Installation Instructions
For “NoFrost” Combined Refrigerator-Freezers with IceMaker
CS/CBS 20 7084 337-00
Important
Please Read and Follow these Instructions
These instructions contain Danger, Warning and Caution notes.
This information is important for safe and efficient installation and operation.
Always read and comply with all Danger, Warning and Caution notes!
DANGER!
Danger indicates a hazard which will cause serious injury or death if precautions are not followed.
WARNING!
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION!
Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
This indicates information that is especially relevant to a problem-free installation and operation.
Note to the Installer
It is very important to follow the instructions in the manual to ensure proper installation and operation of the unit.
Before installing the unit, be sure to thoroughly read and understand all of the information in this manual.
Contents |
Page |
||
Unit dimensions.............................................................. |
|
4 |
|
Unit venting..................................................................... |
|
4 |
|
Cabinet opening dimensions......................................... |
|
5 |
|
Mounting the anti tipping device on concrete floors...... |
6 |
||
Mounting the anti tipping device on wooden floors....... |
|
6 |
|
Mounting the anti tipping device in cabinets |
|
|
|
deeper than 24".............................................................. |
|
7 |
|
Mounting the top anti tipping bracket............................. |
|
7 |
|
Ice Maker |
|
|
|
Safety instructions and warnings................................... |
|
8 |
|
Water connection Requirements................................... |
|
8 |
|
Water connection Adapter.............................................. |
|
8 |
|
Connection to the water supply..................................... |
|
9 |
|
Leveling the appliance................................................. |
|
10 |
|
Adjusting the front of the drawer.................................. |
|
10 |
|
Mounting the ventilation grille...................................... |
|
11 |
|
Top door hinge clearance............................................. |
|
11 |
|
R600a Refrigerant |
|
|
|
|
WARNING! |
|
|
|
The refrigerant contained within the |
|
|
|
appliance R600a is environmentally |
|
|
|
friendly, but flammable. Leaking |
|
|
|
refrigerant can ignite. |
|
|
To prevent possible ignition |
|
|
|
follow the warnings below: |
|
|
|
• |
Keep ventilation openings, in |
|
|
|
the appliance enclosure or in |
|
|
|
the built-in structure, clear of |
|
|
|
obstruction. |
|
|
• |
Do not damage the refrigerant |
|
|
|
circuit. |
|
|
•Any repairs and work on the appliance should only be performed by the customer service department.
2
Safety
Disposal of Old Appliance
DANGER!
Risk of child entrapment.
Child entrapment and suffocation are not problems of the past.
Junked or abandoned refrigerators are still dangerous – even if they will sit for “just a few days.”
If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.
Before you discard old appliances:
•Remove the doors.
•Leave the shelves in place so that children may not easily climb inside.
•Cut off the power cable from the discarded refrigerator. Discard separately from the refrigerator.
•Be sure to follow your local requirements for disposal of appliances.
Contact the trash collection agency in your area for additional information.
Disposal of Carton
The packaging is designed to protect the appliance and individual components during moving and is made of recyclable materials.
WARNING!
Keep packaging materials away from children. Polythene sheets and bags can cause suffocation!
Please recycle packaging material where facilities are available.
Electrical Safety
Connect this appliance to a 15 amp or 20 amp, 110120 VAC, circuit which is grounded and protected by a circuit breaker or fuse.
We recommend using a dedicated circuit for this appliance to prevent circuit overload and the chance of interruption to the appliance.
This appliance is equipped with a three-prong (grounding) polarized plug for your protection against possible shock hazards.
Where a two-prong wall receptacle is encountered, contact a qualified electrician and have it replaced with a properly grounded three-prong receptacle in accordance with all local codes and ordinances.
WARNING!
Electrocution hazard.
Electrical grounding required.
• Do not remove the round grounding 
prong from the plug. 
• Do not use extension cords or ungrounded (two prong) adapters.
•Do not use a power cord that is frayed or damaged.
•Do not use a power strip. 
Failure to follow these
instructions may result in fire, electrical shock or death.
Blocking for Safety
WARNING!
To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
3
Planning Information
Unit Dimensions - Figure 1 |
Unit Venting - Figure 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A = 3-17/32" (90 mm) |
||
|
|
|
|
|
|
|
|
|
|
B = 79-13/16" (2027 mm) |
||
|
|
|
|
|
|
|
|
|
||||
Figure 1 |
|
C = 35-13/16" (910 mm) |
||||||||||
|
D = 13-9/16" (344 mm) |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
E = 24-7/32" (615 mm) |
||
|
|
|
|
|
|
|
|
|
|
G = 40-13/16" (1037 mm) |
||
|
|
|
|
|
|
|
|
|
|
H = 39-7/16" (1002 mm) |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Door swing clearence - Figure 2
Please allow for door swing clearance at locations next to a wall.
Figure 2
CS 20 appliances do not require any ventilation openings in the cabinet. The required airflow is directed through the toe kick area.
Figure 3
It is important to use the provided cover grille for the ventilation opening. This opening must not be covered with a cabinet base.
4
Loading...