Tangent™ Track Lighting System FXS
Page 1 of 2 |
|
|
Suspension Track |
|
|
47 5/8 in [1210 mm] |
|
|
FXS04 |
3/16 in |
95 5/8 in [2429 mm] |
|
3/16 in |
FXS08 |
143 5/8 in [3648 mm] |
1 |
FXS12 |
||
|
|
|
|
FXS52 |
|
|
|
|
FXS53 |
|
|
|
6 |
FXS54 |
6 |
|
|
|
FXS55 |
|
|
|
|
FXS67 |
|
5 |
|
|
FXS68 |
|
|
|
FXS82 |
|
|
95 5/8 in [2429 mm] |
|
|
|
3/16 in |
2 |
3/16 in |
|
FXS84 |
|
|
|
FXS86 |
|
|
|
|
|
|
|
|
4 |
1 3/8 in [34 mm] |
FXT08 |
|
|
|
|
FX100 |
|
1 |
|
3/8 in [9 mm] |
|
|
|
|
|
|
6 |
3 |
Ordering Information |
|
|
|
Catalog No. |
Finish |
Description |
Track Mountings |
FXS04 |
Clear Anodized |
4’ Tangent Suspension Beam Track |
Tangent Suspended Track and Suspended |
FXS08 |
Clear Anodized |
8’ Tangent Suspension Beam Track |
Truss Track may be suspended with stems at a |
FXS12 |
Clear Anodized |
12’ Tangent Suspension Beam Track |
maximum of 6’ on center. Additional suspension |
FXS52 |
Silver |
Suspension Variable Angle Coupler, Mechanical Only |
points may be necessary when creating patterns |
FXS53 |
Silver |
Suspension Variable Angle Coupler, Electro/Mechanical |
or for balancing loads. |
FXS54 |
Silver |
Suspension Mini Coupler, Electro/Mechanical |
|
FXS55 |
Clear Anodized |
Suspension Mini Coupler, Mechanical Only |
|
FXS67 |
Silver |
Tangent Suspended Power Feed Canopy, 10' |
|
FXS68 |
Silver |
Tangent Suspension Non-Powered Cable Kit, 8' |
|
FXS84 |
Silver |
Tangent Suspension 18" Stem Kit |
|
FXS86 |
Silver |
Tangent Suspension 48" Stem Kit |
|
FXT08 |
Clear Anodized |
8’ Tangent Suspended Truss Track |
|
FX100 |
n/a |
Bending Tool |
|
Features
Tangent Suspended Track and Truss Track are a one-circuit electrical distribution system designed to support and supply all Tangent lighting units in a flexible manner. The track can be installed individually in straight runs or in a variety of patterns using the appropriate connectors. The track may also be field bent by hand or with an FX100 bending tool into curves with a minimum radius of 3'. All track lengths can be field cut.
1.Tangent Suspended Track: Anodized aluminum with a clear protective coating
2.Truss Track: Anodized aluminum with a clear protective coating
3.Insulating Liner: Clear polycarbonate; houses conductors
4.Conductor (2): Tin plated copper
5.Polarity Dimple: Identifies the 120V line conductor
6.End Cap: Silver painted polycarbonate
Finish
Tangent Suspended Track and Truss track are anodized aluminum with a clear protective coating. Connectors and end caps are painted in a coordinating silver finish. All painted finishes are baked enamel.
Lightolier is a Philips group brand
Electrical
Capacity is 20 amps at 120 volts, 60Hz per branch circuit. The track units are polarized and continuously grounded throughout. Electrical conductors are contained in the polycarbonate extrusion. Track is intended for wiring to branch circuit building wire with ground. All wiring must be in accordance with National and Local Codes.
Labels
cULus; Patent Pending
Job Information |
Type: |
|
|
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish. www.lightolier.com © 2008 Philips Group • D1008