Lightolier VP Parabolic DZA1G16MS140 User Manual

Size:
1.44 Mb
Download
Section 2/Folio G09-25

 

VP PARABOLIC DZA1G16MS140

Page 1 of 2

1’ x 4’ RECESSED FLUORESCENT 16 CELL PARABOLIC LOUVER

Features

STATIC AND AIR SUPPLY/RETURN IES RP24 PREFERRED

 

Meets IES RP-24Preferred Practice.

Ideal for intensive VDT use area.

Only 5.5” deep.

Utilizes CFI Advance Technology Reflector Louver.

Faceplate made with die-formed20 gauge steel with edges hemmed for rigidity.

Full length air slots with bent edge for rigidity.

Precise fitting reflector louver.

Louver securely held with CFI concealed torsiontite spring clips

Fixture Efficiency 62.4%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Job Information

Type:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978)657-7600• Fax (978)658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131• Fax (508)674-4710We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902

Section 2/Folio G09-25

 

VP PARABOLIC DZA1G16MS140

Page 2 of 2

1’ x 4’ RECESSED FLUORESCENT 16 CELL PARABOLIC LOUVER

 

STATIC AND AIR SUPPLY/RETURN IES RP24 PREFERRED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ORDERING INFORMATION Explanation of Catalog Number. Example: DZA1G16MS140120OC

Specifications

PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1 reflectance 80% ceiling, 50% wall, 20% floor the C.U. shall no be less than 0.69. To prevent glare the VCP shall not be less than 88 either lenghtwise or crosswise (at 100 fc level) and that the average luminance will conform with the IESRP-24preferred standard, and have a fixture efficiency of not less than 60%.

MATERIALS: Chassis parts are die formed 22 gauge cold rolled steel. Faceplate is die formed 20 gauge cold rolled steel with edges hemmed for rigidity.

LOUVER: Post-anodizedaluminum.

Specifications (continued)

ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certified by ETL if K.O. is within 3” of ballast use wire suitable for at least 90°.

LABELS: Listed by CSA/UL.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Job Information

Type:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FINISH: Louver - Low iridescense specular postanodized vertical grain sheet or Low iridescence reflector mattepost-anodizedvertical grain sheet. Chassis exterior - white baked polyester powder coat.

Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: (978)657-7600• Fax (978)658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131• Fax (508)674-4710We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902