 

 

 

 

 

18

 

pF

 

 

 

 

 

 

 

 

 

 

 

INTERNAL REFERENCE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REFOUT Voltage

 

 

 

 

1.968

2.048

2.128

V

 

 

 

 

 

 

 

 

 

 

 

REFOUT Short-Circuit Current

 

 

 

 

 

3.5

 

mA

 

 

 

 

 

 

 

 

 

 

 

REFOUT Temperature Coefficient

 

 

 

 

 

±50

 

ppm/°C

 

 

 

 

 

 

 

 

 

Load Regulation (Note 8)

 

0mA to 0.5mA output load

 

2.5

 

mV

 

 

 

 

 

 

 

 

 

 

 

Capacitive Bypass at REFOUT

 

 

 

 

1

 

 

µF

 

 

 

 

 

 

 

 

 

 

 

EXTERNAL REFERENCE AT REFIN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Voltage Range

 

 

 

 

1

 

VDD +

V

 

 

 

 

 

 

50mV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Current

 

(Note 9)

 

 

1

20

µA

 

 

 

 

 

 

 

 

 

 

 

POWER REQUIREMENTS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Voltage

VDD

 

 

 

2.7

 

5.5

V

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD = 2.7V to 3.6V

 

Operating mode

 

85

250

 

 

 

 

Full-scale input

 

 

 

 

 

 

 

 

 

 

Reference disabled

 

45

 

 

 

 

 

CLOAD = 10pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Current (Note 2)

IDD

VDD = 5.5V

 

Operating mode

 

120

250

µA

 

Full-scale input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reference disabled

 

80

 

 

 

 

 

CLOAD = 10pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power-down

 

Software

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHDN at DGND

 

3.2

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power-Supply Rejection

PSR

VDD = 2.7V to 3.6V; external reference,

 

±0.4

±4

mV

(Note 10)

2.048V; full-scale input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX1110/MAX1111

_______________________________________________________________________________________ 3

MAX1110/MAX1111

+2.7V, Low-Power, Multichannel,

Serial 8-Bit ADCs

ELECTRICAL CHARACTERISTICS (continued)

(VDD = +2.7V to +5.5V; unipolar input mode; COM = 0V; fSCLK = 500kHz, external clock (50% duty cycle); 10 clocks/conversion cycle (50ksps); 1µF capacitor at REFOUT; TA = TMIN to TMAX; unless otherwise noted.)

PARAMETER

 

SYMBOL

CONDITIONS

 

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

 

 

DIGITAL INPUTS: DIN, SCLK, CS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input High Voltage

 

VIH

VDD 3.6V

 

2

 

 

V

 

 

 

 

 

 

 

 

VDD > 3.6V

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Low Voltage

 

VIL

 

 

 

 

0.8

V

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Hysteresis

 

VHYST

 

 

 

0.2

 

V

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Leakage

 

IIN

Digital inputs = 0V or VDD

 

 

 

±1

µA

 

 

 

 

 

 

 

 

 

 

 

DIN, SCLK, CS Input Capacitance

 

CIN

(Note 6)

 

 

15

pF

 

 

 

 

 

 

 

 

 

 

SHDN INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHDN Input High Voltage

 

VSH

 

 

VDD - 0.4

 

 

V

 

 

 

 

 

 

 

 

 

 

SHDN Input Mid-Voltage

 

VSM

 

 

1.1

 

VDD - 1.1

V

 

 

 

 

 

 

 

 

 

 

 

SHDN Voltage, Floating

 

VFLT

SHDN = open

 

VDD / 2

 

V

 

 

 

 

 

 

 

 

 

 

SHDN Input Low Voltage

 

VSL

 

 

 

 

0.4

V

 

 

 

 

 

 

 

 

 

 

 

SHDN Input Current

 

 

SHDN = 0V or VDD

 

 

 

±4

µA

 

 

 

 

 

 

 

 

 

 

 

SHDN Maximum Allowed Leakage

 

 

SHDN = open

 

 

±100

nA

for Mid-Input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL OUTPUTS: DOUT, SSTRB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output Low Voltage

 

VOL

ISINK = 5mA

 

 

0.4

V

 

 

 

 

 

 

 

 

 

ISINK = 16mA

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output High Voltage

 

VOH

ISOURCE = 0.5mA

 

VDD - 0.5

 

 

V

 

 

 

 

 

 

 

 

 

 

 

Three-State Leakage Current

 

IL

CS = VDD

 

 

±0.01

±10

µA

 

 

 

 

 

 

 

 

 

 

 

Three-State Output Capacitance

 

COUT

CS = VDD (Note 6)

 

 

15

pF

 

 

 

 

 

 

 

 

 

 

4 _______________________________________________________________________________________

+2.7V, Low-Power, Multichannel,

Serial 8-Bit ADCs

TIMING CHARACTERISTICS (Figures 8 and 9)

(VDD = +2.7V to +5.5V, TA = TMIN to TMAX, unless otherwise noted.)

PARAMETER

SYMBOL

CONDITIONS

 

MIN

TYP

MAX

UNITS

 

 

 

 

 

 

 

 

 

Track/Hold Acquisition Time

tACQ

 

 

 

1

 

 

µs

 

 

 

 

 

 

 

 

 

DIN to SCLK Setup

tDS

 

 

 

100

 

 

ns

 

 

 

 

 

 

 

 

 

DIN to SCLK Hold

tDH

 

 

 

0

 

 

ns

 

 

 

 

 

 

 

 

 

SCLK Fall to Output Data Valid

tDO

Figure 1,

MAX111_C/E

 

20

 

200

ns

CLOAD = 100pF

MAX111_M

 

20

 

240

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CS Fall to Output Enable

tDV

Figure 1, CLOAD = 100pF

 

 

240

ns

 

 

 

 

 

 

 

 

CS Rise to Output Disable

tTR

Figure 2, CLOAD = 100pF

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

CS to SCLK Rise Setup

tCSS

 

 

 

100

 

 

ns

 

 

 

 

 

 

 

 

 

CS to SCLK Rise Hold

tCSH

 

 

 

0

 

 

ns

 

 

 

 

 

 

 

 

 

SCLK Pulse Width High

tCH

 

 

 

200

 

 

ns

 

 

 

 

 

 

 

 

 

SCLK Pulse Width Low

tCL

 

 

 

200

 

 

ns

 

 

 

 

 

 

 

 

 

SCLK Fall to SSTRB

tSSTRB

CLOAD = 100pF

 

 

 

 

240

ns

 

 

 

 

 

 

 

 

 

CS Fall to SSTRB Output Enable

tSDV

Figure 1, external clock mode only,

 

 

 

240

ns

(Note 6)

CLOAD = 100pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CS Rise to SSTRB Output

tSTR

Figure 2, external clock mode only,

 

 

 

240

ns

Disable (Note 6)

CLOAD = 100pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SSTRB Rise to SCLK Rise

tSCK

Figure 11, internal clock mode only

 

0

 

 

ns

(Note 6)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wake-Up Time

tWAKE

External reference

 

 

 

20

 

µs

 

 

 

 

 

 

 

Internal reference (Note 11)

 

 

12

 

ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note 1: Relative accuracy is the analog value’s deviation (at any code) from its theoretical value after the full-scale range is calibrated.

Note 2: See Typical Operating Characteristics.

Note 3: VREFIN = 2.048V, offset nulled.

Note 4: On-channel grounded; sine wave applied to all off-channels.

Note 5: Conversion time is defined as the number of clock cycles multiplied by the clock period; clock has 50% duty cycle. Note 6: Guaranteed by design. Not subject to production testing.

Note 7: Common-mode range for the analog inputs is from AGND to VDD.

Note 8: External load should not change during the conversion for specified accuracy. Note 9: External reference at 2.048V, full-scale input, 500kHz external clock.

Note 10: Measured as | VFS (2.7V) - VFS (3.6V) |.

Note 11: 1µF at REFOUT; internal reference settling to 0.5LSB.

MAX1110/MAX1111

_______________________________________________________________________________________ 5

MAX1110/MAX1111

+2.7V, Low-Power, Multichannel,

Serial 8-Bit ADCs

__________________________________________Typical Operating Characteristics

(VDD = +2.7V; fSCLK = 500kHz; external clock (50% duty cycle); RL = ; TA = +25°C, unless otherwise noted.)

SUPPLY CURRENT (μA)

SUPPLY CURRENT vs. SUPPLY VOLTAGE

400

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

01

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-

 

 

OUTPUT CODE = 10101010

 

 

 

 

 

MAX1110

 

 

 

 

 

 

 

 

350

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

300

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

250

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

LOAD =

 

60pF

 

 

 

 

 

 

 

 

 

 

200

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOAD = 30pF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.0

 

 

 

 

 

 

 

 

 

 

 

 

 

2.5

3.5

4.0

4.5

5.0

5.5

6.0

SUPPLY VOLTAGE (V)

SUPPLY CURRENT (μA)

SUPPLY CURRENT vs. TEMPERATURE

160

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

02

 

 

CLOAD

= 10pF

 

 

 

 

 

 

 

-

 

 

 

FULL SCALE

 

 

 

 

MAX1110

 

 

OUTPUT

CODE =

 

 

 

 

 

140

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

120

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD = 5.5V

 

 

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD

 

= 3.6V

 

 

80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-60

-20

20

60

100

140

TEMPERATURE (°C)

SHUTDOWN SUPPLY CURRENT (μA)

5.0

4.5

4.0

3.5

3.0

2.5

2.0

SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE

 

-03

SHDN = DGND

MAX1110

 

-60

-20

20

60

100

140

TEMPERATURE (°C)

 

 

OFFSET ERROR vs. SUPPLY VOLTAGE

 

 

 

INTEGRAL NONLINEARITY vs.

 

 

 

 

 

DIFFERENTIAL NONLINEARITY

 

 

 

 

 

 

 

 

 

SUPPLY VOLTAGE

 

 

 

 

 

 

 

 

 

vs. CODE

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX1110-04

 

0.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX1110-05

 

0.3

 

 

 

 

 

 

 

 

MAX1110-06

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)ERROROFFSET

0.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)INL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)DNL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

0.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

 

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

 

0

64

128

192

256

 

 

 

 

 

SUPPLY VOLTAGE (V)

 

 

 

 

 

 

 

 

 

SUPPLY VOLTAGE (V)

 

 

 

 

 

 

 

 

 

DIGITAL CODE

 

 

 

 

 

 

 

 

 

 

OFFSET ERROR vs. TEMPERATURE

 

 

 

 

 

INTEGRAL NONLINEARITY

 

 

 

 

 

FFT PLOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

vs. CODE

 

 

 

 

 

 

 

 

 

 

 

 

0.6

 

 

 

 

 

 

 

 

 

 

 

 

 

MAX1110-07

 

0.20

 

 

 

 

 

 

 

 

MAX1110-08

20

 

 

 

 

 

 

 

 

 

MAX1110-09

 

0.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.15

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)ERROROFFSET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(LSB)INL

0.10

 

 

 

 

 

 

 

 

(dB)AMPLITUDE

 

 

 

 

 

 

 

 

 

 

0.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

 

 

 

-20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

-40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.05

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.10

 

 

 

 

 

 

 

 

 

-80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-0.20

 

 

 

 

 

 

 

 

 

-100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-60

-20

20

60

140

 

0

64

128

192

256

0

5

10

15

20

25

 

 

 

 

 

 

 

 

TEMPERATURE (°C)

 

 

 

 

 

 

 

 

 

DIGITAL CODE

 

 

 

 

 

 

 

FREQUENCY (kHz)

 

 

 

 

6 _______________________________________________________________________________________

Loading...
+ 14 hidden pages