LogiLink HD0101 User guide

Size: 84 x 118.4mm * 100P 雪銅紙 * 拉頁, 一本德文(在前)英文手冊, 另一本西班牙文(在前)波蘭文手冊 * 兩面, 正四色反四色彩色印刷
Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment.
1.0 Safety Instructions
Put the Device always on a stable and straight Surface. In case of falling it can be damaged. Don’t place the Device into direct Sunlight or in Places with high Temperature. This can damage the Device or shorten his average useful Life. Don’t place it in the near of Heat Sources, like Radiators or other heat producing Devices. Don’t expose the Device to Rain, Water, Wetness or high Humidity. Don’t place it in the Bathroom or the Kitchen in the near of a Sink. Avoid the direct Contact with Water. Don’t try to open the Device. Prior to the first use of our product make a backup of your data. We are not liable for any loss of data, unless you can accuse us intention or gross negligence. In any case, liability for loss of data is limited to the effort that is necessary to restore from existing backup copies.
Congratulations to the Purchase of Logilink HD0101!
Please read the Manual and Safety Instructions before using the product for the first time. Otherwise damage can be the result.
2.0 Introduction
The HDMI Repeater extends the length of any HDMI cable by regenerating the HDMI signal before it sends the outputs to the HDMI monitor or projector. The HDMI Repeater will clean out the digital noise (sparkles) in your picture. The input of the HDMI repeater is connected with a long HDMI (male to male) cable from the HDMI device like DVD player or Satellite set top box with a HDMI output port. The HDMI repeater output is connected to a second HDMI (male to male) cable to go from the output to any HDMI display or projector with a HDMI connector. The box is placed near the display to remove any noise that has been generated by a long HDMI cable.
2.1 Features
This kind of the HDMI Repeater has many features that enable it to perform in a superior manner. Among those features you will find:
Compliance with HDMI High Speed specification Extends the HDIM signal up to 35 m HDTV: 480i/576i/480p/576p/720p/1080i/1080p Bandwidth: 165MHz/1.65Gbps per channel (4.95Gbps all
channel)
Supports HDCP pass-through, LPCM Supports 8bit per channel (24bit all channel) deep color
2.2 Specifications
Signal Inputs/Output
Input Video Signal 5 Volts p-p (TTL) Maximum Single Link Range 1920x1080P Output Video HDMI High Speed HDMI Input/Output Connector
Type A 19 pin
Operating Frequency Vertical Frequency Range 50/60Hz Video Amplifier Bandwidth 1.65Gbps/165MHz Resolutions(HDTV) Interlaced(50&60Hz) 480i, 576i, 1080i Progressive(50&60Hz) 480p, 576p, 720p, 1080p Mechanical Size (W-H-D) 27mm x 49mm x 15mm Weight(Net) 0.017KGs Environmental Operating Temperature 0 ºC to +70 ºC Operating Humidity 10% to 85 % RH (no
condensation) Storage Temperature -10 ºC to +80 ºC Storage Humidity 5% to 90 % RH (no condensation) Power Requirement External Power Supply 5V DC@2A(optional) Power consumpti on (Max) 3W Accessories Adapter AC Power Adapter US standard, UK standard and so
Note: Specifications are subject to change without notice.
on
2.3 Package Contents
HDMI Repeater User Manual
3.0 Panel Descriptions
HDMI input Power input HDMI output
4.0 Connection and Operation
1) Connect the source device output into input of the HDMI
Repeater and connect output of the HDMI Repeater to the HDMI display unit. The HDMI Repeater is put close to the HDMI display unit (Input cables are optional)
* Please refer to connection diagram section.
2) Insert the DC side of 5v power supply if the 5v of the source is
not enough.
Attention: Insert / Extract cable gently.
Connection Diagram
The CE mark confirmed that this product meets the main requirements of the Directive 2004/108/EC of the European Parliament and the Council of Europe concerning telecommunications and terminals regarding the Safety and health of users and of electro-magnetic interference compliance. The CE has been demonstrated. These statements are deposited by the manufacturer.
Loading...