Lithonia Lighting W002223844 Specification

Catalog

(29.8)

(5.1)

Number

Notes

FEATURES & SPECIFICATIONS

INTENDED USE — Ideal for applications requiring attractive, quick-installation exit signs and low energy

consumption.

CONSTRUCTION

sion-proof. UL94V-0 flame rating. UV-stable resin resists discoloration from natural and man-made light sources.

Rugged unibody housing snaps together with no additional mechanical fasteners. Faceplate and back cover are inter­changeable on housing. Positive snap-fit tabs hold faceplate securely, yet easily removable for lamp compartment access.

Universal directional Chevron inserts are easily removed and reinserted. Uniform illumination without
shadows or hot spots. Reinforced, impact-resistant color panels. Letters 6” high with 3/4” stroke, with 100
ft. viewing distance rating, based upon UL924 standards.

U.S. Patent No. 5,526,251; 5,611,163; 5,739,639; 5,954,423; 5,988,825; 6,152,581; D383,501 ;
D495,751 and 6,502,044. Other patents pending.

OPTICS

lamp operates in normal (AC input) and emergency (DC input) modes.

The typical life of the exit LED lamp is 10 years.

ELECTRICAL

Low-voltage disconnect prevents excessively deep discharge that can permanently damage battery. Conve­niently located test switch and LED provide visual and manual means of monitoring system.

Constant-current series charger minimizes energy consumption and provides low operating costs. Printed
circuit boards are 100% quality tested during manufacturing. Current-limiting charger circuitry protects
printed circuit boards from shorts.

AC/LV reset (line latch) allows battery connection before AC power is applied and aids in preventing battery
damage from deep discharge.

Crystal oscillator timing system with watchdog protection for precision accuracy.

Brownout protection is automatically switched to emergency mode when supply voltage drops below
80% of nominal.

Battery: Sealed, maintenance-free nickel-cadmium battery delivers 90-minutes capacity to emergency lamps.
Two-state constant-current charge maximizes battery life and automatically recharges after battery discharge.

Diagnostics: Single-point microcomputer control for all electronic features.

Single multi-chromatic LED indicator to display two-state charging, test activation and three-state diag­nostic status.

Test switch provides manual activation of 30-second diagnostic testing for on-demand visual inspection.
Self-diagnostic testing for five minutes every 30 days and 30 minutes every six months.

Diagnostic evaluation of LED light source, AC to DC transfer, charging and battery condition. Continuously
monitors AC functionality.

INSTALLATION

pattern on back panel. Housing snaps to canopy with four positive-locking tabs. Cam-locking pin tightly
secures housing to canopy.

Ships standard with additional face plate.

LISTINGS

UL924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards. NEMA Premium certified.

Meets all applicable FCC requirements.

—

Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant, and corro-

— LEDs mounted on printed circuit boards. Low energy consumption – less than one watt. LED

— Dual voltage input capability (120/277V).

— Universal (top-, end-, or back-) mounting. Easily removed mounting knockouts. J-box

— UL damp location listed 50°-104°F (10°-40°C) standard. NOM Certified (see options). Meets

Type

Thermoplastic Exits

LQM

LED LAMPS

Specifications

Length: 11-3/4 (29.8)

Depth: 2 (5.1)

Height: 7-5/8 (19.3)

Weight: 2.6 lbs (1.2 kgs)

All dimensions are inches (centimeters) unless otherwise specified.

11-3/4

WARRANTY — 5-ye ar limited warrant y. (Battery is pr orated.) Complete war ranty terms lo cated at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual pe rformance may d iffer as a result of end -user environme nt and applicatio n.
All values ar e design or typic al values, measure d under laborator y conditions at 2 5 °C.
Specifications subject to change without notice.

7-5/8
(19.3)

2

ORDERING INFORMATION

For shortest lead times, configure product using bolded options.

Example: LQM S W 3 R 120/277 EL N

LQM

Family Face t ype Housing color Number of faces Letter color Input voltage

LQM S Stencil

P Panel

(blank) Black

1

W White

3 Single face

with extra
faceplate

R Red
G Green

120/ 277 Dual

and color
panel

2

voltage

Operation Options

(blank) AC on ly
X2 Primar y and

secondary
AC inputs
provided

(blank) None

NOM

SD Self-diagnostics

3

SDFIFA Self-diagnostics, fire alarm flashing interface and

EL N Nickel

cadmium

NOM certified for Mexico

flashing emergency operation and intermittent
audible alarm (one flash/one second)

4

5

5

battery

Notes

1 Only available in custom signage. See spec sheet, Custom-Signage.
2 Some special voltages available. Consult factory.

Accessories: Order as separate item.

ELA WG1 Back-mount wireguard6ELA WGEXE End-mount wireguard

ELA WGEXT Top-mount wireguard6ELA LQMUS12 12” stem kit

7

6

3 Must specify input voltage 120 or 277. Not available with other options.
4 Available with stencil face and white housing only.
5 Only available with EL N operation.
6 See spec sheet ELA-WG.
7 See spec sheet ELA-Stemkits.

EMERGENCY LQM

LQM LED, Quantum

®

SPECIFICATIONS

ELECTRICAL

Primary Circuit

Type

1

Typical

LED life

Red LED AC Only 10 years

Green LED AC Only 10 years

Red LED Emergency 10 years

Green LED Emergency 10 years

BATTERY

Nickel Cadmium

Voltage

Typical

shelf life

Typical

3

1.2 3 years 7-9 years none 50°F - 104°F

Notes

1 LED lamps operate in normal (AC input) and emergency (DC input) modes.

2 Based on continuous operation. The typical life of the exit LED lamp is 10 years.

3 At 77°F (25°C).

4 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced and tested

in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required
maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

5 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower tempera-

tures affect life and capacity.

2

life

Supply

voltage

Input
watts

120 .62 .05
277 .69 .06
120 .62 .05
277 .74 .06
120 .71 .05
277 .92 .06
120 .66 .05
277 .70 .06

3

Maintenance

4

Max.

amps

Temperature

5

range

(10°C - 40°C)

MOUNTING

All dimensions are inches (centimeters) unless otherwise specified.

Shipping weight: 2.6 lbs. (1.2 kgs.)

Top Mounting

End Mounting

5-5/8
(14.7)

11-3/4

(29.8)

Back Mounting

5-7/8
(14.9)

11-3/4

(29.8)

7-5/8
(19.3)

3-7/8
(9.6)

4-1/2
(11.4)

8-3/8
(21.3)

2

(5.1)

7-5/8
(19.3)

LQM

EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: [phone] [e-mail] www.lithonia.com ©1993-2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/09/18