GS2
1
LEG PRESS ADAPTER KIT
CLASS H
PAR T # 7358101
REV. A
Revision: 11/01/02
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
FOR GS1/GS2 GYM SYSTEM
Version: GS1-LP5A-101
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
NOTE: In a continual effort to improve our products, specifications are subject to change
2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Parts list..........................4
Assembly Instructions.....4-13
Insert-Registration Card
©
IMPORTANT NOTES
Please note:
Tools Required for Assembly
* Thank you for purchasing the ParaBody GS1/ GS2 Leg Press Adapter Kit. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* 9/16” wrench
* Ratchet with 9/16” socket
* Adjustable wrench
* T ape measure
3
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT .
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
PARTS LIST
4
NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM
SYSTEMS
PART #
ACU04-1450
ACU13-0140
ACU06-0024
ACU06-0362
ACUDC1250100020B
ACUDB2E03811000B
ACUDA1E03813416NB
QTY
1
1
7
1
9
14
3
PART #
ACUDA1E03823416NB
ACUDA1E03840016NB
ACUDA1E03843416NB
ACU08-0085
ACU08-0076
ACU08-0079
ACU02-0055
DESCRIPTION
3/8 X 2-3/4” BOL T
3/8 X 4” BOL T
3/8 X 4-3/4” BOL T
STEP SP ACER 19/32” LG
STEP SP ACER 1-19/32” LG
STEP SP ACER 1-11/16” LG
CABLE L CLIP
QTY
4
2
5
4
4
2
1
DESCRIPTION
FRONT LEG
LEG PRESS CABLE
3-1/2” PULLEY
2” COVER CAP
3/8” W ASHER
3/8” LOCKNUT
3/8 X 1-3/4” BOL T
KEY
8
9
10
11
12
13
14
KEY
1
2
3
4
5
6
7
FIGURE 1
STEP 1:
• Remove and discard the LEG CABLE by removing the bolts shown in FIGURE 1.
DISCARD!
CABLE
• Remove the bolts attaching the FRAME BRACE and CABLE to the BASE as shown in figure 1
Loading...