897104 WEIGHT STACK OPTION
ASSEMBLY INSTRUCTIONS
Part # 6819801 |
1 |
Revision: 2/17/99 |
IMPORTANT NOTES
Please note: WELCOME TO THE WORLD OF Serious steel!
*Thank you for purchasing the Parabody 897104 WEIGHT STACK OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your Parabody customer service representative at (800) 328-9714.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules:
1.Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury.
2.Do not allow minors or children to play on or around this equipment.
3.Exercise with care to avoid injury.
4.If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.
5.Consult a physician before beginning any exercise program.
Tools Required for Assembly
*3/4” wrench
*9/16” wrench
*5/32 Allen wrench
*Ratchet with 3/4” and 9/16” sockets
*Adjustable wrench
*Tape measure
Bolt Length Ruler
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
|
1/2 |
|
|||||||||||
0 |
|
|
1 |
|
|
2 |
|
|
3 |
|
|
4 |
|
|
5 |
|
6 |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2
PARTS LIST
KEY |
PART # |
DESCRIPTION |
QTY |
|
KEY |
PART # |
DESCRIPTION |
QTY |
1 |
6xxxx |
STACK BASE |
1 |
|
14 |
6480301 |
3/8” FLANGE SPACER |
4 |
2 |
6819403 |
STACK BOOM |
1 |
|
15 |
3102501 |
3/8” WASHER |
1 |
3 |
6819703 |
1-3/4” X 9-3/8” TUBE |
1 |
|
16 |
3102802 |
3/8” LOCK NUT |
2 |
4 |
6577801 |
77-1/4”GUIDEROD |
2 |
|
17 |
3102953 |
1/2 X 2-3/4” BOLT |
1 |
5 |
6284501 |
20 HOLEWEIGHTSTACK SHAFT |
1 |
|
18 |
3102918 |
1/2 X 3-1/4” BOLT |
1 |
6 |
3116201 |
3-1/2”PULLEY |
2 |
|
19 |
3102502 |
1/2” WASHER |
2 |
7 |
6660101 |
129-1/2”CABLE |
1 |
|
20 |
3102801 |
1/2” LOCK NUT |
2 |
8 |
6692601 |
3 X 2” END CAP |
4 |
|
21 |
3108002 |
WEIGHTSTACK CUSHION |
2 |
9 |
3103302 |
13/16” SHAFT COLLAR |
2 |
|
22 |
6595201 |
GUIDERODBUSHING |
2 |
10 |
6214401 |
WEIGHTSTACK SELECTOR PIN |
1 |
|
23 |
6382301 |
WEIGHTPLATE BUSHING (10 CT) |
4 |
11 |
6236701 |
1-3/4” SQ. END CAP |
1 |
|
24 |
6714601 |
HEAD PLATE |
1 |
12 |
3102901 |
3/8 X 1-1/4” BOLT |
1 |
|
25 |
6214501 |
WEIGHTPLATE |
20 |
13 |
3102922 |
3/8 X 2-3/4” BOLT |
2 |
|
26 |
6198501 |
WEIGHTSTACK LABELS (1-25) |
1 |
FIGURE 1 |
TOP BOOM |
CABLE |
1/4” QUICK LINK |
CARRIAGE |
STEP 1:
•Remove the CABLE and the 1/4” QUICK LINK from the CARRIAGE as shown in FIGURE 1.
•Remove CABLE and the 1/4” QUICK LINK from the TOP BOOM as shown in FIGURE 1 and discard. (NOTE: PULLEYS may have to be
loosened or removed to allow CABLE to pass through.)
3