Makita HG 5010, HG 5011, HG 6010, HG 6020, HG 6300 User Manual

0 (0)

Makita Corporation

Anjo, Aichi, Japan

www.makita.com

HG 5010

HG 5011

HG 6010

HG 6020

HG 6300

110016930 02/2011 Subject to technical modifications.

HG 5010 / HG 5011 / HG 6010 / HG 6020 / HG 6300

500 - 630 °C		250 - 300 °C		250 - 500 °C

	A		B		C

500 - 630 °C		250 - 300 °C		630 °C

D		E		F

HG 6020 / HG 6300

250 - 400 °C		300 °C		300 - 400 °C

G		H		I

HG 6300		HG 6020

2	8	2	7
		2	7

							9



1	3	1						3
		1						3
					6
		10						10			6






						4


									4
									4
			9	5
			9


									5
									5
			8							7
			8							7

HG 6010	HG 5011	HG 5010

2	2	2





1			1							1
	3									1
	3							6		6
		10			6	4			4		4







				5			5

- 2 -

- 3 -

Thank you

for deciding to choose a Makita	drying, shrink-fitting, stripping paint	Used in the proper manner
heat gun. This tool can be used	etc. All Makita tools are manufac-	(please read the information on
for completing a wide range of	tured to the highest standards and	p. 8), this heat gun will give you
jobs safely and reliably, such as	undergo a strict process of quality	lasting satisfaction.
soldering, welding PVC, shaping,	control.

Technical specifications

HG 6300

HG 6020

HG 6010

HG 5011

HG 5010

Mains voltage

230 – 240 V, 50 Hz

Output

2000 W

1800 W

1600 W

1400 W

Stage

Airflow (l/min)

150

300

500

150

300

500

200

300

500

240

450

240

450

Temperature (°C)

50 – 630

50 – 600

400

600

300

500

300

500

continuous in

Temperature

10 °C steps by

9 steps by

–

setting

pushbutton controls

thumbwheel

Temperature

–

display

LCD display

–

Protection class

(without earth terminal)

Overheating protection

yes

thermal cut-out

yes

thermal cut-out

only

Subject to technical modifications

Tool elements

1	Stainless steel outlet	4	Soft stand for stable,	7	Thumbwheel for setting
2	Air intake with lattice guard to		non-slip stationary work		temperature
2	Air intake with lattice guard to	5	Heavy-duty rubber-sheathed		Pushbutton for setting
	keep out foreign matter	5	Heavy-duty rubber-sheathed	8	Pushbutton for setting
3	Detachable guard sleeve		cord		temperature
3	Detachable guard sleeve	6	Air flow switch	9	Temperature monitor LCD
	(for poorly accessible places)	6	Air flow switch	9	Temperature monitor LCD
			(2-stage/3-stage)	10	Soft grip handle for com-
				10	Soft grip handle for com-

fortable operation

CE Declaration of Conformity

This product complies with Low Voltage Directive 06/95/EC, EMC Directive 04/108/EC as well as RoHS Directive 02/95/EC.

Features - Getting started

Please note: The distance from the object you are working on depends on material and intended method of working. Always try out the airflow and temperature on a test piece first! Using the attachable accessory nozzles (see accessories page on the cover) the flow of hot air can be controlled with maximum precision. Take care when changing hot nozzles! When using the heat gun in the self-resting position, make sure

it is standing on a stable, non-slip and clean surface.

HG 5010 / HG 5011

The tool is switched ON and OFF at the two-stage switch (6) on the back of the grip handle (HG 5011) or on the front of the grip handle (HG 5010). Airflow and temperature can be adjusted to 2 settings. Stage 1 reaches 300 °C at an airflow of 240 l/min, stage 2 reaches 500 °C at 450 l/min.

HG 6010

The tool is switched ON and OFF at the three-stage switch (6) on the back of the grip handle. Airflow and temperature can be adjusted to 3 settings. Stage 1 is a cold-air stage at 50 °C with an airflow rate of 200 l/min. Stage 2 reaches 400 °C at an airflow of 300 l/min, stage 3 delivers 600 °C at 500 l/min. The guard sleeve (3) detaches at a bayonet catch.

HG 6020

The tool is switched ON and OFF at the two-stage switch (6) on the back of the grip handle. In addition to three-stage speed/airflow control (stage 1 is a cold-air stage at 50 °C ), temperature can be continuously adjusted over a range of 50 °C – 600 °C at the thumbwheel (7). The numbers (1 to 9) on the thumbwheel serve as a guide only. Whereas ”1” means 50 °C, the maximum temperature of 600 °C is attained at ”9”. Airflow can be adjusted to the three stages of 150/300/500 l/min. The guard sleeve (3) detaches at a bayonet catch.

Temperature	Temperature		Temperature			Sample
Dial Setting	Range °F		Range °C			Applications
1	100	– 160 °F	38	– 71 °C		cleaning surfaces
2	200	– 300 °F	93	–149 °C		activating adhesives
3	375	– 475 °F	191	– 246 °C		shaping/removing flooring materials
4	475	– 575 °F	246	– 302 °C		welding PE, LDPE, PP, thawing pipes
5	600	–700 °F	316	– 371 °C		welding ABS, PBT, PC; lap welding plastic sheeting
6	725	–825 °F	385	– 441	°C	de-soldering circuit boards
7	850	– 950 °F	454	– 510	°C	stripping paint, loosening nuts/screws
8	975	–1075°F	524	– 579	°C	de-soldering copper pipes
9	1025	–1125°F	552	– 607 °C		soldering

HG 6300

The tool is switched ON and OFF at the three-stage switch (6) on the back of the grip handle. In addition to three-stage speed/airflow control, temperature can be continuously adjusted over a range of 50 °C to 630 °C by the pushbuttons (8). The target temperature can be increased in 10 °C steps by pressing the ”+” side of the temperature pushbutton (8) or reduced by pressing the ”-” side of the temperature pushbutton (8). Pressing the button briefly increases or reduces the target temperature by one 10 °C step. Keeping the button pressed will continue to increase or reduce the temperature in steps of 10 °C until the button is released or the minimum or maximum temperature is set.

Blower stage 1 delivers a temperature of 50 °C. The tool will take a short while to cool to 50 °C after switching down to blower stage 1 when it has been operating at high temperatures on blower stage 2 or 3. While the tool is cooling down, the LCD display (9) shows the actual temperature at the nozzle outlet. After switching off, the tool stays in the last setting. The guard sleeve (3) detaches at a bayonet catch.

- 4 -

- 5 -

+ 4 hidden pages