Marantz SR5300 User Manual

0 (0)

Model SR5300 User Guide

AV Surround Receiver

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.Read Instructions – All the safety and operating instructions should be read before the product is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7.Water and Moisture – Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12.Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

AC POLARIZED PLUG

13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14.Protective Attachment Plug – The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

15.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.

16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

17.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18.Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

20.Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

21.Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e.If the product has been dropped or damaged in any way, and

22.Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23.Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

24.Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

25.Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

f.When the product exhibits a distinct change in performance – this indicates a need for service.

FIGURE 1

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

	ELECTRIC	GROUNDING CONDUCTORS
	SERVICE
		(NEC SECTION 810-21)
	EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme

NMB-003 du Canada.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Article 820-40 of the NEC, that provides guidelines for proper grounding and, in particular, specified that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE:

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment.

f g h

OUT

DIGITAL

FRONT

PRE

IN/OUT

MONI

OUT

FRONT

TAPE

MONITOR

TOR

ANTENNA

SURR.

OUT

TAPE

VCR1

OUT

DIG -4 IN

CENTER

SURR.

CDR

DSS /

CENTER

/MD

VCR2

DIG -3 IN

SURROUND

MODEL NO. SR5300

SUB

VCR1

WOOFER

GND

DIG.OUT COAX

CENTER

DSS /

SURR.

VCR2

UNSWITCHED

CENTER

120W 1A MAX

DIG -2 IN

(75Ω)

SURR.

DIG -1 IN

OUT

SWITCHED

120W 1A MAX

FRONT

DVD

6.1CH

INPUT

SURR.CENTER

CENTER

DIG.OUT OPT

REMOTE CONTROL

AUDIO

VIDEO

S-VIDEO

SPEAKER SYSTEMS

AC OUTLETS

(120V

60Hz)

POWER

l ¡0 ¡1 ¡32

¡4

¡5

¡6

¡7 ¡8

VCR1

DSS/VCR2

DVD

TUNER

TAPE

CDR/MD

Night mode

FM stereo

Encoded channel status

AUX

AMP

Speaker

Tuned

Auto tuning mode

MAIN

Attenuate

¤4

Indicator

VOL.

SLEEP

MUTE

VOL.

¤3 OSD

PEAK

Surround mode

RDS mode

¤2

PEAK

DOLBY

PRO LOGICII

STEREO

RDS

ATT

DIGITAL

VIRTUAL

DSP SOUND

TUNED

AUTO PTY

RT SL

AUTO

DTS ES

SURROUND EX

DIRECT

MEMO

PRESET

¤1

SETUP/

MENU OFF

NIGHT

DIGITAL

T.TONE

¤0 S-DIRECT

ANALOG

AUTO

DTS

DISPLAY OFF

MUTE

⁄9 NIGHT

PCM

SLEEP

CSII

EX/ES

DSP

HT-EQ

⁄8 DIMMER

M-CH ST

STEREO

6.1CH IN

Preset channel

⁄7 CLEAR

MEMO

A/D

P.SCAN

⁄0

HT-EQ

⁄6

⁄1

Display off

CHANNEL/SKIP

Input indicator

Memory

Sleep timer

⁄5 BASS

TREBLE

TUNE/SEARCH

Direct mode

Mute

⁄4

MODE

DISP./RDS

F.DIRECT

⁄2

+/A /ANT

—/B /VCR

ATT.

PTY

DISC/DECK

⁄3

SYSTEM REMOTE CONTROLLER

RC5300SR

!5 !6!7

AV SURROUND RECEIVER SR5300

SURROUND

VOLUME

PEAK

DOLBY

PRO LOGICII

STEREO

RDS

ATT

DIGITAL

VIRTUAL

DSP SOUND

TUNED

AUTO PTY

RT SL

AUTO

DTS ES

SURROUND EX

DIRECT

MEMO

PRESET

NIGHT

DIGITAL

DISPLAY OFF

ANALOG

MUTE

PCM

SLEEP

DOWN

HT-EQ

CLEAR

MEMORY

TUNING/PRESET

F/P

MODE

MUTE

6.1CH IN

A/D

S-DIRECT

SLEEP

DIMMER

STANDBY

AUX INPUT

POWER ON/STANDBY

PHONES

DVD

VCR1

DSS/VCR2

AUX

CDR/MD

TAPE

TUNER

S-VIDEO

VIDEO

L AUDIO R

iii

TABLE OF CONTENTS
INTRODUCTION ............................................	2
DESCRIPTION ...............................................	2
FEATURES ....................................................	3
FRONT PANEL FEATURES ..........................	4
REAR PANEL CONNECTIONS.....................	5
REMOTE CONTROL OPERATION ...............	6
OPERATION ..........................................................................................	6
FUNCTION AND OPERATION ..............................................................	6
PROGRAMMING THE REMOTE CONTROLLER .................................	7
OPERATION OF REMOTE CONTROL UNIT ........................................	8
CONNECTIONS .............................................	9
SPEAKER PLACEMENT .......................................................................	9
CONNECTING SPEAKERS.................................................................	10
CONNECTING AUDIO COMPONENTS ..............................................	11
CONNECTING VIDEO COMPONENTS ..............................................	12
ADVANCED CONNECTING ................................................................	13
CONNECTING REMOTE CONTROL JACKS .....................................	13
CONNECTING THE ANTENNA TERMINALS .....................................	14
SETUP .........................................................	15
ON SCREEN DISPLAY MENU SYSTEM ............................................	15
INPUT SETUP (ASSIGNABLE DIGITAL INPUT) .................................	16
SPEAKER SETUP ...............................................................................	16
PREFERENCE.....................................................................................	18
SURROUND ........................................................................................	18
PL2 (PRO LOGIC II) MUSIC PARAMETER .........................................	18
CS2 (CIRCLE SURROUND II) PARAMETER .....................................	19
6.1 CH INPUT LEVEL ..........................................................................	19
BASIC OPERATION ....................................	20
LISTENING TO THE TUNER ...............................................................	20
PLAYBACK OPERATION ....................................................................	21
TV AUTO ON/OFF FUNCTION ............................................................	21
SETTING THE SLEEP TIMER .............................................................	21
ON SCREEN DISPLAY INFOMATION ........	22
SURROUND MODE .....................................	23
TROUBLE SHOOTING ................................	27
TECHNICAL SPECIFICATIONS..................	29
DIMENSION .................................................	29

ENGLISH

ENGLISH	INTRODUCTION
ENGLISH	Please take a few minutes to read this manual thoroughly before you
	Thank you for purchasing the Marantz SR5300 DTS/Dolby Digital
	Surround receiver.
	This remarkable component has been engineered to provide you with
	many years of home theater enjoyment.
	connect and operate the SR5300.
	As there are a number of connection and configurations options, you
	are encouraged to discuss your own particular home theater setup
	with your Marantz A/V specialist dealer.

DESCRIPTION

DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems.

DTS brings you premium quality discrete multi-channel digital sound to both movies and music.

DTS is a multi-channel sound system designed to create full range digital sound reproduction.

The no compromise DTS digital process sets the standard of quality for cinema sound by delivering an exact copy

of the studio master recordings to neighborhood and home theaters.

Now, every moviegoer can hear the sound exactly as the moviemaker intended.

DTS can be enjoyed in the home for either movies or music on of

DVD’s, LD’s, and CD’s.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital

Theater Systems, Inc.

DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-

ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expanded surround signals. This format has been used professionally in movie theaters since 1999.

In addition to the 5.1 surround channels (FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the SC (Surround Center) channel for surround playback with a total of 6.1 channels. DTS-ES

Extended Surround includes two signal formats with different surround signal recording methods, as DTS-ES Discrete 6.1 and DTSES Matrix 6.1.

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of

Digital Theater Systems, Inc.

Dolby Digital identifies the use of Dolby Digital (AC-3) audio coding for such consumer formats as DVD and DTV. As with film sound, Dolby Digital can provide up to five full-range channels for left, center, and right screen channels, independent left and right surround channels, and a sixth ( ".1") channel for low-frequency effects.

Dolby Surround Pro Logic II is an improved matrix decoding technology that provides better spatiality and directionality on Dolby Surround program material; provides a convincing three-dimensional soundfield on conventional stereo music recordings; and is ideally suited to bring the surround experience to automotive sound. While conventional surround programming is fully compatible with Dolby

Surround Pro Logic II decoders, soundtracks will be able to be encoded specifically to take full advantage of Pro Logic II playback, including separate left and right surround channels. (Such material is also compatible with conventional Pro Logic decoders.)

Dolby Digital EX creates six full-bandwidth output channels from 5.1- channel sources. This is done using a matrix decoder that derives three surround channels from the two in the original recording. For best results, Dolby Digital EX should be used with movies soundtracks recorded with Dolby Digital Surround EX.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro

Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

Circle Surround II (CS-II) is a powerful and versatile multi-channel technology. CS-II is designed to enable up to 6.1 multi-channel surround sound playback from mono, stereo, CS encoded sources and other matrix encoded sources. In all cases the decoder extends it into 6 channels of surround audio and a LFE/subwoofer signal. The

CS-II decoder creates a listening environment that places the listener

“inside” music performances and dramatically improves both hi-fi audio conventional surround-encoded video material. CS-II provides composite stereo rear channels to greatly improve separation and image positioning – adding a heightened sense of realism to both audio and A/V productions.

CS-II is packed with other useful feature like dialog clarity (SRS Dialog) for movies and cinema-like bass enrichment (TruBass). CS-II can enable the dialog to become clearer and more discernable in movies and it enables the bass frequencies contained in the original programming to more closely achieve low frequencies – overcoming the low frequency limitations of the speakers by full octave.

SRS Circle Surround II, SRS Dialog, SRS TruBass, SRS and symbol are trademarks of SRS Labs, Inc.

SRS Circle Surround II, SRS Dialog and SRS TruBass technology are incorporated under license from SRS Labs, Inc.

FEATURES

BUILT-IN 6 CHANNEL POWER AMPLIFIER

90 watts to each of the six main channels ; the power amp section features an advanced, premium highstorage power supply capacitors, and fully discrete output stages housed in cast aluminum heat sinks .

192 kHZ/24-BIT D/A CONVERTER FOR ALL CHANNELS

6.1 CHANNEL PRE-AMP OUTPUTS

6.1 channel pre-amp outputs for connection to external components such as a subwoofer and external power amplifiers.

MULTI-CHANNEL 6.1CH DIRECT INPUT

Multi-channel (6.1ch)direct inputs accommodate future multichannel sound formats or an external digital decoder.

4 DIGITAL INPUTS AND 2 DIGITAL OUTPUTS

4 Digital inputs for connection to other sources, such as DVD, DSS,

CD, CD-R or MD.

2 Digital outputs for connection to CD-R or MD.

ENGLISH

DTS-ES

DTS-ES decoder built in to decode the impeccable 6.1-channel discrete digital audio from DTS-ES encoded DVD-Video discs, DVDAudio discs and CDs.

DOLBY DIGITAL EX

Dolby Digital EX decoder built in to create six full-band width output channels from the 5.1-channel digital audio of DVDs, Digital TV, HDTV, satellite broadcasts and other sources.

DOLBY PRO LOGIC II

Dolby Pro Logic II decoder provides better spatiality and directionality on Dolby Surround program material; provides a convincing three-dimensional sound field on conventional stereo music recordings.

DTS-NEO6

DTS-Neo6 decoder built in to decode 6.1-channel surround sound from any stereo material.

CIRCLE SURROUND II

CIRCLE SURROUND II decoder built in to decode 6.1-channel surround sound from any stereo or passive matrix-encoded material.

SOURCE DIRECT MODE

Source Direct mode bypasses, tone controls and bass management for purest audio quality.

30 STATION RANDOM ACCESS PRESET TUNING

High-quality AM/FM tuner with 30 station random access preset tuning.

ONSCREEN DISPLAY MENU SYSTEM

Easy to use on-screen display menu system in all video monitor output.

ENGLISH

FRONT PANEL FEATURES (SEE PAGE iii.)

q POWER switch and STANDBY indicator

When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights.

When this unit is in the standby mode, pressing one of the FUNCTION SELECTOR buttons also allows to turn the power on.

“When the STANDBY indicator lights up, the apparatus is NOT disconnected from the AC supply mains.”

w PHONES jack for stereo headphones

Conventional dynamic headphones can be plugged in here.

Notes:

•When using headphones, the surround mode is switched automatically to STEREO, the sound from the speakers is muted and the “ ” indicator is turned off.

•The surround mode returns to the previous setting as soon as the plug is removed from the jack.

e SURROUND mode selector knob

When this knob is turned, the surround mode is switched sequentially.

r VOLUME control knob

Adjusts the over all sound level. Turning the control clockwise increases the sound level.

t Function selector buttons (Audio/

Video)

These buttons are used to select the sources.

The video function selector, such as TV, DVD , VCR1, DSS/VCR2, and AUX, selects video and audio simultaneously.

Audio function sources such as CD, TAPE , CDR/MD ,and TUNER may be selected in conjunction with a Video source.

This feature (Sound Injection) combines a sound from one source with a picture from another.

Choose the video source first, and then choose a different audio source to activate this function.

y 6.1CH IN button

Press this button to select the output of an external multi channel decoder.

u A/D (Analog/Digital) SELECTOR button

This is used to select between the analog and digital inputs.

Note:

•This button is not used for an input source that is not connected to a digital input.

i S. ( Source) DIRECT button

When this button is pressed, the tone control circuit is bypassed as well as Bass Management.

Notes:

•The surround mode is automatically switched to AUTO when the source direct function is turned on.

•Additionally, Speaker Configurations are fixed automatically as follow.

Front SPKR = LARGE Center SPKR = LARGE Surround SPKR = LARGE Surround Center SPKR = YES Sub woofer = YES

•S.DIRECT is turned off when the other surround mode is selected with the SURROUND mode selector knob or the surround mode buttons of the remote controller.

o SLEEP (Sleep timer) button

Set the sleep timer function with this button .

!0DIMMER button

When this button is pressed once, the display is dimmed.

When this button is pressed twice, the display is turned off and

“DISPLAY OFF” indicator lights up.

Press this button again to turn the display ON again.

!1MUTE button

Press this button to mute the output to the speakers. Press it again to return to the previous volume level.

!2CLEAR button

Press this button to cancel the station memory setting mode or preset scan tuning.

!3MEMORY button

Press this button to enter the tuner preset memory numbers and station names.

!4TUNING / PRESET UP and DOWN buttons

During reception of AM or FM, you can scan the other frequencies or select another preset station pressing these buttons.

!5F/P (Frequency/ Preset) button

During reception of AM or FM, you can change the function of the UP/

DOWN buttons for scanning frequencies or selecting preset stations by pressing this button.

!6(FM) MODE button

Press this button to select the auto stereo mode or mono mode when the FM band is selected. The AUTO indicator lights in the auto stereo mode.

!7Infrared sensor

This window receives infrared signals from the remote control unit.

!8AUX input jacks

These auxiliary video/audio input jacks accept the connection of a camcorder, portable VCR, etc.

REAR PANEL CONNECTIONS (SEE PAGE iii.)

All connections to the rear panel should be made with the entire system powered off.

To avoid errors, it is advisable to connect one cable at a time between the various components.

a FM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxial cable, or a cable network FM source.

AM antenna and ground terminals

Connect the supplied AM loop antenna. Use the terminals marked “AM” and “GND”.

The supplied AM loop antenna will provide good AM reception in most areas.

Position the loop antenna until you hear the best reception.

s PRE OUT jacks

Jacks for Front - L/R, Center,Surround and Surround center.

Use these jacks for connection to an external power amplifier.

d SUB WOOFER output jack

Connect to the input jack(s) of the power amplifier for subwoofer channel or powered subwoofer.

f Analog AUDIO outputs for audio recording equipment

TAPE and CD-R/MD

Connect each output to the audio inputs (REC in) of your recording equipment.

g Analog AUDIO inputs

CD, TAPE, and CD-R/MD

Connect the audio outputs of your source components to the input jacks on the receiver.

h VIDEO (VIDEO/S-VIDEO) outputs

VCR1, and DSS/VCR2

Connect each output to the video input (REC in) of your video recording equipment.

j TV MONI. (VIDEO/S-VIDEO) output jacks

Connect the TV MONI jack to your TV’s video input (VIDEO IN) jack.

You can connect your video equipment with S-VIDEO jacks if possible, or the composite VIDEO jacks.

You must use the same type of connection from your video player into the receiver, and out of the receiver into your TV.

Both must be composite video or both must be S-Video. You cannot convert a signal from one type to the other.

k SPEAKER SYSTEMS terminals

FRONT Left & Right speakers output terminals

Connect to the front left & right speakers.

CENTER speaker output terminals

Connect to the center speaker.

SURROUND Left & Right speakers output terminals

Connect to the surround (rear) left & right speakers.

SURROUND Center speaker output terminals

Connect to the surround center speaker.

l 6.1 CH INPUT jacks

Connect to the outputs of DVD Audio player, SACD Multi channel player or an external multichannel decoder.

¡0DIGITAL outputs

Optical and Coaxial

Connect to the digital input of your digital recording equipment.

¡1DIGITAL inputs

Dig.1,2 (Optical) and Dig. 3, 4 (Coaxial)

Connect each input to the digital output of your source equipment. Use the SETUP MAIN MENU to assign digital input to appropriate source. (see page. 16)

Note :

•The coaxial connections are not for AC-3 RF from the LD player, If you want to decode this type of signal, an external demodulator must be used.

¡2REMOTE CONTOROL IN/OUT terminals

Connect to a Marantz component equipped with remote control (RC-

5) terminals.

¡3Analog AUDIO outputs for video recording equipment

VCR1, and DSS/VCR2

Connect each output to the audio inputs (REC in) of your video recording equipment.

¡4Analog AUDIO inputs for video source equipment

TV, DVD, VCR1, and DSS/VCR2

Connect each input to the audio outputs of your video source equipment.

¡5VIDEO inputs

TV, DVD, VCR1, and DSS/VCR2

Connect each input to the video outputs of your video source equipment.

¡6S-VIDEO inputs

TV,DVD, VCR1,and DSS/VCR2

Connect each input to the S-video outputs of your video source equipment.

¡7AC OUTLET

Connect the power cables of components such as a DVD and CD player to these outlets. Both SWITCHED and UNSWITCHED outlets are provided.

The one marked SWITCHED provides power only when the SR5300 is turned on and is useful for components which you use every time you play your system.

The one marked UNSWITCHED is always live as long as the SR5300 is plugged into a live outlet.

A component connected here may be left on permanently, or may be switched off with its own power switch.

Caution:

•In order to avoid potential turn-off thumps, anything plugged in here should be powered up BEFORE the SR5300 is turned on.

•The capacity of this AC outlet is 120W. Do not connect devices that consume electricity more than the capacity to this AC outlet. If total power consumption of connected devices exceeds the capacity, protection circuit shuts down the power supply.

¡8AC IN

Connect to AC power outlet.

SR5300 can be powered by 120V AC only.

ENGLISH

ENGLISH	REMOTE CONTROL OPERATION

	OPERATION

	The provided remote control unit is a universal remote controller. The
	POWER button x, numeric buttons . and control buttons ⁄2are used
	in common across different input source components.
	The input source controlled with the remote control unit changes when
	one of the input selector buttons c is pressed.
	• Example: To select the DVD as the input source and play the DVD
	player.
	Press the DVD button c twice within 2 seconds.
	The input selector of the SR5300 is switched to DVD and
	the remote control unit is set for control of the DVD player.
	Press the PLAY button on the remote controller .

	FUNCTION AND OPERATION
	z Transmitting indicator
	Lights up during a button is pressed and an infrared signal is sending.
	x (Main) POWER buttons
	Press to switch the power of the SR5300 ON or OFF after pressing the
	AMP button c.

cInput selector buttons/ FUNCTION SELECTOR buttons (AUDIO/VIDEO

INPUT)

Press one of these buttons once or twice to select a particular source component. For example, to set the receiver to the DVD input, press the DVD button twice within 2 seconds.

Note:

•CDR/MD button is set CDR function at initial. To switch MD

function, press and hold down CDR/MD button and press 2 button ..

•To return CDR function, press and hold down CDR/MD button and press 1 button ..

v MAIN VOLUME UP ( ) /DOWN ( ) buttons

Main volume control of the SR5300. The front, surround, center and subwoofer channel volumes controlled by these buttons simultaneously.

b MUTE button

Muting button of the SR5300. Press this button decrease the sound temporarily . Press this button again to return to the previous sound.

n MENU button

This button is used to enter the SETUP MAIN MENU.

m Cursor buttons ( , , , , OK)

Use these button when operating the SETUP MAIN MENU. See page 16.

, MENU OFF button

This button is used to exit from the SETUP MAIN MENU.

. Numeric buttons 1 to 9 (A, B, C ... Z, –) /

Surround mode buttons

Numeric buttons

These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a CD track number, etc.

The functions of these buttons are dependent on the function button selected.

Surround mode buttons (when AMP mode is selected)

These buttons are used to select the surround mode.

⁄0P.SCAN (preset scan) button (when TUNER

mode is selected)

This button is used to start preset scan when SR5300 is selected TUNER mode.

⁄10 / A/D button

0 button

This button is used to enter the number “0”

A/D button (when AMP mode is selected)

This is used to switch between the analog and digital inputs.

⁄2CONTROL buttons

These buttons are used when operating the CD player, TAPE deck, etc. The function of these buttons are dependent on the function button selected.

For the controllable functions of each input function, please refer to following table.

VCR

DVD

DSS

TUNER

TAPE

CDR

CHANNEL/SKIP

CH–

CHANNEL/SKIP

CH+

TUNE/SERCH

REWIND

TUNING–

REWIND

TUNE/SERCH

TUNING+

REC

MODE

DIRECTION

PAUSE

DISP./RDS

DISPLAY

PLAY

FRQ.

PLAY

F.DIRECT

DIRECT

+/A/ANT

VIDEO

TV/VCR

DISC +

DSS/VCR

DISC +

DECK A

–/B/VCR

VIDEO

TV/VCR

DISC +

DSS/VCR

DISC –

DECK B

STOP

PTY

⁄3ATT (attenuator) button

When the input signal is too high and the voice distorts even by throttling the SR5300 VOLUME control, turn on this function. “ATT” is indicated when this function is activated.

The input level is reduced. Attenuator is invalid for use with the output signal of “REC OUT”.

⁄4TREBLE UP ( ) /DOWN ( ) buttons

These buttons are used to adjust the tone control of high frequency sound for left, center and right speaker.

⁄5BASS UP ( ) /DOWN ( ) buttons

These buttons are used to adjust the tone control of low frequency sound for left, center right and subwoofer speaker.

⁄6MEMO button

Memory enable button for various preset functions.

+ 28 hidden pages