M-Audio AIR61 User Manual

0 (0)

USER MANUAL

ENGLISH ( 2 – 12 )

MANUAL DEL USUARIO

ESPAÑOL ( 13 – 23 )

MANUEL D'UTILISATION

FRANÇAIS ( 24 – 34 )

GUIDA PER L'USO

ITALIANO ( 35 – 45 )

BENUTZERHANDBUCH

DEUTSCH ( 46 – 56 )

USER GUIDE (ENGLISH)

Box Contents

Axiom AIR 61

USB cable

Pro Tools Express DVD

User Guide

iLok 2

Safety & Warranty Manual

Support

For complete system requirements, compatibility information, and product registration, visit the support section of the M-Audio website: m-audio.com/support.

Important!

Essential Downloads

Windows users: Visit m-audio.com/axiomair61 to download the additional drivers for your Axiom AIR to enable HyperControl to work properly (see below). These drivers also let you use your Axiom AIR with more than one application simultaneously and/or in conjunction with other class-compliant USB devices with audio capabilities.

Mac users: You do not need to install any Mac-specific drivers.

HyperControl Installations

Rather than assigning parameters one by one, activating Axiom AIR's HyperControl Mode automatically maps its controls to many of the most frequently used digital audio workstation (DAW) features and settings. When used with a supported DAW, you can control the transport, mixing controls (faders and panning) and virtual instrument or signal processing plug-in parameters. You can also switch between HyperControl and custom MIDI operation on the fly to match your particular needs.

To enable HyperControl with your Axiom AIR, you need to install some additional software, including the Hypercontrol "personality" for your specific DAW. Visit m-audio.com/hypercontrol for a current list of DAWs that support HyperControl.

Also, see the HyperControl section of this manual for more information.

Additional Installations

We also highly recommend installing the following software applications:

Pro Tools Express: We've included Pro Tools Express with your Axiom AIR so you can get started making music with a professional DAW right out of the box:

1.Insert the DVD into your computer's DVD drive. Double-click the DVD to view its contents. Locate, open, and follow the installation instructions (PDF).

2.After activating Pro Tools Express and receiving the license, connect the included iLok 2 to a USB port on your computer and transfer the license to it.

Connect the iLok 2 to your computer whenever you want to use Pro Tools Express. The software will launch once it verifies the license on the iLok 2. (Visit avid.com to check for any available software updates.)

Ignite (airmusictech.com/download_ignite): We recommend downloading Ignite, a music creation tool designed by AIR Music Technology to be easiest way to capture, build, and share musical ideas. Ignite works well on its own or as a writing companion to the production capabilities of your DAW. Axiom AIR's controls are fully integrated with Ignite, providing easy control of common tasks like preset selection, parameter control, and interface navigation. See the Controlling Ignite section of this manual for more information.

Quick Start

1.Use the included USB cable to connect your Axiom AIR to an available USB port on your computer. (If you are connecting to a USB hub, ensure that it is a powered hub.) When connected properly, and when your computer is on, power Axiom AIR on using the power switch on its rear panel. Its buttons, fader buttons, knobs, trigger pads, and LCD will illuminate.

Windows users: Visit m-audio.com/axiomair61 and download the Axiom AIR drivers to enable HyperControl to work properly. (Please see the

Essential Downloads section above.)

2.Open your digital audio workstation (DAW).

3.You may need to open your DAW's Preferences and select your Axiom AIR as the control surface or device. See your software's documentation for more information.

2

M-Audio AIR61 User Manual

Setup Scenario 1

Computer

Sustain Pedal

Expression Pedal

USB MIDI IN MIDI OUT R L R L VOL

USB Audio

Monitors

Interface

 

Setup Scenario 2

Computer

Headphones

Setup Scenario 3

Monitors

Computer

External

Rack Synth

USB Mixer

3

General Overview

3

2

4

5

1

This is a broad overview of Axiom AIR 61's controls, divided into sections:

1.Performance Controls: The keyboard is pressureand velocity-sensitive, allowing for a comfortable and natural-feeling performance. Access the entire 88-note range by using the octave buttons, and use the pitch bend wheel and modulation wheel to give your sound even more expressiveness.

2.Main Control Panel: Use this panel and LCD to navigate Axiom AIR's settings. You can edit and identify what's assigned to Axiom AIR's controls as well as store and load your settings as "memory locations." The transport buttons control standard transport functions in your DAW, as well.

3.Knob Controls: Use the knobs to mix and control plug-in parameters. The three Mode buttons to the left of the knobs determine how this section functions.

4.Fader Controls: Use the faders to mix and control plug-in parameters. The buttons below the faders let you mute, solo, and record-arm tracks. The three Mode buttons to the left of the faders and fader buttons determine how this section functions.

5.Trigger Pad Controls: Use these pressureand velocity-sensitive trigger pads to create drum parts, trigger samples, or control certain software features. The three Mode buttons on the right of the pads determine how this section functions.

Controls & Connections

Top Panel

 

4

8

5

7

 

 

 

 

 

 

 

6

 

3

3

 

 

 

2

2

 

1

 

1.Keyboard: This 61-note keyboard is velocityand aftertouch-sensitive and, in conjunction with the Octave buttons, can control a ten-octave range. You can also use the keys with labels above them (in the keyboard's lower and upper registers) to access extended programming functions when your Axiom AIR is in Edit Mode.

2.Pitch Bend and Modulation Wheels: These controls let you bend pitch and trigger parameter modulation when controlling a MIDI instrument.

3.Octave/Transpose Buttons ( – / + ): By default, these buttons shift the keyboard up or down one octave at a time, extending its playable range. The "+" shifts it upward (e.g., Note F3 becomes F4), while the "–" button shifts it downward (e.g., Note F3 becomes F2). Press both "–" and "+" buttons simultaneously to switch between this octave function or the transpose function. When transposing, these buttons shift keyboard up or down one half-step at a time, so you can play in a different key. The buttons' lights change color with each press to indicate how far you are transposed. You can also view the transposition in the LCD.

4

4.Knobs: You can use these eight knobs to send standard MIDI messages or to take control of mixing or plug-in parameters in HyperControl Mode, depending on the setting of the adjacent Mode buttons.

MIDI Mode (MIDI Bank button): The knobs will send MIDI messages as assigned or according to the current preset. Press the MIDI Bank button (next to the knobs) repeatedly to switch between three banks of assignments.

HyperControl Mix Mode (Mix button): The knobs will control common mixing functions.

HyperControl Inst/FX Mode (Inst/FX button): The knobs will control useful parameters in the currently selected instrument or effects plug-in.

5.Faders: Axiom AIR has nine faders (eight track faders plus a master fader). Use these controls to send standard MIDI messages or to control mixing or plug-in parameters in HyperControl Mode, depending on the setting of the adjacent Mode buttons.

MIDI Mode (MIDI Bank button): The faders will send MIDI messages as assigned or according to the current preset. Press the MIDI Bank button (next to the faders) repeatedly to switch between three banks of assignments.

HyperControl Mix Mode (Mix button): The faders will control common mixing functions.

HyperControl Inst/FX Mode (Inst/FX button): The faders will control useful parameters in the currently selected instrument or effects plug-in.

6.Fader Buttons: Axiom AIR has nine fader buttons (eight track fader buttons plus a master fader button). Use these controls to send standard MIDI messages or to control mixing or plug-in parameters in HyperControl Mode, depending on the setting of the adjacent Mode buttons and Select Track button to the left.

MIDI Mode (MIDI Bank button): The fader buttons will send MIDI messages as assigned or according to the current preset. Press the MIDI Bank button (next to the faders) repeatedly to switch between three banks of assignments.

HyperControl Mix Mode (Mix button) and HyperControl Inst/FX Mode (Inst/FX button): The fader buttons will have different functions for each track or parameter, depending on your DAW's HyperControl personality and on the setting of the adjacent Select Track button. Press it (multiple times, if necessary) to cycle through the different buttons' different modes.

7.Trigger Pads: These velocityand aftertouch-sensitive trigger pads are perfect for composing drum parts or triggering samples in a live setting. Use the Pad Bank button to switch between three assignable banks of MIDI notes: the trigger pads will be lit red in Bank 1, green in Bank 2, and amber in Bank 3. The trigger pads also control certain software features in HyperControl Mode.

MIDI Mode (MIDI Bank button): The trigger pads will send MIDI note and pressurebased controller data or other more advanced MIDI messages, as assigned or according to the current preset.

Roll Mode (Roll button): Strike and hold a trigger pad to create a "roll," a rhythmic string of repeated notes. You can control the rhythm and rate of these notes with the Pad Roll parameters. Double-press this button to "latch" Roll Mode, so it stays on. Press it once again to unlatch it.

HyperControl Mode ( button): The trigger pads will control various functions, depending on your DAW.

5

8.

Main Control Panel:

 

 

 

 

A. LCD: This screen displays useful information, such as

 

 

 

 

the current assignment and setting of the most

B

 

D

 

recently moved physical control.

 

 

B. Edit Button: This button puts Axiom AIR in Edit Mode,

 

A

 

 

allowing you to use its keyboard's special functions to

C

 

E

 

create or edit MIDI control assignments, global

 

 

 

 

settings, and utility functions.

 

 

 

 

C. Tempo Button: This button flashes in time with the

 

 

 

 

tempo setting of the trigger pad roll function. Tap this

 

G

 

 

button at 1/4-note intervals to set the tempo. Press

 

 

 

 

and hold this button for over two seconds to set the

 

 

 

 

tempo manually, using Knob 8 or the up and down

 

 

 

 

Directional buttons. Press the center Directional button

 

F F F

F F F

to save the setting.

Note: When Axiom AIR receives incoming MIDI timecode (MTC) messages, it will automatically synchronize with the external MIDI clock. These messages can be received only over Axiom AIR's USB port.

D.Identify Button: Hold down this button and move a control to identify its assignment, which will appear in the LCD. This lets you identify what is assigned to that control without actually sending out any MIDI data. This is useful for reminding yourself of your assignments without changing your settings, disrupting your live performance, etc. You can double-press this button to "latch" it so it stays on. Press it once again to unlatch it.

E.Memory Button: This button lets you save and access Memory Locations for storing full MIDI configurations. See the Memory Locations section of this manual for more information.

F.Transport Controls: These buttons control standard transport functions in DAW software: loop, rewind, fast-forward, stop, play, and record. When a HyperControl-enabled DAW is running, these buttons automatically map to those functions (or their closest alternatives). You can also map these buttons to a variety of MIDI messages.

G.Directional Buttons: You can use these buttons for various navigational and parameter-setting functions, depending on the setting of the adjacent Mode buttons.

Inst/FX Mode (INST/FX button): The buttons will select the track and plug-in you want to control with the faders and knobs.

HyperControl Mode ( button): The buttons will have alternate, DAW-specific uses.

Track Select/Bank Mode (Track button): The buttons will select the desired track or bank of tracks to control in HyperControl Mode.

Rear Panel

1 2 3 4 5 6 7 8

1.Power Switch: Use this switch to power Axiom AIR on or off.

2.Power Input: Connect an optional power adapter here (9V DC, 3A, center-pin positive, sold separately). Alternatively, you can power Axiom AIR via the USB port of your connected computer.

3.USB Port: When Axiom AIR is connected to a computer via USB, this USB connection powers Axiom AIR and transmits MIDI data to and from the computer.

4.MIDI Input: Use a standard 5-pin MIDI cable to connect this input to the MIDI output of an external MIDI device.

5.MIDI Output: Use a standard 5-pin MIDI cable to connect this output to the MIDI input of an external MIDI device, allowing you to play the sounds in a MIDI sound module or a rack synth, for example.

6.Expression Pedal Input: Connect either a "switch"-type or standard expression pedal (sold separately) to this input to allow for expressive changes while performing. This input is assignable to different functions.

7.Sustain Pedal Input: Connect a momentary-contact sustain pedal (sold separately) to this input to allow you to sustain the currently playing notes without having to hold the keys down. This input is assignable to different functions.

Note: When you power on Axiom AIR, verify that your sustain pedal has the right "polarity" – that it sustains notes when pressed down. If your sustain pedal is working "in reverse," remove your foot from it, and power your Axiom AIR off then on again. (When powering on your Axiom AIR, it scans the sustain pedal as being in the raised/off position.)

8.Kensington® Security Slot: This connector is compatible with standard laptop-style Kensington security cables for theft protection.

6

Performance Settings

This section explains settings that change the functions of Axiom AIR's keyboard and trigger pads.

IMPORTANT: When this manual refers to a "key," this means a key on the keyboard with a label printed above it (e.g., "PAD Learn," "PAD Roll," etc.) as opposed to a button elsewhere on the product.

Trigger Pads

Pad Learn

You can easily assign sounds from the keyboard to the trigger pads by using the Pad Learn function. This can be useful if you want to use the trigger pads to send certain MIDI notes to trigger a sound in your virtual instrument.

To assign the MIDI note of a trigger pad:

1.Press the Edit button. It will flash red.

2.Press the PAD Learn key on the keyboard. Learn:C-2 will appear on the LCD.

3.Press a keyboard key to select the desired MIDI note.

4.If necessary, press the MIDI Bank button next to the trigger pads to select the pad bank containing the desired pad.

5.Press the desired trigger pad to assign the chosen note to the pad. The selected pad number will appear in the LCD. After a moment, Axiom AIR will automatically exit Edit Mode.

Pad Roll

When in Pad Roll Mode, striking and holding a trigger pad creates a "roll," a rhythmic string of repeated notes.

To activate Pad Roll Mode, do any one of the following:

Press and hold the Roll button. Release the button to deactivate Pad Roll Mode.

Double-press this button to "latch" Roll Mode, so it stays on. Press it once again to unlatch/deactivate Pad Roll Mode.

Press the Edit button, and then press the PAD Roll key on the keyboard.

To set the rhythm and duration of the Pad Roll:

1.Activate Pad Roll Mode (described above).

2.Use the fader buttons to set the rhythmic subdivision (1/4, 1/4T [triplet], etc.).

3.If you are not already in Edit Mode (from in Step 1), press the Edit button, and then press the Pad Roll key on the keyboard.

4.Use the left and right Directional buttons to decrease or increase (respectively) the "swing" of the roll.

5.Use the down and up Directional buttons to decrease or increase (respectively) the length of each note.

Parameter Assign

When you want more control flexibility than HyperControl Mode offers, or if you are using a DAW without an Axiom AIR HyperControl personality, you can set Axiom AIR's knobs, faders, buttons, and trigger pads to output a variety of MIDI messages: continuous controllers (CC), registered parameter numbers (RPNs), non-registered parameter numbers (NRPNs), or system exclusive (SysEx).

As an improvement over previous M-Audio Axiom Pro keyboards, each of the three controller sections (knobs, faders, and trigger pads) can switch independently between HyperControl Mode and MIDI Mode. So, for instance, you can use the faders to mix in HyperControl Mode while simultaneously using the trigger pads to play samples in MIDI Mode.

7

Assigning MIDI Messages to the Controls

Editing Axiom AIR's MIDI configuration all starts with the Edit button. Press it to enter Edit Mode. It will flash to indicate it is in Edit Mode. To exit Edit Mode, press it a second time.

To assign a specific MIDI message to a physical control:

1.Press the Edit button. It will flash red, and all controls

 

will stop sending messages.

When selecting Aftertouch in Edit Mode,

2.

Select the control to assign by moving or pressing it.

press a key that does NOT have a

 

The selected control's bank and control number will

secondary Edit Mode function (i.e., the

 

appear in the LCD.

keys without writing above them).

3.

Enter Parameter Assign Mode by pressing the

To exit Edit Mode and discard any new

 

Param Assign key. The MIDI message currently

settings, press the Cancel key on the

 

assigned to control will appear in the LCD.

keyboard or the Edit button.

4.

Select the desired MIDI message for this control by

For a complete list of available MIDI

 

using one of the methods described in the next

messages and sub-parameters, please

 

section, To choose a MIDI message to output.

see this manual's Appendix.

5.Press the center Directional button to save the new assignment.

To choose a MIDI Message to Output:

Directional buttons:

1.Select the type of MIDI message you want to output by using Knob 8 or the up and down Directional buttons.

2.Use the left and right Directional buttons to access sub-parameters for that MIDI message, if any. The sub-parameter name and its current value will appear in the LCD.

Note: When the LCD displays a "right" arrow () next to the parameter name, it means it has subparameters, which you can also edit. Use the left and right Directional buttons to access these subparameters.

3.Increase or decrease the displayed value by using the up and down Directional buttons.

4.Press the center Directional button to confirm your choice and return to the sub-parameter list.

Knobs:

1.Use Knob 8, the numerical keys on the keyboard, or the up and down Directional buttons to select

(1)the type of MIDI message you want to output, (2) the sub-parameter to edit, and (3) that subparameter's value.

2.Press the center Directional button to confirm your choice and return to the sub-parameter list.

Identifying Control Assignments

It can be helpful to see which hardware control is assigned to which software parameter.

To check the control assignment of a hardware control:

1.Press and hold the Identify button, or double-press it to "latch" it on. All control output from Axiom AIR will be temporarily halted, and the button will flash red.

2.Manipulate the control you want to identify. The assigned parameter and its current setting will appear on the LCD.

3.To go back to normal operation, release the Identify button or, if you latched it, press it once again.

Velocity Curves

The keyboard and trigger pads on Axiom AIR are velocity-sensitive; playing with more force results in a higher volume, while playing with less force results in a lower volume. This dynamic range gives your performance a more natural sound and feel. You can vary this sensitivity by selecting a velocity curve, tailoring the response to your particular playing style.

To select a velocity curve:

1.Press the Edit button. It will flash red.

2.Press the Vel Curve key on the keyboard. Key Velocity will appear on the LCD.

3.To switch between Key Velocity and Pad Velocity, press the Vel Curve key again or use the up and down Directional buttons. Press the center Directional button to edit it.

4.Use the numerical keys (0–9) to select the desired

velocity curve, and then press the Enter key on the keyboard. Alternatively, you can use the up and down Directional buttons and then press the center Directional button.

The velocity curve settings are described in the following chart:

IMPORTANT: Exiting Edit Mode or pressing the Cancel key on the keyboard will automatically save your changes.

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Keyboard

Trigger Pads

1

(Low): Low sensitivity

1

(Low): Low sensitivity

2

(Low Normal): Slightly more sensitive than Low

2

(Normal): Default sensitivity, linear

3

(Normal): Default sensitivity

3

(High): Highest sensitivity

4

(Normal High): Slightly more sensitive than Normal

4

(4 Steps): Velocity limited to four discrete values

5

(High): Highest exponential curve

5

(3 Steps): Velocity limited to three discrete values

6

(Linear): True to velocity

6

(2 Steps): Velocity limited to two discrete values

7

(Low Range): Velocity limited to lowest third of its range

7

(Low Range): Velocity limited to lowest third of its range

8

(Mid Range): Velocity limited to middle third of its range

8

(Mid Range): Velocity limited to middle third of its range

9

(High Range): Velocity limited to highest third of its range

9

(High Range): Velocity limited to highest third of its range

0

(Fixed): Set a fixed velocity value with the illuminated knob

0

(Fixed): Set a fixed velocity value with the illuminated knob

Drawbar Mode

This mode reverses the polarity of Axiom AIR's faders: the fader's lowest physical position sends the maximum value, and the fader's highest physical position sends the minimum value. This is useful for organ instrument plug-ins where the various parameters appear as organ drawbars; the farther down you pull a drawbar, the greater its volume.

To activate Fader Drawbar Mode:

1.Press the Edit button. It will flash red.

2.Press the Drawbar key on the keyboard. The LCD will show whether Fader Drawbar Mode is on or off.

3.Press the Drawbar key or use the up and down Directional buttons to activate/deactivate Fader Drawbar Mode.

4.Press the Enter key to save the new setting, or press Cancel or Edit to exit Edit Mode and discard any changes.

MIDI Settings

Global MIDI Channel

The "global" MIDI channel is the default MIDI channel over which Axiom AIR sends MIDI messages. Because this is a global setting, it applies across all memory locations, overridden only by custom channel selections for controls in MIDI Mode.

To set the global MIDI Channel:

 

1.

Press the Edit button. It will flash red.

 

2.

Press the MIDI Chan key on the keyboard. The currently selected channel will appear on the LCD.

3.

To select the desired channel, use the numerical keys

IMPORTANT: Exiting Edit Mode or

 

(0–9) to enter it or use Knob 8 or the up and down

 

Directional buttons to select it.

pressing the Cancel key on the

4.

Press the Enter key on the keyboard or center

keyboard will automatically save your

 

Directional button to save the new global MIDI channel

changes.

assignment.

Global MIDI Out

This is the default hardware MIDI output port over which Axiom AIR sends MIDI messages. Because this is a global setting, it applies across all memory locations, overridden only by custom channel selections for controls in MIDI Mode.

To set the global MIDI output port:

1.Press the Edit button. It will flash red.

2.Press the MIDI Out key on the keyboard. MIDI Out will appear on the LCD with the current setting:

USB: Sends MIDI over the USB port only.

Ext: Sends MIDI to the MIDI Output jack only.

USB+Ext: Sends MIDI to the USB port and MIDI Output jack.

3.Press the 1, 2, or 3 key or use Knob 8 or the up and

 

down Directional buttons to select the desired setting.

IMPORTANT: Exiting Edit Mode or

4.

Press the Enter key on the keyboard or center

pressing the Cancel key on the

 

Directional button to save the new global MIDI channel

keyboard will automatically save your

 

assignment.

changes.

9

MIDI Panic

When you trigger a MIDI Panic message, it sends an "All Notes Off" message on all channels and through all outputs. This is useful when a connected hardware or software synthesizer has a stuck Note On.

To send a MIDI Panic message:

1.Press the Edit button.

2.Press the MIDI Panic key on the keyboard. Axiom AIR will send an "All Notes Off" MIDI message, and All Notes Off will appear briefly on the display. Your Axiom AIR will automatically exit Edit Mode.

Memory Locations

Once you've made some MIDI control assignments to fit a specific device or task, you may want to save them to one of Axiom AIR's 128 memory locations for later use.

Storing

To store the current set of MIDI assignments to a memory location:

1.Press the Edit button. It will flash red.

2.Press the Memory button. Memory, and the currently loaded memory location name and number, will appear on the LCD.

3.Use the numerical keys (0–9), the up and down Directional buttons, or Knob 8 to enter the desired memory location slot (0-127).

4.Enter a name for the memory location. Use the left and right Directional buttons to select a letter to edit, and use Knob 4 to change the currently selected letter.

5.Press the Enter key on the keyboard to save the memory location. Saving… will appear on the LCD. When it is finished, Axiom AIR will automatically exit Edit Mode.

To recall a memory location:

1.Press the Memory button. It will illuminate green.

2.Use the up and down Directional buttons or Knob 8 to select a memory location from the list.

3.Press the center Directional button to load the selected memory location. Loading… will appear on the LCD. When it is finished, adjust a control to return the LCD to its normal state.

Backing Up & Loading

You can back up and load individual memory locations or all 128 locations of your Axiom AIR by using MIDI SysEx. Use a SysEx librarian application or simply record it to a MIDI track in your DAW and play it back when needed.

To backup one or all memory locations:

IMPORTANT!: When sending SysEx data, do not set the sending speed any higher than 3.05 KB/sec. Doing so will cause problems with the transfer.

1.Ensure that Axiom AIR is connected to the computer, is functioning correctly, and has the desired memory location loaded.

2.Ensure that a MIDI track in your DAW is recording (and set to receive MIDI from Axiom AIR), or that your SysEx librarian utility is ready to receive data.

3.Press the Edit button. It will flash red.

4.Press the up or down Directional buttons or MEM Backup key on the keyboard to switch between Backup? (backup current memory location) and Backup All? (backup all memory locations).

5.Press the center Directional button to start the backup. Sending… will appear on the LCD. The LCD will return to the main screen when the process is complete.

To load one or all memory locations from a MIDI backup:

1.Ensure that Axiom AIR is connected to the computer and functioning correctly.

2.Ensure that your DAW (with a MIDI track containing backup data) or SysEx librarian utility is set to transmit MIDI to your Axiom AIR (i.e., that your program's MIDI out port is set to the Axiom AIR HyperControl port).*

* Before loading SysEx data from a MIDI track in your DAW, ensure that the transport or playhead is positioned before the desired data in the timeline.

3.Press Play on your DAW or enable SysEx transmission on your SysEx librarian application. Rec SysEx… will appear on the LCD. The LCD will return to the main screen when the process is complete.

IMPORTANT:

When loading all memory locations, the memory locations stored in the backup will overwrite the corresponding ones in Axiom AIR. Axiom AIR will retain all other memory locations.

When loading a single memory location, it will be loaded to the "Edit Mode buffer" only, not to an actual memory location. Store it to a memory location by following the instructions in the Storing section above.

10

HyperControl

Rather than assigning parameters one by one, activating Axiom AIR's HyperControl Mode automatically maps its controls to many of the most frequently used DAW features. This section is a general outline of HyperControl Mode's features. Keep in mind that features, control behaviors, and workflows differ between DAWs.

Please note that your specific DAW must have an Axiom AIR HyperControl profile to use this feature. To see if HyperControl supports your DAW, and how HyperControl works with it, visit m-audio.com/hypercontrol. There, you can download and refer to the HyperControl user guide for your DAW.

Getting Started

Depending on the brand and version of your software, you may need to install HyperControl support software. Follow the setup instructions in the HyperControl User Guide for your specific DAW, available at m-audio.com/hypercontrol.

After setting up HyperControl, test the transport controls to ensure they are working properly (see next section).

Transport Controls

All transport controls should respond like their counterparts in your DAW software (Play, Record, etc.).

To test the transport controls:

1.Connect Axiom AIR to a free USB port on your computer and power it on.

2.Launch your DAW and open a project file.

3.Press Axiom AIR's Play button, and then press its Stop button. If the DAW transport responds to both commands, HyperControl is working properly.

HyperControl Mix Mode

Using hardware controls for software functions can be very handy when mixing. HyperControl makes this easy. After you install your DAW's HyperControl "personality," you can enter HyperControl Mix Mode, which will automatically map various useful software parameters to Axiom AIR's controls.

Press the HyperControl Mix Mode button (Mix ) next to the faders (and fader buttons) or knobs to put that set of controls in HyperControl Mix Mode. Refer to your DAW's HyperControl user guide to see which parameter is assigned to each control.

HyperControl Inst/FX Mode

Plug-In Parameters (Faders, Fader Buttons, and Knobs)

Axiom AIR's faders and knobs can also control parameters within a plug-in instrument or effect.

To select a plug-in instrument or effect, press the HyperControl Inst/FX button (Inst/FX ) under the LCD.

To control plug-in parameters with the knobs or faders, press the HyperControl Inst/FX button (Inst/FX ) next to the desired bank of controls (faders or knobs). That bank of controls will enter HyperControl Inst/FX Mode. Use the controls to adjust the parameters. Refer to your DAW's HyperControl user guide to see which parameter is assigned to each control.

11

Other Controls

Directional Buttons

The Directional buttons can be used to control certain supported software features. Press the HyperControl button next to the Directional buttons to enable this function.

Trigger Pads

The trigger pads can be used to trigger drum or instrument sounds mapped by your software, but they have additional functions in HyperControl Mode (depending on your software's specific implementation of HyperControl). Press the HyperControl button next to the trigger pads to enable this function.

Identifying Control Assignments

Whether you're in HyperControl Mode or using your own control assignments, it can be helpful to see which hardware control is assigned to which software parameter.

To check the control assignment of a hardware control:

1.Press and hold the Identify button, or double-press it to "latch" it on. All control output from Axiom AIR will be temporarily halted, and the button will flash red.

2.Manipulate the control you want to identify. The assigned parameter and its current setting will appear on the LCD.

3.To go back to normal operation, release the Identify button or, if you latched it, press it once again.

Controlling Ignite

Ignite, included with your Axiom AIR, is a creative tool designed for rapid and fluid capture, refinement, and sharing of musical ideas. You can use it on its own or as a counterpart to your favorite DAW.

To download Ignite, visit airmusictech.com/download_ignite.

For more in-depth information on Ignite, please see the Ignite documentation.

Axiom AIR keyboards come pre-configured to control Ignite through HyperControl. When you launch Ignite with your Axiom AIR connected to the computer, you can use Axiom AIR's controls in the following ways:

Transport Controls

Press the HyperControl Mix Mode button ( button) on the main control panel, and then use the transport buttons to control those transport functions in Ignite.

Navigation

Use the Directional buttons to navigate through Ignite's tabs and sub-menus, depending on the current control focus.

Instruments

Refer to your Ignite's HyperControl user guide (at m-audio.com/hypercontrol) to see which parameter is assigned to each control.

12

GUÍA DEL USUARIO (ESPAÑOL)

Contenido de la caja

Axiom AIR 61

Cable USB

DVD de Pro Tools Express

Guía del usuario

iLok 2

Manual sobre la seguridad y garantía

Soporte

Para obtener información sobre los requisitos completos de sistema, la compatibilidad y el registro del producto, visite la sección de soporte del sitio web de M-Audio: m-audio.com/support.

¡Importante!

Descargas esenciales

Usuarios de Windows: Visite m-audio.com/axiomair61 para bajar los drivers adicionales para su Axiom AIR a fin de habilitar el funcionamiento correcto de HyperControl (consulte abajo). Estos drivers también le permiten usar su Axiom AIR con más de una aplicación simultáneamente y/o en conjunto con otros dispositivos USB compatibles con la clase y con capacidades de audio.

Usuarios de Mac: No es necesario instalar ningún driver específico para Mac.

Instalaciones de HyperControl

En lugar de asignar los parámetros uno por uno, al activarse el modo HyperControl de Axiom AIR, se mapean automáticamente sus controles a muchas de las características y ajustes de uso más frecuente de la estación de trabajo de audio digital (DAW). Cuando lo usa con una DAW compatible, es posible controlar el transporte, los controles de mezcla (faders y balanceo) y los parámetros de plug-in de procesamiento de señales o instrumentos virtuales. Además, es posible conmutar entre HyperControl y la operación MIDI personalizada sobre la marcha, a fin de satisfacer sus necesidades particulares.

Para habilitar HyperControl con su Axiom AIR, es necesario instalar software adicional, incluida la "personalidad" de Hypercontrol correspondiente a su DAW específica. Para obtener una lista de DAW compatibles con HyperControl, visite m-audio.com/hypercontrol.

Para más información, consulte también la sección HyperControl de este manual.

Instalaciones adicionales

También recomendamos especialmente instalar las siguientes aplicaciones de software:

Pro Tools Express: Hemos incluido Pro Tools Express con su Axiom AIR, de modo que puede comenzar a hacer música con una DAW profesional en cuanto abra la caja:

1.Inserte el DVD en el lector de DVD-ROM de la computadora. Haga doble clic en el DVD para ver su contenido. Localice, abra y siga las instrucciones de instalación (PDF).

2.Después de activar Pro Tools Express y recibir la licencia, conecte el iLok 2 incluido a un puerto USB de su computadora y transfiera la licencia al mismo.

Conecte el iLok 2 a su computadora toda vez que desee usar Pro Tools Express. El software se abre una vez que se verifica la licencia en el iLok 2. (Visite avid.com para verificar las posibles actualizaciones del software disponibles.)

Ignite (airmusictech.com/download_ignite): Recomendamos bajar Ignite, una herramienta de creación musical diseñada por Air Music Technology para ser la manera más fácil de capturar, construir y compartir ideas musicales. Ignite funciona bien por sí mismo o como complemento de redacción de las capacidades de producción de su DAW. Los controles del Axiom AIR están totalmente integrados con Ignite, a fin de brindar un fácil control de las tareas comunes como selección de presets, control de parámetros y navegación de interfaces. Para más información, consulte la sección Cómo controlar Ignite de este manual.

Inicio rápido

1.

Use el cable USB incluido para conectar su Axiom

Usuarios de Windows: Visite m-audio.com/axiomair61 y

 

AIR a un puerto USB disponible en la computadora.

 

(Si se conecta a un concentrador (hub) USB,

baje los drivers de Axiom AIR a fin de habilitar

 

asegúrese de que sea un concentrador alimentado.)

HyperControl para que funcione correctamente. (Consulte

 

Cuando esté conectado correctamente y su

la sección Descargas esenciales más arriba.)

computadora esté encendida, encienda el Axiom AIR

utilizando el interruptor de encendido del panel trasero. Se encenderán sus botones de faders, perillas, pads de disparo y pantalla LCD.

2.Abra su estación de trabajo de audio digital (DAW).

3.Es posible que deba abrir Preferences (Preferencias) de su DAW y seleccionar su Axiom AIR como superficie o dispositivo de control. Para más información, consulte la documentación de su software.

13

Escenario de instalación 1

 

Pedal de

 

sostenido

Computadora

Pedal de expresión

USB MIDI IN MIDI OUT R L R L VOL

 

Interfaz de

Monitores

 

audio USB

 

Escenario de instalación 2

Computadora

Auriculares

Escenario de instalación 3

Computadora Monitores

Rack de sincronismo externo

Mezclador

USB

14

Vista general

3

2

4

5

1

Ésta es una vista general de los controles del Axiom AIR 61, divididos en secciones:

1.Controles de interpretación: El teclado es sensible a la presión y la velocidad, permitiendo una interpretación cómoda y con sensación natural. Acceda a la gama completa de 88 notas usando los botones de octava y la rueda de inflexión de pitch y modulación para darle aún más expresividad a su sonido.

2.Panel de control principal: Use este panel y la pantalla LCD para navegar por los parámetros de Axiom AIR. Puede editar e identificar lo que se asigna a los controles de Axiom AIR, como también memorizar y cargar sus ajustes como "posiciones de memoria". Asimismo, los botones de transporte controlan las funciones de transporte estándar de su DAW.

3.Perillas de control: Use las perillas para mezclar y controlar los parámetros de plug-in. Los tres botones de modo ubicados a la izquierda de las perillas determinan la manera en que funciona esta sección.

4.Controles de faders: Use los faders para mezclar y controlar los parámetros de plug-in. Los botones que están debajo de los faders le permiten silenciar, producir solos o armar las pistas para grabación. Los tres botones de modo ubicados a la izquierda de los faders y los botones de fader determinan la manera en que funciona esta sección.

5.Controles de los pads de disparo: Use estos pads de disparo sensibles a la presión y la velocidad para crear partes de tambores, disparar muestras o controlar ciertas características del software. Los tres botones de modo ubicados a la derecha de los pads determinan la manera en que funciona esta sección.

Controles y conexiones

Panel superior

 

4

8

5

7

 

 

 

 

 

 

 

6

 

3

3

 

 

 

2

2

 

1

 

1.Teclado: Este teclado de 61 notas es sensible a la velocidad y a la post-pulsación y, en conjunto con los botones OCTAVE (Octava) puede controlar un rango de diez octavas. También es posible usar las teclas que tienen rótulos encima de ellas (en los registros inferior y superior del teclado) para acceder a funciones de programación extendidas cuando el Axiom AIR está en modo Edit (Edición).

2.Ruedas PITCH BEND (Inflexión de pitch) y MODULATION (Modulación): Estos controles le permiten realizar la inflexión del tono y disparar la modulación de parámetros cuando controla un instrumento MIDI.

3.Botones de octava/transposición ( – / + ): Por defecto, estos botones desplazan el teclado una octava hacia arriba o abajo por vez, extendiendo su gama de interpretación. El "+" la desplaza hacia arriba (por ejemplo, la nota F3 (Fa3) pasa a ser F4 (Fa4)), mientras que el botón "–" la desplaza hacia abajo (por ejemplo, la nota F3 (Fa3) pasa a ser F2 (Fa2)). Pulse ambos botones "–" y "+" simultáneamente entre esta función de octava o la función de transposición. Al realizar la transposición, con estos botones se desplaza el teclado hacia arriba o abajo de a un medio paso por vez, de modo que usted puede tocar en una tonalidad diferente. Las luces de los botones cambian de color con cada pulsación para indicar cuán lejos se transpuso. También puede ver la transposición en la pantalla LCD.

15

4.Perillas: Puede usar estas ocho perillas para enviar mensajes MIDI estándar o tomar control de los parámetros de mezcla o plug-in en modo HyperControl, en función de la configuración de los botones de modo adyacentes.

Modo MIDI (botón MIDI BANK): Las perillas envían mensajes MIDI según estén asignadas o de acuerdo al preset actual. Pulse repetidamente el botón MIDI BANK (Banco MIDI) (contiguo a las perillas) para cambiar entre tres bancos de asignaciones.

Modo de mezcla HyperControl (Botón MIX ): Las perillas controlan las funciones de mezcla comunes:

Modo de instrumentos y efectos HyperControl (Botón INST/FX ): Las perillas controlan parámetros útiles del plug-in de instrumentos o efectos seleccionado en ese momento.

5.Faders: Axiom AIR tiene nueve faders (ocho faders de pista más un fader maestro). Use estos controles para enviar mensajes MIDI estándar o controlar de los parámetros de mezcla o plug-in en modo HyperControl, en función de la configuración de los botones de modo adyacentes.

Modo MIDI (botón MIDI BANK): Los faders envían mensajes MIDI según estén asignados o de acuerdo al preset actual. Pulse repetidamente el botón MIDI BANK (Banco MIDI) (contiguo a los faders) para cambiar entre tres bancos de asignaciones.

Modo de mezcla HyperControl (Botón MIX ): Los faders controlan las funciones de mezcla comunes.

Modo de instrumentos y efectos HyperControl (Botón INST/FX ): Los faders controlan parámetros útiles del plug-in de instrumentos o efectos seleccionado en ese momento.

6.Botones de fader: Axiom AIR tiene nueve botones de fader (ocho botones de fader de pista más un botón de fader maestro). Use estos controles para enviar mensajes MIDI estándar o controlar de los parámetros de mezcla o plug-in en modo HyperControl, en función de la configuración de los botones de modo adyacentes y el botón SELECT TRACK (Seleccionar pista) de la izquierda.

Modo MIDI (botón MIDI BANK): Los botones faders envían mensajes MIDI según estén asignados o de acuerdo al preset actual. Pulse repetidamente el botón MIDI BANK (Banco MIDI) (contiguo a los faders) para cambiar entre tres bancos de asignaciones.

Modos de mezcla HyperControl (Botón MIX ) y modo de instrumentos y efectos HyperControl (Botón INST/FX ): Los botones de fader tienen distintas funciones para cada pista o parámetro, que dependen de la personalidad de HyperControl de su DAW y de la configuración del botón SELECT TRACK adyacente. Púlselo (varias veces si fuera necesario) para recorrer los distintos modos de los diferentes botones.

7.Pads de disparo: Estos pads de disparo sensibles a la velocidad y a la pos-pulsación son ideales para componer partes de tambor o disparar muestras en un entorno en vivo. Use el botón MIDI BANK para cambiar entre tres bancos asignables de notas MIDI: los pads de disparo se encienden con luz roja en el banco 1, verde en el banco 2 y ámbar en el banco 3. Estos pads controlan también ciertas características del software en modo HyperControl.

Modo MIDI (botón MIDI BANK): Los pads de disparo envían datos de notas MIDI y basados en la presión u otros mensajes MIDI más avanzados, según estén asignados o de acuerdo al preset actual.

Modo de redoble (botón ROLL): Golpee y retenga un pad de disparo para crear un "redoble", una cadena rítmica de notas repetidas. Es posible controlar el ritmo y la velocidad de estas notas con los parámetros de redoble del pad. Pulse dos veces este botón para "enganchar" el modo de redoble, de modo que continúe activado. Púlselo una vez más para desengancharlo.

Modo HyperControl (botón ): Los pads de disparo controlan diversas funciones, que dependen de su DAW.

16

8.Panel de control principal:

A.LCD: Esta pantalla muestra información útil, tal como la asignación y el ajuste actuales del control físico movido más recientemente.

B.Botón EDIT (Edición): Con este botón se coloca el Axiom AIR en modo de edición, que le permite usar las funciones especiales del teclado para crear o editar parámetros globales, funciones de utilidades y asignaciones de control MIDI.

C.Botón TEMPO: Este botón destella al ritmo del ajuste de tempo de la función de redoble del pad de disparo. Golpee este botón a intervalos de 1/4 de nota para establecer el tempo. Mantenga pulsado este botón durante más de dos segundos para ajustar manualmente el tempo, usando la perilla 8 o los botones direccionales ascendente o descendente. Pulse el botón direccional central para guardar este ajuste.

BD

A CE

G

F F F F F F

Nota: Cuando el Axiom AIR recibe mensajes de código de tiempo (MTC) MIDI entrantes, se sincroniza automáticamente con el reloj MIDI externo. Estos mensajes pueden recibirse únicamente por el puerto USB del Axiom AIR.

D.Botón IDENTIFY (Identificación): Mantenga pulsado este botón y mueva un control para identificar su asignación, que aparece en la LCD. Esto le permite saber qué está asignado a ese control sin enviar realmente ningún dato MIDI. Resulta útil para recordarle sus asignaciones sin cambiar sus ajustes, interrumpir su interpretación en vivo, etc. Puede pulsar este botón dos veces para "engancharlo" de modo que permanezca activado. Púlselo una vez más para desengancharlo.

E.Botón MEMORY (Memoria): Este botón le permite guardar y acceder a las posiciones de memoria para memorizar las configuraciones MIDI completas. Para más información, consulte la sección Posiciones de memoria de este manual.

F.Controles de transporte: Estos botones controlan funciones de transporte estándar en el software de la DAW: loop, rebobinar, avance rápido, parar, reproducir y grabar. Cuando se ejecuta una DAW habilitada para HyperControl, estos botones se asignan automáticamente a esas funciones (o a sus alternativas más próximas). También es posible asignar (mapear) estos botones a una variedad de mensajes MIDI.

G.Botones direccionales: Estos botones se pueden usar para diversas funciones de navegación y ajuste de parámetros, que dependen de los botones de modo adyacentes.

Modo de instrumentos y efectos HyperControl (Botón INST/FX): Los botones seleccionan la pista y el plug-in que desea controlar con los faders y perillas.

Modo HyperControl (botón ): Los botones tendrán usos alternativos, específicos de la DAW.

Modo de selección de pista/banco (Botón TRACK): Los botones seleccionan la pista o banco de pistas que se desea controlar en modo HyperControl.

Panel trasero

1 2 3 4 5 6 7 8

1.Interruptor de encendido: Use este interruptor para encender y apagar el Axiom AIR.

2.Entrada de alimentación: Conecte aquí un adaptador de alimentación opcional (9 V CC, 3 A, pin central positivo, que se vende por separado). Como alternativa, puede alimentar el Axiom AIR por el puerto USB de su computadora conectada.

3.Puerto USB: Cuando el Axiom AIR está conectado a una computadora por USB, esta conexión USB alimenta al Axiom AIR y transmite datos MIDI a y desde la computadora.

4.Entrada MIDI: Use un cable MIDI estándar de 5 pines para conectar esta entrada a la salida MIDI de un dispositivo MIDI externo.

5.Salida MIDI: Use un cable MIDI estándar de 5 pines para conectar esta salida a la entrada MIDI de un dispositivo MIDI externo, que le permite reproducir los sonidos en un módulo de sonido MIDI o un sintetizador de rack por ejemplo.

6.Entrada para pedal de expresión: Conecte a esta entrada ya sea un pedal de expresión tipo "interruptor" o estándar (que se vende por separado) para permitir realizar cambios expresivos durante la interpretación. Esta entrada es asignable a distintas funciones.

7.Entrada para pedal de sostenido: Conecte a esta entrada un pedal de sostenido de contacto momentáneo (que se vende por separado), para permitirle sostener las notas que toca en ese momento sin necesidad de mantener pulsadas las teclas. Esta entrada es asignable a distintas funciones.

Nota: Cuando encienda el Axiom AIR, verifique que el pedal de sostenido tenga la "polaridad" correcta —es decir, que sostiene las notas cuando se presiona. Si el pedal de sostenido funciona "en reversa", retire su pie del mismo y apague y encienda nuevamente el Axiom AIR. (Cuando se enciende el Axiom AIR, explora el pedal de sostenido para verificar si está en la posición levantada/desactivada.)

8.Ranura de seguridad Kensington®: Este conector es compatible con cables de seguridad Kensington tipo laptop estándar para protección antirrobo.

17

Ajustes de interpretación

En esta sección se explican los ajustes que cambian las funciones del teclado y los pads de disparo del Axiom AIR.

IMPORTANTE: Cuando este manual se refiere a una "tecla", significa una tecla del teclado con un rótulo impreso en la misma (por ej., "PAD LEARN", "PAD ROLL," etc.) y no un botón de otro lugar del producto.

Pads de disparo

PAD LEARN

Es posible asignar fácilmente sonidos del teclado a los pads de disparo utilizando la función Pad Learn (Aprendizaje de pads). Esto puede ser útil si desea usar los pads de disparo para enviar ciertas notas MIDI a fin de disparar un sonido en su instrumento virtual.

Para asignar una nota MIDI de un pad de disparo:

1.Pulse el botón EDIT. Destella con luz roja.

2.Pulse la tecla PAD LEARN del teclado. Aparece Learn:C-2 en la pantalla LCD.

3.Pulse una tecla del teclado para seleccionar la nota MIDI deseada.

4.Si fuera necesario, pulse el botón MIDI BANK contiguo a los pads de disparo para seleccionar el banco de pads que contiene el pad deseado.

5.Pulse el pad de disparo deseado para asignar la nota elegida al pad. Aparece en la pantalla LCD el número del pad deseado. Después de un momento, el Axiom AIR sale automáticamente del modo de edición.

PAD ROLL

Cuando se está en modo Pad Roll (Redoble), al golpear y mantener presionado un pad de disparo, se crear un "redoble", una cadena rítmica de notas repetidas.

Para activar el modo de redoble, realice una de las siguientes acciones:

Mantenga presionado el botón ROLL. Suelte el botón para desactivar el modo de redoble con pad.

Pulse dos veces este botón para "enganchar" el modo de redoble, de modo que continúe activado. Púlselo nuevamente para desenganchar/desactivar el modo de redoble con pad.

Pulse el botón EDIT y luego la tecla PAD ROLL del teclado.

Para ajustar el ritmo y la duración del redoble:

1.Active el modo Pad Roll (según se explica arriba).

2.Use los botones de fader para ajustar la subdivisión rítmica (1/4, 1/4T [triplete], etc.).

3.Si no está ya en modo de edición (a partir del paso 1), pulse el botón EDIT y luego la tecla PAD ROLL del teclado.

4.Use los botones direccionales izquierdo y derecho para disminuir o aumentar (respectivamente) en "swing" del redoble.

5.Use los botones direccionales ascendente y descendente para disminuir o aumentar (respectivamente) la longitud de cada nota.

Asignación de parámetros

Cuando usted desea más flexibilidad en el control que la que ofrece el modo HyperControl o está usando una DAW sin personalidad HyperControl de Axiom AIR, puede configurar las perillas, faders, botones y pads de disparo del Axiom AIR para que generen una variedad de mensajes MIDI: controladores continuos (CC), números de parámetros registrados (RPN), números de parámetros no registrados (NRPN) o exclusivos del sistema (SysEx).

Como mejora con respecto a los teclados M-Audio Axiom Pro anteriores, cada una de las tres secciones de controladores (perillas, faders y pads de disparo), puede cambiar independientemente entre el modo HyperControl y el modo MIDI. De esta forma, por ejemplo, puede usar los faders para mezclar en modo HyperControl mientras usa simultáneamente los pads de disparo para reproducir muestras en modo MIDI.

18

Loading...
+ 42 hidden pages