Lightolier F7000-16 User Manual

Size:
160.17 Kb
Download

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lighting Systems F7000-16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1BHF PG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.77” (14.66cm)

 

 

 

 

 

' 4FSJFT 1PJOU 4PVSDF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Armstrong® TechZone™ Compatible

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.63” (4.14cm)

4

5

Ordering Information

Family Series Type Lamps Color Wattage Voltage Length Options

F7

 

 

3

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 = Block

 

 

7 = Point Source

 

1

= 1

Lamp

 

 

AL = Aluminum

 

7

= 20W

HID

 

1 = 120v

 

1

= 1’ (30.48cm)

 

X4 = 4 Through

 

 

 

 

 

 

 

 

 

2

= 2

Lamps

 

 

WH = White

 

8

= 39W

HID

 

2 = 277v

 

2

= 2’

(90.96cm)

 

Wires

 

 

 

 

 

 

 

 

 

4

= 4

Lamps

 

 

 

 

 

9

= 75W

MR16

 

4

= 4’

(121.92cm)

X5 = 5 Through

Complete Ordering Instructions below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wires

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features

1.Housing: Unitized body of extrudedhigh-purityaluminum, partially recycledpre-consumer,withdie-castends welded in place; matched to fluorescent modules in the series. All modules connect and suspend like fluorescent modules.

2.Housing End: Die-castaluminum, welded to the ends of the housing.

3.End Cap: Die-castaluminum. Encloses the suspension cable and power feed cord for the end of the run.

4.MR16: Lamping is 75W maximum. Transformer is electronic, 12V secondary, 120V or 277V primary (as specified) Gimbal ring provided as part of the module and regressed into it. 45° aiming; accepts one standard Lytespan 2” (5.08cm) filter or louver; regressed lamp pulls out for relamping. The 12” (30.48cm) MR16 module can be cantilevered from the end of a run of fluorescent fixtures.

5.Metal Halide: Lamping is 20W or 39W. Ballast is electronic, 20W or 39W, as specified, 120V or 277V, as specified. Connector accepts selected Lytespan PowerArc Modular Track heads. Compatible Track heads include standard Lytespan PowerArc modular track heads, which connect to the module. 8300, 8303, 8304, 8313, 8314, 8316, and 83W4 with applicable reflectors. Track heads and applicable reflectors must be specified and ordered separately, including appropriate finish. Finish ispowder-coated,baked enamel, white or aluminum, as specified.

6.Electrical: Pre-wiredwith 18 gauge wires and polarized cannon plug connectors for simultaneous mechanical/electrical connection. Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.

7.Finish: Powder-coated,baked enamel, white or aluminum, as specified.

8.Power Feeds: Standard 18/3 power feed is rated for 10 amps. X4 power feed is 18/4 and is rated for 7 amps. Observe amperage limitations and provide additional Intermediate Power Cables, as required. When providing an additional power feed, the through wiring from the previous module must be disconnected from the cannon plug and capped.

9.Mounting: Suspended by 1/16” (0.16cm) stainless steel cable, adjustable; precisely modular 1’ (30.48cm), 2’ (90.96cm) or 4’ (121.92cm) suspension centers; 4 1/2” (11.43cm) white canopy.

Labels

UL, cUL and I.B.E.W.

Job Information

Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

"JSQPSU 3PBE 'BMM 3JWFS ." t t 'BY

We reserve the right to change details of design, materials and finish.

XXX MJHIUPMJFS DPN ½ 1IJMJQT (SPVQ t %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lighting Systems F7000-16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1BHF PG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

' 4FSJFT 1PJOU 4PVSDF

MR16

 

 

12.00” (30.48cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24.00” (60.96cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12.00” (30.48cm)

1 Light MR16

2 Light MR16

48.00 (121.92cm)

12.00” (30.48cm) 12.00” (30.48cm)12.00” (30.48cm)

4 Light MR16

HID

24.00” (60.96cm)

 

1 Light HID

48.00 (121.92cm)

24.00” (60.96cm)

2 Light HID

Job Information

Type:

"JSQPSU 3PBE 'BMM 3JWFS ." t t 'BY

We reserve the right to change details of design, materials and finish.

XXX MJHIUPMJFS DPN ½ 1IJMJQT (SPVQ t %