Input/OutputModule
55000-875
•ADM loop technology with Apollo/Discovery protocol
•One line-monitored input and one dry relay output 230VAC
•Setting of module address by means of address switch
•Integrated dual-isolator
•Status LEDs for input and output
Description
The addressable Module 55000-875 serves for the line- |
means of a relay output with a dry change-over contact, |
monitored integration of a contact detector, such as a |
via the ADM loop. |
manual call point, a sprinkler system contact or a su- |
The address is easily selected by means of a built-in DIL |
pervising contact, into the bidirectional communication |
switch. Status LEDs indicate the condition of input and |
on the ADM loop with Apollo/Discovery protocol. Fur- |
output. The module has an integrated dual-isolator and |
thermore, it can be used to actuate external devices by |
is fitted into a plastic case. |
Specifi cations
Operating voltage |
Supply through loop voltage |
Current consumption |
approx. 1.25mA (quiescent) |
Contact rating |
2A/48VDC or 5A/230VAC |
Ambient temperature |
-20°C to +70°C |
Dimensions L × W × H |
150 × 90 × 48 (mm) |
Colour |
white |
Weight |
240g |
Order number |
249078 |
Order name |
Module 1xSurv.In 1xRel.Out-230/Apo 55000-875 |
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 |
55000-875_DBL_LST_EN_0804.PDF • PAGE 1 |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED |
|