Marantz Dv4003, 541110153029M User Manual

1.51 Mb
Loading...

 

 

 

 

 

 

 

 

 

 

ESPAÑOL

FRANÇAIS

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD Player

DV4003

ENGLISH

Before

CONGRATULATIONS ON YOUR PURCHASE OF THIS

FINE MARANTZ PRODUCT.

 

 

MARANTZ is on the leading edge of DVD research for

You

consumer products and this unit incorporates the latest

technological developments.

Start

Thank you for your support.

 

We are sure you will be fully satisfied with the DVD player.

 

 

Connecting

Please read through these operating instructions so you

will know how to operate your model properly. After you

 

 

have finished reading the instructions, put them away in

 

a safe place for future reference.

 

 

Up

Copy protection

Many DVD discs are encoded with copy protection. Because

 

 

of this, you should only connect your DVD player directly to

Control

your TV, not to a VCR. Connecting to a VCR results in a dis-

torted picture from copy-protected DVD discs.

 

 

 

 

 

 

 

 

 

 

 

&

This product incorporates copyright protection technol-

ogy that is protected by methods claims of certain U.S.

Displays

patents and other intellectual property rights owned by

 

 

Macrovision Corporation and other rights owners.

 

Use of this copyright protection technology must be

 

authorized by Macrovision Corporation, and is intended

 

for home and other limited viewing uses only unless oth-

Getting

erwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

 

 

 

 

 

 

 

 

 

 

 

Started

Operating Environment

+5°C to +35°C (+41°F to +95°F); less than 85%RH

 

Operating environment temperature and humidity:

 

(cooling vents not blocked)

 

Do not install in the following locations

 

÷ Location exposed to direct sunlight or strong artificial

DiscsPlaying

light

÷ Location exposed to high humidity, or poorly ventilated

 

 

location

DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup

Changes or modifications not expressly approved by the

Menu

NOTE:

party responsible for compliance could void the user’s au-

 

 

thority to operate the equipment.

Additional Information

 

 

 

 

 

 

 

 

 

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION :

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER COVERSHIELD)

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

2

AC Polarized
Plug

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer´s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety

purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider

than the other.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:

Install all batteries correctly, + and as marked on the unit.

Do not mix batteries (old and new or carbon and alkaline, etc.).

Remove batteries when the unit is not used for a long time.

16.Apparatus shall not be exposed to dripping or splashing.

17.Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).

18.This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations.

For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance : www.eiae.org.

EL 6475-E005: 04/01

Information

Additional DVD Setup Menu Playing Discs Getting Started Control & Displays Connecting Up Before You Start

3

ENGLISH

Before

Additional Safety Information!

• This product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been

You

adhered to.

• Apparatus shall not be exposed to dripping or splashing

Start

and that no objects filled with liquids, such as vases,

 

 

shall be placed on the apparatus.

 

• When the switch is in the OFF position, the apparatus

Connecting

isn’t completely switched-off from the MAINS.

able protection against harmful interference in a residential

 

FCC NOTE (for U. S. A only):

 

This equipment has been tested and found to comply with

 

the limits for a Class B digital device, pursuant to Part 15 of

 

the FCC rules. These limits are designed to provide reason-

Up

installation. This equipment generates, uses and can radi-

ate radio frequency energy and, if not installed and used

 

 

in accordance with the instructions, may cause harmful

Control

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures.

• Reorient or relocate the receiving antenna.

&

• Increase the separation between the equipment and re-

Displays

• Consult the dealer or an experienced radio/TV technician

 

ceiver.

 

• Connect this equipment into an outlet on a circuit differ-

 

ent from that to which the receiver is connected.

Getting

for help.

NOTE: Changes or modifications may cause

 

 

this unit to fail to comply with Part 15 of the

 

FCC Rules and may void the user’s authority to

Started

operate the equipment.

This Class B digital apparatus complies with

 

 

Canadian ICES-003.

 

Cet appareil numérique de la Classe B est

Playing

conforme á la norme NMB-003 du Canada.

This product satisfies FCC regulations when shielded cables

Discs

and connectors are used to connect the unit to other equip-

ment. To prevent electromagnetic interference with electric

 

 

appliances, such as radios and televisions, use shielded

 

cables and connectors for connections.

DVD

CE marking (for Europe only)

 

 

This product is in conformity with the

Setup

 

 

 

 

EMC directive and low-voltage directive.

 

 

WARNINGS

Menu

 

 

- Do not expose the equipment to rain or

moisture.

 

 

- Do not remove the cover from the equipment.

Additional Information

- Do not insert anything into the equipment

through the ventilation holes.

- Do not handle the mains lead with wet hands.

- Do not cover the ventilation with any items

such as tablecloths, newspapers, curtains, etc.

 

 

 

 

- No naked flame sources, such as lighted

 

candles, should be placed on the equipment.

4

-When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

-Do not place anything about 0.1 meter above the top panel.

-Make a space of about 0.1 meter around the unit.

-No objects filled with liquids, such as vases, shall be placed on the apparatus.

-When the switch is in the OFF position, the equipment is not completely switched off from MAINS.

-The equipment shall be installed near the power supply so that the power supply is easily accessible.

WARRANTY

For warranty information, contact your local Marantz distributor.

RETAIN YOUR PURCHASE RECEIPT

Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes of when corresponding with Marantz.

IMPORTANT

When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate for such proof.

FOR U.K. ONLY

This undertaking is in addition to a consumer’s statutory rights and does not affect those rights in any way.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

Do not use benzene, thinner, or other solvents for cleaning.

Wipe the cabinet with a soft cloth.

A NOTE ABOUT RECYCLING

This product’s packaging mater ials are recyclable and can be reused. This product and the accessories packed together are the applicable product to the WEEE directive except batteries.

Please dispose of any materials in accordance with your local recycling regulations.

When discarding the unit, comply with your local rules or regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

 

Table Of Contents

 

1

Before You Start

 

 

Features ...............................................................................

6

 

What’s in the box ..............................................................

7

 

Putting the batteries in the remote control.................

7

 

Using the remote control ................................................

7

 

DVD-Video regions ...........................................................

7

 

Discs compatible with this player..................................

8

 

General Information for MP3/WMA/JPEG/DivX .......

9

 

MP3 compatibility information......................................

9

 

WMA compatibility information.....................................

9

 

JPEG compatibility information......................................

9

 

DivX compatibility information......................................

9

2

Connecting Up

 

 

Easy setup.........................................................................

10

 

Home theater video connections.................................

11

 

Home theater audio connections................................

12

3

Controls & Displays

 

 

Front panel .......................................................................

13

 

Display...............................................................................

13

 

Remote control................................................................

14

4

Getting Started

 

 

Playing discs .....................................................................

15

 

Basic playback controls .................................................

16

 

Resuming playback from the last stopped point......

16

 

Navigating DVD disc menus..........................................

17

 

Navigating Video CD PBC menus................................

17

5

Playing Discs

 

 

Introduction .....................................................................

18

 

Fast Forward/Fast Reversed...........................................

18

 

Still Frame/Slow Play/Frame Advance

 

 

Playback ............................................................................

19

 

Using the Repeat Play....................................................

20

 

Looping a section of a disc...........................................

21

 

Using the Random (SHUFFLE) Play ............................

21

 

Switching Camera Angles ..............................................

22

 

Switching the Subtitle Language .................................

22

 

Switching the Audio Language ..................................

23

 

Switching the Audio channel........................................

23

 

Using the Zoom Function .............................................

23

 

Preview function ..............................................................

24

 

Play back Information.....................................................

25

 

Playing a MP3/DivX/JPEG/

 

 

Windows MediaAudio disc........................................

27

 

Playing a JPEG image file (slide show)........................

28

 

Playing MP3/WMA music and JPEG

 

 

pictures simultaneously .................................................

29

 

Playing a DivX disc..........................................................

30

 

USB operation .................................................................

31

 

Using the Setup Menu ...................................................

32

ENGLISH

6

DVD Setup Menu

 

 

Setting up the GENERAL SETUP page .......................

34

 

Setting up the AUDIO SETUP page............................

37

 

Setting up the VIDEO SETUP page.............................

39

 

Setting up the PREFERENCE page ..............................

44

7

Additional Information

 

 

Language Codes..............................................................

47

 

Handling discs..................................................................

48

 

Storing discs.....................................................................

48

 

Discs to avoid...................................................................

48

 

Cleaning the pickup lens ...............................................

48

 

Problems with condensation ........................................

48

 

Hints on installation .......................................................

49

 

Moving the player ...........................................................

49

 

Precautions on using the power cord.........................

49

 

Troubleshooting ..............................................................

50

 

Frequently Asked Question (USB)..............................

52

 

Specifications...................................................................

53

Information

Additional DVD Setup Menu Playing Discs Getting Started Control & Displays Connecting Up Before You Start

5

1

You Before

Start

Discs Playing Started Getting Displays & Control Up Connecting

Setup DVD

Menu

AdditionalInformation

ENGLISH

Before You Start

Features

USB Operation

You can play or view the data files (JPEG, MP3, WMA, or DivX®) in the USB flash drive.

CD Ripping

This feature allows you to convert audio tracks from an audio CD into MP3 format. The created MP3 files are saved in your USB device.

An HDCP-compatible HDMI*1 terminal is provided to ensure the very highest picture and digital sound quality by fully digital transmission.

This unit is equipped with an HDCPcompatible digital image output terminal (HDMI) to provide copyright protection.

Direct digital transmission without analog conversion of DVD image data makes it possible to enjoy real-life images without any image deterioration resulting from AD/DA conversion. The unit has also been designed to make it possible to handle the transmission of both digital video and digital audio with a single connector.

MP3 and WMA*3 compatibility

This player is compatible with CD-R, CDRW and CD-ROM discs that contain MP3 and WMA audio tracks (see pages 27, 29).

JPEG compatibility

This player is compatible with CD-R, CDRW and CD-ROM discs that contain JPEG data (see pages 27, 28, 29).

*1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

*2 “DivX”, and “DivX Ultra” Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

*3 Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

High quality 12-bit/108 MHz video D/A converter

The unit uses a video D/A converter that performs D/A conversion of all video signals in 12 bits and can perform 4x oversampling to let you enjoy beautiful video possible with DVD.

“DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.

High quality 24-bit/192 kHz DAC

The high specification 24-bit/192 kHz DAC delivers dynamic, smooth and expansive analog sound from CDs and DVDs.

DivX *2

You can enjoy DivX® files which are recorded on DVD±R/RW or CD-R/RW.

Official DviX® Ultra Certified product

Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX® Media Format

This player supports Quarter Pixel.

This player does not support GMC.

6

Before You Start

What’s in the box

Thank you for buying this MARANTZ product. Please confirm that the following accessories are in the box when you open it.

Remote control

AAA/R03 dry cell batteries x2

Audio/Video cable (yellow/red/white)

System control cable (USA only)

Power cable

User Guide (this manual)

Warranty card (USA only)

Putting the batteries in the remote control

1 Open the battery compartment cover on the back of the remote control.

2 Insert two AAA/R03 batteries into the battery compartment following the indications (ª, ·) inside the compartment.

3 Close the cover.

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

Don’t mix new and old batteries together.

Don’t use different kinds of battery together. Although they may look similar, different batteries may have different voltages.

Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

Remove batteries from equipment that isn’t going to be used for a month or more.

When disposing of used batteries, please comply with governmental regulations or environmental bylaws that apply in your country or area.

 

ENGLISH

 

 

 

 

1

Using the remote control

Start

Keep in mind the following when using the

 

remote control:

You

• Make sure that there are no obstacles between

Before

the remote control and the remote sensor on the

 

unit.

 

• Use within the operating range and angle, as

 

shown.

 

5m (16 feet)

Up

Connecting

30

30

 

• Remote operation may become unreliable if

 

strong sunlight or fluorescent light is shining on

 

the unit’s remote sensor.

Displays

other equipment located close to this unit.

• Remote controllers for different devices can

 

interfere with each other. Avoid using remotes for

 

• Replace the batteries when you notice a fall off in

&

Control

the operating range of the remote control.

 

Note (USA only)

 

• When using this player independently, set the

 

REMOTE CONTROL switch on the rear panel to

Started

INT. (INTERNAL) (see page 10).

 

DVD-Video regions

Getting

 

All DVD-Video discs carry a region mark

Playing Discs

 

on the case somewhere that indicates

 

which region(s) of the world the disc is

Menu

compatible with. Your DVD player also has

 

a region mark, which you can find on the

Setup

will not play in this player. Discs marked

rear panel. Discs from incompatible regions

DVD

ALL will play in any player.

 

 

Additional Information

7

1

You Before

Start

Discs Playing Started Getting Displays & Control Up Connecting

Setup DVD

Menu

AdditionalInformation

ENGLISH

Before You Start

Discs compatible with this player

Any disc that displays one of the following logos should play in this player. Other formats, including DVD-RAM, DVD-ROM, CD-ROM (except those that contain MP3/ DivX/WMA/JPEG files) and Photo CD will not play.

*This unit can play CD-R and CD-RW discs recorded in Audio CD or Video CD format, or with MP3 audio files or Windows Media audio files or picture files or DivX files.

*Some copy-controlled CDs may not conform to official CD standards. They are special discs and may not play on the DV4003.

*The DV4003 does not support the non-DVD side of a Dual Disc.

DVD-Video compatibility:

Logos:

Single-sided or double-sided discs

Single layer or dual layer discs

Dolby Digital, DTS, MPEG or Linear PCM digital audio

MPEG-2 digital video

Discs are generally divided into one or more titles. Titles may be further subdivided into chapters.

DVD-R compatibility:

This unit can play DVD-R discs. Please note the following points when using these discs:

Logo:

This unit can play DVD-R discs recorded as DVDVideo format.

Video CD compatibility:

Logo:

12cm (5in.) or 8cm (3in.) discs

MPEG-1 digital audio

MPEG-1 digital video

Video CDs are divided into tracks.

Super VCD compatibility:

Logo:

12cm (5in.) or 8cm (3in.) discs

MPEG-1 digital audio

MPEG-2 digital video

Super VCDs are divided into tracks.

DVD-RW compatibility:

This unit can play DVD-RW discs. Please note the following points when using these discs:

Logo:

This unit can play DVD-RW discs recorded as DVD-Video format, and DVD-VR format.

DVD-RW discs that were recorded with copyonce only permission can be played.

DVD+R/+RW compatibility:

Logo:

This unit can play DVD+R/+RW discs. Please note the followings points when using these discs.

Audio CD compatibility:

Logos:

12cm (5in.) or 8cm (3in.) discs

Linear PCM digital audio

Audio CD, CD-R* and CD-RW* formats CDs are divided into tracks.

8

ENGLISH

Before You Start

General information for

MP3/WMA/JPEG/DivX

This player can recognize in total about 650 files per folders and 300 folder per disc for MP3/ DivX/WMA.

When writing MP3/WMA/JPEG/DivX files to CD- R/RW discs, always be sure to set the writing format to ISO 9660 Level 1.

For MP3 and WMA files recorded in Variable Bit Rate (VBR), the unit may not display the actual elapsed time.

For, MP3 and WMA, this player is not compatible with multi-session discs. If you try and play a multi-session disc, only the first session will be played.

MP3 compatibility information

Files should be MPEG1 Audio Layer 3 format. The sampling rate is 11 kHz to 48 kHz, but it is depends on the bit rate. Incompatible files will not play.

Audio encoded at 128 kbps should sound close to regular audio CD quality. Although this player will play 32 kbps to 320 kbps, but it is depends on the sampling rate.

This player is compatible with ID3 ver.1.1 Tag.

Maximum 30 characters can be displayed on TV screen.

This player cannot play DVD-R/RW discs with recorded MP3 music data.

This player only plays tracks that are named containing the file extension “.mp3” or “.MP3”.

WMA compatibility information

The sampling rate is 44.1 kHz (bit rate: 64 kbps-192 kbps) and 48 kHz (bit rate: 128 kbps-192 kbps).

This player only plays tracks that are named with the file extension “.wma” or “.WMA”.

This player can not play the disc contents protected by Windows Media Digital Right Management (DRM).

Always be sure to specify a file extension of “.JPG” or “JPEG” for JPEG files. The file will not be able to be displayed if a file extension other than “.JPG” or “JPEG” is specified or if no file extension is assigned to the file. (Note that this means that JPEG files created on a Macintosh will not be able to be displayed as is.)

Depending on the file size and compression ratio, some JPEG pictures cannot be displayed correctly.

Maximum supported JPEG resolution are shown below:

For baseline JPEG, the supported maximum resolution is 3072 x 2048

For progressive JPEG, the supported maximum resolution is as shown:

Width x (Height + 128) < 3300000

DivX compatibility information

A file with an extension of “.avi” or “.divx” is called a DivX file.

Maximum 30 characters can be displayed on TV screen.

File should be MPEG1 Audio Layer 3 format and MPEG2 format.

Support for DivX 3.11, 4.x, 5.x, 6.x and Ultra.

Q-pel accurate motion compensation.

Global Motion Compensation (GMC) Playback.

Caution!

DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

There may be times when it is impossible to replay a CD-R/RW disc because of the

characteristics of the disc being used or because of dirt or scratches on the disc.

Unfinalized DVD-R/RW discs cannot be played.

JPEG compatibility information

While this player is designed to be able to handle image data recorded in JPEG format, no assurances are given that the player will be able to display image data recorded in all JPEG formats.

This player can display progressive JPEG images.

This player can display HD JPEG images.

Unfinalized CD-R/RW discs cannot be played.

For more information on using DVD-R/RW and CD-R/RW discs, see “Handling discs” on page 48.

Never try to replay anything other than a music CD (CDA format) or a CD-R/RW on which MP3 and/or JPEG files have been stored. Depending on the type of file, there may be times when doing so will result in problems or erroneous operation.

1

StartYou

Before

UpConnecting

Playing Discs Getting Started Control & Displays

MenuSetup

DVD

AdditionalInformation

9

2

You Before

Start

Discs Playing Started Getting Displays & Control Up Connecting

Setup DVD

Menu

AdditionalInformation

ENGLISH

Connecting Up

Easy setup

This easy setup is the minimum set of connections you need to start watching DVD-Video discs. Both sound and picture are fed directly to your TV using the supplied audio/video cables. For other possible connections, see pages 11 and 12.

Important

Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

1 Connect to a composite video

INT. EXT.

See Note:

input on your TV using the

 

 

 

 

 

Remote Switch

supplied Audio/Video cable.

 

 

 

 

 

(for USA only)

 

AUDIO CR/PR

VIDEO

REMOTE

 

Y

CONTROL

 

L

IN

 

 

 

 

 

 

INT. EXT.

 

R

OUT

 

 

S1

 

HDMI

DIGITAL CB/PB

A/V EUROCONNECTOR

AC IN

ANALOG COAX. COMPONENT

2 Connect to a pair of stereo audio

3

inputs on your TV using the supplied Audio/Video cable.

Connecting audio/video cables

Be sure to insert each plug fully for the best connection. The plugs and jacks are color-coded to make connection easier.

Connecting system control cables (USA only)

By connecting this DVD player to another Marantz audio component using a supplied system control cable, you can remotely operate the components as a single system.

When connecting to a component with a remote sensor, be sure to connect the REMOTE CONTROL IN jack of this DVD player to

the REMOTE CONTROL OUT jack of the component with the remote sensor.

When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the REMOTE CONTROL OUT jack of this DVD player.

Plug into a standard

AC wall outlet.

Note

When connecting to a standard TV, select

4:3 LETTER - BOX or 4:3 PAN SCAN in the TV Aspect setting (see page 40).

Connect the video output of the player directly to your TV. Because the player is designed to support an Analog Protection System copy card, there are cases when proper playback will be not be possible if the player is connected to the TV through a VCR and images are recorded and played on the VCR.

The player’s video output and S1 output are not be progressive.

Remote switch (USA only)

When using this DVD player independently, set this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to

EXT. (EXTERNAL).

10

ENGLISH

Connecting Up

Home theater video connections

This player outputs video in a number of different ways. Choose the one most suitable for your system using the guide below.

Important

Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

If your TV has a component video input, we

If your TV has a SCART input, we

1 recommend using it to connect directly to the

recommend using it to connect directly

COMPONENT VIDEO OUT of this player. Use

to the A/V EURO CONNECTOR on

the standard 3-jack component video output.

this player. (for Europe only)

 

AUDIO CR/PR

VIDEO

REMOTE

 

Y

CONTROL

 

L

IN

 

 

 

INT. EXT.

 

R

OUT

 

 

S1

 

HDMI

DIGITAL CB/PB

A/V EUROCONNECTOR

AC IN

ANALOG COAX. COMPONENT

2

Control & Displays Connecting Up Before You Start

3 If your TV and projector have

2 If a component input is not

4 Plug into a standard

a HDMI terminal for Video and

available to you, connect this

AC wall outlet.

Audio Input, we recommend

player to your TV or AV receiver

 

using it to connect directly to

using either the VIDEO or S1

 

the HDMI out of this player.

jacks.

 

Connecting SCART (for Europe only) and S-Video cables

SCART and S-Video cables will only plug in one way, so make sure the plug is correctly lined up with the jack before inserting. Be sure to fully insert for a good connection.

Note

The A/V EURO CONNECTOR can output composite or RGB component video. If you connect just one TV, use the A/V EURO CONNECTOR. You can select the type of video output by changing the COMPONENT setting in the DVD Setup Menu (page 41).

S-Video or composite video?

S-Video should give a better picture, so if you have an S-Video input, use it. S-Video cables are available from any good audio/ visual dealer.

Connecting HDMI cables

With an HDMI cable, both uncompressed video data and digital audio data (e.g., LPCM or bit stream data such as Dolby Digital, DTS, or MPEG data) can be transmitted with just a single connector.

By transmitting DVD image data directly as digital data without it being first converted into analog format, it becomes possible to provide the very finest in image quality (see pages 38, 42-43).

Note

The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

There may be no image output if connected to a TV or display that is not compatible with the above format.

Refer to the instruction manual of the TV or display to be connected to this unit for detailed information regarding the HDMI terminal.

When connecting a progressive input TV with the component output of the player, select ON in the Progressive setting (see page 40).

Information

Additional DVD Setup Menu Playing Discs Getting Started

11

2

You Before

Start

Discs Playing Started Getting Displays & Control Up Connecting

Setup DVD

Menu

AdditionalInformation

ENGLISH

Connecting Up

Home theater audio connections

Important

This player outputs multi-channel audio in digital form. Check the manual for your

amplifier/receiver to see what equipment it is compatible with (especially which digital formats such as Dolby Digital, DTS, etc. It can decode).

1 If your amplifier has stereo inputs only, connect them here.

Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

 

AUDIO CR/PR

VIDEO

REMOTE

 

Y

CONTROL

 

L

IN

 

 

 

 

 

 

INT. EXT.

 

R

OUT

 

 

S1

 

HDMI

DIGITAL CB/PB

A/V EUROCONNECTOR

AC IN

ANALOG COAX. COMPONENT

2 Connect to the coaxial input of your amplifier, if it has digital inputs.

Connecting analog audio cables

Be sure to fully insert each plug for the best connection. The plugs and jacks are color-coded to make connection easier.

3

Plug into a standard

 

AC wall outlet.

Connecting coaxial cables

 

Use an interconnector with a pin-type

 

(also called RCA

COAX

or phono) plug on

 

each end to connect

 

up digital coaxial-

 

type jacks. Make

 

sure that the plug is

 

pushed fully home.

 

12

ENGLISH

Controls & Displays

3

Front panel

1

STANDBY

POWER ON/STANDBY

2

3 4 5 6

DVD PLAYER DV4003

STOP

 

OPEN/CLOSE PLAY/PAUSE

/ /

PROGRESSIVE SCAN

AUDIO EX

USB

78

1STANDBY indicator

Lights when the unit is in standby.

2Disc tray

Place the disc here.

3§ (STOP/OPEN/CLOSE)

Stops playing the disc play.

Press to open and close the disc tray when stop mode.

46 (PLAY/PAUSE)

Begins playing the disc play.

Pauses playing the disc play, when playing.

54 /1

Press to skip reverse title, chapter, or track. You can also press and hold this button for Fast Reversed.

6¡/¢

Press to skip forward title, chapter, or track. You can also press and hold this button for Fast Forward.

90 -

7POWER ON/STANDBY

Press to turn the power on, and press it again to enter STANDBY mode.

8Display

Operation indications are displayed here.

9AUDIO EX indicator

Lights when the AUDIO EX is activated using the AUDIO EX button on the remote control.

The sound quality of analog audio output is improved by turning off analog video signal output and the front panel display.

It is applied to CDDA, Super Audio CD (CD Layer) and DTS CD in Play mode.

10USB indicator

Lights when the USB function is activated.

11 (USB) Jack

Input for USB flash drive.

Display

2 3

HDMI

PRGSV

1

1Character display

2HDMI indicator

When the connected device is HDMI/DVI compatible, the light flashes red.

3PRGSVE indicator

Lights when unit is outputting progressive scan (non-interlaced) video.

Information

Additional DVD Setup Menu Playing Discs Getting Started Control & Displays Connecting Up Before You Start

13

ENGLISH

3 Controls & Displays

Additional Menu Setup DVD Discs Playing Started Getting Displays & Control Up Connecting Start You Before

Information

Remote control

1

 

2

!

3

@

4

#

5

$

 

6

%

 

^

7

&

 

*

 

(

8

)

 

_

9

 

0

+

-

 

=

¡

 

~

 

1AUDIO EX – Press to turn AUDIO EX off and on

The sound quality of analog audio output is improved by turning off analog video signal output and the front panel display.

HDMI video output cannot be switched off.

2OPEN/CLOSE – Disc tray open/close – pages 15, 40, 41

3ZOOM page 23

4HDMI page 42

The HDMI on/off state toggles when pressed for three seconds or more. When on, the HDMI indicator is lit.

Pressing this button while HDMI is enabled displays the current resolution. Pressing this button again while the resolution is displayed allows you to select the resolution in the sequence below:

480p Æ 576p Æ 720p Æ 1080i Æ 1080p Æ 480p

5REPEAT pages 20, 27 A–B page 21

6ANGLE pages 22, 41

7INPUT (%/) button – These buttons can switch between devices compatible with Marantz receivers. Refer to the receiver instruction manual for further details.

Applicable models: PM-11S1, PM-15S1, PM6001, PM7001, PM8001, SR9600.

(These models may not be handled depending on the area.)

Non-applicable models: MARANTZ Amplifiers and receivers which had released before 2006, including PM-14, PM-17 and PM4001 except above models.

84 (PREV.)/¢ (NEXT)– Skip – pages

16, 17, 18, 27, 28, 36, 46

Allows you to search forward/backward through a disc. Use to skip the title, chapter or track.

Press and hold (4) for Fast Reversed.

Press and hold (¢) for Fast Forward.

9SCAN – page 24

10TOP MENU (TOP-M)/RETURN page 17

11Cursor (2/3/5/) / ENTER button

12DISPLAY (DISP.) page 25, 26

13DISC SKIP – Selects USB mode. – page 31

14POWER – Switches the player on or into standby – page 15

15SOUND MODE– It is not used on this set.

16PAGE – It is not used on this set.

17RANDOM page 21

18AUDIO pages 23, 35, 40, 41

19SUBTITLE pages 22, 30

20VOLUME (5/) button – These buttons can adjust the volume of devices compatible with Marantz receivers. Refer to the receiver instruction manual for further details.

21MUTE button – This button can activate the mute function of devices compatible with Marantz receivers. Refer to the receiver instructions for further details.

223 (PLAY) pages 15, 16, 18, 19, 27, 28,

29, 30, 34

238 (PAUSE) pages 16, 19

247 (STOP) pages 16, 28, 29, 31, 32

25MENU page 17

26SETUP pages 32, 34, 37, 39, 44

27Number buttons pages 16, 17

Note

HDMI ON is set when the unit is shipped from the factory.

Set HDMI under the DVD Setup Menu to use HDMI functions (see pages 38, 42-43).

14

ENGLISH

Getting Started

Playing discs

The basic playback controls for playing discs are covered here. Further functions are detailed in the next chapter.

Note

• Throughout this manual, the term “DVD” means DVD-Video, and DVD±R/RW. If a function is specific to a particular kind of DVD disc, it is specified.

1 Press the POWER ON/STANDBY button on the front panel or POWER button on the remote control.

If you are playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input.

2 Press § (STOP/OPEN/CLOSE) on the front panel or 0 (OPEN/CLOSE) on the remote control to open the disc tray.

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to play face down).

4 Press 6 (PLAY/PAUSE) on the front panel or 3 (PLAY) on the remote control to start playback.

 

If you are playing a DVD or Video CD, a menu may

OPEN/CLOSE PLAY/PAUSE

appear (see page 17).

STOP

 

/

/

 

AUDIO EX

USB

Note

 

 

• For one-sided, two-layer discs containing movies, etc.,

 

 

there may be a short image stoppage at the point

 

 

where the layers change. This is not a malfunction.

 

 

• Depending on the DVD or VIDEO CD, some

 

 

operations may be different or restricted.

4

StartYou

Before

UpConnecting

Playing Discs Getting Started Control & Displays

MenuSetup

DVD

AdditionalInformation

15

4

You Before

Start

Discs Playing Started Getting Displays & Control Up Connecting

Setup DVD

Menu

AdditionalInformation

ENGLISH

Getting Started

Basic playback controls

Button

What it does

3Starts playback.

(Remote Control) In title menu, it functions as the Enter key.

8Pauses a disc that’s playing.

(Remote Control)

Each time the button is pressed, a new

 

frame will appear.

 

 

7

Stops playback.

(Remote Control)

 

 

 

6

•Starts playback when stop mode

(Front panel)

•Pause a disc that's playing

 

 

§

•Stops playback that’s playing

(Front panel)

•Open the disc tray when stop mode

4Skips to the start of the current track or chapter, then to previous tracks/chapters.

Press and hold for Fast Reversed.

¢

Skips to the next track or chapter.

 

Press and hold for Fast Forward.

 

 

Numbers

Playback starts from the selected track/

 

chapter number.

 

 

ENTER

Select the current menu option.

 

 

Resuming playback from the last stopped point

This DVD system is able to resume disc playback from its last stopped point (only possible for the last 10 discs that were recorded without a menu).

1Load one of the last 10 discs played.

2While “LOADING” appears on the display panel, press PLAY 3 to start playback from the last stop point.

To cancel the resume mode

Press 7 twice.

Important

While using the DVD playback controls, you may see the mark displayed on-screen. The mark means that the operation is not allowed by the player and disc.

Note

DVD-VR (Video Recording) format, MP3, DivX and USB device don't allow Resuming playback.

16

ENGLISH

Getting Started

Navigating DVD disc menus

Many DVD discs contain menus. Sometimes these are displayed automatically when you start playback; others only appear when you press MENU or TOP-M.

Button

What it does

TOP-M

Displays the “top menu” of a DVD disc.

 

This varies with the disc.

 

 

MENU

Displays a DVD disc menu—this varies

 

with the disc and may be the same as the

 

“top menu”.

 

 

RETURN

Returns to the previously displayed menu

 

screen.

 

 

Cursor

Moves the cursor around the screen.

(2/3/5/)

 

 

 

ENTER

Selects the current menu option.

 

 

Numbers

Selects a numbered menu option

 

(some discs only).

 

 

Navigating Video CD PBC menus

Some Video CDs have menus from which you can choose what you want to watch. These are called PBC (Playback control) menus.

Press the MENU to turn the PBC function on or off.

Note

• Some discs don’t allow PBC menus.

Button

What it does

RETURN

Displays the PBC menu.

 

 

Numbers

Selects a numbered menu option.

 

 

ENTER

Selects the current menu option.

 

 

4

Displays the previous menu page

 

(if there is one).

 

 

¢

Displays the next menu page

 

(if there is one).

 

 

4

StartYou

Before

UpConnecting

Playing Discs Getting Started Control & Displays

MenuSetup

DVD

AdditionalInformation

17

+ 37 hidden pages