LifeSpan Workplace DT-3, Workplace DT-5, Workplace DT-7 Owner's Manual

Download

Page 1

Table of Contents

Welcome Warranty

DT-5 Desk

Assembly Instructions Desk Leveling and Height Adjustment

DT-7 Desk

Assembly Instructions Desk Leveling and Height Adjustment

DT-5 Manual Treadmill Desk Assembly DT-7 ElectricTreadmill Desk Assembly DT-3 Console Assembly

4 5

Getting Started

Desk Assembly

Console Overview Innovative Features Troubleshooting Personal Settings

Bike Desk Operations

Treadmill Desk Operations

Console Overview Innovative Features Troubleshooting Personal Settings

14 19

20 21 22

24 26 28 30 32

36 38 39 40 42

Treadmill/Bike Desks: DT-3/DT-5/DT-7

Version 5.1

OWNERS MANUAL

Page 2

Welcome

Congratulations on choosing the LifeSpan Workplace line of products. These products give you the opportunity to remain productive while taking care of yourself as you integrate movement with normally sedentary tasks.

The average American now spends eleven hours, ve days a week, sitting, and burns one-hundred fewer calories each day than they did a few decades ago. Sitting for long periods slows your metabolism, reduces calories burned, and increases your risk for heart disease and diabetes.

Whether you plan on placing this product in a TV room, replace your desk at home or are adding another workspace in the office, the LifeSpan Workplace products are a great way to add movement to an otherwise sedentary activity.

Before you assemble or operate your product, please read this manual thoroughly. Important information, including safety precautions, ongoing product maintenance, assembly instructions, and information on proper operation are included.

If you need to contact LifeSpan customer service, visit our website at www.LifeSpanFitness.com and select customer service. Complete the information requested and we will respond to your inquiry within one business day. In the United States and Canada you can also call (877) 654-3837 and choose option 4.

Remember that some types of services should only be performed by a qualied service technician.

Neither LifeSpan nor its representatives can accept responsibility

for any damages or injury incurred as a result of information

presented in this manual except under the terms of the product

warranty.

The LifeSpan Workplace products come with the following

warranties, valid in the United States and Canada only.

Warranty DT-3 DT-5 DT-7

Frame NA Lifetime Lifetime Parts 2 Year 2 Years 2 Years

Replacement

Labor NA 1 Year 1 Year

LifeSpan warrants that the equipment it manufactures is free from

defects in material workmanship under normal use and service.

The periods above are based on the date of purchase. During these periods, LifeSpan will repair or replace any defective part. Free labor is included for the first year on all parts that are not normally assembled or replaced by the customer. Customer may be responsible to pay for the service technician’s travel time, where travel time exceeds twenty miles (thirty-two kilometers).

If within the time frames specied above, any part fails to operate properly, log on to our web site at www.LifeSpanFitness.com, click on the customer service link and complete the form to request assistance. To speak with a customer service agent, call (877) 654-3837 option 4.

LifeSpan reserves the right to make changes and improvements to our products without incurring any obligations to similarly alter any product purchased. In order to honor our product warranty and to ensure the safe and ecient operation of your LifeSpan product, only authorized parts can be used. The warranty is void if any parts other than those provided by LifeSpan are used.

Warranty

Page 3

Exclusions and Limitations:

• This warranty does not apply to any defects caused by negligence, misuse, improper assembly or maintenance, accident, or an “act of god”.

• This warranty does not apply to discoloration of paint or plastics.

• LifeSpan shall not be responsible for incidental or

consequential damages.

• This warranty is nontransferable from original owner.

Registration (U.S. and Canada Only)

You must register your LifeSpan product before a warranty claim can be processed. To complete your registration online, go to www.LifeSpanFitness.com and click on product registration or ll out the warranty card provided and mail today. Registration cards must be completed and sent to LifeSpan within thirty days of purchase to activate the product warranty. Product warranties are not valid unless the registration is properly completed and received within thirty days.

Warranty

U.S. and Canada

PO Box 981316 Park City, Utah 84098-1316 Phone: (877) 654-3839 Fax: (801) 973-9923

www.LifeSpanFitness.com

International

Contact your local distributor

Page 4

DT-5 Desk: Assembly Instructions

Item Number Description

1 2 3 4 5 6 7 8

9 10 11 12

A B C D

Lift Frame Desktop Left Base Foot Right Base Foot M8 Washer (Pre-installed) M10 Acorn Nut (Pre-installed) Height Adjustment Knob LifeSpan Placard (Pre-installed) M8*45L Bolt (Pre-installed) M8 Nuts (Pre-installed) Wire Cover M10 Washer (Pre-installed)

Desk Position Bumpers Extension Tube Desktop Mounting Bracket Stop Bumper Bike Safety Key Treadmill Safety Key

At LifeSpan we strive to make our equipment easy to assemble and start using. Parts that can be pre-assembled are always assembled and tested on the product line.

Prior to starting the assembly process, take all the parts out of the box, remove plastic bags and lay everything out on the oor to become familiar with the components.

Since your desk is a heavy piece of equipment, it is recommended that you use two people during assembly and follow these assembly instructions to reduce any problems that may occur.

Included Hardware

Wrench-17mm

Table corresponds to the diagram on the left

DT-5 Desk: Assembly Instructions

Page 5

DT-5 Desk: Assembly Instructions

Step 1: Lift Frame Assembly

A. Position the lift frame (1), left

base foot (3) and right base foot (4) as shown in the gure to the right. Note the position of the Workplace logo as well as the right and left base feet.

B. Place the lift frame onto

the left and right base feet mounting bolts and install the M10 washer (5) and M10 acorn nut (6).

C. Tighten the four mounting

nuts.

Step 2: Install the Height Adjustment Knobs

A. Locate the height adjustment

knobs (7).

B. Screw the height adjustment

knobs into the lift frame (1) uprights as shown in the gure to the right.

C. Raise each extension tube (B)

to level 15 and tighten the height adjustment knobs (7).

Step 3: Desktop Assembly

A. Make sure the extension tube (B) is at level 15 (done in step 2C). B. Align the desktop on top of the extension tubes (B) so the wire

harness from the desktop frame is on the same side as the wire harness coming from the right extension tube. Gently lower the desktop support frame onto the desktop mounting bracket (C).

NOTE: Make sure the console wire harness or connector does not get caught or pinched between the mounting bracket and desktop frame.

DT-5 Desk: Assembly Instructions

C. Insert four M8*45L carriage bolts (9) through the mounting brackets.

Install four M8 washers (5) and nuts (10). Securely tighten the four M8 nuts.

D. Connect the two wire harness connectors.

NOTE: If the desktop tilts up and down slightly, re-tighten the four bolts/nuts inserted in step 3C.

Step 3C

Step 3D

Step 3C

Workplace Logo

Desk positioning bumpers facing inward

Page 6

Desk Leveling

The desk needs to be leveled prior to use. The desk comes with two adjustable feet that can be used to level the desk and eliminate rocking. If the desk is rocking on two of the feet, adjust the two front feet until all four feet are sitting securely on the oor.

Desk Adjustment Feet

Desk Height Adjustment

CAUTION: Remove all objects from the desktop prior to making height adjustments. We recommend using two people for the height adjustment.

A. Loosen the adjustment knobs

(A) on each upright by turning it no more than two turns counterclockwise.

B. While rmly holding each side of

the desktop, pull both adjustment knobs out and slowly raise or lower the desktop.

C. Release the adjustment knob as

the desired level is reached. The adjustment knob will click into place.

D. Check to make sure the desk

height is set at the same level on both sides. Turn the adjustment knobs clockwise to lock in place.

DT-5 Desk: Desk Leveling and Height Adjustment

DT-5 Desk: Assembly Instructions

Step 4: Attach the Wire Cover to the Right Extension Tube

A. Simply snap the cover (11) over the right extension tube (B). The

bottom of the cover will be resting on top of the stop bumper (D).

Safety Key

When using the DT-5 with a treadmill use safety key (F). When using the DT-5 with a bike please use safety key (E).

Page 7

DT-7 Desk: Assembly Instructions

Item Number Description

10 11 12

A B C

Lift Frame Desktop Left Base Foot Right Base Foot M8 Washer (Pre-installed) M10 Acorn Nut (Pre-installed) M8*45L Bolt (Pre-installed) M8 Lock Nut (Pre-installed) M8*15 Bolt (Pre-installed) Accessory Tray M10 Washer (Pre-installed) LifeSpan Placard

Desk Position Bumper Extension Tube Desktop Mounting Bracket Treadmill Safety Key Bike Safety Key

At LifeSpan we strive to make our equipment easy to assemble and start using. Parts that can be pre-assembled are always assembled and tested on the product line.

Prior to starting the assembly process, take all the parts out of the box, remove plastic bags and lay everything out on the oor to become familiar with the components.

Since your desk is a heavy piece of equipment, it is recommended that you use two people during assembly and follow these assembly instructions to reduce any problems that may occur.

Included Hardware

Wrench-5mm

Wrench-17mm

Table corresponds to the diagram on the left

DT-7 Desk: Assembly Instructions

Page 8

DT-7 Desk: Assembly Instructions

Step 1: Lift Frame Assembly

A. Position the lift frame (1),

left base foot (3) and right base foot (4) as shown in the figure to the right. Note the position of the Workplace logo as well as the right and left base feet.

B. Place the lift frame onto

the left and right base feet mounting bolts and install the M10 washer (11) and M10 acorn nut (6).

C. Tighten the four mounting

nuts.

Step 2: Accessory Tray Assembly

A. Remove the four screws

(9) pre-installed in the bottom of the upright assembly crossbar.

B. Line the holes in the

accessory tray (10) with the holes in the crossbar.

C. Install four M8 washers

and M8*15 bolts (9) and tighten.

Step 3: Desktop Assembly

NOTE: It is a good idea to use two people for this portion of the assembly in order to be sure wires are properly routed and do not get pinched while installing the desktop.

A. Remove the bolts (7),

washers (5), and nuts (8) pre-installed in the upright assembly posts.

B. Hold the desktop (2)

over the lift frame (1) and place the desk height control wire harness (15) and the console wire harness (14) into the center of the lift frame (1). Place the connector ends towards the center of the tray for easy access in the next steps of the assembly.

C. Set the desktop down

into the mounting brackets (C) on the extension tubes, align the mounting holes and re-install the hardware removed in step A.

D. Tighten the desktop mounting bolts/nuts.

DT-7 Desk: Assembly Instructions

Workplace Logo

Desk positioning bumpers facing inward

Page 9

Step 4: Height Adjustment/Console Harness Connections

A. Remove the two upper

screws (13) attaching the access panel for the height adjustment control unit.

B. Tilt down and pull

the access panel out several inches. There are harnesses pre-installed to the height controller, so do not try to fully remove.

C. Attach the round

connector (15) (placed in the center tray during desktop assembly) to the height controller port (16).

D. Connect the 7-pin

rectangular connectors (14) (one is placed in the center tray during desktop assembly and the other is pre-installed at the factory).

E. Re-attach the access panel

to the center tray and tighten the two screws removed in step A.

F. Plug the power cord into

the receptacle (19).

NOTE: Check to be sure all wires are carefully tucked into the center tray prior to tightening access panel screws to prevent harness damage.

DT-7 Desk: Assembly Instructions

Do Not

Remove Screws

Desk Leveling

Desk Height Adjustment

A. To raise the desk, press the up

or down arrow until the desk is at the desired height.

B. To save a height press and

hold the memory preset, one or two, button for three seconds. This will save the current height into memory.

C. The next time the desk

is used, simply press the memory preset to adjust the desk height to the previously saved setting.

DT-7 Desk: Desk Leveling and Height Adjustment

Desk Adjustment Feet

Desk

Height

Memory Pre-Sets

Safety Key

When using the DT-7 with a treadmill use safety key (F). When using the DT-7 with a bike please use safety key (E).

Page 10

Treadmill to DT-7 Desk Assembly

A. Position the pre-assembled treadmill as shown below. B. Lift the rear of the treadmill and roll it forward under the desk until

the treadmill positioning bumper (D) located on the treadmill are centered over the desktop positioning bumper (A) at the base of the uprights.

C. Plug the console electronics

cable into the desk D-connector and treadmill console port and tighten the thumb screws.

D. Plug the power cord into the

desk power receptacle and into a wall outlet.

E. Plug the power cord into the

treadmill power receptacle and wall outlet.

F. Turn the treadmill power

switch on and install the safety key into the front of the console.

Lift

Roll Forward

DT-7 Electric Treadmill Desk: Assembly Instructions

DT-5 Manual Treadmill Desk: Assembly Instructions

Treadmill to DT-5 Desk Assembly

A. Position the pre-assembled treadmill as shown below. B. Lift the rear of the treadmill and roll it forward under the desk until

the positioning bumpers (D) located on the treadmill are centered over the treadmill position bumper (A) at the base of the uprights.

Lift

Roll Forward

C. Plug the console connector from the desk into the treadmill console

port and tighten the thumb screws on the connector.

D. Plug the power cord into the treadmill power receptacle and turn

the power switch on. Be sure all connectors are plugged in prior to connecting the power cord.

E. Install the safety key into the front of the console.

Power Switch

Power Receptacle

Console Port

Power Switch

Power Receptacle

Console Port

Console Connector

Desk Power Receptacle

D-Connector

Console Connector

NOTE: Be sure all connectors are plugged in prior to connecting the power cord.

Treadmill Connections

Desk Connections

Page 11

DT-3 Console: Assembly Instructions

on/o switch

power receptacle

console port

After assembling the bike or treadmill, roll it to the desired location. Plug the console connector into the connector coming from the front of the treadmill or the bottom of the bike. Be sure to screw the two connectors together with the attached thumb screws.

NOTE: Do not plug the power cord into the equipment until the console is connected.

Time

Step/Level

Calories

Distance

Speed

Weight

TREADMILL DESK

OPERATIONS

NOTE: All desk and DT-3 connectors plug into the bike D-connector the same way.

Time

Step/Level

Calories

Distance

Speed

Weight

Safety Key

When using the DT-3 with a treadmill use safety key (F). When using the DT-3 with a bike please use safety key (E).

Page 12

Treadmill Desk Specications

Console

Readouts

Display Bluetooth

DT-3

Time, Steps, Calories, Distance, Speed LED Yes

Mechanics and Performance

Speed Range

Dimensions

Height Adjustment

User Height Range

Height Adjustment Method Desktop Material

Desktop Surface Maximum Load on Desktop

Desk Lift Speed Desk Height Memory

DT-3

0.4 - 4.0 mph

0.6 - 6.4 kph

12.5” W x 3” D x 2” H 32 cm W x 7.6 cm D x 5.1 cm H NA

NA NA

DT-5

Time, Steps, Calories, Distance, Speed LED Yes

DT-7

Time, Steps, Calories, Distance, Speed LED Yes

DT-5

0.4 - 4.0 mph

0.6 - 6.4 kph

46.75” W x 36.5” D

116.875 cm W x 91.25 cm D 41” to 55” 104 cm to 140 cm 4’10” to 6’8” 147 cm to 203 cm Manual 1” (2.54 cm) thick HD Composite Board Durable Laminate 180 lbs 82 kg NA NA

DT-7

0.4 - 4.0 mph

0.6 - 6.4 kph

46.75” W x 36.5” D

116.875 cm W x 91.25 cm D 40” to 53”

101.6 cm to 134.6 cm 4’10” to 6’8” 147 cm to 203 cm Electric 1” (2.54 cm) thick HD Composite Board Durable Laminate 180 lbs 82 kg 38 mm/second 2 Pre-Sets

Treadmill Desk Specications

Page 13

Treadmill Desk Console Overview

Starting the Treadmill Desk

1. Turn the On/O switch located on the front right corner of the treadmill to the on position.

2. Make sure the safety key is installed on the console.

3. The current user weight will be ashing on the display panel. Adjust your weight to obtain accurate calorie calculations.

4. Press the Start button to begin your workout. The console will start counting up from 00:00.

5. Press the Up/Down buttons to adjust speed.

NOTE: The display will show “----“ if the safety key is not installed.

NOTE: The steps are counted normally from 1 to 9,999 steps. After 9,999 steps, the display format changes to accommodate more than four digits. Take the number shown in the display and add a zero to the right for the correct number of steps.

Below are examples of what the display will read and what those numbers mean:

1001 = 10,010 steps 1005 = 10,050 steps 1100 = 11,000 steps

Console Buttons

1. Start/On – If the console is in sleep mode, press and hold this button for three seconds to turn the console on. Once the console is turned on, press to start the treadmill.

2. Enter/Mode – Press to switch between display readings (time, steps, calories, distance, and speed). Holding the Enter/Mode button will initiate a scan mode that rotates between display readouts every ve seconds. Press the button again to exit the scan mode.

3. Stop/Pause – Press to pause your workout. This will maintain your current workout data. To reset the console and current workout data, press and hold the Stop/Pause button for three seconds.

4. – Press to adjust your weight during setup mode or to change the treadmill speed during a workout.

5. Bluetooth – Press to turn on Bluetooth to pair with a personal computer.

Treadmill Desk Console Overview

DT-5 and DT-7

DT- 3

NOTE: Not all personal computers have a Bluetooth module. A Bluetooth adaptor can be purchased to work with your personal computer.

Page 14

Treadmill Desk Innovative Features

Intelli-GuardTM – This treadmill desk is equipped with our patented Intelli-Guard feature. This feature senses when you stop walking on the treadmill and for safety purposes, it automatically pauses the treadmill to avoid accidental falls which may result in injury. The IntelliGuard feature is triggered when the treadmill senses you are no longer walking.

CAUTION: The Intelli-Guard feature will automatically be disengaged when the treadmill desk is operated at speeds under

1.0 mph (1.6 kph). If the speed is within these parameters, the step count will ash. When the display for the step count ashes, the treadmill desk will no longer auto-pause. CAUTION: At twenty seconds, the console will beep once per second for ve seconds and then automatically pause the treadmill desk. These beeps are a caution that the treadmill belt is about to stop. If for some reason you are still on the treadmill desk when this occurs, move your feet to the side rails and prepare for the belt to stop. The Intelli-Guard feature does not replace the use of your safety key or taking proper precaution in stopping the treadmill desk when it is not in use.

Intelli-StepTM – This treadmill desk comes with our patented Intelli-Step counting feature. This feature senses the resistance on the walking belt each time your foot strikes. There are several factors that will aect the accuracy of this feature including your walking style, your weight, and your usage characteristics. For example, the Intelli-Step feature will have a dicult time picking up the steps of a light user (under 110 lbs/50 kg) or at speeds lower than 1 mph (1.6 kph).

Treadmill Desk Innovative Features

Audible Safety Alert – This treadmill desk has an audible alert to notify the user when the treadmill desk is starting as well as when the speed is being adjusted.

The alert may be distracting in an oce setting and can be turned o. Please see the Personal Settings section (page 32) for instructions on how to do so.

CAUTION: If the audible safety alert is turned o, the alert for the Intelli-Guard feature will also be disabled.

Bluetooth

– The Workplace series consoles include a Bluetooth module to support LifeSpan apps. All apps can be downloaded from the LifeSpan Fitness Club. Apps show real time results for steps, calories, distance, and time on your computer.

Charging Port (DT-3 Only) – This port can be used to charge your wireless mobile devices.

NOTE: You will not be able to save your workout data to a USB via this port; it is used for charging purposes only.

Page 15

Treadmill Desk Troubleshooting

Problem

Solution

Problem Solution

Problem

Solution

Problem Solution

Problem

Solution

Only the weight LED is dimly lit. Pressing the start button will make the screen ash. The treadmill desk is in sleep mode. Press and hold the On/Start button for three seconds to power on the unit.

The console is erratic or not lighting up. Check to make sure the treadmill desk is properly plugged in. Turn the power switch o and back on again and make sure the safety key is in place. Make sure the connectors located in the front of the treadmill and under the desktop are fully plugged in. If the problem persists contact LifeSpan customer service.

The treadmill motor seems strained or E1 comes up after several minutes of use. The silicone lubricant that is applied to the deck and belt is wearing down and the belt needs to be lubricated with 100% silicone spray (non-aerosol).

The treadmill automatically pauses during a workout. The treadmill is not picking up the step count. Go into the Personal Settings section (page 32) to turn the IntelliGuard feature o.

The treadmill speed doesn’t feel right (either too fast or too slow). Go into the Personal Settings section (page 32) and check if you are in Metric or English mode. If you are in the correct mode, contact LifeSpan customer service.

The LifeSpan Treadmill Desk is designed and manufactured to be reliable and easy to use. However, if you have a problem, these troubleshooting steps may help you nd the cause.

Problem Solution

Problem

Solution

Problem

Solution

Problem Solution

“Uart” appears in the display. Turn the treadmill desk power switch o. Unplug and re-plug the connections made in step 3C and 3D during assembly (DT-5) or step 4C and 4D (DT-7). Make sure the thumb screws are properly tightened. Turn the treadmill desk power back on and check to see if it functions properly.

“dc-6” appears in the display. Turn the treadmill desk power switch o. Unplug and re-plug the connections made in step 3C and 3D during assembly (DT-5) or step 4C and 4D (DT-7). Make sure the thumb screws are properly tightened. Turn the treadmill desk power back on and check to see if it functions properly.

The console isn’t connecting to personal computer via Bluetooth. Log into your LifeSpan Fitness Club account. Click on the Frequently Asked Questions link located at the bottom of the homepage. If further assistance is needed, please email coordinator@LifeSpanFitness.com.

The treadmill desk does not go into sleep/energy saving mode. In order for the unit to go into sleep/energy saving mode, press and hold the stop button for three seconds to reset the console. After ten minutes the console will go into sleep/energy saving mode.

The desktop surface is not level. Check to make sure the base feet are on a level surface. For a DT-5, make sure each extension tube is raised to the same height number as shown on the extension tube. For a DT-7, run callibration by pressing and holding the height adjustment buttons similtaneously for three seconds

Treadmill Desk Troubleshooting

Page 16

Treadmill Desk Personal Settings

To enter Personal Settings mode, press and hold the Stop/Pause button simultaneously with the button. After three seconds, F001 should show in the display.

1. To change between English and Metric mode, press the button until F014 shows in the display. Press enter and either EN or SI will then appear in the display. To change to EN (miles) press the button. To change to SI (kilometers) press the button. Press enter and remove and re-install the safety key.

2. To turn the Intelli-Guard feature on or o, press the button until F012 shows up in the display. Press enter so on/o appears in the display. Press the button to turn Intelli-Guard o, or press the button to turn Intelli-Guard on. Press enter and remove and re-install the safety key.

3. To turn the Audible Alert on or o, press the button until F015 shows in the display. Press enter so on/o appears in the display. Press the button to turn the audible alert o or press the button to turn the audible alert on. Press enter and remove and re-install the safety key.

4. To change the allowable maximum speed from 4 mph (6.4 kph) to 2 mph (3.2 kph), press the button until F018 appears in the display. Press enter and 4.00 will show by default. Press the button and

2.00 will be displayed. Press enter and remove and re-install the safety key.

WARNING – The audible alert is turned on from the manufacturer to warn the user that the treadmill desk is starting or the speed is changing. Turning this alert o is done at the sole discretion of the user.

5. To start the treadmill at the speed it was going prior to pressing the pause button, press the button until F019 appears in the display. Press enter and by default the display shows “0”. Press the button to display a “1” and press enter. Remove and re-install the safety key.

6. To nd the running total distance you have walked, press the or button until F016 shows in the display. Press enter and the total distance will be displayed.

7. To nd the total hours the treadmill desk has run, press the or button until F017 shows in the display. Press enter and the total hours will be displayed.

Treadmill Desk Personal Settings

NOTE: Depending on the firmware the console has will determine if all of the options listed above will be available. LifeSpan reserves the right to make changes and improvements to our products without incurring any obligations to similarly alter any product purchased.

Page 17

BIKE DESK

OPERATIONS

Page 18

Console

Readouts

Display Bluetooth

DT-3

Time, Level, Calories, Distance, Speed LED Yes

Mechanics and Performance

Resistance Level Dimensions

Height Adjustment

Height Adjustment Method Desktop Material

Desktop Surface Maximum Load on Desktop

Desk Lift Speed Desk Height Memory

DT-3

16 Levels

12.5”W x 3”D x 2”H 32cm W x 7.6cm D x 5.1cm H NA

NA NA

Bike Desk Specications

DT-5

Time, Level, Calories, Distance, Speed LED Yes

DT-5

16 Levels

12.5”W x 3”D x 2”H

32cm W x 7.6cm D x 5.1cm H 41” to 55” 104 cm to 140 cm Manual 1” (2.54 cm) thick HD Composite Board Durable Laminate 180 lbs 82 kg NA NA

Bike Desk Specications

DT-7

Time, Level, Calories, Distance, Speed LED Yes

DT-7

16 Levels

12.5”W x 3”D x 2”H 32cm W x 7.6cm D x 5.1cm H 40” to 53”

101.6 cm to 134.6 cm Electric 1” (2.54 cm) thick HD Composite Board Durable Laminate 180 lbs 82 kg 38 mm/second 2 Pre-Sets

Page 19

Console Buttons

1. Start/On – If the console is in sleep mode, press and hold this button for three seconds to turn the console on. Once the console is turned on, press to start the console functions.

2. Enter/Mode – Press to switch between display readings (time, level, calories, distance, and speed). Holding the Enter/Mode button will initiate a scan mode that rotates between display readouts every ve seconds. Press the button again to exit the scan mode.

3. Stop/Pause – Press to pause your workout. This will maintain your current workout data. To reset the console and current workout data, press and hold the Stop/Pause button for three seconds.

4. – Press to adjust your weight during setup mode or to change the resistance level during a workout.

5. Bluetooth – Press to turn on Bluetooth to pair with a personal computer.

Bike Desk Console Overview

NOTE: Not all personal computers have a Bluetooth module. A Bluetooth adaptor can be purchased to work with your personal computer.

Starting the Bike Desk

1. If the display window is blank, turn the console on by pressing and holding the On button for three seconds.

2. The current user weight will be ashing in the display panel. Adjust your weight to obtain more accurate calorie calculations.

3. Press the Start button to begin your workout. The time will start counting up from 00:00.

4. Press the Up/Down buttons to adjust the resistance level.

Bike Desk Innovative Features

Bluetooth

Charging Port (DT-3 Only)– This port can be used to charge your wireless mobile devices.

NOTE: You will not be able to save your workout data to a USB via this port; it is used for charging purposes only.

Audible Safety Alert – The bike desk has an audible alert to notify the user when the cycle desk is starting as well as when the resistance level is being adjusted.

The alert may be distracting in an oce setting and can be turned o. Please see the Personal Settings section (page 42) for instructions on how to do so.

DT-3 Console shown here. DT-5/DT-7 Desks follow the same button layout.

Page 20

Problem

Solution

Problem Solution

The console is erratic or not lighting up. Recheck the power connection to the bike desk. Additionally, check the cable connection from the console to the bike. Contact LifeSpan customer service if this does not solve the problem.

The speed shown in the display feels too fast or too slow. Go into the Personal Settings section (page 42) and check if you are in Metric or English mode. If you are in the correct mode, contact LifeSpan customer service for assistance.

“Uart” shows in the display. Unplug the power from the bike desk. Disconnect and reconnect the console cable going into the bike desk. Plug the power back into the bike desk and retest. Contact LifeSpan customer service if this does not solve the problem.

This bike desk has been designed and manufactured to be reliable and easy to use. However, if you have a problem, these troubleshooting steps may help you nd the cause.

Bike Desk Troubleshooting

Problem Solution

“dc-6” shows in the display. Unplug the power from the bike desk. Disconnect and reconnect the console cable going into the bike desk. Make sure the thumb screws are properly tightened. Plug the power back into the bike desk and retest. Contact LifeSpan customer service if this does not solve the problem.

The desktop surface is not level. Check to make sure the base feet are on a level surface. For a DT-5, make sure each extension tube is raised to the same height number as showsn on the extension tube. For a DT-7, run callibration by pressing and holding the height adjustment buttons similtaneously for three seconds

Bike Desk Troubleshooting

Page 21

Bike Desk Personal Settings

To enter Personal Settings mode, press and hold the Stop/Pause button simultaneously with the button. After three seconds, F001 should show in the display.

1. To change between English and Metric mode, press the button until F009 shows in the display. Press enter and either EN or SI will appear in the display. To change to EN (miles) press the button. To change to SI (kilometers) press the button. Disconnect and reconnect the power to the bike.

2. To turn the Audible Alert on or o, press the button until F010 shows in the display. Press enter so on/o appears in the display. Press the button to turn the audible alert o or press the button to turn the audible alert on. Disconnect and reconnect the power to the bike.

3. To nd the running total distance you have pedaled, press the or button until F011 shows in the display. Press enter and the total distance will be displayed. Disconnect and reconnect the power to the bike.

4. To nd the total hours the bike has run, press the or button until F012 shows in the display. Press enter and the total hours will be displayed. Disconnect and reconnect the power to the bike.

5. To start at the resistance level set prior to pressing pause, press the button until F013 appears in the display. Press enter and by default the display shows “0”. Press the button to display a “1” and press enter. Disconnect and reconnect the power to the bike.

TREADMILL/BIKE DESK MODEL NUMBER – DT-3/DT-5/DT-7

LifeSpan Workplace DT-3, Workplace DT-5, Workplace DT-7 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual