Owner's Manual
ZV450MW8A
DIGITAL VIDEO DISC RECORDER & VIDEO CASSETTE RECORDER
WITH DIGITAL TUNER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE
USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2007 Funai Electric Co., Ltd.
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Laser Safety
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The caution marking is located on the rear of the cabinet.
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1)Reorient or relocate the receiving antenna.
2)Increase the separation between the equipment and receiver.
3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4)Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Make your contribution to the environment!!!
•Used up batteries do not belong in the dust bin.
•You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain this information for future reference.
Model No. _____________________
Serial No. _____________________
2EN
PRECAUTIONS
Important Safeguards
1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2.Retain InstructionsThe safety and operating instructions should be retained for future reference.
3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4.Follow Instructions - All operating and use instructions should be followed.
5.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7.Water and MoistureDo not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer’s instructions and should
use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
9.Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
10.Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
11.Grounding or Polarization - This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12.Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13.Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING |
ANTENNA |
LEAD |
|
AS PER NATIONAL ELECTRICAL CODE |
WIRE |
GROUND |
|
CLAMP |
|
|
ANTENNA |
|
DISCHARGE UNIT |
|
(NEC SECTION 810-20) |
ELECTRIC |
|
SERVICE |
|
EQUIPMENT |
GROUNDING CONDUCTORS |
|
(NEC SECTION 810-21) |
|
GROUND CLAMP |
NEC – NATIONAL ELECTRICAL CODE |
POWER SERVICE GROUNDING |
S2898A |
ELECTRODE SYSTEM |
|
(NEC ART 250, PART H) |
14.Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16.Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
18.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the product.
c.If the product has been exposed to rain or water.
d.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e.If the product has been dropped or damaged in any way.
f.When the product exhibits a distinct change in performance this indicates a need for service.
20.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
22.Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
EN 3
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
PRECAUTIONS
Installation Location
For safety and optimum performance of this unit:
•Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.
•Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
•Do not handle the power cord with wet hands.
•Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.
•If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Notice for Progressive Scan Output
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with
this 525p (480p) DVD player, please contact our customer service center.
Supplied Accessories
remote control (NB555UD) with batteries (AAAx2)
RF coaxial cable (WPZ0901TM002)
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
owner's manual (1VMN23648A)
quick guide (1VMN23649A)
4EN
PRECAUTIONS
Maintenance
Servicing
•Please refer to relevant topics on “TROUBLESHOOTING” on pages 93-96 before returning the product.
•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.
Cleaning the cabinet
•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.
Cleaning discs
•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.
•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.
Cleaning the disc lens
•If this unit still does not perform properly although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc handling
•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
•Always store the disc in its protective case when it is not used.
Auto head cleaning
•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.
©2007 Funai Electric Co., Ltd.
1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.
2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.
Note
•Remember to read the instructions along with the video head cleaner before use.
•Clean video heads only when problems occur.
IR signal check
If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of malfunction.
• With an AM radio:
Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.
• With a digital camera (including built-in camera of cellular phone):
Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN 5
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
CONTENTS
Introduction
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .9
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connections
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 15 RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 16 CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 17 CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 19
Basic Setup
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Finding the Viewing Channel on Your TV . . . . . . . . . . 20 Guide to On-Screen Display / Menu. . . . . . . . . . . . . . . . 21 Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Switching DVD / VCR Mode. . . . . . . . . . . . . . . . . . . . . . . . 24 How to Insert a Disc / Cassette Tape . . . . . . . . . . . . . . . 24
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 27
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 31 Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Recording
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 37 BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 38 Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 38
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 39 TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 44
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 45
Overwriting from the Beginning of the Title. . . . . . . . 45 Overwriting in the Middle of the Title . . . . . . . . . . . . . . 45 Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 47
Connection to an External Device. . . . . . . . . . . . . . . . . . 47 Recording from an External Device . . . . . . . . . . . . . . . . 48
BI-DIRECTIONAL DUBBING . . . . . . . . . . . . . . . . . . . . . . 49 SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 51 PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 52
Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6EN
CONTENTS
Introduction
Playback
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 54 BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 57 Playing Back an Audio CD and a CD-RW/-R
with MP3 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 59 Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 60 Skipping TV Commercials During Playback. . . . . . . . . 60 Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 61 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 66
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 66 Switching Virtual Surround System . . . . . . . . . . . . . . . . 67 Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 67 Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Editing |
|
|
Connections |
|
|
|
|
INFORMATION ON DISC EDITING. . . . . . . . . |
. . . . . . . . 68 |
|
|
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 68 |
|
|
Editing Discs |
68 |
|
|
|
|
||
. . . . . . . . . . . . . . . . . . . . . . . . . . .EDITING DISCS |
. . . . . . . 69 |
|
Basic |
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 69 |
|
|
Putting Names on Titles . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 70 |
|
|
Setting Chapter Marks |
71 |
|
Setup |
|
|
||
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 72 |
|
|
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 74 |
|
|
Setting Pictures for Thumbnails |
75 |
|
|
|
|
||
Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 76 |
|
Recording |
Making Edits Compatible. . . . . . . . . . . . . . . . . . |
. . . . . . . . 80 |
|
|
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 77 |
|
|
Setting or Releasing Disc Protect . . . . . . . . . . |
. . . . . . . . 78 |
|
|
Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 79 |
|
|
Function Setup |
|
|
|
|
|
|
|
|
|
|
|
LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . 81 |
|
Playback |
SETUPS |
83 |
|
|
|
|
||
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 83 |
|
|
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 86 |
|
|
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 88 |
|
|
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 89 |
|
|
|
|
||
VCR Functions |
|
|
Editing |
VCR FUNCTIONS |
90 |
|
|
|
|
||
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 90 |
|
|
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 90 |
|
|
One-touch Timer Recording (OTR) . . . . . . . . . |
. . . . . . . . 91 |
|
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Index Search |
. . . . . . . . 91 |
|
|
Time Search |
92 |
|
Function |
|
|
||
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 92 |
|
|
Others |
|
|
Setup |
TROUBLESHOOTING |
93 |
|
|
|
|
||
Frequently Asked Questions. . . . . . . . . . . . . . . |
. . . . . . . . 95 |
|
|
|
|
||
. . .Note for Output Jacks on the Rear Panel |
. . . . . . . . 95 |
|
VCR |
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . 97 |
|
|
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . 98 |
|
Functions |
Español |
99 |
|
|
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . |
|
|
|
ESPAÑOL |
100 |
|
|
|
|
||
|
|
||
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . |
Back cover |
|
Others |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Español |
|
EN |
7 |
|
|
|
FEATURES
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit.
Recording |
|
VCR mode |
|
|
|
This unit is compatible with DVD+RW/DVD-RW, which are rewritable repeatedly and DVD+R/DVD-R, which are available for recording once. Even if you choose DVD- RW/DVD-R, these discs will automatically be recorded in the DVD+VR mode. Also, this unit allows you to record to the cassette tape. You can choose either one for your convenience.
DVD mode VCR mode
Up to 12 program recording:
You can program the unit to record up to 12 programs within a one-month period. Daily or weekly program recordings are also available.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours for DVD, and 8 hours for VCR. The recording automatically stops when the recording time you set is reached or the disc is full.
Dubbing mode:
You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or a cassette tape is not copy protected.
You cannot record on a cassette tape when its erase-pro- tection tab is removed.
Left channel stereo recording:
This unit can record the sound of the left channel monaural input as left and right channels automatically.
DVD mode
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before attempting to record.
Automatic title list making:
The unit makes a title list with the index automatically.
Playback
DVD mode
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2 channel stereo system.
Playing back MP3 files:
You can enjoy MP3 files which are recorded on CD-RW/-R.
Quick search for what you want to watch:
You can easily find the part you want to watch using the index search/time search functions. An index mark will be assigned at the beginning of each recording you make. For time search function, you can go to a specific point on a cassette tape by entering the exact amount of time you wish to skip.
Editing
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without permission, you can hide chapters.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
Dividing titles:
You can divide a title into 2 or more.
Putting name on disc:
You can put your favorite disc name.
Compatibility
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it
is recommended to finalize in order to stabilize the performance. For DVD-RW/-R, you need to finalize the recorded discs to play back on other DVD players.
Others
DVD mode
Progressive scan system
Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.
8EN
FEATURES
Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate.
*DVD-RW/-R recorded in VR mode or non compatible recording format are not playable.
*DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 79).
*DVD-R recorded in the mode other than +VR is not recordable on this unit.
Symbol Description
For Recording, Playing Back, and Editing
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
For Recording and Playing Back
Description refers to VHS tapes
Use only cassettes marked VHS ()
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media.
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
EN 9
FUNCTIONAL OVERVIEW
Front Panel
1 |
2* |
3 |
23 |
22 |
21 2019 18 17 |
16 |
15 |
14 |
13 12 11 10 |
9 |
8* 7 |
6 |
5 |
4 |
(*) The unit can also be turned on by pressing these buttons or inserting a cassette tape.
1. Cassette compartment (VCR)
Insert a cassette tape here.
2. OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
Place a disc when it is open.
4. AUDIO input jacks (E2) (DVD/VCR)
Use to connect external device with an RCA audio cable.
5. VIDEO input jack (E2) (DVD/VCR)
Use to connect external device with an RCA video cable.
6. S-VIDEO input jack (E2) (DVD/VCR)
Use to connect the S-video output of external device with an S-video cable.
7. RECORD Ibutton (DVD)
Press once to start a recording.
Press repeatedly to start the one-touch timer recording.
8. PLAY B button (DVD)*
Press to start or resume playback.
9. STOP C button (DVD)
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
10.DVD indicator
Lights up when the DVD output mode is selected.
11.SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
12.VCR indicator
Lights up when the VCR output mode is selected.
13.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu.
10 EN
FUNCTIONAL OVERVIEW
Rear Panel
1 |
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
OUT |
|
|
DVD |
|
|
|
DVD/VCR |
|
|
|
DIGITAL |
AUDIO S-VIDEO |
COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
||
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
|
Y |
|
L |
L |
IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
L |
OUT |
PB |
IN |
R |
R |
|
|
|
/CB |
|
|
|||||
|
|
|
|
|
|
|||
COAXIAL |
|
|
|
|
IN ---VIDEO---OUT |
|
|
|
|
R |
|
PR |
|
|
|
|
|
|
|
/CR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 |
1110 9 |
8 7 6 5 |
4 |
|
3 |
1.AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
2.ANTENNA OUT jack (DVD/VCR)
Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV monitor.
3.ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
4.AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other device with an RCA audio cable.
5.VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other device with an RCA video cable.
6.VIDEO IN jack (E1) (DVD/VCR)
Use to connect external device with an RCA video cable.
7.AUDIO IN jacks (E1) (DVD/VCR)
Use to connect external device with an RCA audio cable.
8.S-VIDEO IN jack (E1) (DVD/VCR)
Use to connect the S-video output of external device with an S-video cable.
9.COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video inputs with a component video cable.
10.S-VIDEO OUT jack (DVD only)
Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.
11.AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other device with an RCA audio cable.
12.COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.
Note
•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
•This unit does not have the RF modulator.
EN 11
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control.
1 Open the cover.
2 Insert batteries.
Using a Remote Control
Keep in mind the following when using the remote control:
•Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.
•Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.
•Replace the batteries when you notice a fall off in the operating range of the remote control.
•The maximum operable ranges from the unit are as follows.
-Line of sight: approx. 23 feet (7m)
-Either side of the center: approx. 16 feet (5m) within 30°
-Above: approx. 16 feet (5m) within 15°
-Below: approx. 10 feet (3m) within 30°
Make sure to match + and - on the batteries to the marks indicated in the battery compartment.
3 Close the cover.
Note
Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:
•Do not mix new and old batteries together.
•Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.
•Make sure that the + and - ends of each battery match the indications in the battery compartment.
•Remove batteries from battery compartment that is not going to be used for a month or more.
•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
•Do not recharge, short-circuit, heat, burn or disassemble batteries.
16feet (5m) |
23feet (7m) |
|
16feet (5m) |
|||
30˚ |
|
|
|
|
|
30˚ |
1 |
|
|
|
|
STANDBY-ON |
18 |
|
|
|
|
|
||
2 |
|
|
|
|
|
|
SOURCE |
DTV/TV |
DISPLAY OPEN/CLOSE |
19 |
|||
3 |
|
|
|
|
A |
|
|
.@/: |
ABC |
DEF |
|
||
4 |
1 |
2 |
|
3 |
|
|
|
GHI |
JKL |
MNO |
|
||
|
4 |
5 |
|
6 |
|
|
|
|
PQRS |
TUV |
WXYZ |
|
|
|
7 |
8 |
|
9 |
|
|
5 |
. |
SPACE |
CLEAR |
20 |
||
0 |
|
|
||||
6 |
DISC MENU |
|
SETUP |
21 |
||
7 |
|
|
o |
|
||
|
|
OK |
|
22 |
||
|
|
s |
B |
|||
8 |
|
TITLE |
|
|
RETURN |
23 |
|
|
p |
|
|||
10 9 |
|
|
|
|
|
24 |
|
j |
B |
i |
2625 |
||
11 |
|
F |
h |
g |
C |
27 |
12 |
|
|
CHANNEL |
|
|
|
|
|
-- |
|
+ |
28 |
|
13 |
REC MODE VCR |
DVD |
TIMER |
|||
14 |
|
REC |
|
|
AUDIO |
29 |
15 |
|
|
|
30 |
||
|
I |
|
TIMER |
|
||
16 |
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
31 |
||
|
|
|
|
|
||
17 |
SEARCH |
|
|
|
32 |
|
|
|
|
|
|
33 |
12 EN
FUNCTIONAL OVERVIEW
1.DISPLAY button (DVD/VCR)
•Press to display the display menu on or off.
2.DTV/TV button (DVD/VCR)
•Press to switch between digital TV (DTV) mode and analog TV (TV) mode.
3.SOURCE button (DVD/VCR)
•Press to select the appropriate input.
4.Number/Character buttons (DVD/VCR)
•Press to select channel numbers.
•Press to select a title/chapter/track/file on display.
•Press to enter values for the settings in the main menu.
•Press to enter title names.
•Press to start the index/time search in VCR mode.
5.Confirm ( • ) button (DVD/VCR)
Analog mode:
•Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
•Press to confirm the major / minor channel selection made by [the Number buttons].
6.DISC MENU button (DVD)
•Press to display the disc menu.
7.OK button (DVD/VCR)
•Press to confirm or select menu items.
8.TITLE button (DVD)
•Press to display the title list.
9.PREV H button (DVD)
•During playback, press to return to the beginning of the current chapter, track or file.
•When playback is in pause, press repeatedly to
reverse the playback step by step.
10.REW E button (DVD/VCR)
DVD mode:
•During playback, press to fast reverse playback.
•When playback is paused, press to slow reverse playback.
VCR mode:
•During playback, press to rewind the cassette tape or to view the picture rapidly in reverse.
11.PAUSE F button (DVD/VCR)
•Press to pause playback or recording.
12.CHANNEL/buttons (DVD/VCR)
DVD mode:
•Press to change the channel up and down.
VCR mode:
•Press to change the channel up and down.
•Press to adjust the tracking during playback or in slow motion of the cassette tape.
•While playback is in still mode, you can adjust the picture blurred vertically.
13.VCR button
•Press to select the VCR output mode.
14.REC MODE button (DVD/VCR)
•Press to switch the recording mode.
15.REC I button (DVD/VCR)
•Press once to start a recording.
•Press repeatedly to start the one-touch timer recording.
16.CM SKIP button (DVD)
•During playback, press to skip 30 seconds.
17.SEARCH button (VCR)
•Press to call up the index or time search menu.
18.STANDBY-ON y button (DVD/VCR)
•Press to turn the unit on and off.
19.OPEN/CLOSE A button (DVD/VCR)
DVD mode:
•Press to open or close the disc tray.
VCR mode:
•Press to remove the cassette tape from the cassette compartment.
20.CLEAR button (DVD/VCR)
DVD mode:
•Press to clear the password once entered or to cancel the programming for CD or to clear the selected marker number, etc.
VCR mode:
•Press to reset the tape counter.
21.SETUP button (DVD/VCR)
•Press to display the main menu.
•During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode.
22.Cursor K / L/ { / B buttons (DVD/VCR)
•Press to select items or settings.
23.RETURN button (DVD/VCR)
•Press to return to the previously displayed menu screen.
24.PLAY B button (DVD/VCR)
•Press to start playback or resume playback.
25.NEXT G button (DVD)
•During playback, press to skip to the next chapter, track or file.
•When playback is in pause, press repeatedly to forward the playback step by step.
26.FFW D button (DVD/VCR)
DVD mode:
•During playback, press to fast forward playback.
•When playback is paused, press to slow forward playback.
VCR mode:
•During playback, press to rapidly advance the cassette tape or view the picture rapidly in forward.
•When playback is paused, press to view the cassette tape in slow motion.
27.STOP C button (DVD/VCR)
•Press to stop playback or recording.
DVD mode:
•Press to exit from the title list.
28.DVD button
•Press to select the DVD output mode.
29.TIMER button (DVD/VCR)
•Press to display the timer programming list.
30.AUDIO button (DVD/VCR)
DTV mode:
•Press to switch the audio language for digital TV.
DVD mode:
•Press to display the audio menu during playback.
VCR mode:
•During playback of a Hi-Fi videotape, press to
change the audio out setting.
31.RAPID PLAY button (DVD)
•During playback, press to play back in a slightly faster/slower mode with keeping the audio quality.
32.TIMER SET button (DVD/VCR)
•Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode and to turn the unit on.
33.D.DUBBING button (DVD/VCR)
•Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu.
Note
•If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available.
Be sure to use [OPEN/CLOSE A] or [STOP/EJECT C A] on the unit.
EN 13
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
FUNCTIONAL OVERVIEW
Front Panel Display
|
|
2 |
3 |
|
|
|
1 |
PM |
DTV |
BS CS |
DR |
CD |
|
|
|
|
VCR |
4 |
||
|
|
|
|
|
DB HDD |
|
|
|
|
|
|
DVD |
|
|
|
|
5 |
|
|
|
1.
PM |
: Appears in the afternoon |
with the clock display. |
|
|
|
2. |
|
DTV |
: Appears when the channel is |
|
in DTV mode. |
3. Title / track / file and chapter mark
: Appears when indicating a title / track / file number.
: Appears when indicating a chapter number.
4. Current status of the unit
: Appears when playback is in pause, or in step by step playback.
:Appears when playing back a disc, or a cassette tape.
: Appears during slow forward / reverse playback.
: Appears when the timer programming or OTR has been set or is proceeding.
:Flashes when all timer recordings have been finished.
:Flashes when there is an error in programming.
:Appears during recording process.
:Flashes when a recording is in pause.
: Appears when this unit is in DVD output mode and a disc is in the unit.
:Appears during duplication process.
: Appears when this unit is in VCR output mode and a cassette tape is in the unit.
:Appears during duplication process.
VCR : Appears when this unit is in VCR output mode.
:Appears when the timer recording is proceeding in VCR.
DVD : Appears when this unit is in DVD output mode.
:Appears when the timer recording is proceeding in DVD.
:Appears when DVD is in the timer recording standby mode.
:Flashes when a program cannot be performed for some reasons.
DB |
: Appears during VCR to DVD |
|
duplication process. |
:Appears during DVD to VCR duplication process.
5.Displays the following
•Elapsed playback time
•Current title / chapter / track /file number
•Recording time / remaining time
•Clock
•Selected channel number
•Remaining time for one-touch timer recording
•VCR tape counter
Display Message
:Appears when VCR is in the timer recording standby mode.
:Flashes when a program cannot be performed for some reasons.
Appears when the disc tray is opening.
Appears when the disc tray is closing.
Appears when a disc is loaded on the disc tray.
Appears when data is being written on a disc.
Appears when the PBC function is activated. (Video CD playback only. Refer to page 55.)
14 EN
ANTENNA CABLE CONNECTION
This section describes how to connect your unit to an antenna, cable box, etc.
1Disconnect the power cord of your TV from the AC outlet.
2 Disconnect RF coaxial cable from antenna input jack of your TV. |
|
|
VHF / UHF |
|||||||||||||
|
rear of your TV |
|
|
|
|
|
|
antenna |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
or |
|
|
|
|
|
|
|
|
|
|
|
ANT. IN |
RF coaxial cable |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||
disconnect |
2 |
|
|
|
|
|
cable TV |
|||||||||
|
|
|
|
company |
disconnect
3Connect cables to the unit.
Make the basic connection as illustrated below.
rear of this unit
|
|
DVD/VCR |
|
DVD |
DVD/VCR |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S-VIDEO |
|
IN ---AUDIO---OUT |
AUDIO OUT |
OUT |
VIDEO OUT |
L |
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
Y |
IN |
|
|
|
|
VHF / UHF |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
L |
OUT /CB |
IN R |
R |
ANTENNA |
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
PB |
|
|
OUT |
|
|
|
|
antenna |
||||||||
|
|
|
L |
|
|
|
|
/CR |
IN ---VIDEO---OUT |
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
PR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
IN |
|
|
R |
|
|
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
IN ---VIDEO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
ANTENNA |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
rear of your TV |
|
|
|
or |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF coaxial cable |
RF coaxial cable |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable TV |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
company |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This connection is for |
|||||||||||||
RCA audio |
|
|
|
|
|
|
|
RCA video |
|
|
|
|
|
TV loop through only |
||||||||||||||
cable |
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
R |
|
L |
|
|
|
|
|
ANT. IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO IN VIDEO IN
Editing Playback Recording Setup Basic Connections Introduction
4Plug in the power cord of this unit and your TV to the AC outlet.
|
rear of your TV |
|
Supplied cables used in this connection are as follows: |
|
• RF coaxial cable x 1 |
|
• RCA audio cable (L/R) x 1 |
connect |
• RCA video cable x 1 |
Please purchase the rest of the necessary cables at your |
|
|
local store. |
*Once connections are completed, turn on the TV and rear of this unit begin initial setting.
Channel scanning is necessary for the unit to memorize all available channels in your area.
(Refer to “INITIAL SETTING” on page 25.)
Note
•For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before moving the unit.
•If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions.
•Antenna out is for tuner pass through only. DVD playback through the RF is not possible.
EN 15
Others Functions VCR Setup Function
Español
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below.
1)Disconnect the power cords of the devices from the AC outlet.
2)Make the connection as illustrated below.
3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.
4)Plug in the power cords of the devices to the AC outlet.
5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
rear of this unit
rear of your TV
ANT. IN
DVD/VCR DVD |
|
DVD/VCR |
|
OUT |
||
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
AUDIO OUT |
T |
|
VIDEO OUT |
|
|
|
S-VIDEO IN ---AUDIO---OUT |
Y |
L |
L |
IN |
||
|
|
|
|
|
|
ANTENNA |
|
L |
|
PB |
IN R |
R |
|
|
|
OUT /CB |
|
|||
COAXIAL |
|
|
|
IN ---VIDEO---OUT |
|
|
L |
R |
PR |
/CR |
||
|
|
VHF / UHF |
|
|
antenna |
|
|
|
IN |
|
|
|
R |
|
|
|
|
|
|
|
|
OUT |
RF coaxial |
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
IN ---VIDEO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
cable |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable TV |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
RCA audio |
|
|
|
|
|
|
RCA video |
|
|
|
|
RF coaxial cable |
|
|
company |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
cable |
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
L |
|
|
|
|
3 |
|
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
TO TV |
AUDIO IN |
VIDEO IN |
CHANNEL |
ANT. IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
Set channel 3 or 4
rear of your RF modulator
Supplied cables used in this connection are as follows:
•RF coaxial cable x 1
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
•RF modulator is not supplied with this unit. You need to purchase it at your local store.
•The quality of picture may become poor if this unit is connected to an RF modulator.
16 EN
CONNECTION TO A CABLE / SATELLITE BOX
1)Disconnect the power cords of the devices from the AC outlet.
2)Make the connection as illustrated below.
3)Plug in the power cords of the devices to the AC outlet.
Introduction
e.g.) |
S-video cable |
|
RCA video cable |
||
|
|
|
|
|
|
|
|
|
|
|
|
or |
|
rear of this unit |
|
|
|
|
|
|
|
|
RCA audio |
|
|
|
|
DVD/VCR DVD |
|
|
|
|
|
cable |
|
|
|
||
|
|
|
DVD/VCR |
|
OUT |
OUT |
|
|
|
|||
S-VIDEO |
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
||
AUDIO OUT |
T |
|
VIDEO OUT |
|
|
|
|
|
|
|
|
|
IN ---AUDIO---OUT |
Y |
|
L |
L |
IN |
|
|
|
|
|||
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
|
|
|
L |
OUT |
PB |
IN |
R |
R |
|
R |
L |
|
S-VIDEO |
|
COAXIAL |
/CB |
|
|
||||||||
|
R |
|
PR |
|
IN ---VIDEO---OUT |
|
|
AUDIO OUT |
VIDEO OUT |
|||
|
L |
|
|
/CR |
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
|
cable/satellite |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
IN |
|
R |
|
|
|
|
|
|
|
|
ANTENNA |
|
|
box |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||
|
|
|
IN ---VIDEO---OUT |
|
|
RF coaxial |
This connection is |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
for TV loop |
RF coaxial |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
through only |
cable |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANT. IN |
rear of your TV |
|
RF OUT ANT. IN |
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
satellite |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
RCA audio |
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
dish |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
RCA video |
|
|
|
|
|
|
|
RF coaxial |
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
cable |
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
L |
|
|
|
|
|
|
or |
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO IN
AUDIO IN
cable TV company
Supplied cables used in this connection are as follows:
•RF coaxial cable x 1
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
•Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider.
•Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack or COMPONENT VIDEO OUT jack (DVD only) for connecting to your TV.
With this setup:
•You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on.
•You cannot record one channel while watching another channel.
Note to CATV system installer
•This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
EN 17
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections
Español
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device. VCR and basic DVD connection
TV
|
|
|
|
|
|
|
|
|
|
|
|
R |
L |
VIDEO |
|
AUDIO IN |
IN |
this unit
|
DVD |
|
|
DVD/VCR |
|
|
DIGITAL |
AUDIO |
S-VIDEO |
|
S-VIDEO |
IN ---AUDIO---OUT |
|
AUDIO OUT |
OUT |
|
|
|
|
|
|
|
|
Y |
|
L |
L |
|
L |
OUT |
P |
IN |
R |
R |
|
/C |
|||||
COAXIAL |
|
|
|
|
IN ---VIDEO---OUT |
|
|
R |
|
P |
|
|
|
|
|
/C |
|
|
|
RCA audio cable
RCA video cable
|
AUDIO OUT (DVD/VCR) |
|
|
|
|
|||
|
|
VIDEO OUT |
|
|
|
|
||
Available on DVD only |
|
|
|
|
|
|
|
|
|
|
Method 1 |
|
|
Method 2 |
|||
analog audio |
|
good picture |
|
better picture |
||||
TV |
|
|
|
S-VIDEO IN |
|
|
COMPONENT |
|
|
|
|
|
|
|
|
|
VIDEO IN |
|
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|
|
|
(Green) |
|
|
|
|
|
|
|
|
PB/CB |
|
|
|
|
|
|
|
|
(Blue) |
|
|
|
|
|
|
|
|
PR/CR |
|
|
|
|
|
|
|
|
(Red) |
R L |
and |
|
|
|
or |
|
|
|
AUDIO IN |
|
|
|
|
|
|
||
RCA audio cable |
|
S-video cable |
component video cable |
|||||
this unit |
AUDIO OUT |
DVD |
|
VIDEO OUT |
AUDIO OUT |
DVD |
VIDEO OUT (Green) |
|
OUT |
|
OUT |
|
|||||
|
DIGITAL |
AUDIO S-VIDEO COMPONENT |
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
|||
|
|
|
|
Y |
|
|
|
Y |
DIGITAL AUDIODVDS-VIDEO |
|
|
|
|
|
|
|
(Blue) |
OUT |
|
|
|
|
|
|
|
|
AUDIO OUT OUT |
|
|
|
PB |
|
|
|
PB |
IN |
|
L |
OUT |
|
L |
OUT |
||
|
|
/CB |
|
/CB |
||||
L OUT |
|
|
|
|
||||
COAXIAL |
COAXIAL |
|
|
|
COAXIAL |
|
|
|
R |
|
|
|
|
|
(Red) |
||
|
|
|
|
|
|
|
|
|
|
|
R |
|
PR |
|
R |
|
PR |
|
|
|
/CR |
|
|
/CR |
||
|
|
|
|
|
|
|
||
AUDIO OUT (DVD) |
S-VIDEO OUT |
COMPONENT |
||||||
|
|
|
|
|
VIDEO OUTPUT |
Supplied cables used in this connection are as follows:
•RCA audio cable (L/R) x 1
•RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
•Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when you made either S-video or component video out connection.
•When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
To set progressive scan mode, refer to page 88
•This unit is compatible with the progressive scan system. The feature provides you the higher quality images than the traditional output system. To utilize this feature, you must set “Progressive Scan” to “ON”.
18 EN
CONNECTION TO AN AUDIO SYSTEM
•When you change the connections, all devices should be turned off.
•Refer to the manual accompanying external devices for more information.
|
|
|
|
|
2 Channel Analog Audio Connection |
|
|
|
|
|
Digital Audio Connection |
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
stereo system |
|
|
|
|
|
|
|
|
audio |
Dolby Digital decoder |
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COAXIAL |
digital audio |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
coaxial input |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
jack |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
analog audio |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
input jacks |
|
|
|
|
|
|
|
|
digital audio |
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or |
|
|
|
|
|
|
|
|
|
|
|
||||
RCA audio cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
coaxial cable |
|
|
|
||||||||||
|
|
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
|
DVD/VCR |
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL |
|
AUDIO S-VIDEO COMPONENT |
|
|
|
|
|
|
|
|||||
|
DIGITAL |
|
AUDIO S-VIDEO COMPONENT |
|
|
|
|
|
|
S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
|
||||||||||||||||||||
|
AUDIO OUT |
|
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
|
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
DVD |
|
DVD/VCR |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
DVD/VCR |
|
OUT |
|||
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL |
AUDIO |
S-VIDEO COMPONENT |
S-VIDEO IN ---AUDIO---OUT |
|
|
|
||
|
|
|
|
|
|
|
|
|
AUDIO OUT |
OUT |
|
VIDEO OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
OUT |
VIDEO OUT |
|
|
|
|
|
|
|
|
|
L |
OUT |
PB |
|
|
Y |
L |
L |
IN |
IN |
R |
|
|
|
|
|
|
L |
OUT |
PB |
|
Y |
L |
L |
IN |
||||||||
|
|
|
|
|
/CB |
L |
OUT |
/CP IN |
R |
R |
ANTENNA |
|
|
|
|
|
|
/CB |
L |
OUT /CP |
IN R |
R |
ANTENNA |
||||||||||||||
|
COAXIAL |
|
|
|
|
|
COAXIAL |
|
|
|
IN ---VIDEO---OUT |
|
|
IN ---VIDEO---OUT |
COAXIAL |
|
|
|
|
|
|
COAXIAL |
|
|
IN ---VIDEO---OUT |
|
|
|
|||||||||
|
|
|
|
|
|
|
R |
|
/C |
|
|
|
|
|
|
|
|
|
|
R |
/C |
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
|
|
|
R |
|
PR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
PR |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
/CR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/CR |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
this unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
|
|
|
|
|
|
|
|
DIGITAL AUDIO OUTPUT |
|
|
|
|
|
*MD deck or DAT deck can be also connected through coaxial jack.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Setting |
Setup >General Setting >Playback >Disc Audio > |
|
Connection |
Dolby Digital |
|
If output is Dolby Digital encoded audio, connect to a Dolby |
Stream |
|
Digital decoder. |
||
|
||
|
|
|
Connecting to an MD deck or DAT deck. |
PCM |
|
|
|
|
If not connected to any external devices. |
PCM |
|
|
|
|
* To complete these settings, refer to pages 84-85. |
|
Note
•The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.
•By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.
•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
EN 19
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
Input Mode Names for Common TV Brands (Example)
Admiral |
AUX |
Panasonic |
TV/VIDEO |
Curtis |
LINE1, LINE2, |
RCA |
INPUT, TV/VCR, |
Mathis |
00, 90, 91, 92, 93 |
|
00, 90, 91, 92, 93 |
GE |
INPUT, TV/VCR, |
Samsung |
TV/VIDEO |
|
00, 90, 91, 92, 93 |
|
|
Hitachi |
INPUT, AUX |
Sanyo |
VIDEO |
JVC |
VIDEO, VIDEO 1, |
Sharp |
00 |
|
VIDEO 2, VIDEO 3 |
|
|
Kenwood |
AUX |
Sony |
VIDEO1, VIDEO2, |
|
|
|
VIDEO3 |
LXI-Series |
00 |
Toshiba |
TV/GAME |
Magnavox |
AUX CHANNEL |
Zenith |
00 |
Note
1After you have made all the necessary connections, press [STANDBY-ON y] to turn on the unit.
2Turn on your TV.
•If connected to your VCR make sure it is switched off or in standby mode before proceeding.
3Press “2” on the TV’s remote control, then press channel down button repeatedly until you see “Initial Setup” menu.
Initial Setup
OSD Language
English
Français
Español
This is the correct viewing channel (external input channel) for the recorder.
•For some TVs, there may be a button on the TV’s remote control that accesses the external input channel. It may be labeled “SOURCE”, “AV”, or “SELECT”. In such case, press it repeatedly. Refer to your TV’s user manual for details.
•If more than 10 minutes have past since you have turned on the unit, you may see the MAGNAVOX screen saver instead of “Initial Setup” menu.
MAGNAVOX screen saver:
4Proceed to step 2 in “INITIAL SETTING” on page 25.
•Video input selection varies for different brand’s models of TVs.
•Consult your TV manufacturer if none of the above is successful.
20 EN
BEFORE YOU START
This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
Guide to On-Screen Display / Menu
The on-screen display changes in the following order |
|
|
|
Disc Information / Menu |
|
|||||
as you press [DISPLAY]. |
|
|
|
|
|
|
|
|||
|
|
6 |
|
|
||||||
|
|
OFF |
DVD mode |
|
|
|
||||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/ 5 1/ 5 0:01:00 / 1:23:45 |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
DTV Program Guide (only in DTV mode) |
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
|
Video |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH 10 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disc Information/Menu (only in DVD mode) |
5 |
|
|
1 |
2 |
|
or
VCR Information (only in VCR mode)
SP(2Hr) 1:53
Setup Basic Connections Introduction
Title Name Information (only in DVD mode) (only when DVD+RW/DVD+R/DVD-RW/DVD-R is in playback)
or
File Name Information (only in DVD mode) (only when a CD with MP3 files is in playback)
DTV Program Guide
|
|
|
1 |
|
|
5 |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
KABC |
DTV 6.1 |
||||||
25 |
|
A Day of Memories |
|
|
|
|
|||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|||
35 |
|
English 1/2 |
|
|
|
|
|||
|
|
|
|
|
|||||
|
|
|
A quarter-century ago, which may now |
||||||
|
|
|
qualify as the good old days of |
|
|
|
|
||
|
|
|
newspapering, run-of-paper sales |
||||||
45 |
|
|
|||||||
|
|
accounted for 80 percent of the |
|
|
|
|
|||
|
|
|
industry's advertising revenues. |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Broadcast station
2.Program title (max. 2 lines displayed)
3.Audio language (“Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.)
4.Program guide (max. 6 lines displayed)
5.Channel number
Note
•When the program guide is displayed in more than 7 lines, use [K / L] to scroll.
•“No description provided” is displayed when the program guide is not provided.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
3 |
|
*This is an example screen only for explanation. Displayed items vary depending on the disc you inserted.
1.Indicates a disc type and format mode.
2.Indicates a channel number or selected external input channel.
3.Indicates a recording mode and possible recording time left.
4.Indicates an operation status.
5.Each icon means:
: Search : Marker
|
: Audio |
|
: Noise Reduction |
: Subtitle |
: Zoom |
: Angle |
: Surround |
: Repeat |
|
6.Indicates the current title number/total number of titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title.
Others Functions VCR Setup Function Editing Playback Recording
Español
EN 21
BEFORE YOU START
|
|
|
|
VCR Information |
|
|
|
|
|
Title/File Name Information |
||||||
|
|
1 |
|
|
|
|
|
|
|
|
||||||
VCR mode |
|
|
|
|
|
|
|
|
Title Name Information |
|||||||
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
12:00AM |
|
|
Title Name |
|
|
||||||
|
|
|
|
|
CH 21 |
|
|
|
|
|
|
|
My Title |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
Stereo |
|
|
|
|
|
|
1 |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
File Name Information |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
File Name |
|
|
|
|
|
SP |
0:00:00 |
HIFI |
|
|
|
|
|
|
|
My File |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
5 |
6 |
1 |
|
* This is an example screen only for explanation. |
1. Displays title/file name. |
|
|
Displayed items vary depending on the cassette tape |
|
you inserted. |
|
1.Indicates current video status.
2.Indicates the current time.
3.Indicates a current channel number (or selected external input channel) and an audio status of the program.
4.Indicates a recording or playing back mode.
5.Indicates a tape counter.
6.Audio status of the current cassette tape.
22 EN
BEFORE YOU START
Main Menu
Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions of the unit.
Setup
1 |
General Setting |
2 |
Timer Programming |
3 |
Title List |
4 |
Disc Edit |
5 |
CD Playback Mode |
1.General Setting:
To go to general setting menu.
2.Timer Programming:
To program a timer recording.
3.Title List:
To call up the title list.
4.Disc Edit:
To set up the DVD setting.
5.CD Playback Mode:
To set up the CD playback setting.
•“CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 files is inserted into the unit.
General Setting Menu
1 |
General Setting |
8 |
2 |
Playback |
|
3 |
Display |
Parental Lock |
4 |
Video |
Disc Audio |
Recording |
Disc Menu Language |
|
5 |
Clock |
Audio Language |
62 |
Channel |
Subtitle Language |
Reset All |
Angle Icon |
|
73 |
|
Still Mode |
1.Playback:
To set up the unit to play back discs as you prefer.
2.Display:
To set up the OSD screen as you prefer.
3.Video:
To set up the video setting.
4.Recording:
To set up the unit to record to discs as you prefer.
5.Clock:
To set up the clock of the unit as you need.
6.Channel:
To adjust the channel setting of the unit as you prefer.
7.Reset All:
To reset the setting to the factory default.
8. :DVD
:VCR
Indicates the available mode for the selected function.
Disc Edit / CD Playback Mode
<Disc Edit menu (DVD+RW)>
|
|
|
|
|
|
Disc Edit |
|
||
|
|
|
|
|
|
|
|||
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
Edit Disc Name |
|
|
|
|
|
|
|
|
Erase Disc |
|
|
|
||
3 |
|
|
|
|
Make Edits Compatible |
|
|
||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
4 |
|
|
|
|
Disc Protect OFF ON |
|
|
||
|
|
|
|
|
|
|
|
|
|
<Disc Edit menu (DVD-RW)>
Disc Edit
1
Edit Disc Name 2 Erase Disc
3 Finalize
Disc Protect OFF ON
4
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1
Edit Disc Name 23 Finalize
43 Disc Protect OFFON
<CD Playback Mode menu>
CD Playback Mode
15
Random Play 26 Program Play
73 PBC (Video CD only)
1.Edit Disc Name:
Allows you to rename the disc.
2.Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3.Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4.Disc Protect :
Allows you to protect a disc from accidental editing or recording.
5.Random Play:
Allows you to activate the random playback feature.
6.Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7.PBC (Video CD only):
Allows you to select images or information on the menu screen by activating PBC (playback control) function.
EN 23
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
BEFORE YOU START
Switching DVD / VCR Mode
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate.
DVD mode |
|
VCR mode |
|
Press [SOURCE] on the front panel, or press [DVD] on the |
Press [SOURCE] on the front panel, or press [VCR] on the |
||
remote control. |
remote control. |
||
(Verify that the DVD indicator is lit.) |
(Verify that the VCR indicator is lit.) |
DVD indicator
SOURCE button
VCR indicator
|
|
|
STANDBY-ON |
SOURCE |
DTV/TV |
DISPLAY OPEN/CLOSE |
|
|
|
|
A |
.@/: |
ABC |
DEF |
|
1 |
2 |
|
3 |
GHI |
JKL |
MNO |
|
4 |
5 |
|
6 |
PQRS |
TUV |
WXYZ |
|
7 |
8 |
|
9 |
. |
SPACE |
CLEAR |
|
0 |
|
|
|
DISC MENU |
|
SETUP |
|
|
o |
|
|
s |
OK |
B |
|
TITLE |
|
|
RETURN |
|
p |
|
|
j |
B |
i |
|
F |
h |
g |
C |
|
CHANNEL |
|
|
-- |
|
+ |
|
REC MODE |
VCR |
DVD |
TIMER |
REC |
|
|
AUDIO |
I |
|
|
|
|
|
TIMER |
|
CM SKIP |
D.DUBBING |
SET |
RAPID PLAY |
VCR button
DVD button
SEARCH
Note
• You cannot switch the mode while in the timer-standby mode.
How to Insert a Disc / Cassette Tape
How to Insert a Disc
1)Press [OPEN/CLOSE A] to open the disc tray.
2)Place the disc on the disc tray with its label side facing up.
Align the disc to the disc tray guide.
3) Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load the disc.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit.
How to Insert a Cassette Tape
1) Insert a cassette tape as illustrated below.
4 HEAD HI-FI STEREO
Cassette compartment
•Insert from the flap side first with the window side facing up.
To eject the cassette tape:
Press [STOP/EJECT C A] on the front panel or press [OPEN/CLOSE A] on the remote control.
24 EN
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
1Follow the procedure in “Finding the Viewing Channel on Your TV” on page 20 to display the “Initial Setup” menu.
2Use [K / L] to select your desired language, then press [OK].Initial Setup
OSD Language
English
Français
Español
3Use [K / L] to select the type of broadcasting signal, then press [OK].
Initial Setup
Channel Preset
Make sure the antenna is connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and digital TV are automatically scanned and memorized. Only the receivable channels in the area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and digital CATV are automatically scanned and memorized.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Auto Presetting Now |
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
Press [OK] to activate “Clock Setting”. |
|||||||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
||
|
|
Initial Setup |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
Clock Setting |
|
|
|
|
|
|
|
|
|
- - - / - - / - - - - ( - - - ) |
|
|
|
|
|
|
|
|
- - : - - - - |
|
|
|
|
|
|
|
|
|
|
|
|
|
5Proceed to step 5 in “Manual Clock Setting” on page 30.
•If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” on page 29.
EN 25
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures.
Auto Channel Scan
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
Press [RETURN] or [SETUP] to cancel.
5When scanning is over, press [SETUP] to exit.
To cycle through only the memorized channels, use
[CHANNEL/ ].
To select a channel directly (including the ones not memorized), use [the Number buttons].
Note
•If the auto channel preset is canceled during presetting, some channels not yet preset may not be received.
•You cannot change the channel when either VCR or DVD is in any recording mode (basic recording, onetouch timer recording or timer recording).
26 EN
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels.
Adding channel is only available for the analog TV channels.
Make sure
•You perform “Auto Channel Scan” before adding or deleting the channels.
STANDBY-ON
SOURCE DTV/TV DISPLAY OPEN/CLOSE
|
|
|
A |
.@/: |
|
ABC |
DEF |
1 |
|
2 |
3 |
GHI |
|
JKL |
MNO |
4 |
|
5 |
6 |
PQRS |
|
TUV |
WXYZ |
7 |
|
8 |
9 |
. |
|
SPACE |
CLEAR |
|
0 |
|
|
DISC MENU |
|
|
SETUP |
|
|
o |
|
s |
|
OK |
B |
TITLE |
|
|
RETURN |
|
|
p |
|
j |
|
B |
i |
F |
h |
g |
C |
CHANNEL
--+
REC MODE VCR |
DVD |
TIMER |
REC |
|
AUDIO |
I |
|
|
|
TIMER |
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
SEARCH |
|
|
1Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels.
2Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].
“General Setting” menu will appear.
3 Use [K / L] to select “Channel”, then press [OK].
“Channel” menu will appear.
4Use [K / L] to select “Manual Channel
Preset”, then press [OK].
Auto Channel Preset
Manual Channel Preset
TV Audio Select
• If you are adding or deleting analog TV/CATV channels, go to ANALOG to continue.
• If you are deleting digital TV/CATV channels, go
to |
DIGITAL |
to continue. |
Instructions continue on the next page.
EN 27
Others Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Español
CHANNEL SETTING
ANALOG
5Select the channel number to add or delete.
•Use [CHANNEL/ ] to cycle through only the memorized channels.
•Use [{ / B] to cycle through all the channels including the ones not memorized.
•Use [the Number buttons] to select a channel directly.
•When a memorized channel is selected, “Add” is checked and highlighted as a default.
•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.
6Use [K / L] to select “Add” or
“Delete”, then press [OK].
Manual Channel Preset
CH 2
Add
Delete
Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.
7 Press [SETUP] to exit.
DIGITAL
5Select the channel number to delete.
•Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)
•Use [CHANNEL/ ] to cycle through only the memorized channels.
•You cannot use [{ / B] for the digital TV channel selection.
•Use [the Number buttons] to select a channel directly.
•When a memorized channel is selected, “Add” is checked and highlighted as a default.
•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.
6Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete.
•If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.
Manual Channel Preset
DTV 2 (CH - - - )
Add
Delete
Your setting will be activated.
WARNING:
•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.
7 Press [SETUP] to exit.
28 EN
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 30.
Auto Clock Setting
This unit can set the time and date automatically by |
|
Press [SETUP] and use [K / L] to |
|||
referring to a PBS station. |
|
|
|
select “General Setting”, then press |
|
Make sure |
|
|
|
1 [OK]. |
|
• The antenna/cable TV connections are correct. |
|||||
• Channels are set. (Refer to page 26.) |
2 |
“General Setting” menu will appear. |
|||
|
|||||
• If this unit is connected to a cable/satellite box, |
Use [K / L] to select “Clock”, then |
||||
select the local PBS station on them to set the clock |
|||||
automatically. |
|
|
|
press [OK]. |
|
|
|
|
|
“Clock” menu will appear. |
|
|
|
|
STANDBY-ON |
Use [K / L] to select “Auto Clock |
|
|
|
|
|
3 |
|
SOURCE |
DTV/TV |
DISPLAY OPEN/CLOSE |
Setting”, then press [OK]. |
||
|
|||||
|
|
|
A |
|
|
.@/: |
|
ABC |
DEF |
Use [K / L] to select “Auto”, then |
|
1 |
|
2 |
3 |
|
|
GHI |
|
JKL |
MNO |
|
press [OK]. |
4 |
|
5 |
6 |
|
|
|
4 Auto Clock Setting |
||||
PQRS |
|
TUV |
WXYZ |
||
7 |
|
8 |
9 |
|
OFF |
. |
SPACE |
CLEAR |
|
Auto |
|
|
0 |
|
5 |
Manual |
|
DISC MENU |
|
SETUP |
|
||
|
|
o |
|
Press [SETUP] to exit. |
|
|
|
|
|
||
s |
|
OK |
B |
|
|
TITLE |
|
p |
RETURN |
Press [STANDBY-ON y] to turn off |
|
|
|
|
|
|
|
j |
|
B |
i |
|
the unit. |
|
|
|
|
|
|
|
|
|
|
|
This unit will search for the time only when the |
F |
h |
g |
C |
6 power is off. Leave it off for several minutes to |
|
|
CHANNEL |
|
|
give this unit time to set the clock. |
|
|
-- |
|
+ |
|
|
|
|
|
|
REC MODE VCR |
DVD |
TIMER |
|
REC |
|
AUDIO |
|
I |
|
|
If the unit chooses an incorrect PBS channel, set the PBS |
|
TIMER |
|
|
CM SKIP D.DUBBING |
SET |
RAPID PLAY |
channel manually by following the steps below. |
|
|
|
|
SEARCH |
|
|
|
Functions VCR Setup Function Editing Playback Recording Setup Basic Connections Introduction
Note
•The clock may set itself automatically after you connect the antenna/cable signal and plug in the power cord.
•Only the analog PBS channel signal is effective for auto clock setting.
•The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off.
Others
Español
29
SETTING THE CLOCK
|
|
|
|
|
|
|
Daylight Saving Time |
||||
|
Press [SETUP] and use [K / L] to |
When “Daylight Saving Time” is “ON”, the unit clock will |
|||||||||
|
automatically adjust the time in order to fit the daylight |
||||||||||
|
select “General Setting”, then press |
||||||||||
|
saving time. |
||||||||||
|
[OK]. |
“ON (MAR - NOV)” has been selected as the default. |
|||||||||
|
|
|
|
|
|
|
Press [SETUP] and use [K / L] to |
||||
|
Use [K / L] to select “Clock”, then |
|
|||||||||
|
|
select “General Setting”, then press |
|||||||||
|
press [OK]. |
|
|||||||||
2 |
|
1 [OK]. |
|||||||||
|
|
|
|
|
|
||||||
|
|
|
|
|
|
“General Setting” menu will appear. |
|||||
3 |
Use [K / L] to select “Clock Setting”, |
|
|
|
|
|
|
||||
|
Use [K / L] to select “Clock”, then |
||||||||||
then press [OK]. |
|
||||||||||
|
press [OK]. |
||||||||||
|
|
|
|
|
|
||||||
Use [K / L] to select calendar or time, |
|
2 “Clock” menu will appear. |
|||||||||
|
|
Use [K / L] to select “Daylight Saving |
|||||||||
4 |
|
|
|
|
|
||||||
then press [OK]. |
|
|
3 Time”, then press [OK]. |
||||||||
|
|
|
|
||||||||
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
Use [K / L] to select “ON (MAR - |
||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
NOV)”, “ON (APR - OCT)” or “OFF”, |
||||
|
|
|
|
|
|
|
|||||
|
Use [{ / B] to select an item to set, |
|
4 |
then press [OK]. |
|
||||||
|
and use [K / L] to select the contents |
|
|
||||||||
5 to suit your preference, then press |
|
|
Daylight Saving Time |
|
|||||||
|
|
|
ON (MAR - NOV) |
|
|
||||||
|
[OK] when you finish setting all the |
|
|
|
|
|
|
||||
|
|
|
|
ON (APR - OCT) |
|
||||||
|
contents. |
|
|
|
OFF |
|
|||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
ON (MAR - NOV): |
||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
Move forward one hour on the second Sunday in |
||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
March and move back one hour on the first |
||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
Sunday in November. |
||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
ON (APR - OCT): |
||||
|
The clock start counting when you press [OK]. |
|
Move forward one hour on the first Sunday in |
||||||||
|
|
|
|
|
|
|
April and move back one hour on the last |
||||
|
|
|
|
|
|
|
Sunday in October. |
5 Press [SETUP] to exit.
30 EN