Lightolier F7000-26 User Manual

Size:
150.39 Kb
Download

Lighting Systems F7000-26

1BHF PG

' 4FSJFT -JHIU5-FOT8BMM .PVOU

 

 

3.25”

 

 

 

 

 

 

 

(8.26cm)

 

 

4

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.63”

 

 

 

 

 

 

 

(4.14cm)

 

 

 

 

 

 

6

 

 

 

 

 

 

1

 

 

 

 

 

 

 

4.51” (11.46cm)

 

 

 

Ordering Information

 

 

 

 

 

 

Family

Series

Type

Lamps

Color

Wattage

Voltage

Length

FW7

6

5

1

 

 

 

 

6 = Lens

5 = Extruded

1 = 1 Lamp

AL = Aluminum

1

= 28W

1 = 120v

4 = 4’ (121.92cm)

 

Lens

 

WH = White

2

= 54W

2 = 277v

8 = 8’ (243.84cm)

 

 

 

 

3 = 28W Dimming

 

 

 

 

 

 

4

= 28W EM

 

 

 

 

 

 

5 = 54W Dimming

 

 

Complete Ordering Instructions below.

 

 

 

6

= 54W EM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features

1.Housing: Single piece of high purity extruded aluminum, a portion from recycled material.

2.Housing End: Die-castaluminum, welded in place.

3.End Cap: Die-castaluminum. Encloses the end of the run.

4.Lamps: F28T5 or F54T5HO as specified. By others. Installed from the ceiling side of the luminaire.

5.Ballast: Electronic. Meets ANSI starting,end-of-lifeprotection and sound rating specifications. Low THD.

6.Shielding: Extruded acrylic with suspended bead texture; inset metal rod.

Electrical

Connections: Pre-wiredwith 18 gauge wires and polarized cannon plug connectors for simultaneous mechanical/electrical connection.

Emergency Battery Pack: 90 minute operation, 700 lumens for 54W and 520 lumens for 28W.

Dimming: Advance Mark X standard (no additional wires required); use compatible dimmer. Dimming ballasts using additional control wires (eg LutronHi-LumeorECO-10,Osram) can be used; consult factory and use X4 or X5 power feeds

with additional leads, as appropriate. Ballast not to exceed 1.25” (3.18cm) wide by 1.20” (3.05cm) high.

iGEN: F7000 accepts iGEN (DALI) with supplemental2-wirecontrol technology. Use with X5 power feed.

Power Tray: Code-gauge,die-formedsteel,pre-paintwhite enamel finish; secured byquarter-turnfasteners for easy access to wiring. Holds ballasts, sockets, and wiring. Accepts ballasts up to 1.25” (3.18cm) wide by 1.20” (3.05cm) high.

Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

Finish

Powder-coated,baked enamel, white or aluminum, as specified.

Mounting

Each module includes two wall-mountingbrackets. Bracket hole pattern accommodates junction box (single gang box rotated 90 degrees) or other appropriate mounting method using customer supplied fasteners.

Labels

UL, cUL and I.B.E.W.

Ordering Instructions

Individual Fixtures:

1.Order one MODULE.

2.Order one END SET.

Continuous Rows:

1.Order the appropriate number of MODULES for the complete run.

2.Order one END SET.

Finish

Powder coated White or Aluminum baked enamel.

Custom colors are available, consult factory.

Labels

UL , cUL and I.B.E.W.

Job Information

Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

"JSQPSU 3PBE 'BMM 3JWFS ." t t 'BY

We reserve the right to change details of design, materials and finish.

XXX MJHIUPMJFS DPN ½ 1IJMJQT (SPVQ t E0808

Lighting Systems F7000-26

1BHF PG

Performance

CANDLEPOWER CURVE

 

 

CANDLEPOWER

 

 

180

170

160

 

ZONE

0

22

45

67

90

 

 

 

 

 

 

 

 

150

 

DEG.

 

 

 

 

 

 

 

 

 

140

 

 

CANDELAS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

130

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

120

 

0

 

510

510

510

510

510

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

110

5

 

519

519

520

516

510

 

 

 

 

 

 

15

 

523

523

519

508

492

 

 

 

 

100

25

 

508

505

497

479

455

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35

 

477

474

458

435

405

 

 

 

 

 

90

45

 

431

427

406

378

340

 

 

 

 

 

 

 

250

 

 

80

55

 

375

367

341

307

264

 

 

 

 

65

 

304

296

267

228

181

 

 

 

 

 

 

 

500

 

 

70

 

75

 

223

216

185

142

92

 

 

 

 

85

 

151

141

106

62

18

 

 

 

 

60

 

 

 

 

 

 

 

90

 

132

120

85

42

0

750

 

 

 

 

 

 

 

50

 

95

 

164

153

129

104

38

 

 

 

 

40

 

105

 

378

383

366

341

186

1000

 

 

30

 

115

 

656

652

624

504

351

 

 

 

 

20

 

 

0

 

 

 

 

10

 

 

125

 

894

874

775

650

506

 

 

 

 

 

 

 

 

 

 

 

 

 

REPORT NO.: ITL54696.IES

135

 

988

960

887

774

646

 

LAMPS: 1-F54T5

145

 

1048

1022

957

870

767

 

LUMENS: 5000 each

155

 

1056

1039

999

928

860

 

EFFICIENCY: 81.6%

165

 

1033

1020

996

957

921

 

CAT. NO.: F7762WH214

175

 

972

967

967

959

952

 

 

 

 

 

 

180

 

950

950

950

950

950

Fixture Lengths & Mounting Reflected (Plan View)

 

 

 

 

2'-8"

 

 

 

 

 

 

 

 

 

 

 

 

 

6'-8"(203.20cm)

 

 

 

 

 

 

 

 

 

 

(81.28cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4'-3"(129.54cm)

 

 

8'-3"(251.46cm)

6'-8"(203.20cm)

1'-4"

2'-8"

 

 

(81.28cm)

 

 

(40.64cm)

 

 

 

 

 

12'-3"(373.38cm)

 

 

 

6'-8"(203.20cm)

1'-4"

6'-8"(203.20cm)

 

 

(40.64cm)

 

 

 

 

 

 

 

16'-3"(495.30cm)

 

 

6'-8"(203.20cm)

1'-4"

6'-8"(203.20cm)

1'-4"

2'-8"

(81.28cm)

(40.64cm)

(40.64cm)

 

 

20'-3"(617.22cm)

Recommended mounting is a single gang outlet box rotated 90 degrees at the feed point. Remaining mounting points could be outlet boxes as well, or a couple

of holes per mounting point spaced 3-1/4”(8.26cm) at1-3/4”(4.45cm) above the bottom of fixture.

' 4FSJFT -JHIU5-FOT8BMM .PVOU

COEFFICIENTS OF UTILIZATION

% EFFECTIVE CEILING CAVITY REFLECTANCE

 

 

 

80%

 

 

 

70%

 

 

 

50%

 

 

 

 

 

 

WALL REFLECTANCE

 

 

 

 

 

50

30

10

 

50

30

10

 

50

30

10

 

0

83

83

83

 

76

76

76

 

60

60

60

 

1

72

70

66

 

65

63

60

 

52

50

48

 

2

63

58

54

 

57

53

49

 

45

43

40

RATIO

3

55

49

45

 

50

45

41

 

40

36

33

4

48

43

37

 

44

38

34

 

35

31

28

CAVITY

5

43

37

32

 

39

33

30

 

31

27

24

6

39

32

27

 

35

30

26

 

28

24

20

 

7

35

28

24

 

31

26

22

 

26

21

18

ROOM

8

31

26

21

 

29

23

20

 

23

19

16

10

26

20

16

 

24

19

15

 

20

15

13

 

9

29

23

19

 

26

20

17

 

21

17

14

20% FLOOR CAVITY REFLECTANCE

DISTRIBUTION

 

 

 

 

Zone

Lumens

% Lamp %Luminaire

 

0 - 90

1279

25.5

31.0

90

- 180

2790

56.1

69.0

0

- 180

4069

81.6

100.0

16.00" (40.64cm)

3/4"

(1.91cm)

JOINING DETAIL

GAP BETWEEN FIXTURES

1-1/2"

(3.81cm)

3/8" (0.95cm)

END OF ROW DETAIL

Mounting Accessories

Wall Mount End Set

FW7EWH = White

FW7EAL = Aluminum

Job Information

Type:

"JSQPSU 3PBE 'BMM 3JWFS ." t t 'BY

We reserve the right to change details of design, materials and finish.

XXX MJHIUPMJFS DPN ½ 1IJMJQT (SPVQ t E0808