Maxim Integrated Producs DG413DY, DG413DK, DG413DJ, DG413CY, DG413CUE Datasheet

19-4728; Rev 3; 9/99

_______________General Description

Maxim’s redesigned DG411/DG412/DG413 analog switches now feature low on-resistance matching between switches (3Ω max) and guaranteed on-resis- tance flatness over the signal range (∆4Ω max). These low on-resistance switches conduct equally well in either direction. They guarantee low charge injection, low power consumption, and an ESD tolerance of 2000V minimum per Method 3015.7. The new design offers lower off leakage current over temperature (less than 5nA at +85°C).

The DG411/DG412/DG413 are quad, single-pole/sin- gle-throw (SPST) analog switches. The DG411 is normally closed (NC), and the DG412 is normally open (NO). The DG413 has two NC switches and two NO switches. Switching times are less than 150ns max for tON and less than 100ns max for tOFF. These devices operate from a single +10V to +30V supply, or bipolar ±4.5V to ±20V supplies. Maxim’s improved DG411/DG412/DG413 are fabricated with a 44V silicongate process.

Improved, Quad,

SPST Analog Switches

______________________New Features

♦Plug-In Upgrade for Industry-Standard DG411/DG412/DG413

♦Improved rDS(ON) Match Between Channels (3Ω max)

♦Guaranteed rFLAT(ON) Over Signal Range (∆4Ω)

♦Improved Charge Injection (10pC max)

♦Improved Off Leakage Current Over Temperature (<5nA at +85°C)

♦Withstand Electrostatic Discharge (2000V min) per Method 3015.7

__________________Existing Features

♦Low rDS(ON) (35Ω max)

♦Single-Supply Operation +10V to +30V

♦Bipolar-Supply Operation ±4.5V to ±20V

♦Low Power Consumption (35µW max)

♦Rail-to-Rail Signal Handling

♦TTL/CMOS-Logic Compatible

________________________Applications

Sample-and-Hold Circuits	Communication Systems
Test Equipment	Battery-Operated Systems
Heads-Up Displays	PBX, PABX
Guidance & Control Systems	Audio Signal Routing
Military Radios

______________Ordering Information

PART	TEMP. RANGE	PIN-PACKAGE
DG411CJ	0°C to +70°C	16 Plastic DIP
DG411CUE	0°C to +70°C	16 TSSOP
DG411CY	0°C to +70°C	16 Narrow SO
DG411C/D	0°C to +70°C	Dice*

Ordering Information continued at end of data sheet.

*Contact factory for dice specifications.

_____________________Pin Configurations/Functional Diagrams/Truth Tables

TOP VIEW

IN1	1		16	IN2	IN1	1		16	IN2	IN1	1		16	IN2
D1	2		15	D2	D1	2		15	D2	D1	2		15	D2
S1	3		14	S2	S1	3		14	S2	S1	3		14	S2
V- 4			13	V+	V- 4			13	V+	V- 4			13	V+
GND	5	D G 4 1 1	12	VL	GND	5	D G 4 1 2	12	VL	GND	5	D G 4 1 3	12	VL
S4	6		11	S3	S4	6		11	S3	S4	6		11	S3
D4	7		10	D3	D4	7		10	D3	D4	7		10	D3
IN4	8		9	IN3	IN4	8		9	IN3	IN4	8		9	IN3
	DIP/SO/TSSOP						DIP/SO/TSSOP					DIP/SO/TSSOP
		DG411					DG412					DG413	SWITCHES
	LOGIC	SWITCH					LOGIC	SWITCH			LOGIC	SWITCHES
	0	ON					0	OFF				1, 4		2, 3
											0	OFF		ON
	1	OFF					1	ON
											1	ON		OFF

SWITCHES SHOWN FOR LOGIC “0” INPUT

________________________________________________________________ Maxim Integrated Products 1

DG411/DG412/DG413

For free samples & the latest literature: http://www.maxim-ic.com, or phone [phone]. For small orders, phone [phone].

DG411/DG412/DG413

Improved, Quad,

SPST Analog Switches

ABSOLUTE MAXIMUM RATINGS

Voltage Referenced to V-
V+.........................................................................................		44V
GND .....................................................................................		25V
VL .....................................................	(GND -0.3V) to (V+ +0.3V)
Digital Inputs, VS, VD (Note 1)........	(V- -2V) to (V+ +2V) or 30mA
		(whichever occurs first)
Continuous Current (any terminal) ......................................		30mA
Peak Current
(pulsed at 1ms, 10% duty cycle max)		............................100mA

Continuous Power Dissipation (TA = +70°C)

16-Pin Plastic DIP (derate 10.53mW/°C above +70°C) .842mW

16-Pin Narrow SO (derate 8.70mW/°C above +70°C)		...696mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C)......		800mW
16-Pin TSSOP (derate 6.7mW/°C above +70°C) ...........		457mW
Operating Temperature Ranges
DG41_C_ ..............................................................	0°C to +70°C
DG41_D_ ...........................................................	-40°C to +85°C
DG41_AK_ .......................................................	-55°C to +125°C
Storage Temperature Range .............................	-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................		+300°C

Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current rating.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS—Dual Supplies

(V+ = 15V, V- = -15V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)

PARAMETER	SYMBOL	CONDITIONS			MIN	TYP	MAX	UNITS
						(Note 2)
SWITCH
Analog Signal Range	VANALOG	(Note 3)			-15		15	V
		V+ = 13.5V,	TA = +25°C	C, D		17	45
Drain-Source		V- = -13.5V,
	rDS(ON)			A		17	30	Ω
On-Resistance		VD = ±8.5V,
			TA = TMIN to TMAX				45
		IS = -10mA
On-Resistance	∆rDS(ON)	V+ = 15V, V- = -15V,	TA = +25°C				3	Ω
Match Between Channels		VD = ±10V,
			TA = TMIN to TMAX				5
(Note 4)		IS = -10mA
On-Resistance Flatness		V+ = 15V, V- = -15V,	TA = +25°C				4	Ω
	rFLAT(ON)	VD = ±5V, 0V,
(Note 4)			TA = TMIN to TMAX				6
		IS = -10mA
Source-Off Leakage Current		V+ = 16.5V,	TA = +25°C	C, D, A	-0.25	-0.10	0.25
	IS(OFF)	V- = -16.5V,						nA
			TA = TMIN to	C, D	-5		5
(Note 7)		VD = ±15.5V,
		VS = ±15.5V	TMAX	A	-10		10
		V+ = 16.5V,	TA = +25°C	C, D, A	-0.25	-0.10	0.25
Drain-Off Leakage Current	ID(OFF)	V- = -16.5V,						nA
			TA = TMIN to	C, D	-5		5
(Note 7)		VD = ±15.5V,
		VS = ±15.5V	TMAX	A	-10		10
Drain-On Leakage Current	ID(ON)	V+ = 16.5V,	TA = +25°C	C, D, A	-0.4	-0.1	0.4
	+	V- = -16.5V,
			TA = TMIN to	C, D	-20		20	nA
(Note 7)	IS(ON)	VD = ±15.5V,
		VS = ±15.5V	TMAX	A	-40		40

2 _______________________________________________________________________________________

Improved, Quad,

SPST Analog Switches

ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)

(V+ = 15V, V- = -15V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)

	PARAMETER	SYMBOL	CONDITIONS			MIN	TYP	MAX	UNITS
							(Note 2)
	INPUT
	Input Current with Input Voltage	IINH	IN = 2.4V, all others = 0.8V			-0.500	0.005	0.500	µA
	High
	Input Current with Input Voltage	IINL	IN = 0.8V, all others = 2.4V			-0.500	0.005	0.500	µA
	Low
	SUPPLY
	Power-Supply Range					±4.5		±20.0	V
			All channels on or off,	TA	= +25°C	-1	0.0001	1
			V+ = 16.5V,
	Positive Supply Current	I+							µA
			V- = -16.5V,	TA	= TMIN to TMAX	-5		5
			VIN = 0V or 5V
			All channels on or off,	TA	= +25°C	-1	-0.0001	1
	Negative Supply Current	I-	V+ = 16.5V,						µA
			V- = -16.5V,	TA	= TMIN to TMAX	-5		5
			VIN = 0V or 5V
			All channels on or off,	TA	= +25°C	-1	0.0001	1
	Logic Supply Current	IL	V+ = 16.5V,						µA
			V- = -16.5V,	TA	= TMIN to TMAX	-5		5
			VIN = 0V or 5V
			All channels on or off,	TA	= +25°C	-1	-0.0001	1
	Ground Current	IGND	V+ = 16.5V,						µA
			V- = -16.5V,	TA	= TMIN to TMAX	-5		5
			VIN = 0V or 5V
	DYNAMIC
	Turn-On Time	tON	VD = ±10V,	TA = +25°C			110	175	ns
			Figure 2	TA	= TMIN to TMAX			220
	Turn-Off Time	tOFF	VD = ±10V,	TA = +25°C			100	145	ns
			Figure 2	TA	= TMIN to TMAX			160
			DG413 only,
	Break-Before-Make Time Delay	tD	RL = 300Ω,	TA = +25°C			25		ns
			CL = 35pF, Figure 3
			CL = 1.0nF,
	Charge Injection (Note 3)	Q	VGEN = 0V,	TA = +25°C			5	10	pC
			RGEN = 0Ω, Figure 4
			RL = 50Ω,
	Off Isolation (Note 5)	OIRR	CL = 5pF,	TA = +25°C			68		dB
			f = 1MHz, Figure 5
			RL = 50Ω,
	Crosstalk (Note 6)		CL = 5pF,	TA = +25°C			85		dB
			f = 1MHz, Figure 6
	Source-Off Capacitance	CS(OFF)	f = 1MHz, Figure 7	TA = +25°C			9		pF
	Drain-Off Capacitance	CD(OFF)	f = 1MHz, Figure 7	TA = +25°C			9		pF
	Drain-On Capacitance	CD(ON) +	f = 1MHz, Figure 8	TA	= +25°C		35		pF
		CS(ON)

DG411/DG412/DG413

_______________________________________________________________________________________ 3

DG411/DG412/DG413

Improved, Quad,

SPST Analog Switches

ELECTRICAL CHARACTERISTICS—Single Supply

(V+ = 12V, V- = 0V, VL = 5V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)

PARAMETER	SYMBOL	CONDITIONS		MIN	TYP	MAX	UNITS
					(Note 2)
SWITCH
Analog Signal Range	VANALOG	(Note 3)		0		12	V
		V+ = 10.8V,	TA = +25°C		40	80	Ω
Drain-Source On Resistance	rDS(ON)	VD = 3.8V,
			TA = TMIN to TMAX			100
		IS = -10mA
SUPPLY
Positive Supply Current	I+	All channels on or off,	TA = +25°C	-1	0.0001	1	µA
		V+ = 13.2V,
			TA = TMAX	-5		5
		VIN = 0V or 5V
		All channels on or off,	TA = +25°C	-1	0.0001	1
Negative Supply Current	I-	V+ = 13.2V,					µA
			TA = TMAX	-5		5
		VIN = 0V or 5V
		All channels on or off,	TA = +25°C	-1	0.0001	1
Logic Supply Current	IL	VL = 5.25V,					µA
			TA = TMAX	-5		5
		VIN = 0V or 5V
		All channels on or off,	TA = +25°C	-1	-0.0001	1
Ground Current	IGND	VL = 5.25V,					µA
			TA = TMAX	-5		5
		VIN = 0V or 5V
DYNAMIC
Turn-On Time	tON	VS = 8V,	TA = +25°C		175	250	ns
		Figure 2	TA = TMIN to TMAX			315
Turn-Off Time	tOFF	VS = 8V,	TA = +25°C		95	125	ns
		Figure 2	TA = TMIN to TMAX			140
		DG413 only,
Break-Before-Make Time Delay	tD	RL = 300Ω, CL = 35pF,	TA = +25°C		25		ns
		Figure 3
Charge Injection		CL = 1.0nF,
	Q	VGEN = 0V,	TA = +25°C		5	10	pC
(Note 3)		RGEN = 0V,
		Figure 4

Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet.

Note 3: Guaranteed by design.

Note 4: ∆RON = ∆RON max - ∆RON min. On-resistance match between channels and flatness are guaranteed only with bipolar-supply operation. Flatness is defined as the difference between the maximum and minimum value of on resistance as measured at the extremes of the specified analog signal range.

Note 5: Off Isolation = 20 log (VD/VS), VD = output, VS = input to off switch. See Figure 5. Note 6: Between any two switches. See Figure 6.

Note 7: Leakage parameters IS(OFF), ID(OFF), and ID(ON) are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25°C.

4 _______________________________________________________________________________________