Manitowoc Ice K00180 User Manual

Size:
40.72 Kb
Download

K00180

IB-0620/0820/1020

ON A CORNELIUS 44.38” WIDE ICE DISPENSER (ENDURO 300)

Installation Instructions

1.Set adapter on top of the dispenser. Be sure to position the adapter with the backside flange tight to the dispenser.

2.Install bracket under adapter and align front edge.

3.Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots. NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop!

4.Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.

5.Set the ice machine on top of the adapter. Align holes in ice machine front angle with the rivnuts on the adapter.

6.Secure the ice machine to the adapter with two (2) #8-32thumbscrews supplied with the ice machine.

7.Set the front bin covers onto the dispenser. Set the left side cover down first and then the right side cover. The covers will latch together at the center seam and also to the adapter along the back flange of the covers.

8.Rotate retaining arms into position, as shown for normal ice machine operation.

#8-32Thumbscrew

Two (2) Places

Adapter

LH Retaining Arm

Left Bin

Cover #8 Screw

4 Places

Bracket

RH Retaining

Arm

 

Right Bin

Cover

Manitowoc Ice, Inc.

 

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720USA

 

Telephone 920-682-0161,Fax - Sales:920-683-7589,Service/Parts:920-683-7585,Other:920-683-7879

8005913

Web Site - www.manitowocice.com

Rev. 04/12/02