Pullout Keyboard Shelf Instructions
1
2
for Metal Carts
08/01/13
www.luxorfurn.com
www.hwilson.com
H x1
Parts List
FL x1
C
FL
C
FR x1
FR
Tools Required
- Phillips Screwdriver
- Pliers or Adjustable Wrench
A x4
FL
C x4
(Back)
FR
(Front)
A
A
Take the top shelf of your metal cart and lay it ξ
at. Collect parts: FL,
FR, A & C. Push Screw A through the hole at the top of the shelf.
Lay bracket FL & FR on top of screw A. Take nut C and fasten with a
screwdriver and pliers, do not tighten fully until shelf is attached.
H
Collect parts: H. Align the pullout shelf H runner so that the runner
snaps into place into the FL & FR brackets. Pull the shelf out to
make sure it is fully seated. Tighten screws A and nut C. Pullout
keyboard shelf assembly is now complete.
01/31/13
www.luxorfurn.com
www.hwilson.com
Adjustable Height
Metal Cart Instructions
AVJ42, W42A
C
Parts List
Non-slip mat
A x1 B x1 C x4
A
Cabinet comes
pre-assembled
on units that
include a cabinet.
Tools Required
- Phillips Screwdriver
- Rubber Mallet
- Pliers or Adjustable Wrench
D x4 E x4
A
E
D
B B B
1 2 3
Position the bottom shelf B so that the
caster holes are facing up. Insert caster C
into the caster holes on the bottom of shelf
B. Use a mallet to set the casters properly.
Flip bottom shelf B so that it is on its side.
Set top shelf A so that it overlaps bottom
shelf B. Align the screw holes so that the
top shelf A is at the desired height.
E
Insert screw D through the aligned screw hole
of A and B and fasten nut E with pliers and
screwdriver. Place Non-slip mat on desired
shelf. The cart is now complete.
D
01/31/13
www.luxorfurn.com
www.hwilson.com
Electric Assembly
Instructions
Number of outlets
may vary.
Parts List
Tools Required
- Screwdriver
A x1 B x1 C x2 D x2
D
D
(Plastic or Metal
Mounting Surface)
C
1
Push screw C through electric outlet A. Make sure
the electric outlet A and cord wrap B align with the
mounting surface screw holes. Push screw C through
cord wrap B and the mounting surface screw holes.
Use wing nut D and screwdriver to fasten.
B
A
C
Loading...