Previous
PulseGuard® Suppressors
Polymeric ESD Suppressors
PGD Series Connector Array ESD Suppressor
With similar performance features as the surface mount ESD products, the connector array products provide the first line of defense against ESD events. For use in standard D-Subminiatures, these suppressors intercept the ESD pulses before they enter the electronic equipment. The pulses are shunted to the grounded shell of the connector and kept off of the circuit board. The connector configuration takes up zero board space and can also be used as a retrofit solution in cases where the ESD problem was identified after the board design was complete.
Electrical Characteristics:
• Capacitance |
<2 pF1 |
• Leakage Current |
<0.1µA2 |
• Off state Resistance |
10 MΩ2 |
• Clamping Voltage |
100V3, typical |
• Operating Voltage |
24 VDC |
• Peak Current |
45A, at 15 kV |
•Bi-directional
•Product Rated for 10,000 cycles
PHYSICAL SPECIFICATIONS: Body Material: Polyimide
Terminations: Spring contacts
Voltage Variable Material: Littelfuse polymeric formula.
Soldering Parameters:
• Press-in fitting, soldering not necessary.
Packaging: Bulk, bagged and tagged.
ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: -65°C to 125°C
Vibration: Withstands 10-55Hz per MIL-STD-202F, Method 201A and 10-2000Hz at 20 G’s per MIL-STD-202F, Method 204D, Condition D.
Thermal Shock: Withstands 5 cycles of -50°C to 125°C
ORDERING INFORMATION:
1 Tested at 1 Megahertz
Catalog |
Mounting |
Number |
|
Pin |
Number |
Option |
of Pins |
Size (in.) |
|
PGD009S030BSA01 |
90° Angle |
9 |
0.018 - 0.028 |
|
PGD009S030CSA01 |
90° Angle |
9 |
0.030 - 0.040 |
|
PGD009S030CSF01 |
Front |
9 |
0.030 - 0.040 |
|
PGD009S030BSR01 |
Rear |
9 |
0.018 - 0.028 |
|
|
|
|
|
|
PGD015S030BSA01 |
90° Angle |
15 |
0.018 - 0.028 |
|
PGD015S030CSA01 |
90° Angle |
15 |
0.030 - 0.040 |
|
PGD015S030CSF01 |
Front |
15 |
0.030 - 0.040 |
|
PGD015S030BSR01 |
Rear |
15 |
0.018 - 0.028 |
|
PGD025S030BSA01 |
90° Angle |
25 |
0.018 |
- 0.028 |
PGD025S030CSA01 |
90° Angle |
25 |
0.030 |
- 0.040 |
PGD025S030CSF01 |
Front |
25 |
0.030 |
- 0.040 |
PGD025S030BSR01 |
Rear |
25 |
0.018 |
- 0.028 |
PGD037S030BSA01 |
90° Angle |
37 |
0.018 |
- 0.028 |
PGD037S030CSA01 |
90° Angle |
37 |
0.030 |
- 0.040 |
PGD037S030CSF01 |
Front |
37 |
0.030 |
- 0.040 |
2Tested at 5 VDC
3Tested at 8 kV, Direct Contact, IEC 61000-4-2 ESD Waveform
90° Angle Mount
Front Mount
4
PULSEGUARD® |
SUPPRESSORS |
|
|
183
w w w . l i t t e l f u s e . c o m