Manitowoc Ice CORNELIUS ENDURO K00342 User Manual

Size:
96.96 Kb
Download

K00342 IB-0620/0820/1020

ON A CORNELIUS ENDURO 200/250 ICE DISPENSER

Installation Instructions

1.Set adapter on dispenser. Position the adapter so that the front flange of the adapter will be up against the front lip of the dispenser. Adapter may have to be moved towards the back of the dispenser.

2.Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots. NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop!

3.Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.

4.Set the ice machine on top of the adapter. Align holes in ice machine front angle with threaded bosses on the adapter.

5.Secure the ice machine to the adapter with two (2) #8-32screws supplied with the kit.

6.Set the bin cover on the adapter, move backwards until the cover hits the stop, and lower the plastic cover insuring that the latch locks.

7.To remove the bin cover, twist the knob, lift up, and pull forward.

Place a large fillet of food grade RTV inside edge along both sides where adapter touches bin

#8-32Screw

2 Places

Adapter

Bin Cover

#8 Screw

 

 

4 Places

Deflector must stay in place

Manitowoc Ice, Inc.

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI54221-1720USA

 

Telephone 920-682-0161,Fax - Sales:920-683-7589,Service/Parts:920-683-7585,Other:920-683-7879

8014453

Web Site - www.manitowocice.com

04/04/03