Design Guide 2008
Freestanding / Semi Built In Models 30", 36" and 60"
Welcome
Liebherr's engineering excellence in Germany provides the largest selection of freezers, refrigerators and wine refrigerators worldwide.
Liebherr-appliances consistently specializes in the manufacturing of high quality freezers and refrigerators. With more than 300 basic models, we have the widest selection in the world. Liebherr appliances feature premium quality, numerous innovative product ideas and advanced design. Liebherr freezers and refrigerators are manufactured at three modern production plants:
Liebherr Marica in Bulgaria, Liebherr-Hausgeräte Ochsenhausen GmbH in Germany and the Liebherr-Hausgeräte Lienz GmbH in Austria.
We produce more than 2.3 million quality freezers, refrigerators and wine refrigerators each year, and these are sold all over the world. LiebherrHausgeräte Ochsenhausen GmbH in Germany makes over 1,100,000 appliances a year and employs 1,900 people. The Liebherr-Hausgeräte Lienz GmbH manufactures more than 700,000 freezers and refrigerators and employs 1,500 people.
The appliances for the North American market are produced in Austria and in Germany.
Liebherr is commited to the protection of the environment and recognizes it as a critical priority. To guarantee an optimum and consistent implementation, all ecological aspects were observed and integrated into the quality control of Liebherr in compliance with DIN EN ISO 9001.
Liebherr's Commitment to the Environment
The components of Liebherr products can be recycled when the necessary resources are applied. A concern for the environment and a desire to protect resources has lead to increased levels of recycling year after year. When Liebherr manufactures products, it is essential that the recyclable recovery rate of the materials we use constantly increases.
Recycling is a common goal among all manufacturers, municipalities and recycling companies to protect our environment. Protecting the environment and producing products which have a low impact on the environment, is one of Liebherr's core values. Whether you are replacing a unit or starting fresh, remember to dispose of your old appliance in an environmentally safe and friendly manner.
Introduction
LIEBHERR WARRANTY PLAN
FULL TWO YEAR WARRANTY - For two years from the date of original purchase, your Liebherr Warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship.
FULL FIVE YEAR WARRANTY - For five years from the date of original purchase, your Liebherr Warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. The "Sealed System" means only the compressor, condenser, evaporator, drier and all connecting tubing.
LIMITED 6TH THROUGH 12TH YEAR WARRANTY - From the 6th through 12th year from the date of original purchase, your Liebherr Warranty covers all parts that prove to be defective in materials or workmanship in the sealed system (parts only).
Customer Service
If your appliance is not working properly, or if the temperature display reads "F0" to "F5”, please call the numbers listed below.
Give the fault number displayed, together with the
Type Designation,
Service Number and
Appliance Number (Serial Number)
from the model plate, to ensure prompt, accurate servicing. The model plate is located inside the appliance.
Leave the appliance door closed until the customer service technician arrives to minimize any further cold loss.
For Service and Parts in the U.S.:
Liebherr Service Center
15545 N. 77th Street
Scottsdale, AZ 85260
Phone: |
(480) 998-0141 |
Fax: |
(480) 998-7877 |
Toll Free: |
1-866-LIEBHERR or |
|
1-866-543-2437 |
www.liebherr-appliances.com
For Service and Parts in Canada:
Euro Parts
579 Campbell Street,
P.O. Box 759,
Lucknow, Ontario, N0G 2H0
Phone: (519)528-5005 Fax: (519)528-5001
Toll Free: 1-888-Liebherr or
1-888-543-2437
www.euro-parts.ca
Contents
General Remarks
Safety Warnings |
I |
Electrical Requirements & Safety |
II |
IceMaker (if equipped) |
III |
Area Requirements |
IV |
Safety Regulations |
V |
Freestanding/Semi Built In Models
30", 36" and 60" Models: CS 16.., CS 2062, SBS 32S0 |
1 |
Unit Dimensions |
3 |
Cabinet Opening Dimensions |
5 |
Ventilation Requirements |
7 |
Top Door Hinge Clearance CS 16.. - SBS 32S0 |
9 |
Top Door Hinge Clearance CS 2062 |
11 |
General Remarks
I. Safety Warnings
PLEASE READ AND FOLLOW THESE INSTRUCTIONS
This design guide contains Warning and Caution statements. This information is important for safe and efficient installation.
This design guide is not replacing the use and care manual which contains important information on how to use Liebherr appliances.
Always read and follow all Warning and Caution statements!
States a hazard that may cause serious injury or death if precautions are not followed.
Signals a situation where minor injury or product damage may occur if you do not follow instructions.
States a hazard will cause serious injury or death if precautions are not followed.
IMPORTANT
This highlights information that is especially relevant to a problem-free installation.
Make sure incoming voltage is the same as the unit rating.
To reduce the risk of fire, electric shock, or personal injury, the installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire rated construction.
To the Installer
It is very important that the guidelines and instructions are followed in this design guide to ensure proper installation and operation of the unit. The Installation Guidelines section contains important information for making sure the installation is correct. Read and understand all the information and installation guidelines in this manual before the unit is installed.
It is also very important to know the Safety Information.
Loading...