HS885HD
Technical data
Hydraulic crawler crane
Complies with ANSI B 30.5
HS 885 HD
Dimensions
4´7´´
11´1´´
26´5´´
22´2´´
14´1´´
5´2´´
7´9´´
27´2´´
9´3´´
R 18´2´´
50´
17´
39.4´´
18´10´´
21.6´´
56´´
11´
Basic machine with undercarriage
Operating weight
The operating weight includes the basic machine with HD undercarriage,
2 main winches 66,200 lbs with speed change gear and 36 f t boom,
consisting of A–frame, boom foot (13 ft), boom head section (21 ft),
boom head (2 ft) and 53,200 lbs basic counterweight, 33,900 lbs add.
counter weight and 15,400 lbs carbody counterweight.
Total weight approx. 296,700 lbs
Ground pressure
Ground bearing pressure over side, on compact ground 24 psi
Equipment
Main boom max. length 184 f t
Fixed jib (N o. 080 6.xx) 36 ft – 105 f t
Universal boom head with interchangeable rope pulleys.
Modular designed equipment for operation as crane, with dragline or
clamshell. For dragline operation, a rotating fairlead is fitted into the
boom foot. This minimizes the rope angle to drum, which results in
lower rope wear.
Remarks
The lifting capacities stated are valid for lifting operation only
1.
(corresponds with crane classification according to F.E.M. 1.001,
crane group A1)
Crane standing on firm, horizontal ground.
2.
The weight of the lifting device (hoisting ropes, hook block, shackle
3.
etc.)must be deducted from the gross lifting capacity to obtain
a net lifting value.
Additional equipment on boom (e.g. boom walkways, auxiliary jib)
4.
must be deducted to get the net lifting capacity.
For max. wind speed please refer to lift chart in operator’s cab or
5.
manual.
Working radii are measured from centre of swing and under load.
6.
The lifting capacities are valid for 360 degrees of swing.
7.
The structures are calculated according to F.E.M. 1.001 – 1998
8.
(EN 13001–2/ 2004).
ANSI B 30.5
9.
2 HS 885 HD
Transport dimensions and weights
27´
45.3´´
11´1´´
12´
Basic machine and boom
Basic machine
with HD undercarriage, V12- Mercedes Benz diesel engine, 2x66,200 lbs
winches with change gear box, without counterweight, coom foot and
A–frame
Width 16´2´´
Weight 96,700 lbs
Crawler
Double grouser track shoes 39.4´´
Width 41.7´´
Weight 41,300 lbs
A–frame
Width 24´´
Weight 4,850 lbs
Boom foot
Width 5´5´´
Weight* 4,600 lbs
Boom section 10 ft
Width 5´5´´
Weight* 1,700 lbs
Boom section 20 ft
Width 5´5´´
Weight* 2,750 lbs
Boom section 30 ft
Width 5´5´´
Weight* 3,700 lbs
Boom section 40 ft
Width 5´5´´
Weight* 4,700 lbs
Boom head section 21 ft
Width 9´9´´
Weight* 11,900 lbs
Boom head B A
Width 30.7´´ 42.1´´
Weight* 3,300 4,000 lbs
*) Including pendant ropes
L–boom head
Width 5´5´´
Weight* 2,600 lbs
HS 885 HD 3
Transport dimensions and weights
Fixed jib (No.
0806.xx)
)
*
Including pendan
t s
traps
Fixed jib head (No.
Width
Weight
in lbs*
Fixed jib section (No.
Width
Weight
in lbs*
Fixed jib section (No.
Width
Weight
in lbs*
0
806.xx)
0
806.xx
0
806.xx
)
)
Fixed jib foot with A-frame (No.
Width
Weight
in lbs*
0
806.xx)
45”
980
10 ft
37”
245
20 ft
37”
430
59”
2,050
4HS
885 HD
Transport dimensions and weights
Counterweight
Add.
counterweight II
Carbody counterweight
Basic counterweight
Add.
counterweight
Add.
counterweight
Add.
counterweight IV
III
Basic counterweight 1x
Width
Weight
in lbs
28.3”
43,200
Add. counterweight 1x
Width
Weight
in lbs
26”
10,000
Add. counterweight II 2x
Width
Weight
in lbs
13.4”
5,725
Add. counterweight III 1x
Width
Weight
in lbs
14.8”
7,050
Add. counterweight IV 1x
Width
Weight
in lbs
22.8”
15,400
Carbody counterweight 2x
Width
Weight
in lbs
7,700
8”
Hooks
264,600 lbs hook block-2sheaves
Width
Weight
in lbs
12.6”
3,100
132,300 lbs hook block-1sheave
Width
Weight
in lbs
12”
2,150
66,150 lbs single hook
Width
Weight
in lbs
HS 885 HD
16”
880
5
Loading...