Marantz RC101 User Manual.pdf

2.05 Mb
Loading...

Model RC101 User Guide

Remote Controller

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du Canada.

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party: Marantz America, Inc.

100 Corporate Drive,

Mahwah, NJ, 07430, U.S.A.

TEL: 630-741-0300

Type of Product: Remote controller

Model: RC101

ENGLISH

WARRANTY

For warranty information, contact your local Marantz distributor.

RETAIN YOUR PURCHASE RECEIPT

Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.

IMPORTANT

When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate for such proof.

FOR U.K. ONLY

This undertaking is in addition to a consumer's statutory rights and does not affect those rights in any way.

FRANÇAIS

GARANTIE

Pour des informations sur la garantie, contacter le distributeur local Marantz.

CONSERVER L'ATTESTATION D'ACHAT

L'attestation d'achat est la preuve permanente d'un achat de valeur. La conserver en lieu sur pour s'y reporter aux fi ns d'obtention d'une couverture d'assurance ou dans le cadre de correspondances avec Marantz.

IMPORTANT

Pour l'obtention d'un service couvert par la garantie, il incombe au client d'établir la preuve de l'achat et d'en corroborer la date. Le reçu ou la facture constituent des preuves suffisantes.

DEUTSCH

GARANTIE

Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler.

HEBEN SIE IHRE QUITTING GUT AUF

Die Quittung dient Ihnen als bleibende Unterlage für Ihren wertvollen Einkauf Das Aufbewahren der Quittung ist wichtig, da die darin enthaltenen Angaben für Versicherungswecke oder bei Korrespondenz mit Marantz angeführt werden müssen.

WICHTIG!

BeiGarantiefragenmußderKundeeineKaufunterlage mit Kaufdatum vorlegen. Ihren Quittung oder Rechnung ist als Unterlage ausreichend.

ESPAÑOL

GARANTIA

Para obtener información acerca de la garantia póngase en contacto con su distribuidor Marantz.

GUARDE SU RECIBO DE COMPRA

Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con Marantz.

IMPORTANTE

Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó la compra. En este caso, su recibo de compra será la prueba apropiada.

ITALIANO

GARANZIA

L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno, o del periodo previsto dalla legge, a partire dalla data di acquisto comprovata da un documento attestante il nominativo del Rivenditore e la data di vendita. La garanzia sarà prestata con la sostituzione o la riparazione gratuita delle parti difettose.

Non sono coperti da garanzia difetti derivanti da uso improprio, errata installazione, manutenzione effettuata da personale non autorizzato o, comunque, da circostanze che non possano riferirsi a difetti di funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia gli interventi inerenti l’installazione e l’allacciamento agli impianti di alimentazione.

Gli apparecchi verranno riparati presso i nostri Centri di Assistenza Autorizzati. Le spese ed i rischi di trasporto sono a carico del cliente.

La casa costruttrice declina ogni responsabilità per danni diretti o indiretti provocati dalla inosservanza delle prescrizioni di installazione, uso e manutenzione dettagliate nel presente manuale o per guasti dovuti ad uso continuato a fini professionali.

CE MARKING

English

The RC101 is in conformity with the EMC directive and low-voltage directive.

Français

Le RC101 est conforme à la directive EMC et à la directive sur les basses tensions.

Deutsch

Das Modell RC101 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte.

Español

El RC101 está de acuerdo con las normas EMC y las relacionadas con baja tensión.

Italiano

Il RC101 è conforme alle direttive CEE ed a quelle per i bassi voltaggi.

English

WARNINGS

-Do not expose the equipment to rain or moisture.

-Do not remove the cover from the equipment.

-No naked flame sources, such as lighted candles, should be placed on the equipment.

-When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

-No objects filled with liquids, such as vases, shall be placed on the equipment.

Français

AVERTISSEMENTS

-Ne pas exposer l’appareil à la pluie ni à l’humidité.

-Ne pas essayer de retirer le boîtier de l’appareil.

-Ne placer aucune source de flamme nue, comme une bougie allumée, sur l'appareil.

-Pour mettre au rebut les piles usées, respecter les lois gouvernementales ou les règlements officiels concernant l’environnement qui s'appliquent à votre pays ou région.

-Aucun objet rempli de liquide, un vase par exemple, ne doit être placé sur l'appareil.

Deutsch

WARNHINWEISE

-Das Gerät nicht Regen oder Feuchtigkeit aussetzen.

-Die Abdeckung nicht vom Gerät abnehmen.

-Es dürfen keine Gegenstände mit offener Flamme, wie etwa brennende Kerzen, auf dem Gerät aufgestellt werden.

-Beachten Sie bei der Entsorgung der verbrauchten Batterienallegeltendenlokalenundüberregionalen Regelungen.

-Auf das Gerät dürfen keine mit Flüssigkeiten gefüllte Behälter, wie etwa eine Vase, gestellt werden.

Español

ADVERTENCIAS

-No exponga el equipo a la lluvia ni a la humedad.

-No extraiga la tapa del equipo.

-No deben colocarse sobre el equipo elementos con fuego, por ejemplo velas encendidas.

-Cuando se eliminen baterías usadas, deben cumplirse las reglamentaciones oficiales o las normas de protección medioambiental aplicables en su país o en su zona.

-No se deben colocar sobre el aparato recipientes que contengan líquidos, como por ejemplo jarrones.

Italiano

AVVERTENZE

-Non esporre l’apparecchio alla pioggia o all’umidità.

-Non rimuovere il coperchio dell’apparecchio.

-Non posare sull'apparecchio sorgenti di fiamme scoperte quali candele accese.

-Smaltire le pile usate in conformità alle norme governative o disposizioni ambientali vigenti nel proprio paese o zona.

-Non mettere sull'apparecchiatura alcun contenitore di liquido, come ad esempio dei vasi.

TABLE OF CONTENTS

 

INTRODUCTION ....................................

1

A NOTE ABOUT RECYCLING ..............

1

FEATURES .............................................

1

SPECIFICATIONS ..................................

1

FUNCTION AND OPERATION ..............

2

OPERATION OF REMOTE CONTROLLER ..

3

REMOTE CONTROL..........................................................

3

LOADING BATTERIES.......................................................

3

CAUTIONS ON BATTERIES..............................................

3

CONTROLLING MARANTZ

 

COMPONENTS.................................

4

CONTROLLING MARANTZ RECEIVER / AV AMPLIFIER ..

4

CONTROLLING MARANTZ SOURCE

 

COMPONENTS.................................

4

CONTROLLING A MARANTZ TV (TV) ..............................

4

CONTROLLING A MARANTZ DVD PLAYER (DVD) ........

5

CONTROLLING A MARANTZ VCR DECK (VCR1/VCR2)5

CONTROLLING A MARANTZ SATELLITE

 

BROADCASTING TUNER (DSS) ......................................

5

CONTROLLING A MARANTZ TUNER (T1/T2) .................

5

CONTROLLING A MARANTZ CD PLAYER (CD) .............

6

CONTROLLING A MARANTZ CD RECORDER (CDR)....

6

CONTROLLONG A MARANTZ TAPE DECK (TAPE)........

6

CONTROLLING A MARANTZ UNIVERSAL DOCK (AUX1/AUX2) ..

6

BASIC OPERATION...............................

7

NORMAL MODE.................................................................

7

SETTING THE BACK LIGHT .............................................

7

PRESET MODE..................................................................

7

PROGRAMMING WITH THE 4-DIGIT CODE ...................

7

SCANNING THE CODE TABLE.........................................

7

CHECKING THE CODE.....................................................

7

RESETTING THE CODE ...................................................

7

LEARN MODE....................................................................

8

LEARNING PROCEDURE.................................................

8

ERASING PROGRAMMED CODES (RETURNING TO

 

INITIAL SETTINGS) ...........................................................

8

CLONE MODE....................................................................

9

OTHER OPERATIONS...........................

9

CHANGE THE MULTI ROOM CONTROL COMMANDS

 

FOR EACH ZONE .............................................................

9

CHANGE THE CONTROL COMMANDS OF MULTI

 

SPEAKER FUNCTION FROM MULTI ROOM...................

9

INTRODUCTION

Thank you for purchasing the Marantz RC101 Learning remote controller.

This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you operate the RC101.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused.This product and the accessories packed together are the applicable product to the WEEE directive except batteries.

Please dispose of any materials in accordance with your local recycling regulations.

When discarding the unit, comply with your local rules or regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

FEATURES

Integrated Control of 12 Devices via multi room control of Marantz AV Receiver

You can control up to 12 types of devices with

Marantz AV receiver in your theater room used multi room control of Marantz AV receiver from another area.

Wide Range of Preset Codes

This remote controller is provided with remote control signals for Marantz products and DVD/TV/CD/DSS equipment by major manufacturers.

You can enable the remote control operation of your AV equipment by simply selecting the manufacturer code corresponding to your equipment.

In the factory default setting, the remote controller is preset for signals for multi room control of Marantz AV Receiver and Marantz AV equipment products.

Learning Function

If you have an infrared-based remote controller, you can use a simple operation to enable this remote controller to learn its codes.

This remote controller uses non-volatile memory so that the learned codes are retained even if the batteries are removed.

Lighting Function

This remote controller features the backlight buttons so that it can be used in a darkened location such as a home theater.

Cloning Function

This remote controller features a cloning system. This enables you to clone the programmed information from one RC101 to another, by simply pushing a series of buttons.

You can select whether to copy all programmed information or copy the information for each source.

SPECIFICATIONS

System.............Infrared programmable remote controller Learning and transmittable infrared carrier frequency band

...................................................................

 

< 80 kHz

Transmission infrared wavelength band

.............. 940 nm

Power supply ................................

Size AAA batteries x 2

Dimensions .......................

224 (H) x 50

(W) x 24 (D) mm

 

(8 7/8 (H) x 2 (W) x 1 (D) inches)

Weight....................................................

 

110 g (0.242 lbs)

Accessories .................................................

 

Batteries x 2

................................................................

 

User guide

...........................

Product warranty for USA/Canada

ENGLISH

1

ENGLISH

FUNCTION AND OPERATION

The remote controller is a universal remote controller. The SOURCE ON/OFF button and control buttons are used in common across different input source components.

The input source controlled with the remote controller changes when one of the input selector buttons is pressed.

zPOWER ON and OFF buttons

(When Zone A/B/C mode is selected)

These buttons are used to turn on or off, for the multi room control or multi speaker control of Marantz AV receiver.

(When Zone D mode is selected)

These buttons are used to turn on or off, for the Marantz AV receiver in main room.

bAMP - MUTE button

(When Zone A/B/C mode is selected)

This button is used to mute the audio for the multi room control or multi speaker control of Marantz AV receiver.

(When Zone D mode is selected)

These buttons are used to mute the audio for the Marantz AV receiver in main room.

⁄7

⁄6

⁄5

⁄4

⁄3

⁄2

z

x

c

v b n

m

,

.

⁄0

⁄1

xSOURCE ON and OFF buttons

These buttons are used to turn on or off a specific source (such as a DVD player) independently from the rest of the system.

cAMP - SOURCE /Numeric buttons

SOURCE buttons

These buttons are used to switch the source of your A/V Receiver / amplifer. Each time a source button is pressed, the remote control changes to the source which was pressed.

This remote controller can control 12 types of equipment. To change the A/V Receiver / amplifier source, press this button twice within two seconds. The signal is sent when it is pressed the second time.

(When Zone A/B/C mode is selected)

These buttons are used to select the source for the multi room/multi speaker control of Marantz AV receiver.

(When Zone D mode is selected)

These buttons are used to select the source for the Marantz AV receiver in main room.

Numeric buttons

Use these buttons only for preset setting.

vAMP - VOL +/- buttons

(When Zone A/B/C mode is selected)

These buttons are used to adjust the volume for the multi room control or multi speaker.

(When Zone D mode is selected)

These buttons are used to adjust the volume for the Marantz AV receiver in main room.

n3, 4, 1, 2 (CURSOR) / ENTER

buttons

These buttons are used when operating cursor of a source.

(When Tuner mode (T1 or T2) mode is selected)

PRESET +/ PRESET - buttons

Used to select a preset station up and down.

TUNE 3 /TUNE 4 buttons

Used to tune a frequency station up and down.

mSLEEP button

(When Zone A/B/C mode is selected)

This button is used for setting the sleep timer of multi room control mode.

(When Zone D mode is selected)

This button is used for setting the sleep timer of Marantz AV receiver in main room.

,CONTROL buttons

These buttons are used when operating PLAY, STOP, PAUSE and other commands of a source.

(When TUNER mode (T1 or T2) is selected)

P.SCAN button

Used to start preset scan.

CLEAR button

Used to stop preset scan.

.A/B/C/D buttons

(When TUNER mode (T1 or T2) is selected)

Used to select the band of tuner (AM/FM/XM/DAB).

(When the other source is selected)

Reserve key for the learning commands.

⁄0 SET button

This button is used to enter learn mode, preset mode and clone mode.

⁄1 ZONE button

This button is used to set the zone area.

⁄2 DISC+/T.MODE

(When TUNER mode (T1 or T2) is selected)

Used to select auto stereo mode or mono mode when the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode.

(When CD/DVD/CDR mode is selected)

Used to change the disc for the CD/DVD/CDR changer.

⁄3 INFO button

(When Zone A/B/C mode is selected)

When this button is pressed, the current setting for selected multi room control of AV receiver is displayed on the TV monitor.

(When Zone D mode is selected)

When this button is pressed, the current setting for AV receiver are displayed on the TV monitor.

⁄4 MENU/INPUT button

(When DVD mode is selected)

Used to menu command.

(When TV mode is selected)

Used to select the TV video input.

⁄5 CH 3/4 buttons

These buttons are used to change channels in TV mode and DSS mode.

⁄6 SEND indicator

Indicates when the remote controller is transmitting a signal.

⁄7 LEARN indicator

Indicates when the remote controller is in the LEARN mode.

2

OPERATION OF REMOTE CONTROLLER

REMOTE CONTROL

The distance between the transmitter of the remote controller and the IR SENSOR of the AV Receiver/IR Receiver should be less than 5 meters. If the remote controller is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote controller may not be possible.

Remote-controllable range

SR8001

 

 

m

 

5

.

 

Approx

 

 

60°

RC101

IR sensor

 

 

m

 

5

.

 

Approx

 

 

LOADING BATTERIES

The life of the batteries used with the remote controller is about 4 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak.

1. Remove the back cover.

2. Insert the new batteries (AAA type) with correct and polarity.

CAUTIONS ON BATTERIES

Use “AAA” type batteries in this remote controller.

We recommend that you use alkali batteries.

If the remote controller does not operate from close to the main unit, replace the batteries with new ones, even if less then a year has passed.

The included battery is only for verifying operation. Replace it with a new battery as soon as possible.

When inserting the batteries, be careful to do so in the proper direction, following the + and - marks in the remote controller’s battery compartment.

To prevent damage or battery fluid leakage:

-Do not use a new battery with an old one.

-Do not use two different types of batteries.

-Do not short-circuit, disassemble, heat or dispose of batteries in flames.

Remove the batteries when not planning to use the remote controller for a long period of time.

If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

3. Close the cover until it clicks.

RC101

Notes:

• Do not mix alkaline and manganese batteries.

• Do not mix old and new batteries.

ENGLISH

3

ENGLISH

CONTROLLING MARANTZ COMPONENTS

CONTROLLING MARANTZ RECEIVER / AV AMPLIFIER

(Refer to p. 9)

Zone A: Multi room A control

Zone B: Multi room B control

Zone C: Multi room C control

 

 

 

 

 

 

POWER ON/OFF

Turns on or off for each multi zone of

 

 

 

 

 

 

Marantz AV receiver / amplifier.

 

 

 

 

 

 

 

 

 

 

 

 

 

SOURCE

Selects a particular source component for

 

 

 

 

 

 

each multi zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

VOL +/–

Adjusts the over all sound level for each

 

 

 

 

 

 

multi zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTE

Decreases the sound temporarily.

 

 

 

 

 

 

SLEEP

Sets the sleep timer function.

 

 

 

 

 

 

INFO

Turns on or off the “On Screen Display” for

 

 

 

 

 

 

the multi zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

Zone D: Main room control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER ON/OFF

Turns on or off for main room of Marantz

 

 

 

 

 

 

AV receiver.

 

 

 

 

 

 

 

 

 

 

 

 

 

SOURCE

Selects a particular source component

 

 

 

 

 

 

for main zone.

 

 

 

 

 

 

 

 

 

 

 

 

 

VOL +/–

Adjusts the over all sound level for Main

 

 

 

 

 

 

room.

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTE

Decreases the sound temporarily.

 

 

 

 

 

 

SLEEP

Sets the sleep timer function.

 

 

 

 

 

 

INFO

Turns on or off the “On Screen Display” for

 

 

 

 

 

 

the main room.

 

 

 

 

 

 

 

CONTROLLING MARANTZ SOURCE COMPONENTS

1. Press the desired SOURCE button.

2. Press the desired operation buttons to play the selected component.

For details, refer to the component’s user guide.

It may not be possible to operate some models.

CONTROLLING A MARANTZ TV (TV)

 

 

 

 

 

 

 

SOURCE ON/OFF

Turns the TV on and off

 

 

 

 

 

 

 

MENU/INPUT

Select the TV video input

 

 

 

 

 

 

 

CH3/4

Selects TV channel up or down

 

 

 

 

 

 

 

ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3(CURSOR)

 

 

 

 

 

 

 

 

4(CURSOR)

Moves the cursor for setting in TV menu

 

 

 

 

 

 

 

2(CURSOR)

 

 

 

 

 

 

 

 

1(CURSOR)

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

;

 

 

 

 

 

 

 

§

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

DISC+/T.MODE

 

 

 

 

 

 

 

A

Reserve for learinig

 

 

 

 

 

 

 

B

Reserve for learinig

 

 

 

 

 

 

 

C

Reserve for learinig

 

 

 

 

 

 

 

D

Reserve for learinig

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

ENGLISH

CONTROLLING A MARANTZ DVD PLAYER (DVD)

(*) RC101 dose not have the PRESET code library for this key.

SOURCE ON/OFF

Turns the DVD Player on and off

MENU/INPUT

Select the DVD menu

CH3/4

ENTER

 

3(CURSOR)

Moves the cursor for setting in DVD

4(CURSOR)

menu

2(CURSOR)

 

1(CURSOR)

 

2

Play

9

Stop

;

Pause

§

Skips to forward chapter/track

Skips to previous chapter/track

6

Searchs forward

5

Searchs backward

DISC+/T.MODE

DVD changer next disc (*)

A

Reserve for learinig

B

Reserve for learinig

C

Reserve for learinig

D

Reserve for learinig

CONTROLLING A MARANTZ VCR DECK (VCR1/

VCR2)

RC101 dose not have the PRESET code library for this device.

SOURCE ON/OFF

Turns the VCR deck on and off

MENU/INPUT

CH3/4

ENTER

 

3(CURSOR)

Moves the cursor for setting in VCR

4(CURSOR)

menu

2(CURSOR)

 

1(CURSOR)

 

2

Play

9

Stop

;

Pause

§

Skips to forward track

Skips to previous track

6

Searchs forward

5

Searchs backward

DISC+/T.MODE

A

Reserve for learinig

B

Reserve for learinig

C

Reserve for learinig

D

Reserve for learinig

CONTROLLING A MARANTZ SATELLITE BROADCASTING TUNER (DSS)

(*) RC101 dose not have the PRESET code library for this key.

SOURCE ON/OFF

Turns the satellite broadcasting tuner

on and off

 

MENU/INPUT

Select the satellite tuner menu

CH3/4

Selects satellite tuner channel up or

down

 

ENTER

 

3(CURSOR)

Moves the cursor for setting in SATELLITE

4(CURSOR)

Broadcasting TUNER menu

2(CURSOR)

 

1(CURSOR)

 

2

Play (*)

9

Stop (*)

;

PAUSE (*)

§

6

Searchs forward (*)

5

Searchs backward (*)

DISC+/T.MODE

A

Reserve for learinig

B

Reserve for learinig

C

Reserve for learinig

D

Reserve for learinig

CONTROLLING A MARANTZ TUNER (T1/T2)

RC101 dose not have the PRESET code library for this device.

SOURCE ON/OFF

Turns the Tuner on and off

MENU/INPUT

CH3/4

ENTER

3(CURSOR)

Tunes a frequency station up and down

4(CURSOR)

Tunes a frequency station up and down

2(CURSOR)

Selects a preset station up and down

1(CURSOR)

Selects a preset station up and down

2

Starts preset scan

9

Stop preset scan

;

§

6

5

DISC+/T.MODE

Selects the auto stereo mode or mono

mode

 

A

Selects AM mode

B

Selects FM mode

C

Selects XM mode

D

Selects DAB mode

5

ENGLISH

CONTROLLING A MARANTZ CD PLAYER (CD)

 

 

CONTROLLING A MARANTZ CD RECORDER (CDR)

 

 

CONTROLLONG A MARANTZ TAPE DECK (TAPE)

 

• (*) RC101 dose not have the PRESET code library

 

• RC101 dose not have the PRESET code library for

 

• RC101 dose not have the PRESET code library for

for this key.

 

 

 

 

this device.

 

 

 

 

this device.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SOURCE ON/OFF

Turns the CD Player on and off

 

 

SOURCE ON/OFF

Turns the CD Recorder on and off

 

 

SOURCE ON/OFF

Turns the tape deck on and off

MENU/INPUT

 

 

MENU/INPUT

 

 

MENU/INPUT

CH3/4

 

 

CH3/4

 

 

CH3/4

ENTER

 

 

ENTER

 

 

ENTER

3(CURSOR)

 

 

3(CURSOR)

 

 

3(CURSOR)

4(CURSOR)

 

 

4(CURSOR)

 

 

4(CURSOR)

2(CURSOR)

 

 

2(CURSOR)

 

 

2(CURSOR)

1(CURSOR)

 

 

1(CURSOR)

 

 

1(CURSOR)

2

Play

 

2

Play

 

2

Play

9

Stop

 

9

Stop

 

9

Stop

;

Pause

 

;

Pause

 

;

Pause

§

Skips to forward track

 

§

Skips to forward track

 

§

Skips to forward track

Skips to previous track

 

 

Skips to previous track

 

 

Skips to previous track

6

Searchs forward

 

6

Searchs forward

 

6

Searchs forward

5

Searchs backward

 

5

Searchs backward

 

5

Searchs backward

DISC+/T.MODE

CD changer next disc (*)

 

 

DISC+/T.MODE

CDR changer next disc

 

 

DISC+/T.MODE

A

Reserve for learinig

 

 

A

Reserve for learinig

 

 

A

Reserve for learinig

B

Reserve for learinig

 

 

B

Reserve for learinig

 

 

B

Reserve for learinig

C

Reserve for learinig

 

 

C

Reserve for learinig

 

 

C

Reserve for learinig

D

Reserve for learinig

 

 

D

Reserve for learinig

 

 

D

Reserve for learinig

CONTROLLING A MARANTZ UNIVERSAL DOCK

(AUX1/AUX2)

RC101 dose not have the PRESET code library for this device.

SOURCE ON/OFF

Turns the Universal Dock on and off

MENU/INPUT

Call up the menu

CH3/4

ENTER

 

3(CURSOR)

Moves the cursor for setting in Universal

4(CURSOR)

dock menu

2(CURSOR)

 

1(CURSOR)

 

2

Play

9

Stop

;

Pause

§

Skips to forward track

Skips to previous track

6

Searchs forward

5

Searchs backward

DISC+/T.MODE

Change the userinterface mode

A

Reserve for learinig

B

Reserve for learinig

C

Reserve for learinig

D

Reserve for learinig

6

BASIC OPERATION

NORMAL MODE

(When operating Marantz AV equipment products)

This remote controller is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER 1, TUNER 2, CD, CD-R, TAPE (tape deck), AUX1 and AUX2.

Learning is not necessary for Marantz products. You can use these products without setting any codes.

1. Press the SOURCE button. For this example, press DVD.

Pressing the SOURCE button once changes the remote control to the settings for the source that was pressed.

To change the amplifier on other source, press the SOURCE button twice (double-click). The code is sent, and then the amplifi er source changes to DVD.

SETTING THE BACK LIGHT

Each time press the buttons, illuminate button 2 seconds.

To turn off back light, press and hold down the SET and 4 button until SEND indicator blinks twice. To turn on it again, press and hold down the SET and ¢ button until SEND indicator blinks twice.

Initial is back light ON.

PRESET MODE

(When operating non-Marantz AV equipment products)

This remote controller is preset with remote control codes from AV equipment by other manufacturers. The preset codes are TV, DVD, CD and DSS. Settings can be made in one of two ways.

When the preset codes are set, the following codes are contained in the source button of the remote controller.

See the attached manufacturer number list for the preset manufacturers, devices, preset numbers, and other settings.

Remote control

Corresponding preset

Device name

source name

code

 

TV

TV

Television

DVD

DVD

DVD player

CD

CD

CD player

DSS

SATELLITE

Satellite broadcasting

 

 

tuner equipment

Importants:

Some codes may be not match your equipment.

In this case, you can use LEARN mode to store these codes.

The preset codes do not cover full functions.

If you need extra function, use LEARN mode to store extra function.

When the batteries are getting weak, the preset procedure is not successful.

PROGRAMMING WITH THE 4-DIGIT CODE

1.

1.

2.

1. Press and hold down the SOURCE button (ex TV) for the appliance which should be controlled and press SET button until the SEND indicator blinks twice.Then back light flushes.

2. Press the 4-digit code by numeric keys for appliance (code table at the end of this book) When the procedure is successful, the SEND indicator will blink twice.

Note:

If the indicator did not blink twice, then repeat steps 1 through 2 and try entering the same code again.

SCANNING THE CODE TABLE

3.

5.

 

2.

3. 2.

1. Switch on the appliance which should be controlled.

2. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice.Then back light flushes.

3. Aim the remote controller at the appliance and alternately press the CH+ and SOURCE ON buttons slowly.

4. Stop when the appliance turns off.

5. Press ENTER button once to lock in the code.

CHECKING THE CODE

2. 4.

3.

1. 1.

1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice then back light flushes.

2. Press the INFO button.

The SEND indicator will blink twice.

3. To view the code for first digit, press 1 once.

Count the SEND indicator blinks (e.g. 3 blinks = 3) and write down the number.

Note:

If a code digit is “0”, the SEND indicator will not blink.

4. Repeat step 3 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.

RESETTING THE CODE

2.

1. 1. 2.

1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice.

Then back light flushes.

2. Press the below codes to reset.

TV : 1000

DVD : 2000

CD : 3000

DSS : 4000

The indicator will blink twice.

Note:

After this procedure, the selected SOURCE button is set initial code.

ENGLISH

7

ENGLISH

 

LEARN MODE

 

 

This remote controller is capable of learning and

 

 

 

 

storing codes used by other remote controls that you

 

 

already own.

 

 

For codes which are not learned, the remote

 

 

controller will transmit either the Marantz preset

 

 

 

codes from the initial settings, or remote codes from

 

 

another manufacturer’s AV equipment which is set

 

 

by the customer.

 

 

The receiver sensor for the remote control signals is

 

 

located at the top of the remote controller.

 

 

Notes:

This remote controller is capable to learn around 60 codes.

When the batteries are getting weak , the learing procedure is not successful.

LEARNING PROCEDURE

1. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a distance of about 2 inches (0.05 m).

inches 2

2. Press and hold down the SET and MENU/ INPUT buttons until LEARN indicator blinks.

4. Select the button to be learned.

• LEARN indicator lights up.

When the following key learned

SOURCE buttons

The learning function is unavailable for all SOURCE buttons in any mode.

POWER ON button

POWER OFF button

VOL +/- button

MUTE button

INFO button

SLEEP button

The above keys are common use in each device mode. It can be learned in TV mode.

5. Press and hold the button of the original remote controller to learn until the SEND indicator blinks twice.

When the SEND indicator blinks once, repeat this step.

When the memory of the RC101 is full, the LEARN and SEND indicators blink once. If you want to learn the code, you should erase other learned button.

6.Repeat steps 4 and 5 to learn other buttons in same SOURCE.

7.Repeat steps 3 to 6 to learn other SOURCE.

8.When you have finished programming the remote controller, press the SET button, then LEARN indicator stops blinking and exits from the LEARN mode.

ERASING PROGRAMMED CODES (RETURNING TO

INITIAL SETTINGS)

Codes can be erased in three ways: by buttons, sources, and by all memory contents.

Erasing the code by buttons

1. Press and hold down the SET and MENU/ INPUT buttons until LEARN indicator blinks.

2. Select the SOURCE button to select the button to be erased.

3. Press and hold down the SLEEP button and press the learned button twice to be erased.

SEND indicator blinks twice and the mode returns to LEARN mode.

4. To return the NORMAL mode, press the SET button.

Erasing the code by SOURCE

1. Press and hold down the SET and MENU/ INPUT buttons until LEARN indicator blinks.

3. Press ENTER button to continue erasing.

The SEND indicator blinks twice and the mode returns to LEARN mode.

To cancel the erasing operation, do not press ENTER button and simply touch any other button.

4. To return the NORMAL mode, press the SET button.

Erasing the all SOURCES

1. Press and hold down the SET and MENU/ INPUT buttons until LEARN indicator blinks.

2. Press and hold down the SLEEP button and press POWER ON and POWER OFF button.

• LEARN indicator lights.

3. Press ENTER button to continue erasing.

The SEND indicator blinks twice and the mode returns to LEARN mode.

To cancel the erasing operation, do not press ENTER button and simply touch any other button.

3. Select the SOURCE button to select the

SOURCE.

Notes:

When the SEND indicator blinks once again, the transmitting code is unavailable for RC101, or the transmitting signal is intercepted by noise.

If no buttons are pressed for approximately 1 minutes while in the LEARN mode, the remote controller automatically exits from the LEARN mode.

8

2. Press and hold down the SLEEP button and press the learned SOURCE button twice to be erased.

• LEARN indicator lights.

4. To return the NORMAL mode, press the SET button.

Note:

Erasing codes will return to the factory preset code, or there will leave empty if the button has no factory preset code.

CLONE MODE

Creating copies using clone mode

All of the codes programmed to the RC101 remote controller can be copied to another RC101 using a few simple operations.

The remote controller can copy the entire contents.

When copying the entire contents, all programmed codes are copied.

Note:

The clone function can only be used for copying when using the same model (RC101) for both the transmitting and receiving remote controller.

Copying entire contents

1. Place the receiver sensor of the receiving remote controller (top) so that it is facing the transmitter of the transmitting remote controller (top) at a distance of about 2 inches (5 cm).

inches 2

2. Press SET button and PLAY button of the transmitting remote controller until the SEND indicator blinks twice.

Then backlight flushes

The transmitting side is now ready.

3. Press SET button and STOP button of the receiving remote controller until the LEARN indicator blinks twice.

Then backlight flushes.

The receiving side is now ready.

4. Press the ENTER cursor button on the receiving remote controller.

Then back lights tune off.

5. Press the ENTER cursor button on the transmitting remote controller.

Then backlights tune off.

6. When copying is started, the SEND indicator of transmitting remote controller and the LEARN indicator of receiving remote controller start to blink.

When the copying operation is completed, the back lights of transmitting remote controller and receiving remote controller are turned on.

Do not touch either of the remote controls during the copying operation. Doing so could cause copying to fail.

If the copying fails in the middle of the copying process, back light of receiving remote are flush. Press the SET button to return the normal mode. Check and perform steps 1 to 5 again.

Copying takes about 30 seconds to complete when the transmitting remote controller has been programmed to 100% capacity.

7. Once copying is completed, press the SET button on both remote controls.

OTHER OPERATIONS

CHANGE THE MULTI ROOM CONTROL COMMANDS

FOR EACH ZONE

(When operating Marantz AV Receiver by Multi Zone connected)

Zone A: Multi room A control (Default)

Zone B: Multi room B control

Zone C: Multi room C control

Zone D: Main room control

Change the control commands for each zone.

2. 1.

1. Press SET button and ZONE button until the SEND indicator blinks twice.

Then backlight flushes.

2. Press each zone button(A/B/C/D button)

When the procedure is successful, the SEND indicator will blink twice.

These buttons change a special code of each zone.

POWER ON/OFF

SOURCE

VOL +/–

MUTE

INFOSLEEP

Tuner mode operation remote code (Refer to p.5)

CHANGE THE CONTROL COMMANDS OF MULTI

ENGLISH

SPEAKER FUNCTION FROM MULTI ROOM.

 

1.

3.

 

2. 1.

1. Press SET button and POWER ON button until the SEND indicator blinks twice.

Then backlight flushes.

2. Press the 1-digit code by numeric keys.

Multi room mode: 1 (Default)

Multi speaker mode: 2

Note

In case of Zone D, only control for main room is possible.

3. Press ENTER button once to lock in the code.

When the procedure is successful, the SEND indicator will blink twice.

These buttons change a special code of multi room mode or multi speaker mode.

Note

The control commands can be set independently in ZONE A/B/C.

POWER ON/OFF

VOL +/–

MUTE

9

SETUP CODES

TV

 

 

 

Acer ..........................................................

 

1141

Admiral .................................

1002, 1009, 1089

Aiko ..........................................................

 

1059

Aiwa................................................

1117, 1118

Akai ..........................................................

 

1001

Amtron......................................................

 

1023

Anam........................................................

 

1113

Anam National......................

1023, 1069, 1092

AOC...........................

1003, 1024, 1049, 1127

Audiovox...................................................

 

1023

Bell & Howell ..................................

1009, 1025

Benq...............................................

1104, 1142

Broksonic ..................

1003, 1097, 1098, 1113

Celebrity ...................................................

 

1001

Citizen ..................................

1003, 1013, 1023

 

 

1026, 1059, 1063

Colortyme.......................................

1003, 1043

Contec......................................................

 

1113

Contec/Cony ........................

1023, 1045, 1047

Craig..........................

1020, 1022, 1023, 1113

Crown .............................................

1023, 1067

Curtis Mathes.......................

1003, 1013, 1025

 

 

1026, 1062, 1103, 1110

Daewoo .....................

1003, 1013, 1024, 1035

 

 

1036, 1059, 1084, 1101

Daytron.................................

1003, 1013, 1016

Dimensia ........................................

1103, 1110

Dumont.................................

1003, 1010, 1153

Electroband ..............................................

 

1001

Electrohome ..............

1001, 1003, 1069, 1133

Emerson...............................

1003, 1013, 1015

 

 

1020, 1021, 1022, 1023

 

 

1025, 1038, 1044, 1045

 

 

1048, 1055, 1061, 1094

 

 

1096, 1099, 1101, 1113

Envision....................................................

 

1003

Fisher ........................

1025, 1051, 1091, 1160

Fujitsu........................

1038, 1124, 1125, 1155

Funai ....................................

1023, 1038, 1113

Gateway ...................................................

 

1150

GE ............................

1003, 1018, 1022,

1046

 

 

1054, 1069, 1085, 1103

 

 

1110, 1113, 1133, 1136, 1153

Goldstar................................

1003, 1013, 1024

 

 

1030, 1045, 1080

 

 

1100, 1112, 1154

Hallmark ...................................................

 

1003

Hisense ....................................................

 

1116

Hitachi .......................

 

1003, 1012, 1031, 1032

 

 

1037, 1041, 1045, 1047

 

 

1065, 1068, 1082, 1088

 

1094, 1139, 1140, 1145, 1159

Infinity .......................................................

 

1067

Janeil ........................................................

 

1134

JBL ...........................................................

 

1067

JC Penney............................

 

1003, 1013, 1018

 

 

1019, 1024, 1026

 

 

1046, 1047, 1054

 

 

1063, 1083, 1085

 

 

1100, 1103, 1110

 

 

1112, 1133, 1154

Jensen......................................................

 

1003

JVC.......................................

 

1028, 1029, 1045

 

 

1047, 1050, 1060, 1065

Kawasho.........................................

 

1001, 1003

Kenwood ..................................................

 

1003

Kloss Novabeam .......

1023, 1056, 1057, 1134

KTV ......................................

 

1013, 1023, 1033

 

 

1034, 1073, 1099, 1113

LG...................................................

 

1024, 1030

M.Wards ...............................

 

1002, 1009, 1038

Magnavox.............................

 

1003, 1052, 1053

 

 

1056, 1057, 1063

 

 

1067, 1081, 1106

Marantz .....................

 

1003, 1031, 1067, 1122

Mitsubishi .............................

 

1003, 1024, 1051

 

 

1115, 1122, 1133

Motorola .........................................

 

1014, 1069

NEC.................

1003, 1012, 1024, 1043, 1069

NET-TV...........................................

 

1137, 1150

Orion...............................................

 

1020, 1096

Panasonic........

1017, 1067, 1069, 1095, 1111

Philips........................

 

1003, 1011, 1045, 1052

 

 

1054, 1056, 1057, 1058

 

 

1063, 1067, 1069, 1106

Pioneer.................................

 

1003, 1018, 1037

 

 

1070, 1071, 1094

 

 

1145, 1147, 1149

Plasmsync................................................

 

1135

Portland.....................

 

1003, 1013, 1024, 1059

Price Club.................................................

 

1026

Prism ........................................................

 

1018

Proscan .....................

 

1004, 1005, 1006, 1007

 

 

1008, 1085, 1103, 1110

Proton.............................................

 

1003, 1045

Quasar ............

1010, 1069, 1073, 1111, 1153

Radio Shack.........................

1003, 1013, 1015

Wards ...................................

 

1003, 1009, 1015

 

1023, 1024, 1025, 1045

 

 

 

1024, 1038, 1044, 1046

 

1100, 1103, 1110, 1113

 

 

 

1052, 1054, 1056, 1057

RCA......................................

1003, 1004, 1005

 

 

 

1067, 1086, 1103, 1110

 

1006, 1007, 1008

White Westinghouse

......................1001, 1101

 

1014, 1024, 1049, 1069

Yamaha ..........................................

 

1003, 1024

 

1075, 1079, 1085, 1087

Zenith ...................................

 

1003, 1009, 1010

 

1088, 1093, 1094, 1101

 

 

 

1132, 1144, 1153

 

1103, 1110, 1113, 1153

CD

 

 

 

Realistic.....................

1013, 1015, 1023, 1025

 

 

 

AIWA

 

3001, 3002, 3003

 

1045, 1100, 1103, 1110

 

 

AKAI

 

3004, 3005, 3006

Runco

1010, 1153

 

AUDIO

 

3007

Sampo

1150

 

AUDIO LABS

 

3008

Samsung

1003, 1013, 1024, 1026

 

CALIFORNIA

 

3008

 

1040, 1045, 1062, 1078

 

 

CARVER

 

3010, 3011, 3009

 

1083, 1090, 1100, 11051114

 

 

CASIO

 

3012, 3020

 

1120, 1121, 1146, 1148, 1157

 

 

CURTIS

 

3020, 3012

Sansui

1119

 

DENON

 

3013

Sanyo

1003, 1025, 1051, 1072

 

EMERSON

 

3014

 

1077, 1091, 1156, 1157, 1158

 

 

FISHER

3011, 3015, 3016, 3017, 3018

Sharp

1003, 1013, 1014

GE

 

3019

 

1015, 1045, 1055, 1064

 

 

GENEXXA

 

3014, 3021, 3020

 

1066, 1076, 1089, 1123

 

 

HARMON

 

3022, 3023, 3051

Signature

1009

 

HITACHI

 

3020

Sony

1001, 1102, 1108

 

INKEL

 

3024

Soundesign

1003, 1023, 1038, 1063, 1113

 

JC PENNEY

 

3012, 3020, 3025

Starlite

1023

 

JVC

 

3026, 3027

Supre-Macy

1134

 

KARDON

 

3022, 3051, 3023

Sylvania

1003, 1039, 1042

 

KENWOOD

 

3028, 3029, 3030, 3031

 

1052, 1053, 1056, 1057

 

 

 

 

 

3032, 3033

 

1063, 1067, 1089, 1151

 

 

 

 

KRELL

 

3010

Symphonic

1023, 1039, 1044

 

LUXMAN

 

3035, 3036, 3037, 3038

Tandy

1014

 

LX I

 

3012, 3020, 3014

Tatung

1069

 

MAGNAVOX

 

3010, 3039, 3040

Technics

1018

 

MARANTZ

 

3010, 3041, 3042, 3043

Techwood

1003, 1018

 

MATHES

 

3012, 3020

Teknika

1003, 1009, 1013, 1023

 

MCS

 

3012, 3020

 

1024, 1026, 1038, 1045

 

 

MGA

 

3023

 

1047, 1059, 1063, 1111, 1113

 

 

MISSION

 

3010

Telecaption

1074

 

MITSUBISHI

 

3023, 3044

Toshiba

1003, 1019, 1025

 

NAD

 

3034, 3045

 

1026, 1042, 1074, 1098

 

 

NAKAMICHI

 

3046, 3047, 3048

 

1107, 1111, 1135, 1136

 

 

NEC MCS

 

3025

Totevision

1013

 

NIKKO

 

3007, 3016

Universal

1046, 1054

 

ONKYO

 

3049, 3050, 3051, 3052

Video Concepts

1113

 

 

 

 

3055, 3098

Viewsonic

1006, 1022, 1109

 

 

 

OPTIMUS

3011, 3014, 3020, 3028, 3053

 

1128, 1129, 1130, 1131

 

 

 

3054, 3056, 3057, 3058, 3059

 

1138, 1143, 1145, 1150

 

 

 

PANASONIC

 

3008, 3060, 3061

 

 

 

 

 

PHILIPS ....................

 

3009, 3010, 3010, 3040

i

PIONEER ........

3020, 3021, 3062, 3063, 3064

QUASAR

..................................................

 

3008

RCA.................

 

3011, 3014, 3065, 3066, 3067

 

 

 

3068, 3069

REALISTIC................

 

3011, 3014, 3020, 3042

 

 

 

3054, 3057

ROTEL .....................................................

 

 

3010

RS ORIGINAL..........................................

 

3070

SAE ................................................

 

 

3010, 3083

SAMSUNG...............................................

 

3071

SANSUI.....................

 

 

3014, 3068, 3072, 3073

SANYO............

 

3011, 3018, 3074, 3075, 3076

SCOTT .....................................................

 

 

3014

SEARS ............

 

3012, 3014, 3020, 3028, 3042

SHARP.................................

 

 

3028, 3042, 3077

SHERWOOD...

3042, 3056, 3070, 3078, 3024

SHURE.....................................................

 

 

3025

SONY ....

3039, 3079, 3080, 3081, 3082, 3097

SYLVANIA ................................................

 

3010

SYMPHONIC ...........................................

 

3083

TEAC...............

 

3016, 3042, 3057, 3083, 3084

 

 

 

3085, 3086

TECHNICA......

3007, 3008, 3061, 3087, 3088

THETA DIGITAL

.......................................3040

TOSHIBA..................................................

 

3045

VICTOR....................................................

 

 

3026

YAMAHA

.........

3007, 3089, 3090, 3091, 3092

ZENITH ...........

 

3016, 3093, 3094, 3095, 3096

DVD

 

 

 

Aiwa................................................

 

 

2036, 2037

Apex ......

2012, 2017, 2018, 2019, 2021, 2034

BOSE .............................................

 

 

2038, 2039

Denon.............................................

 

 

2047, 2048

Funai ........................................................

 

 

2049

GE .............................

 

 

2009, 2020, 2029, 2033

Harman Kardon........................................

2061

Hitachi ..................................

 

 

2008, 2012, 2031

JVC.......................................

 

 

2006, 2010, 2040

 

 

 

2041, 2042, 2043

Kenwood

........................................

 

2053, 2054

Koss..........................................................

 

 

2058

Magnavox..................

 

2007, 2011, 2023, 2025

Marantz ....................................................

 

 

2025

Mitsubishi .......................................

 

2011, 2015

Onkyo .......................................................

 

 

2062

Oritron ............................................

 

 

2009, 2030

Panasonic..................

 

2003, 2015, 2016, 2055

Philips...................................

 

 

2007, 2011, 2058

Pioneer.................................

 

 

2002, 2014, 2056

Proscan ................................

 

 

2009, 2020, 2032

RCA.................

 

2005, 2009, 2020, 2035, 2057

Sampo......................................................

 

 

2041

Samsung

.........

2008, 2012, 2022, 2024, 2027

Sanyo .............................................

 

 

2050, 2052

Sharp..............................................

 

 

2044, 2045

Sherwood .................................................

 

2051

Sony .....................................

 

 

2001, 2013, 2059

Toshiba......................

 

 

2004, 2008, 2026, 2028

Yamaha ..........................................

 

 

2046, 2060

Zenith .......................................................

 

 

2010

DSS

 

 

 

Alphastar

..................................................

 

4027

BSB ..........................................................

 

 

4021

Chaparral .................................................

 

4039

DIRECTV .......................................

 

4001, 4016

DISH Network ..........................................

 

4030

Drake........................................................

 

 

4026

Echostar ..........

 

4007, 4017, 4018, 4019, 4020

Express Vu ...............................................

 

4017

Fujitsu.......................................................

 

 

4025

GE ........................................

 

 

4002, 4008, 4009

General Instruments ......................

4036, 4037

Hitachi ............................................

 

 

4001, 4015

Hughes...........................................

 

 

4001, 4016

Janeil ........................................................

4025

JVC...........................................................

4017

Mitsubishi .................................................

4001

Panasonic.......................................

4004, 4010

Philips.............................................

4031, 4035

Proscan .....................

4002, 4008, 4009, 4011

Radio Shack...................................

4036, 4037

RCA...........................

4002, 4008, 4009, 4029

Realistic....................................................

4040

Rural Cable ..............................................

4036

Samsung ........................................

4022, 4027

Sony .....................................

4003, 4012, 4014

Star Choice ..............................................

4032

Star Trak ...................................................

4024

STS ..........................................................

4038

SuperDish ................................................

4028

Toshiba...........................................

4001, 4034

Uniden..................................

4005, 4006, 4013

Video Pall .................................................

4025

Zenith .............................................

4025, 4033

ii

www.marantz.com

You can find your nearest authorized distributor or dealer on our website.

is a registered trademark.

02/2007 00M31CW851030 mzh-d