Size:
18.67 Kb
Download

K00067 ICE BAGGER

Installation Instructions

ASSEMBLING BAGGER MOUNTING BRACKET

1.Remove the ice chute.

2.For left-handedusers, assemble the bagger mounting bracket on the left side, as illustrated in Figure A. Forright-handedusers, assemble the bagger mounting bracket on the right side of the bagger cabinet, using the machine screws and lockwashers provided.

TO USE ICE BAGGER

1.Hang bags on the rear bracket through the rectangular slot in the bag hanger (see Figures B and C).

2.Place supplied twist ties in front tray.

3.Replace the ice chute.

4.Pull open one bag under the ice chute.

5.Fill bag with ice, leaving enough room so the bag can be twisted and closed.

6.Firmly pull bag of ice off of hanger, twist, and close with twist tie.

REFILLING EMPTY BAG HANGER

1.Remove empty wire wicket from bag hanger and discard.

2.Lay wicket of new bags down on a flat surface with ends of wicket sticking straight up.

3.Slide the bag hanger down onto the wire wicket so that the ends of the wire wicket go through the holes in the bag hanger.

4.Tuck the top ends of the bags under the tab on the front of the bag hanger.

5.Keep the bags and hanger lying flat. Use one hand to compress the wire wicket, bags, and hanger. While one hand compresses, use your other hand to pull up the ends of the wire wicket and bend them 90 toward center.

6.Tuck the ends of the bent wire wicket under the tab on the back of the bag hanger.

7.Remove the cardboard from the front of the bags and hang bags in place.

Manitowoc Ice, Inc.

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720USA

8008093

Telephone 920-682-0161,Fax - Sales:920-683-7589,Service/Parts:920-683-7585,Other:920-683-7879

Rev. 10/03/97